Tellurium Compounds

Tellurium compounds are compounds containing the element tellurium (Te). Tellurium belongs to the chalcogen (group 16) family of elements on the periodic table, which also includes oxygen, sulfur, selenium and polonium: Tellurium and selenium compounds are similar. Tellurium exhibits the oxidation states −2, +2, +4 and +6, with +4 being most common.

Tellurides

Reduction of Te metal produces the tellurides and polytellurides, Te_n²⁻. The −2 oxidation state is exhibited in binary compounds with many metals, such as zinc telluride, , produced by heating tellurium with zinc. Decomposition of with hydrochloric acid yields hydrogen telluride (), a highly unstable analogue of the other chalcogen hydrides, , and :

is unstable, whereas salts of its conjugate base eHsup>− are stable.

Halides

The +2 oxidation state is exhibited by the dihalides, , and . The dihalides have not been obtained in pure form, although they are known decomposition products of the tetrahalides in organic solvents, and the derived tetrahalotellurates are well-characterized:

where X is Cl, Br, or I. These anions are square planar in geometry. Polynuclear anionic species also exist, such as the dark brown , and the black .

With fluorine Te forms the mixed-valence and . In the +6 oxidation state, the structural group occurs in a number of compounds such as , , , and . The square antiprismatic anion is also attested. The other halogens do not form halides with tellurium in the +6 oxidation state, but only tetrahalides ( , and ) in the +4 state, and other lower halides (, , , and two forms of ). In the +4 oxidation state, halotellurate anions are known, such as and . Halotellurium cations are also attested, including , found in .

Oxocompounds

Tellurium monoxide was first reported in 1883 as a black amorphous solid formed by the heat decomposition of in vacuum, disproportionating into tellurium dioxide, and elemental tellurium upon heating. Since then, however, existence in the solid phase is doubted and in dispute, although it is known as a vapor fragment; the black solid may be merely an equimolar mixture of elemental tellurium and tellurium dioxide.

Tellurium dioxide is formed by heating tellurium in air, where it burns with a blue flame. Tellurium trioxide, β-, is obtained by thermal decomposition of . The other two forms of trioxide reported in the literature, the α- and γ- forms, were found not to be true oxides of tellurium in the +6 oxidation state, but a mixture of , and . Tellurium also exhibits mixed-valence oxides, and .

The tellurium oxides and hydrated oxides form a series of acids, including tellurous acid (), orthotelluric acid () and metatelluric acid (). The two forms of telluric acid form ''tellurate'' salts containing the TeO and TeO anions, respectively. Tellurous acid forms ''tellurite'' salts containing the anion TeO.

Other chalcogenides

A disulfide, TeS₂, forms when tellurous acid () is mixed with hydrogen sulfide, but is unstable above −20 °C. In contrast, many thiotellurate anions are known, including , Te(S₅)(S₇) (). Many of these arise from the action of tellurium metal on polysulfide anions, although a solid-state synthesis is also possible. Despite their similarities to sulfo-selenide anions, the thiotellurates are not catenation products; instead, the sulfur ligands coordinate to the tellurium as heavier congeners to a tellurate. A thiosubtellurite, , is also known. These compounds are of interest because of their potential for ionic conductivity.

Analogous selenotellurates are also known.

Zintl cations

When tellurium is treated with concentrated sulfuric acid, the result is a red solution of the Zintl ion, . The oxidation of tellurium by in liquid produces the same square planar cation, in addition to the trigonal prismatic, yellow-orange :

Other tellurium Zintl cations include the polymeric and the blue-black , consisting of two fused 5-membered tellurium rings. The latter cation is formed by the reaction of tellurium with tungsten hexachloride:

Interchalcogen cations also exist, such as (distorted cubic geometry) and . These are formed by oxidizing mixtures of tellurium and selenium with or .

Organotellurium compounds

Tellurium does not readily form analogues of alcohols and thiols, with the functional group –TeH, that are called tellurols. The –TeH functional group is also attributed using the prefix ''tellanyl-''. Like H₂Te, these species are unstable with respect to loss of hydrogen. Telluraethers (R–Te–R) are more stable, as are telluroxides.

Tritelluride quantum materials

Recently, physicists and materials scientists have been discovering unusual quantum properties associated with layered compounds composed of tellurium that's combined with certain rare-earth elements, as well as yttrium (Y).

These novel materials have the general formula of ''R'' Te₃, where "''R'' " represents a rare-earth lanthanide (or Y), with the full family consisting of ''R'' = Y, La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er & Tm (not yet observed are compounds containing Pm, Eu, Yb & Lu). These materials have a two-dimensional character within an orthorhombic crystal structure, with slabs of ''R'' Te separated by sheets of pure Te.

It is thought that this 2-D layered structure is what leads to a number of interesting quantum features, such as charge-density waves, high carrier mobility, superconductivity under specific conditions, and other peculiar properties whose natures are only now emerging.

For example, in 2022, a small group of physicists at Boston College in Massachusetts led an international team that used optical methods to demonstrate a novel axial mode of a Higgs-like particle in ''R'' Te₃ compounds that incorporate either of two rare-earth elements (''R'' = La, Gd). This long-hypothesized, axial, Higgs-like particle also shows magnetic properties and may serve as a candidate for dark matter.

See also

* Sulfur compounds
* Selenium compounds
* Polonium compounds

References

{{Tellurium compounds

compounds

Chemical compounds by element