Cape Dory 330
   HOME

TheInfoList



OR:

The Cape Dory 330 is an American
sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...
that was designed by
Carl Alberg Carl Alberg (11 April 1901 – 31 August 1986) was a Swedish born naval architect known for his influence in early fiberglass boats. Career Alberg moved to the United States in 1925 where he began working as a rigger then later as a spar (sa ...
as a
cruiser A cruiser is a type of warship. Modern cruisers are generally the largest ships in a fleet after aircraft carriers and amphibious assault ships, and can usually perform several operational roles from search-and-destroy to ocean escort to sea ...
and first built in 1985. The Cape Dory 330 is a development of the Cape Dory 33, with a
bowsprit The bowsprit of a sailing vessel is a spar (sailing), spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay that counteracts the forces from the forestay, forestays. The bowsprit’s purpose is to create ...
and
cutter rig A cutter is any of various types of watercraft. The term can refer to the rig (sail plan) of a sailing vessel (but with regional differences in definition), to a governmental enforcement agency vessel (such as a coast guard or border force cutt ...
, plus interior changes.


Production

The design was built by Cape Dory Yachts in the
United States The United States of America (USA), also known as the United States (U.S.) or America, is a country primarily located in North America. It is a federal republic of 50 U.S. state, states and a federal capital district, Washington, D.C. The 48 ...
. The company built 27 examples of the type between 1985 and 1988, but it is now out of production.


Design

The Cape Dory 330 is a recreational
keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...
, built predominantly of
fiberglass Fiberglass (American English) or fibreglass (English in the Commonwealth of Nations, Commonwealth English) is a common type of fibre-reinforced plastic, fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened i ...
, with wood trim. It has a
cutter rig A cutter is any of various types of watercraft. The term can refer to the rig (sail plan) of a sailing vessel (but with regional differences in definition), to a governmental enforcement agency vessel (such as a coast guard or border force cutt ...
, a spooned
raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...
, a
bowsprit The bowsprit of a sailing vessel is a spar (sailing), spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay that counteracts the forces from the forestay, forestays. The bowsprit’s purpose is to create ...
, a raised counter transom, a keel-mounted
rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...
controlled by a
wheel A wheel is a rotating component (typically circular in shape) that is intended to turn on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machin ...
and a fixed long
keel The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...
. It displaces and carries of ballast. The boat has a draft of with the standard keel fitted. The boat is fitted with an inboard engine for docking and maneuvering. The
galley A galley is a type of ship optimised for propulsion by oars. Galleys were historically used for naval warfare, warfare, Maritime transport, trade, and piracy mostly in the seas surrounding Europe. It developed in the Mediterranean world during ...
is located on the port side at the foot of the
companionway In the architecture of a ship, a companion or companionway is a raised and windowed hatchway in the ship's deck, with a ladder leading below and the hooded entrance-hatch to the main cabins. A companionway may be secured by doors or, commonly i ...
steps and includes a sink and two-burner stove. The
head A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple ani ...
is forward on the starboard side and has a privacy door. Accommodations include a bow "V"-berth and two main cabin settee berths. There is a folding dinette table and a chart table in the main cabin, too. The
mainsail A mainsail is a sail rigged on the main mast (sailing), mast of a sailing vessel. * On a square rigged vessel, it is the lowest and largest sail on the main mast. * On a fore-and-aft rigged vessel, it is the sail rigged aft of the main mast. T ...
is sheeted mid- boom to a mainsheet traveler on the cabin roof. The inner
jib A jib is a triangular sail that sets ahead of the foremast of a sailing vessel. Its forward corner (tack) is fixed to the bowsprit, to the bows, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main ty ...
is self- tacking and is boom mounted. The design has a
hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to- ...
of .


Operational history

The boat is supported by an active class club that organizes racing events, the ''Cape Dory Sailboat Owners Association''.


See also

*
List of sailing boat types The following is a partial list of sailboat types and sailing classes, including keelboats, dinghy, dinghies, and multihull (catamarans and trimarans). Olympic classes World Sailing Classes Historically known as the IYRU (International Yacht ...
Related development * Cape Dory 33 Similar sailboats *
Abbott 33 The Abbott 33 is a Canadian sailboat, that was designed by Jan Torben Larsen and Abbott Boats and first built in 1981. The Abbott 33 is a development of Larsen's SCAN-KAP 99 design, which was built in Denmark. Production The boat was built ...
* Alajuela 33 * Arco 33 * C&C 33 *
CS 33 The CS 33 is a Canadian sailboat, that was designed by Raymond Wall and first built in 1979. The design is out of production. Production The boat was built by CS Yachts in Canada between 1979 and 1987. The company built 450 examples of the des ...
*
Endeavour 33 The Endeavour 33 is an American sailboat, that was designed by Bruce Kelley and first built in 1983. Production The design was built by Endeavour Yacht Corporation in the United States between 1983 and 1986, but it is now out of production. ...
*
Hans Christian 33 The Hans Christian 33, also called the Hans Christian 33 Traditional and the Traditional 33, is a Taiwanese sailboat that was designed by Harwood Ives as a blue-water cruiser and first built in 1980.Sherwood, Richard M.: ''A Field Guide to Sai ...
* Hunter 33 * Hunter 33.5 * Mirage 33 * Nonsuch 33 * Tanzer 10 * Viking 33 * Watkins 33


References

{{Cape Dory Yachts Keelboats 1980s sailboat type designs Sailing yachts Sailboat type designs by Carl Alberg Sailboat types built by Cape Dory Yachts