A well intervention, or well work, is any operation carried out on an oil or gas well during, or at the end of, its productive life that alters the state of the well or well geometry, provides well diagnostics, or manages the production of the well.

Types of well intervention

Pumping

Pumping is the simplest form of intervention as it does not involve putting hardware into the well itself. Frequently it simply involves rigging up to the kill wing valve on the

Christmas tree A Christmas tree is a decorated tree, usually an evergreen pinophyta, conifer, such as a spruce, pine or fir, associated with the celebration of Christmas. It may also consist of an artificial tree of similar appearance. The custom was deve ...

and pumping in a fluid determined necessary for the particular well.

Wellhead and Christmas tree maintenance

The complexity of

wellhead A wellhead is the component at the surface of an oil or gas well that provides the structural and pressure-containing interface for the drilling and production equipment. The primary purpose of a wellhead is to provide the suspension point and ...

and Christmas tree maintenance can vary depending on the condition of the wellheads. Scheduled annual maintenance may simply involve greasing and pressure testing the valve on the hardware. Sometimes the downhole safety valve is pressure tested as well.

Slickline

Slickline operations may be used for fishing, gauge cutting, setting or removing plugs, deploying or removing wireline retrievable valves and memory logging.

Braided line

Braided line is more complex than slickline due to the need for a grease injection system in the rigup to ensure the

blowout preventer A blowout preventer (BOP) (pronounced B-O-P) is a specialized valve or similar mechanical device, used to seal, control and monitor oil well, oil and gas wells to prevent Blowout (well drilling), blowouts, the uncontrolled release of crude oil ...

(BOP) can seal around the braided contours of the wire. It also requires an additional shear-seal BOP as a tertiary barrier, as the upper master valve on the

can only cut slickline. Braided line includes both the core-less variety used for heaving fishing and electric-line used for

well logging Well logging, also known as borehole logging is the practice of making a detailed record (a ''well log'') of the geologic formations penetrated by a borehole. The log may be based either on visual inspection of samples brought to the surface ( ...

and

perforating A perforation is a small hole in a thin material or web. There is usually more than one perforation in an organized fashion, where all of the holes collectively are called a ''perforation''. The process of creating perforations is called perfor ...

Coiled tubing

Coiled tubing is used when it is desired to pump chemicals directly to the bottom of the well, such as in a circulating operation or a chemical wash. It can also be used for tasks normally done by wireline if the deviation in the well is too severe for gravity to lower the toolstring and circumstances prevent the use of a wireline tractor.

Snubbing

Snubbing, also known as hydraulic workover, involves forcing a string of pipe into the well against wellbore pressure to perform the required tasks. The rigup is larger than for

coiled tubing In the oil and gas industry, coiled tubing refers to a long metal pipe, normally in diameter which is supplied spooled on a large reel. It is used for Well intervention, interventions in oil well, oil and gas wells and sometimes as production ...

and the pipe more rigid.

Workover

In some older wells, changing reservoir conditions or deteriorating condition of the completion may necessitate pulling it out to replace it with a fresh completion.

Subsea well intervention

Subsea well intervention offers many challenges and requires much planning. The cost of subsea intervention has in the past inhibited the intervention but in the current economic climate it is much more viable. These interventions are commonly executed from light/medium intervention vessels, or mobile offshore drilling units (MODU) for the heavier interventions such as snubbing and workover

drilling rig A drilling rig is an integrated system that Drilling, drills wells, such as oil or water wells, or holes for piling and other construction purposes, into the earth's subsurface. Drilling rigs can be massive structures housing equipment used to ...

s. Light interventions are generally performed with the well live, and usually involve adjustments of things such as valves; while heavy interventions are generally performed with the well shut down, and may be used to replace parts such as tubing strings or pumps, or to plug and abandon the well.

References

{{Reflist *

ISO 13628-7 The International Organization for Standardization (ISO ; ; ) is an independent, non-governmental, international standard development organization composed of representatives from the national standards organizations of member countries. Mem ...

External links

Defining Well Intervention IWCF Well Intervention Pressure Control syllabus (pdf)ICoTA The Intervention and Coiled Tubing Association
World wide, not for profit, member funded organisation. ICoTA’s aim is to support, communicate and promote rapid technological advances within the well intervention industry. In its mission, ICoTA enhances communication, gathers technical expertise, and promotes safety, training, competency, and industry-accepted practices.
Best well intervention award

Commercial links

Freemyer Industrial Pressure
Petroleum production Oil wells