
Noether's theorem or Noether's first theorem states that every
differentiable symmetry
Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definit ...
of the
action of a physical system with
conservative forces has a corresponding
conservation law
In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
. The theorem was proven by mathematician
Emmy Noether in 1915 and published in 1918. The action of a physical system is the
integral over time of a
Lagrangian
Lagrangian may refer to:
Mathematics
* Lagrangian function, used to solve constrained minimization problems in optimization theory; see Lagrange multiplier
** Lagrangian relaxation, the method of approximating a difficult constrained problem with ...
function, from which the system's behavior can be determined by the
principle of least action. This theorem only applies to continuous and smooth symmetries over
physical space.
Noether's theorem is used in
theoretical physics and the
calculus of variations
The calculus of variations (or Variational Calculus) is a field of mathematical analysis that uses variations, which are small changes in functions
and functionals, to find maxima and minima of functionals: mappings from a set of functions t ...
. It reveals the fundamental relation between the symmetries of a physical system and the conservation laws. It also made modern theoretical physicists much more focused on symmetries of physical systems. A generalization of the formulations on
constants of motion In mechanics, a constant of motion is a quantity that is conserved throughout the motion, imposing in effect a constraint on the motion. However, it is a ''mathematical'' constraint, the natural consequence of the equations of motion, rather than ...
in Lagrangian and
Hamiltonian mechanics (developed in 1788 and 1833, respectively), it does not apply to systems that cannot be modeled with a Lagrangian alone (e.g., systems with a
Rayleigh dissipation function). In particular,
dissipative systems with
continuous symmetries need not have a corresponding conservation law.
Basic illustrations and background
As an illustration, if a physical system behaves the same regardless of how it is oriented in space, its
Lagrangian
Lagrangian may refer to:
Mathematics
* Lagrangian function, used to solve constrained minimization problems in optimization theory; see Lagrange multiplier
** Lagrangian relaxation, the method of approximating a difficult constrained problem with ...
is symmetric under continuous rotations: from this symmetry, Noether's theorem dictates that the
angular momentum of the system be conserved, as a consequence of its laws of motion.
The physical system itself need not be symmetric; a jagged asteroid tumbling in space conserves angular momentum despite its asymmetry. It is the laws of its motion that are symmetric.
As another example, if a physical process exhibits the same outcomes regardless of place or time, then its Lagrangian is symmetric under continuous translations in space and time respectively: by Noether's theorem, these symmetries account for the
conservation law
In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
s of
linear momentum and
energy within this system, respectively.
Noether's theorem is important, both because of the insight it gives into conservation laws, and also as a practical calculational tool. It allows investigators to determine the conserved quantities (invariants) from the observed symmetries of a physical system. Conversely, it allows researchers to consider whole classes of hypothetical Lagrangians with given invariants, to describe a physical system.
As an illustration, suppose that a physical theory is proposed which conserves a quantity ''X''. A researcher can calculate the types of Lagrangians that conserve ''X'' through a continuous symmetry. Due to Noether's theorem, the properties of these Lagrangians provide further criteria to understand the implications and judge the fitness of the new theory.
There are numerous versions of Noether's theorem, with varying degrees of generality. There are natural quantum counterparts of this theorem, expressed in the
Ward–Takahashi identities. Generalizations of Noether's theorem to
superspaces also exist.
Informal statement of the theorem
All fine technical points aside, Noether's theorem can be stated informally:
A more sophisticated version of the theorem involving fields states that:
The word "symmetry" in the above statement refers more precisely to the
covariance of the form that a physical law takes with respect to a one-dimensional
Lie group
In mathematics, a Lie group (pronounced ) is a group that is also a differentiable manifold. A manifold is a space that locally resembles Euclidean space, whereas groups define the abstract concept of a binary operation along with the additio ...
of transformations satisfying certain technical criteria. The
conservation law
In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
of a
physical quantity
A physical quantity is a physical property of a material or system that can be quantified by measurement. A physical quantity can be expressed as a ''value'', which is the algebraic multiplication of a ' Numerical value ' and a ' Unit '. For examp ...
is usually expressed as a
continuity equation
A continuity equation or transport equation is an equation that describes the transport of some quantity. It is particularly simple and powerful when applied to a conserved quantity, but it can be generalized to apply to any extensive quantity. S ...
.
The formal proof of the theorem utilizes the condition of invariance to derive an expression for a current associated with a conserved physical quantity. In modern (since c. 1980) terminology, the conserved quantity is called the ''Noether charge'', while the flow carrying that charge is called the ''Noether current''. The Noether current is defined
up to Two Mathematical object, mathematical objects ''a'' and ''b'' are called equal up to an equivalence relation ''R''
* if ''a'' and ''b'' are related by ''R'', that is,
* if ''aRb'' holds, that is,
* if the equivalence classes of ''a'' and ''b'' wi ...
a
solenoidal (divergenceless) vector field.
In the context of gravitation,
Felix Klein's statement of Noether's theorem for action ''I'' stipulates for the invariants:
Brief illustration and overview of the concept

The main idea behind Noether's theorem is most easily illustrated by a system with one coordinate
and a continuous symmetry
(gray arrows on the diagram). Consider any trajectory
(bold on the diagram) that satisfies the system's
laws of motion. That is, the
action governing this system is
stationary
In addition to its common meaning, stationary may have the following specialized scientific meanings:
Mathematics
* Stationary point
* Stationary process
* Stationary state
Meteorology
* A stationary front is a weather front that is not moving ...
on this trajectory, i.e. does not change under any local
variation
Variation or Variations may refer to:
Science and mathematics
* Variation (astronomy), any perturbation of the mean motion or orbit of a planet or satellite, particularly of the moon
* Genetic variation, the difference in DNA among individual ...
of the trajectory. In particular it would not change under a variation that applies the symmetry flow
on a time segment and is motionless outside that segment. To keep the trajectory continuous, we use "buffering" periods of small time
to transition between the segments gradually.
The total change in the action
now comprises changes brought by every interval in play. Parts, where variation itself vanishes, bring no
. The middle part does not change the action either, because its transformation
is a symmetry and thus preserves the Lagrangian
and the action
. The only remaining parts are the "buffering" pieces. Roughly speaking, they contribute mostly through their "slanting"
.
That changes the Lagrangian by
, which integrates to
These last terms, evaluated around the endpoints
and
, should cancel each other in order to make the total change in the action
be zero, as would be expected if the trajectory is a solution. That is
meaning the quantity
is conserved, which is the conclusion of Noether's theorem. For instance if pure translations of
by a constant are the symmetry, then the conserved quantity becomes just
, the canonical momentum.
More general cases follow the same idea:
Historical context
A
conservation law
In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
states that some quantity ''X'' in the mathematical description of a system's evolution remains constant throughout its motion – it is an
invariant
Invariant and invariance may refer to:
Computer science
* Invariant (computer science), an expression whose value doesn't change during program execution
** Loop invariant, a property of a program loop that is true before (and after) each iteratio ...
. Mathematically, the rate of change of ''X'' (its
derivative with respect to
time) is zero,
:
Such quantities are said to be conserved; they are often called
constants of motion In mechanics, a constant of motion is a quantity that is conserved throughout the motion, imposing in effect a constraint on the motion. However, it is a ''mathematical'' constraint, the natural consequence of the equations of motion, rather than ...
(although motion ''per se'' need not be involved, just evolution in time). For example, if the energy of a system is conserved, its energy is invariant at all times, which imposes a constraint on the system's motion and may help in solving for it. Aside from insights that such constants of motion give into the nature of a system, they are a useful calculational tool; for example, an approximate solution can be corrected by finding the nearest state that satisfies the suitable conservation laws.
The earliest constants of motion discovered were
momentum
In Newtonian mechanics, momentum (more specifically linear momentum or translational momentum) is the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. If is an object's mass an ...
and
kinetic energy, which were proposed in the 17th century by
René Descartes and
Gottfried Leibniz on the basis of
collision experiments, and refined by subsequent researchers.
Isaac Newton was the first to enunciate the conservation of momentum in its modern form, and showed that it was a consequence of
Newton's third law. According to
general relativity, the conservation laws of linear momentum, energy and angular momentum are only exactly true globally when expressed in terms of the sum of the
stress–energy tensor
The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the stress ...
(non-gravitational stress–energy) and the
Landau–Lifshitz stress–energy–momentum pseudotensor (gravitational stress–energy). The local conservation of non-gravitational linear momentum and energy in a free-falling reference frame is expressed by the vanishing of the covariant
divergence of the
stress–energy tensor
The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the stress ...
. Another important conserved quantity, discovered in studies of the
celestial mechanics of astronomical bodies, is the
Laplace–Runge–Lenz vector.
In the late 18th and early 19th centuries, physicists developed more systematic methods for discovering invariants. A major advance came in 1788 with the development of
Lagrangian mechanics, which is related to the
principle of least action. In this approach, the state of the system can be described by any type of
generalized coordinates q; the laws of motion need not be expressed in a
Cartesian coordinate system
A Cartesian coordinate system (, ) in a plane is a coordinate system that specifies each point uniquely by a pair of numerical coordinates, which are the signed distances to the point from two fixed perpendicular oriented lines, measured in t ...
, as was customary in Newtonian mechanics. The
action is defined as the time integral ''I'' of a function known as the
Lagrangian
Lagrangian may refer to:
Mathematics
* Lagrangian function, used to solve constrained minimization problems in optimization theory; see Lagrange multiplier
** Lagrangian relaxation, the method of approximating a difficult constrained problem with ...
''L''
:
where the dot over q signifies the rate of change of the coordinates q,
:
Hamilton's principle states that the physical path q(''t'')—the one actually taken by the system—is a path for which infinitesimal variations in that path cause no change in ''I'', at least up to first order. This principle results in the
Euler–Lagrange equations,
:
Thus, if one of the coordinates, say ''q
k'', does not appear in the Lagrangian, the right-hand side of the equation is zero, and the left-hand side requires that
:
where the momentum
:
is conserved throughout the motion (on the physical path).
Thus, the absence of the ignorable coordinate ''q
k'' from the Lagrangian implies that the Lagrangian is unaffected by changes or transformations of ''q
k''; the Lagrangian is invariant, and is said to exhibit a
symmetry
Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definit ...
under such transformations. This is the seed idea generalized in Noether's theorem.
Several alternative methods for finding conserved quantities were developed in the 19th century, especially by
William Rowan Hamilton. For example, he developed a theory of
canonical transformations which allowed changing coordinates so that some coordinates disappeared from the Lagrangian, as above, resulting in conserved canonical momenta. Another approach, and perhaps the most efficient for finding conserved quantities, is the
Hamilton–Jacobi equation.
Mathematical expression
Simple form using perturbations
The essence of Noether's theorem is generalizing the notion of ignorable coordinates.
One can assume that the Lagrangian ''L'' defined above is invariant under small perturbations (warpings) of the time variable ''t'' and the
generalized coordinates q. One may write
:
where the perturbations ''δt'' and ''δ''q are both small, but variable. For generality, assume there are (say) ''N'' such
symmetry transformations
In physics, a symmetry of a physical system is a physical or mathematical feature of the system (observed or intrinsic) that is preserved or remains unchanged under some transformation.
A family of particular transformations may be ''continuou ...
of the action, i.e. transformations leaving the action unchanged; labelled by an index ''r'' = 1, 2, 3, ..., ''N''.
Then the resultant perturbation can be written as a linear sum of the individual types of perturbations,
:
where ''ε''
''r'' are
infinitesimal
In mathematics, an infinitesimal number is a quantity that is closer to zero than any standard real number, but that is not zero. The word ''infinitesimal'' comes from a 17th-century Modern Latin coinage ''infinitesimus'', which originally referr ...
parameter coefficients corresponding to each:
*
generator
Generator may refer to:
* Signal generator, electronic devices that generate repeating or non-repeating electronic signals
* Electric generator, a device that converts mechanical energy to electrical energy.
* Generator (circuit theory), an eleme ...
''T
r'' of
time evolution, and
*
generator
Generator may refer to:
* Signal generator, electronic devices that generate repeating or non-repeating electronic signals
* Electric generator, a device that converts mechanical energy to electrical energy.
* Generator (circuit theory), an eleme ...
Q
''r'' of the generalized coordinates.
For translations, Q
''r'' is a constant with units of
length
Length is a measure of distance. In the International System of Quantities, length is a quantity with dimension distance. In most systems of measurement a base unit for length is chosen, from which all other units are derived. In the Interna ...
; for rotations, it is an expression linear in the components of q, and the parameters make up an
angle.
Using these definitions,
Noether Noether is the family name of several mathematicians (particularly, the Noether family), and the name given to some of their mathematical contributions:
* Max Noether (1844–1921), father of Emmy and Fritz Noether, and discoverer of:
** Noether ...
showed that the ''N'' quantities
:
are conserved (
constants of motion In mechanics, a constant of motion is a quantity that is conserved throughout the motion, imposing in effect a constraint on the motion. However, it is a ''mathematical'' constraint, the natural consequence of the equations of motion, rather than ...
).
Examples
I. Time invariance
For illustration, consider a Lagrangian that does not depend on time, i.e., that is invariant (symmetric) under changes ''t'' → ''t'' + δ''t'', without any change in the coordinates q. In this case, ''N'' = 1, ''T'' = 1 and Q = 0; the corresponding conserved quantity is the total
energy ''H''
:
II. Translational invariance
Consider a Lagrangian which does not depend on an ("ignorable", as above) coordinate ''q''
''k''; so it is invariant (symmetric) under changes ''q''
''k'' → ''q''
''k'' + ''δq''
''k''. In that case, ''N'' = 1, ''T'' = 0, and ''Q''
''k'' = 1; the conserved quantity is the corresponding linear
momentum
In Newtonian mechanics, momentum (more specifically linear momentum or translational momentum) is the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. If is an object's mass an ...
''p''
''k''
:
In
special and
general relativity, these two conservation laws can be expressed either ''globally'' (as it is done above), or ''locally'' as a continuity equation. The global versions can be united into a single global conservation law: the conservation of the energy-momentum 4-vector. The local versions of energy and momentum conservation (at any point in space-time) can also be united, into the conservation of a quantity defined ''locally'' at the space-time point: the
stress–energy tensor
The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the stress ...
(this will be derived in the next section).
III. Rotational invariance
The conservation of the
angular momentum L = r × p is analogous to its linear momentum counterpart.
It is assumed that the symmetry of the Lagrangian is rotational, i.e., that the Lagrangian does not depend on the absolute orientation of the physical system in space. For concreteness, assume that the Lagrangian does not change under small rotations of an angle ''δθ'' about an axis n; such a rotation transforms the
Cartesian coordinates
A Cartesian coordinate system (, ) in a plane is a coordinate system that specifies each point uniquely by a pair of numerical coordinates, which are the signed distances to the point from two fixed perpendicular oriented lines, measured in t ...
by the equation
:
Since time is not being transformed, ''T'' = 0, and ''N'' = 1. Taking ''δθ'' as the ''ε'' parameter and the Cartesian coordinates r as the generalized coordinates q, the corresponding Q variables are given by
:
Then Noether's theorem states that the following quantity is conserved,
:
In other words, the component of the angular momentum L along the n axis is conserved. And if n is arbitrary, i.e., if the system is insensitive to any rotation, then every component of L is conserved; in short,
angular momentum is conserved.
Field theory version
Although useful in its own right, the version of Noether's theorem just given is a special case of the general version derived in 1915. To give the flavor of the general theorem, a version of Noether's theorem for continuous fields in four-dimensional
space–time
In physics, spacetime is a mathematical model that combines the three dimensions of space and one dimension of time into a single four-dimensional manifold. Spacetime diagrams can be used to visualize relativistic effects, such as why differen ...
is now given. Since field theory problems are more common in modern physics than
mechanics problems, this field theory version is the most commonly used (or most often implemented) version of Noether's theorem.
Let there be a set of differentiable
fields defined over all space and time; for example, the temperature
would be representative of such a field, being a number defined at every place and time. The
principle of least action can be applied to such fields, but the action is now an integral over space and time
:
(the theorem can be further generalized to the case where the Lagrangian depends on up to the ''n''
th derivative, and can also be formulated using
jet bundles).
A continuous transformation of the fields
can be written infinitesimally as
:
where
is in general a function that may depend on both
and
. The condition for
to generate a physical symmetry is that the action
is left invariant. This will certainly be true if the Lagrangian density
is left invariant, but it will also be true if the Lagrangian changes by a divergence,
:
since the integral of a divergence becomes a boundary term according to the
divergence theorem
In vector calculus, the divergence theorem, also known as Gauss's theorem or Ostrogradsky's theorem, reprinted in is a theorem which relates the ''flux'' of a vector field through a closed surface to the ''divergence'' of the field in the vol ...
. A system described by a given action might have multiple independent symmetries of this type, indexed by
so the most general symmetry transformation would be written as
:
with the consequence
:
For such systems, Noether's theorem states that there are
conserved
current densities
:
(where the dot product is understood to contract the ''field'' indices, not the
index or
index).
In such cases, the
conservation law
In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
is expressed in a four-dimensional way
:
which expresses the idea that the amount of a conserved quantity within a sphere cannot change unless some of it flows out of the sphere. For example,
electric charge is conserved; the amount of charge within a sphere cannot change unless some of the charge leaves the sphere.
For illustration, consider a physical system of fields that behaves the same under translations in time and space, as considered above; in other words,
is constant in its third argument. In that case, ''N'' = 4, one for each dimension of space and time. An infinitesimal translation in space,
(with
denoting the
Kronecker delta), affects the fields as
: that is, relabelling the coordinates is equivalent to leaving the coordinates in place while translating the field itself, which in turn is equivalent to transforming the field by replacing its value at each point
with the value at the point
"behind" it which would be mapped onto
by the infinitesimal displacement under consideration. Since this is infinitesimal, we may write this transformation as
:
The Lagrangian density transforms in the same way,
, so
:
and thus Noether's theorem corresponds to the conservation law for the
stress–energy tensor
The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the stress ...
''T''
''μ''''ν'',
where we have used
in place of
. To wit, by using the expression given earlier, and collecting the four conserved currents (one for each
) into a tensor
, Noether's theorem gives
:
with
:
(we relabelled
as
at an intermediate step to avoid conflict). (However, the
obtained in this way may differ from the symmetric tensor used as the source term in general relativity; see
Canonical stress–energy tensor.)
The conservation of
electric charge, by contrast, can be derived by considering ''Ψ'' linear in the fields ''φ'' rather than in the derivatives.
In
quantum mechanics, the
probability amplitude ''ψ''(x) of finding a particle at a point x is a complex field ''φ'', because it ascribes a
complex number to every point in space and time. The probability amplitude itself is physically unmeasurable; only the probability ''p'' = , ''ψ'',
2 can be inferred from a set of measurements. Therefore, the system is invariant under transformations of the ''ψ'' field and its
complex conjugate field ''ψ''
* that leave , ''ψ'',
2 unchanged, such as
:
a complex rotation. In the limit when the phase ''θ'' becomes infinitesimally small, ''δθ'', it may be taken as the parameter ''ε'', while the ''Ψ'' are equal to ''iψ'' and −''iψ''*, respectively. A specific example is the
Klein–Gordon equation, the
relativistically correct version of the
Schrödinger equation for
spinless particles, which has the Lagrangian density
:
In this case, Noether's theorem states that the conserved (∂ ⋅ ''j'' = 0) current equals
:
which, when multiplied by the charge on that species of particle, equals the electric current density due to that type of particle. This "gauge invariance" was first noted by
Hermann Weyl
Hermann Klaus Hugo Weyl, (; 9 November 1885 – 8 December 1955) was a German mathematician, theoretical physicist and philosopher. Although much of his working life was spent in Zürich, Switzerland, and then Princeton, New Jersey, he is assoc ...
, and is one of the prototype
gauge symmetries of physics.
Derivations
One independent variable
Consider the simplest case, a system with one independent variable, time. Suppose the dependent variables q are such that the action integral
is invariant under brief infinitesimal variations in the dependent variables. In other words, they satisfy the
Euler–Lagrange equations
:
And suppose that the integral is invariant under a continuous symmetry. Mathematically such a symmetry is represented as a flow (mathematics), flow, φ, which acts on the variables as follows
:
where ''ε'' is a real variable indicating the amount of flow, and ''T'' is a real constant (which could be zero) indicating how much the flow shifts time.
:
The action integral flows to
:
which may be regarded as a function of ''ε''. Calculating the derivative at ''ε = 0 and using
Leibniz's rule (derivatives and integrals), Leibniz's rule, we get
:
Notice that the Euler–Lagrange equations imply
:
Substituting this into the previous equation, one gets
:
Again using the Euler–Lagrange equations we get
:
Substituting this into the previous equation, one gets
:
From which one can see that
:
is a constant of the motion, i.e., it is a conserved quantity. Since φ
''q, 0= q, we get
and so the conserved quantity simplifies to
:
To avoid excessive complication of the formulas, this derivation assumed that the flow does not change as time passes. The same result can be obtained in the more general case.
Field-theoretic derivation
Noether's theorem may also be derived for tensor fields ''φ''
''A'' where the index ''A'' ranges over the various components of the various tensor fields. These field quantities are functions defined over a four-dimensional space whose points are labeled by coordinates ''x''
μ where the index ''μ'' ranges over time (''μ'' = 0) and three spatial dimensions (''μ'' = 1, 2, 3). These four coordinates are the independent variables; and the values of the fields at each event are the dependent variables. Under an infinitesimal transformation, the variation in the coordinates is written
:
whereas the transformation of the field variables is expressed as
:
By this definition, the field variations ''δφ''
''A'' result from two factors: intrinsic changes in the field themselves and changes in coordinates, since the transformed field ''α''
''A'' depends on the transformed coordinates ξ
μ. To isolate the intrinsic changes, the field variation at a single point ''x''
μ may be defined
:
If the coordinates are changed, the boundary of the region of space–time over which the Lagrangian is being integrated also changes; the original boundary and its transformed version are denoted as Ω and Ω’, respectively.
Noether's theorem begins with the assumption that a specific transformation of the coordinates and field variables does not change the
action, which is defined as the integral of the Lagrangian density over the given region of spacetime. Expressed mathematically, this assumption may be written as
:
where the comma subscript indicates a partial derivative with respect to the coordinate(s) that follows the comma, e.g.
:
Since ξ is a dummy variable of integration, and since the change in the boundary Ω is infinitesimal by assumption, the two integrals may be combined using the four-dimensional version of the
divergence theorem
In vector calculus, the divergence theorem, also known as Gauss's theorem or Ostrogradsky's theorem, reprinted in is a theorem which relates the ''flux'' of a vector field through a closed surface to the ''divergence'' of the field in the vol ...
into the following form
:
The difference in Lagrangians can be written to first-order in the infinitesimal variations as
:
However, because the variations are defined at the same point as described above, the variation and the derivative can be done in reverse order; they
commute
:
Using the Euler–Lagrange field equations
:
the difference in Lagrangians can be written neatly as
:
Thus, the change in the action can be written as
:
Since this holds for any region Ω, the integrand must be zero
:
For any combination of the various
symmetry
Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definit ...
transformations, the perturbation can be written
:
where
is the
Lie derivative of φ
''A'' in the ''X''
''μ'' direction. When ''φ''
''A'' is a scalar or
,
:
These equations imply that the field variation taken at one point equals
:
Differentiating the above divergence with respect to ''ε'' at ''ε'' = 0 and changing the sign yields the conservation law
:
where the conserved current equals
:
Manifold/fiber bundle derivation
Suppose we have an ''n''-dimensional oriented
Riemannian manifold
In differential geometry, a Riemannian manifold or Riemannian space , so called after the German mathematician Bernhard Riemann, is a real manifold, real, smooth manifold ''M'' equipped with a positive-definite Inner product space, inner product ...
, ''M'' and a target manifold ''T''. Let
be the
configuration space of
smooth function
In mathematical analysis, the smoothness of a function (mathematics), function is a property measured by the number of Continuous function, continuous Derivative (mathematics), derivatives it has over some domain, called ''differentiability cl ...
s from ''M'' to ''T''. (More generally, we can have smooth sections of a
fiber bundle
In mathematics, and particularly topology, a fiber bundle (or, in Commonwealth English: fibre bundle) is a space that is a product space, but may have a different topological structure. Specifically, the similarity between a space E and a p ...
over ''M''.)
Examples of this ''M'' in physics include:
* In
classical mechanics, in the
Hamiltonian formulation, ''M'' is the one-dimensional manifold
, representing time and the target space is the
cotangent bundle
In mathematics, especially differential geometry, the cotangent bundle of a smooth manifold is the vector bundle of all the cotangent spaces at every point in the manifold. It may be described also as the dual bundle to the tangent bundle. This may ...
of
space of generalized positions.
* In
field theory, ''M'' is the
spacetime manifold and the target space is the set of values the fields can take at any given point. For example, if there are ''m''
real-valued
scalar field
In mathematics and physics, a scalar field is a function (mathematics), function associating a single number to every point (geometry), point in a space (mathematics), space – possibly physical space. The scalar may either be a pure Scalar ( ...
s,
, then the target manifold is
. If the field is a real vector field, then the target manifold is
isomorphic
In mathematics, an isomorphism is a structure-preserving mapping between two structures of the same type that can be reversed by an inverse mapping. Two mathematical structures are isomorphic if an isomorphism exists between them. The word is ...
to
.
Now suppose there is a
functional
Functional may refer to:
* Movements in architecture:
** Functionalism (architecture)
** Form follows function
* Functional group, combination of atoms within molecules
* Medical conditions without currently visible organic basis:
** Functional sy ...
:
called the
action. (It takes values into
, rather than
; this is for physical reasons, and is unimportant for this proof.)
To get to the usual version of Noether's theorem, we need additional restrictions on the
action. We assume