Irwin 41
   HOME

TheInfoList



OR:

The Irwin 41 is an American
sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...
that was designed by Ted Irwin as a
cruiser A cruiser is a type of warship. Modern cruisers are generally the largest ships in a fleet after aircraft carriers and amphibious assault ships, and can usually perform several operational roles from search-and-destroy to ocean escort to sea ...
and first built in 1982.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 364-365. Houghton Mifflin Company, 1994. The Irwin 41 is sometimes confused with the Irwin 41 Citation, a racing sailboat design also introduced in 1982.


Production

The design was built by Irwin Yachts in the
United States The United States of America (USA), also known as the United States (U.S.) or America, is a country primarily located in North America. It is a federal republic of 50 U.S. state, states and a federal capital district, Washington, D.C. The 48 ...
starting in 1982, but it is now out of production.


Design

The Irwin 41 is a recreational
keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...
, built predominantly of
fiberglass Fiberglass (American English) or fibreglass (English in the Commonwealth of Nations, Commonwealth English) is a common type of fibre-reinforced plastic, fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened i ...
, with
teak Teak (''Tectona grandis'') is a tropical hardwood tree species in the family Lamiaceae. It is a large, deciduous tree that occurs in mixed hardwood forests. ''Tectona grandis'' has small, fragrant white flowers arranged in dense clusters (panic ...
wood trim. It has a masthead
ketch A ketch is a two- masted sailboat whose mainmast is taller than the mizzen mast (or aft-mast), and whose mizzen mast is stepped forward of the rudder post. The mizzen mast stepped forward of the rudder post is what distinguishes the ketch f ...
rig and may be optionally
cutter rig A cutter is any of various types of watercraft. The term can refer to the rig (sail plan) of a sailing vessel (but with regional differences in definition), to a governmental enforcement agency vessel (such as a coast guard or border force cutt ...
ged. All spars are coated
aluminum Aluminium (or aluminum in North American English) is a chemical element; it has chemical symbol, symbol Al and atomic number 13. It has a density lower than that of other common metals, about one-third that of steel. Aluminium has ...
. It features a center cockpit, a
raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...
, a near-vertical transom, a
skeg A skeg (or skegg or skag) is a sternward extension of the keel of boats and ships which have a rudder mounted on the centre line. The term also applies to the lowest point on an outboard motor or the outdrive of an inboard/outboard."A small fin f ...
-mounted
rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...
controlled by a
wheel A wheel is a rotating component (typically circular in shape) that is intended to turn on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machin ...
and a fixed fin
keel The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...
, deep keel or keel and
centerboard A centreboard or centerboard (US) is a retractable hull appendage which pivots out of a slot in the hull of a sailboat, known as a ''centreboard trunk'' (UK) or ''centerboard case'' (US). The retractability allows the centreboard to be raised t ...
. It displaces and carries of ballast. There are optional
dinghy A dinghy is a type of small boat, often carried or Towing, towed by a Watercraft, larger vessel for use as a Ship's tender, tender. Utility dinghies are usually rowboats or have an outboard motor. Some are rigged for sailing but they diffe ...
davit Boat suspended from Welin Quadrant davits; the boat is mechanically 'swung out' Gravity multi-pivot on Scandinavia'' file:Bossoir a gravité.jpg, Gravity Roller Davit file:Davits-starbrd.png, Gravity multi-pivot davit holding rescue vessel on ...
s at the stern. The boat has a draft of with the standard keel and with the optional deep draft keel. The centerboard model has a draft of with the centerboard extended and with it retracted, allowing operation in shallow water. The boat is fitted with a British
Perkins Engines Perkins Engines Company Limited is primarily a diesel engine manufacturer for several markets including agricultural, construction, material handling, power generation, and Industrial sector, industrial. It was established in Peterborough, Eng ...
4-154
diesel engine The diesel engine, named after the German engineer Rudolf Diesel, is an internal combustion engine in which Combustion, ignition of diesel fuel is caused by the elevated temperature of the air in the cylinder due to Mechanics, mechanical Compr ...
of for docking and maneuvering. The fuel tank holds and the fresh water tank has a capacity of . The design has sleeping accommodation for seven people, with a double "V"-berth in the bow cabin, an L-shaped settee, with a drop-down table and a straight settee in the main cabin and an aft cabin with a double berth. The
galley A galley is a type of ship optimised for propulsion by oars. Galleys were historically used for naval warfare, warfare, Maritime transport, trade, and piracy mostly in the seas surrounding Europe. It developed in the Mediterranean world during ...
is located on the starboard side just aft of the
companionway In the architecture of a ship, a companion or companionway is a raised and windowed hatchway in the ship's deck, with a ladder leading below and the hooded entrance-hatch to the main cabins. A companionway may be secured by doors or, commonly i ...
ladder from the centre cockpit. The galley has a tiled sole and is equipped with a three-burner
propane Propane () is a three-carbon chain alkane with the molecular formula . It is a gas at standard temperature and pressure, but becomes liquid when compressed for transportation and storage. A by-product of natural gas processing and petroleum ref ...
stove, an oven and a double sink. A navigation station is opposite the galley, on the port side. There are two heads, both equipped with showers, one just aft of the bow cabin on the port side and one on the starboard side in the aft cabin. The passageway to the aft cabin may include an optional entertainment center with a bar, stereo and television. Ventilation is provided by seven opening cabin hatches. The cockpit
coaming Coaming is any vertical surface on a ship designed to deflect or prevent entry of water. It usually consists of a raised section of deck plating around an opening, such as a cargo hatch. Coamings also provide a frame onto which to fit a hatch cov ...
, hand rails and toerails are all made from teak. There is an aluminum
bowsprit The bowsprit of a sailing vessel is a spar (sailing), spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay that counteracts the forces from the forestay, forestays. The bowsprit’s purpose is to create ...
and
stainless steel Stainless steel, also known as inox, corrosion-resistant steel (CRES), or rustless steel, is an iron-based alloy that contains chromium, making it resistant to rust and corrosion. Stainless steel's resistance to corrosion comes from its chromi ...
pulpits at the bow and stern. For sailing the design is equipped with winches for the
mainsail A mainsail is a sail rigged on the main mast (sailing), mast of a sailing vessel. * On a square rigged vessel, it is the lowest and largest sail on the main mast. * On a fore-and-aft rigged vessel, it is the sail rigged aft of the main mast. T ...
,
jib A jib is a triangular sail that sets ahead of the foremast of a sailing vessel. Its forward corner (tack) is fixed to the bowsprit, to the bows, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main ty ...
and mizzen
halyard In sailing, a halyard or halliard is a line (rope) that is used to hoist a ladder, sail, flag or yard. The term "halyard" derives from the Middle English ''halier'' ("rope to haul with"), with the last syllable altered by association with the E ...
s,
genoa Genoa ( ; ; ) is a city in and the capital of the Italian region of Liguria, and the sixth-largest city in Italy. As of 2025, 563,947 people live within the city's administrative limits. While its metropolitan city has 818,651 inhabitan ...
and mizzen sheets. The 4:1
mechanical advantage Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. The device trades off input forces against movement to obtain a desired amplification in the output force. The model for ...
mainsheet In sailing, a sheet is a line (rope, cable or chain) used to control the movable corner(s) (clews) of a sail. Terminology In nautical usage the term "sheet" is applied to a line or chain attached to the lower corners of a sail for the purpose ...
is led to a winch on the aft cockpit coaming. Both the main and mizzen booms are equipped with internally-mounted
outhaul An outhaul is a control line found on a sailboat. It is an element of the running rigging, used to attach the mainsail clew to the boom and tensions the foot of the sail. It commonly uses a block at the boom end and a cleat on the boom, closer ...
s. The mainsail has slab
reefing Reefing reduces the area of a sail, usually by folding or rolling one edge of the canvas in on itself and attaching the unused portion to a Spar (sailing), spar or a , as the primary measure to preserve a sailing vessel's stability in strong wi ...
.


Operational history

The boat is supported by an active class club, the ''Irwin Yacht Owners''. In a 1994 review Richard Sherwood wrote, "The Irwin 41 was designed as a blue-water cruiser. The hull is moderate displacement, the keel is long, and the ballast/displacement ratio is 32 percent. Optional hulls are a centerboard/keel and a deep keel. The sail plan is balanced and designed to be handled by two people."


See also

*
List of sailing boat types The following is a partial list of sailboat types and sailing classes, including keelboats, dinghy, dinghies, and multihull (catamarans and trimarans). Olympic classes World Sailing Classes Historically known as the IYRU (International Yacht ...
Similar sailboats * Dickerson 41 * Irwin 41 Citation * Lord Nelson 41 * Morgan Out Island 41 * Newport 41 * Nimbus 42


References

{{Irwin Yachts Keelboats 1980s sailboat type designs Sailing yachts Sailboat type designs by Ted Irwin Sailboat types built by Irwin Yachts