An electronic component is any basic discrete device or physical entity in an electronic system used to affect electrons or their associated fields. Electronic components are mostly

industrial product Industrial production is a measure of output of the industrial sector of the economy. The industrial sector includes manufacturing, mining, and utilities. Although these sectors contribute only a small portion of gross domestic product (GDP), they ...

s, available in a singular form and are not to be confused with electrical elements, which are conceptual abstractions representing idealized electronic components and elements. Electronic components have a number of

electrical terminal Components of an electrical circuit are electrically connected if an electric current can run between them through an electrical conductor. An electrical connector is an electromechanical device used to create an electrical connection betwee ...

s or leads. These leads connect to other electrical components, often over wire, to create an

electronic circuit An electronic circuit is composed of individual electronic components, such as resistors, transistors, capacitors, inductors and diodes, connected by conductive wires or traces through which electric current can flow. It is a type of electrical ...

with a particular function (for example an amplifier,

radio receiver In radio communications, a radio receiver, also known as a receiver, a wireless, or simply a radio, is an electronic device that receives radio waves and converts the information carried by them to a usable form. It is used with an antenna. Th ...

, or

oscillator Oscillation is the repetitive or periodic variation, typically in time, of some measure about a central value (often a point of equilibrium) or between two or more different states. Familiar examples of oscillation include a swinging pendulum ...

). Basic electronic components may be packaged discretely, as arrays or networks of like components, or integrated inside of packages such as semiconductor

integrated circuit An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small flat piece (or "chip") of semiconductor material, usually silicon. Large numbers of tiny ...

s, hybrid integrated circuits, or

thick film Thick-film technology is used to produce electronic devices/modules such as surface mount devices modules, hybrid integrated circuits, heating elements, integrated passive devices and sensors. Main manufacturing technique is screen printing (stencil ...

devices. The following list of electronic components focuses on the discrete version of these components, treating such packages as components in their own right.

Classification

Components can be classified as passive, active, or

electromechanic In engineering, electromechanics combines processes and procedures drawn from electrical engineering and mechanical engineering. Electromechanics focuses on the interaction of electrical and mechanical systems as a whole and how the two systems ...

. The strict physics definition treats passive components as ones that cannot supply energy themselves, whereas a

battery Battery most often refers to: * Electric battery, a device that provides electrical power * Battery (crime), a crime involving unlawful physical contact Battery may also refer to: Energy source *Automotive battery, a device to provide power t ...

would be seen as an active component since it truly acts as a source of energy. However,

electronic engineer Electronics engineering is a sub-discipline of electrical engineering which emerged in the early 20th century and is distinguished by the additional use of active components such as semiconductor devices to amplify and control electric current ...

s who perform circuit analysis use a more restrictive definition of passivity. When only concerned with the energy of signals, it is convenient to ignore the so-called DC circuit and pretend that the power supplying components such as transistors or

s is absent (as if each such component had its own battery built in), though it may in reality be supplied by the DC circuit. Then, the analysis only concerns the AC circuit, an abstraction that ignores DC voltages and currents (and the power associated with them) present in the real-life circuit. This fiction, for instance, lets us view an oscillator as "producing energy" even though in reality the oscillator consumes even more energy from a DC power supply, which we have chosen to ignore. Under that restriction, we define the terms as used in circuit analysis as: * Active components rely on a source of energy (usually from the DC circuit, which we have chosen to ignore) and usually can inject power into a circuit, though this is not part of the definition. Active components include amplifying components such as transistors, triode vacuum tubes (valves), and

tunnel diode A tunnel diode or Esaki diode is a type of semiconductor diode that has effectively "negative resistance" due to the quantum mechanical effect called tunneling. It was invented in August 1957 by Leo Esaki, Yuriko Kurose, and Takashi Suzuki ...

s. * Passive components cannot introduce net energy into the circuit. They also cannot rely on a source of power, except for what is available from the (AC) circuit they are connected to. As a consequence, they cannot amplify (increase the power of a signal), although they may increase a voltage or current (such as is done by a transformer or resonant circuit). Passive components include two-terminal components such as resistors, capacitors, inductors, and transformers. * Electromechanical components can carry out electrical operations by using moving parts or by using electrical connections Most passive components with more than two terminals can be described in terms of two-port parameters that satisfy the principle of

reciprocity Reciprocity may refer to: Law and trade * Reciprocity (Canadian politics), free trade with the United States of America ** Reciprocal trade agreement, entered into in order to reduce (or eliminate) tariffs, quotas and other trade restrictions on ...

—though there are rare exceptions. In contrast, active components (with more than two terminals) generally lack that property.

Active components

Semiconductors

Transistors

Transistors were considered the invention of the twentieth century that changed electronic circuits forever. A transistor is a semiconductor device used to amplify and switch electronic signals and electrical power. * Field-effect transistors (FET) **

MOSFET The metal–oxide–semiconductor field-effect transistor (MOSFET, MOS-FET, or MOS FET) is a type of field-effect transistor (FET), most commonly fabricated by the controlled oxidation of silicon. It has an insulated gate, the voltage of which d ...

(metal-oxide-semiconductor FET) – by far the most widely manufactured electronic component (also known as MOS transistor) *** PMOS ( p-type MOS) *** NMOS ( n-type MOS) ***

CMOS Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", ) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFE ...

(complementary MOS) ***

Power MOSFET A power MOSFET is a specific type of metal–oxide–semiconductor field-effect transistor (MOSFET) designed to handle significant power levels. Compared to the other power semiconductor devices, such as an insulated-gate bipolar transistor (IG ...

****

LDMOS LDMOS (laterally-diffused metal-oxide semiconductor) is a planar double-diffused MOSFET (metal–oxide–semiconductor field-effect transistor) used in amplifiers, including microwave power amplifiers, RF power amplifiers and audio power amplifie ...

(lateral diffused MOSFET) *** MuGFET (multi-gate field-effect transistor) **** FinFET (fin field-effect transistor) ***TFT ( thin-film transistor) **

FeFET A ferroelectric field-effect transistor (Fe FET) is a type of field-effect transistor that includes a ferroelectric material sandwiched between the gate electrode and source-drain conduction region of the device (the channel). Permanent electric ...

(ferroelectric field-effect transistor) **

CNTFET A carbon nanotube field-effect transistor (CNTFET) is a field-effect transistor that utilizes a single carbon nanotube or an array of carbon nanotubes as the channel material instead of bulk silicon in the traditional MOSFET structure. First demons ...

(carbon nanotube field-effect transistor) **

JFET The junction-gate field-effect transistor (JFET) is one of the simplest types of field-effect transistor. JFETs are three-terminal semiconductor devices that can be used as electronically controlled switches or resistors, or to build amplifiers. ...

(junction field-effect transistor) – N-channel or P-channel ***SIT (

static induction transistor The static induction transistor (SIT) is a type of field-effect transistor (FET) capable of high-speed and high-power operation, with low distortion and low noise. It is a vertical structure device with short multichannel. The device was original ...

) ** MESFET (metal semiconductor FET) **HEMT ( high-electron-mobility transistor) *Composite transistors ** BiCMOS (bipolar CMOS) **IGBT ( Insulated-gate bipolar transistor) *Other transistors ** Bipolar junction transistor (BJT, or simply "transistor") – NPN or PNP ***

Photo transistor A photodiode is a light-sensitive semiconductor diode. It produces current when it absorbs photons. The package of a photodiode allows light (or infrared or ultraviolet radiation, or X-rays) to reach the sensitive part of the device. The packa ...

– amplified photodetector ** Darlington transistor – NPN or PNP ***Photo Darlington – amplified photodetector **

Sziklai pair In electronics, the Sziklai pair, also known as a complementary feedback pair, is a configuration of two bipolar transistors, similar to a Darlington pair. In contrast to the Darlington arrangement, the Sziklai pair has one NPN and one PNP transi ...

(compound transistor, complementary Darlington) * Thyristors ** Silicon-controlled rectifier (SCR) – passes current only after triggered by a sufficient control voltage on its gate ** TRIAC (TRIode for Alternating Current) – bidirectional SCR **

Unijunction transistor A unijunction transistor (UJT) is a three-lead electronic semiconductor device with only one junction that acts exclusively as an electrically controlled switch. The UJT is not used as a linear amplifier. It is used in free-running oscillators, sy ...

(UJT) **Programmable

(PUT) **SITh ( static induction thyristor)

Diodes

Conduct electricity easily in one direction, among more specific behaviors. *

Diode A diode is a two-terminal electronic component that conducts current primarily in one direction (asymmetric conductance); it has low (ideally zero) resistance in one direction, and high (ideally infinite) resistance in the other. A diode ...

rectifier A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction. The reverse operation (converting DC to AC) is performed by an Power ...

, diode bridge * Schottky diode (hot carrier diode) – super fast diode with lower forward voltage drop * Zener diode – allows current to flow "backwards" when a specific set voltage is reached. * Transient voltage suppression diode (TVS), unipolar or bipolar – used to absorb high-voltage spikes * Varicap, tuning diode, varactor, variable capacitance diode – a diode whose AC capacitance varies according to the DC voltage applied. Verschiedene LEDs

* Laser diode * Light-emitting diode (LED) – a diode that emits light *

Photodiode A photodiode is a light-sensitive semiconductor diode. It produces current when it absorbs photons. The package of a photodiode allows light (or infrared or ultraviolet radiation, or X-rays) to reach the sensitive part of the device. The packag ...

– passes current in proportion to incident light ** Avalanche photodiode – photodiode with internal gain ** Solar Cell, photovoltaic cell, PV array or panel – produces power from light * DIAC (diode for alternating current), Trigger Diode, SIDAC) – often used to trigger an SCR *

Constant-current diode A constant-current diode is an electronic device that limits current to a maximal specified value for the device. It is known as a current-limiting diode (CLD) or current-regulating diode (CRD). It consists of an n-channel JFET with the gate sho ...

Step recovery diode In electronics, a step recovery diode (SRD, snap-off diode or charge-storage diode or memory varactor) is a semiconductor junction diode with the ability to generate extremely short pulses. It has a variety of uses in microwave (MHz to GHz range ...

Tunnel diode A tunnel diode or Esaki diode is a type of semiconductor diode that has effectively "negative resistance" due to the quantum mechanical effect called tunneling. It was invented in August 1957 by Leo Esaki, Yuriko Kurose, and Takashi Suzuki ...

- very fast diode based on quantum mechanical tunneling

Integrated circuits

Integrated Circuits can serve a variety of purposes, including acting as a timer, performing digital to analog conversion, performing amplification, or being used for logical operations. *

Integrated circuit An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small flat piece (or "chip") of semiconductor material, usually silicon. Large numbers of tiny ...

(IC) ** MOS integrated circuit (MOS IC) ** Hybrid integrated circuit (hybrid IC) ** Mixed-signal integrated circuit ** Three-dimensional integrated circuit (3D IC) * Digital electronics **

Logic gate A logic gate is an idealized or physical device implementing a Boolean function, a logical operation performed on one or more binary inputs that produces a single binary output. Depending on the context, the term may refer to an ideal logic gate, ...

Microcontroller A microcontroller (MCU for ''microcontroller unit'', often also MC, UC, or μC) is a small computer on a single VLSI integrated circuit (IC) chip. A microcontroller contains one or more CPUs (processor cores) along with memory and programmable i ...

* Analog circuit ** Hall-effect sensor – senses a magnetic field **

Current sensor In electrical engineering, current sensing is any one of several techniques used to measure electric current. The measurement of current ranges from picoamps to tens of thousands of amperes. The selection of a current sensing method depends on ...

– senses a current through it

Programmable devices

Programmable logic device A programmable logic device (PLD) is an electronic component used to build reconfigurable digital circuits. Unlike digital logic constructed using discrete logic gates with fixed functions, a PLD has an undefined function at the time of manuf ...

Field-programmable gate array A field-programmable gate array (FPGA) is an integrated circuit designed to be configured by a customer or a designer after manufacturinghence the term '' field-programmable''. The FPGA configuration is generally specified using a hardware d ...

(FPGA) ** Complex programmable logic device (CPLD) *

Field-programmable analog array A field-programmable analog array (FPAA) is an integrated circuit device containing computational analog blocks (CAB) and interconnects between these blocks offering field-programmability. Unlike their digital cousin, the FPGA, the devices tend to ...

(FPAA)

Optoelectronic devices

Opto-electronics Optoelectronics (or optronics) is the study and application of electronics, electronic devices and systems that find, detect and control light, usually considered a sub-field of photonics. In this context, ''light'' often includes invisible form ...

** Opto-isolator, opto-coupler, photo-coupler – photodiode, BJT, JFET, SCR, TRIAC, zero-crossing TRIAC, open collector IC, CMOS IC,

solid state relay Solid state contactor PCB mount solid-state DIL relay A solid state relay (SSR) is an electronic switching device that switches on or off when an external voltage (AC or DC) is applied across its control terminals. They serve the same function ...

(SSR) ** Slotted optical switch, opto switch, optical switch ** LED display – seven-segment display, sixteen-segment display, dot-matrix display

Display technologies

Current: *

Filament lamp An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light with a wire filament heated until it glows. The filament is enclosed in a glass bulb with a vacuum or inert gas to protect the filament from oxidat ...

(indicator lamp) * Vacuum fluorescent display (VFD) (preformed characters, 7 segment, starburst) *

Cathode ray tube A cathode-ray tube (CRT) is a vacuum tube containing one or more electron guns, which emit electron beams that are manipulated to display images on a phosphorescent screen. The images may represent electrical waveforms ( oscilloscope), pictu ...

(CRT) ( dot matrix scan, radial scan (e.g. radar), arbitrary scan (e.g.

oscilloscope An oscilloscope (informally a scope) is a type of electronic test instrument that graphically displays varying electrical voltages as a two-dimensional plot of one or more signals as a function of time. The main purposes are to display repetiti ...

)) ( monochrome & colour) *

LCD A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directly but in ...

(preformed characters, dot matrix) (passive, TFT) (monochrome, colour) *

Neon Neon is a chemical element with the symbol Ne and atomic number 10. It is a noble gas. Neon is a colorless, odorless, inert monatomic gas under standard conditions, with about two-thirds the density of air. It was discovered (along with krypton ...

(individual, 7 segment display) *

LED A light-emitting diode (LED) is a semiconductor Electronics, device that Light#Light sources, emits light when Electric current, current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy i ...

(individual, 7 segment display, starburst display, dot matrix) * Split-flap display (numeric, preprinted messages) * Plasma display (dot matrix) * OLED (similar to an LCD, but each pixel generates its own light, can be made flexible or transparent) *

Micro-LED microLED, also known as micro-LED, mLED or µLED, first invented in 2000 by the research group of Hongxing Jiang and Jingyu Lin of Texas Tech University while they were at Kansas State University, is an emerging flat-panel display technology. mi ...

(similar to OLED, but uses inorganic

s instead of organic ones, does not suffer from screen burn-in, however it cannot be made flexible or transparent) Obsolete: * Incandescent filament 7 segment display (aka '

Numitron A seven-segment display is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, basic ...

') * Nixie tube * Dekatron (aka glow transfer tube) * Magic eye tube indicator * Penetron (a 2 colour see-through CRT)

Vacuum tubes (valves)

A vacuum tube is based on current conduction through a vacuum (see Vacuum tube). *

tube * Amplification ** Triode ** Tetrode **

Pentode A pentode is an electronic device having five electrodes. The term most commonly applies to a three-grid amplifying vacuum tube or thermionic valve that was invented by Gilles Holst and Bernhard D.H. Tellegen in 1926. The pentode (called a ''tripl ...

** Hexode ** Pentagrid (Heptode) **

Octode The pentagrid converter is a type of radio receiving valve (vacuum tube) with five grids used as the frequency mixer stage of a superheterodyne radio receiver. The pentagrid was part of a line of development of valves that were able to take an ...

** Traveling-wave tube ** Klystron * Oscillation ** Magnetron ** Reflex Klystron (obsolete) ** Carcinotron Optical detectors or emitters * Phototube or photodiode – tube equivalent of semiconductor

photodiode A photodiode is a light-sensitive semiconductor diode. It produces current when it absorbs photons. The package of a photodiode allows light (or infrared or ultraviolet radiation, or X-rays) to reach the sensitive part of the device. The packag ...

* Photomultiplier tube – phototube with internal gain *

(CRT) or television picture tube (obsolete) * Vacuum fluorescent display (VFD) – modern non-raster sort of small CRT display * Magic eye tube – small CRT display used as a tuning meter (obsolete) * X-ray tube – generates x-rays

Discharge devices

Gas discharge tube A gas-filled tube, also commonly known as a discharge tube or formerly as a Plücker tube, is an arrangement of electrodes in a gas within an insulating, temperature-resistant envelope. Gas-filled tubes exploit phenomena related to electric d ...

* Ignitron * Thyratron Obsolete: * Mercury arc rectifier * Voltage regulator tube * Nixie tube

Power sources

Sources of electrical power: *

Battery Battery most often refers to: * Electric battery, a device that provides electrical power * Battery (crime), a crime involving unlawful physical contact Battery may also refer to: Energy source *Automotive battery, a device to provide power t ...

– acid- or alkali-based power supply. *

Fuel cell A fuel cell is an electrochemical cell that converts the chemical energy of a fuel (often hydrogen) and an oxidizing agent (often oxygen) into electricity through a pair of redox reactions. Fuel cells are different from most batteries in requ ...

– an electrochemical generator * Power supply – usually a main hook-up *

Photovoltaic Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially us ...

device – generates electricity from light * Thermoelectric generator – generates electricity from temperature gradients * Electrical generator – an electromechanical power source * Piezoelectric generator - generates electricity from mechanical strain * Van de Graaff generator - generates electricity from friction

Passive components

Components incapable of controlling current by means of another electrical signal are called ''passive'' devices. Resistors, capacitors, inductors, and transformers are all considered passive devices.

Resistors

Pass current in proportion to voltage (

Ohm's law Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. Introducing the constant of proportionality, the resistance, one arrives at the usual mathematical equat ...

) and oppose current. *

Resistor A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active el ...

– fixed value ** Power

resistor A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active el ...

– larger to safely dissipate heat generated ** SIP or DIP resistor network – array of resistors in one package * Variable resistor ** Rheostat – two-terminal variable resistor (often for high power) ** Potentiometer – three-terminal variable resistor (variable voltage divider) ** Trim pot – small potentiometer, usually for internal adjustments ** Thermistor – thermally sensitive resistor whose prime function is to exhibit a large, predictable and precise change in electrical resistance when subjected to a corresponding change in body temperature.What is a Thermistor
U.S. Sensor Corp. **

Humistor A humistor is a type of variable resistor whose resistance varies based on humidity Humidity is the concentration of water vapor present in the air. Water vapor, the gaseous state of water, is generally invisible to the human eye. Humidit ...

– humidity-varied resistor ** Photoresistor ** Memristor ** Varistor, Voltage-dependent resistor, MOV – Passes current when excessive voltage is present * Resistance wire,

Nichrome Nichrome (also known as NiCr, nickel-chromium or chromium-nickel) is a family of alloys of nickel, chromium, and often iron (and possibly other elements) commonly used as resistance wire, heating elements in devices like toasters, electrical kettl ...

wire – wire of high-resistance material, often used as a heating element * Heater – heating element

Capacitors

Capacitors store and release electrical charge. They are used for filtering power supply lines, tuning resonant circuits, and for blocking DC voltages while passing AC signals, among numerous other uses. * Capacitor ** Integrated capacitors *** MIS capacitor ***

Trench capacitor A trench is a type of excavation or in the ground that is generally deeper than it is wide (as opposed to a wider gully, or ditch), and narrow compared with its length (as opposed to a simple hole or pit). In geology, trenches result from eros ...

** Fixed capacitors ***

Ceramic capacitor A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material de ...

*** Film capacitor ***

Electrolytic capacitor An electrolytic capacitor is a polarized capacitor whose anode or positive plate is made of a metal that forms an insulating oxide layer through anodization. This oxide layer acts as the dielectric of the capacitor. A solid, liquid, or gel el ...

**** Aluminum electrolytic capacitor **** Tantalum electrolytic capacitor ****

Niobium electrolytic capacitor A niobium electrolytic capacitor (historically also ''Columbium capacitor'') is an electrolytic capacitor whose anode (+) is made of passivated niobium metal or niobium monoxide, on which an insulating niobium pentoxide layer acts as a dielectric ...

(

Columbium capacitor A niobium electrolytic capacitor (historically also ''Columbium capacitor'') is an electrolytic capacitor whose anode (+) is made of passivated niobium metal or niobium monoxide, on which an insulating niobium pentoxide layer acts as a dielect ...

) ****

Polymer capacitor A polymer capacitor, or more accurately a polymer electrolytic capacitor, is an electrolytic capacitor (e-cap) with a solid conductive polymer electrolyte. There are four different types: * Polymer tantalum capacitor, tantalum electrolytic capac ...

, OS-CON ***

Supercapacitor A supercapacitor (SC), also called an ultracapacitor, is a high-capacity capacitor, with a capacitance value much higher than other capacitors but with lower voltage limits. It bridges the gap between electrolytic capacitors and rechargeable ba ...

(Electric double-layer capacitor) ****

Nanoionic supercapacitor Nanoionics is the study and application of phenomena, properties, effects, methods and mechanisms of processes connected with fast ion transport (FIT) in all-solid-state nanoscale systems. The topics of interest include fundamental properties of ...

**** Lithium-ion capacitor *** Mica capacitor ***

Vacuum capacitor A vacuum variable capacitor is a variable capacitor which uses a high vacuum as the dielectric instead of air or other insulating material. This allows for a higher voltage rating than an air dielectric using a smaller total volume. However, many ...

Variable capacitor A variable capacitor is a capacitor whose capacitance may be intentionally and repeatedly changed mechanically or electronically. Variable capacitors are often used in L/C circuits to set the resonance frequency, e.g. to tune a radio (therefo ...

– adjustable capacitance *** Tuning capacitor – variable capacitor for tuning a radio, oscillator, or tuned circuit ***

Trimmer capacitor A trimmer, or preset, is a miniature adjustable electrical component. It is meant to be set correctly when installed in some device, and never seen or adjusted by the device's user. Trimmers can be variable resistors (potentiometers), variable c ...

– small variable capacitor for seldom or rare adjustments of LC-circuits *** Vacuum variable capacitor ** Capacitors for special applications *** Power capacitor *** Safety capacitor *** Filter capacitor *** Light-emitting capacitor (LEC) ***

Motor capacitor A motor capacitor, such as a start capacitor or run capacitor (including a dual run capacitor) is an electrical capacitor that alters the current to one or more windings of a single-phase alternating-current induction motor to create a rotating m ...

*** Photoflash capacitor ***

Reservoir capacitor A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction. The reverse operation (converting DC to AC) is performed by an inver ...

/ Bulk capacitor ***

Coupling capacitor Capacitive coupling is the transfer of energy within an electrical network or between distant networks by means of displacement current between circuit(s) nodes, induced by the electric field. This coupling can have an intentional or accidental ...

***

Decoupling capacitor A decoupling capacitor is a capacitor used to decouple one part of an electrical network (circuit) from another. Noise caused by other circuit elements is shunted through the capacitor, reducing its effect on the rest of the circuit. For hig ...

/ Buffer capacitor *** Bypass capacitor *** Pull capacitor / Padding capacitor *** Backup capacitor ***

Switched capacitor A switched capacitor (SC) is an electronic circuit that implements a function by moving charges into and out of capacitors when electronic switches are opened and closed. Usually, non-overlapping clock signals are used to control the switches, so ...

***

Feedthrough capacitor A feedthrough is a Conductor (material), conductor used to carry a signal through an enclosure or printed circuit board. Like any conductor, it has a small amount of capacitance. A "feedthrough capacitor" has a guaranteed minimum value of bui ...

** Capacitor network (array) *

Varicap In electronics, a varicap diode, varactor diode, variable capacitance diode, variable reactance diode or tuning diode is a type of diode designed to exploit the voltage-dependent capacitance of a reverse-biased p–n junction. Applications Vara ...

diode – AC capacitance varies according to the DC voltage applied

Integrated passive devices

Integrated passive devices are passive devices integrated within one distinct package. They take up less space than equivalent combinations of discrete components.

Magnetic (inductive) devices

Electrical components that use magnetism in the storage and release of electrical charge through current: * Inductor, coil, choke * Variable inductor * Saturable inductor * Transformer *

Magnetic amplifier The magnetic amplifier (colloquially known as a "mag amp") is an electromagnetic device for amplifying electrical signals. The magnetic amplifier was invented early in the 20th century, and was used as an alternative to vacuum tube amplifiers wh ...

( toroid) * ferrite impedances, beads * Motor /

Generator Generator may refer to: * Signal generator, electronic devices that generate repeating or non-repeating electronic signals * Electric generator, a device that converts mechanical energy to electrical energy. * Generator (circuit theory), an eleme ...

Solenoid upright=1.20, An illustration of a solenoid upright=1.20, Magnetic field created by a seven-loop solenoid (cross-sectional view) described using field lines A solenoid () is a type of electromagnet formed by a helix, helical coil of wire whose ...

* Loudspeaker and microphone

Memristor

Electrical components that pass charge in proportion to magnetism or magnetic flux, and have the ability to retain a previous resistive state, hence the name of Memory plus Resistor. * Memristor

Networks

Components that use more than one type of passive component: * RC network – forms an

RC circuit A resistor–capacitor circuit (RC circuit), or RC filter or RC network, is an electric circuit composed of resistors and capacitors. It may be driven by a voltage or current source and these will produce different responses. A first order RC ci ...

, used in snubbers * LC Network – forms an

LC circuit An LC circuit, also called a resonant circuit, tank circuit, or tuned circuit, is an electric circuit consisting of an inductor, represented by the letter L, and a capacitor, represented by the letter C, connected together. The circuit can ac ...

, used in tunable transformers and RFI filters.

Transducers, sensors, detectors

# Transducers generate physical effects when driven by an electrical signal, or vice versa. #

Sensor A sensor is a device that produces an output signal for the purpose of sensing a physical phenomenon. In the broadest definition, a sensor is a device, module, machine, or subsystem that detects events or changes in its environment and sends ...

s (detectors) are transducers that react to environmental conditions by changing their electrical properties or generating an electrical signal. # The transducers listed here are single electronic components (as opposed to complete assemblies), and are passive (see Semiconductors and Tubes for active ones). Only the most common ones are listed here. * Audio ** Loudspeaker – Electromagnetic or piezoelectric device to generate full audio **

Buzzer A buzzer or beeper is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric (''piezo'' for short). Typical uses of buzzers and beepers include alarm devices, timers, train and confirmation of user input such as a ...

– Electromagnetic or piezoelectric sounder to generate tones * Position, motion **

Linear variable differential transformer The linear variable differential transformer (LVDT) (also called linear variable displacement transformer, linear variable displacement transducer, or simply differential transformer) is a type of electrical transformer used for measuring linear d ...

(LVDT) – Magnetic – detects linear position ** Rotary encoder, Shaft Encoder – Optical, magnetic, resistive or switches – detects absolute or relative angle or rotational speed **

Inclinometer An inclinometer or clinometer is an measuring instrument, instrument used for measuring angles of slope, elevation, or depression (geology), depression of an object with respect to gravity's direction. It is also known as a ''tilt indicator'', ' ...

– Capacitive – detects angle with respect to gravity ** Motion sensor, Vibration sensor **

Flow meter Flow measurement is the quantification of bulk fluid movement. Flow can be measured in a variety of ways. The common types of flowmeters with industrial applications are listed below: * a) Obstruction type (differential pressure or variable area) ...

– detects flow in liquid or gas * Force, torque **

Strain gauge A strain gauge (also spelled strain gage) is a device used to measure strain on an object. Invented by Edward E. Simmons and Arthur C. Ruge in 1938, the most common type of strain gauge consists of an insulating flexible backing which supports ...

– Piezoelectric or resistive – detects squeezing, stretching, twisting ** Accelerometer – Piezoelectric – detects acceleration, gravity * Thermal ** Thermocouple, thermopile – Wires that generate a voltage proportional to delta temperature ** Thermistor – Resistor whose resistance changes with temperature, up PTC or down NTC ** Resistance Temperature Detector (RTD) – Wire whose resistance changes with temperature ** Bolometer – Device for measuring the power of incident electromagnetic radiation **

Thermal cutoff A thermal cutoff is an electrical safety device (either a thermal fuse or thermal switch) that interrupts electric current when heated to a specific temperature. These devices may be for one-time use (a thermal fuse), or may be reset manually or ...

– Switch that is opened or closed when a set temperature is exceeded * Magnetic field (see also Hall Effect in semiconductors) **

Magnetometer A magnetometer is a device that measures magnetic field or magnetic dipole moment. Different types of magnetometers measure the direction, strength, or relative change of a magnetic field at a particular location. A compass is one such device, o ...

, Gauss meter * Humidity ** Hygrometer * Electromagnetic, light ** Photo resistor – Light dependent resistor (LDR)

Antennas

Antenna Antenna ( antennas or antennae) may refer to: Science and engineering * Antenna (radio), also known as an aerial, a transducer designed to transmit or receive electromagnetic (e.g., TV or radio) waves * Antennae Galaxies, the name of two collid ...

s transmit or receive radio waves * Elemental dipole * Yagi *

Phased array In antenna theory, a phased array usually means an electronically scanned array, a computer-controlled array of antennas which creates a beam of radio waves that can be electronically steered to point in different directions without moving th ...

Loop antenna A loop antenna is a radio antenna consisting of a loop or coil of wire, tubing, or other electrical conductor, that is usually fed by a balanced source or feeding a balanced load. Within this physical description there are two (possibly three) di ...

* Parabolic dish * Log-periodic dipole array * Biconical * Feedhorn

Assemblies, modules

Multiple electronic components assembled in a device that is in itself used as a component *

Oscillator Oscillation is the repetitive or periodic variation, typically in time, of some measure about a central value (often a point of equilibrium) or between two or more different states. Familiar examples of oscillation include a swinging pendulum ...

* Display devices **

Liquid crystal display A liquid-crystal display (LCD) is a flat panel display, flat-panel display or other Electro-optic modulator, electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liqui ...

(LCD) ** Digital voltmeters * Filter

Prototyping aids

* Wire-wrap *

Breadboard A breadboard, solderless breadboard, or protoboard is a construction base used to build semi-permanent prototypes of electronic circuits. Unlike a perfboard or stripboard, breadboards do not require soldering or destruction of tracks and are ...

Electromechanical

Piezoelectric devices, crystals, resonators

Passive components Passivity is a property of engineering systems, most commonly encountered in analog electronics and control systems. Typically, analog designers use ''passivity'' to refer to incrementally passive components and systems, which are incapable of p ...

that use piezoelectric effect: * Components that use the effect to generate or filter high frequencies ** Crystal – a ceramic crystal used to generate precise frequencies (See the Modules class below for complete oscillators) **

Ceramic resonator A Ceramic Resonator is an electronic component consisting of a piece of a piezoelectric ceramic material with two or more metal electrodes attached. When connected in an electronic oscillator circuit, resonant mechanical vibrations in the device ge ...

– Is a ceramic crystal used to generate semi-precise frequencies ** Ceramic filter – Is a ceramic crystal used to filter a band of frequencies such as in

s ** surface acoustic wave (SAW) filters * Components that use the effect as mechanical transducers. ** Ultrasonic motor – Electric motor that uses the piezoelectric effects ** For piezo buzzers and microphones, see the Transducer class below

Microelectromechanical systems

Microelectromechanical systems Microelectromechanical systems (MEMS), also written as micro-electro-mechanical systems (or microelectronic and microelectromechanical systems) and the related micromechatronics and microsystems constitute the technology of microscopic devices, ...

** Accelerometer ** Digital micromirror device

Terminals and connectors

Devices to make electrical connection *

Terminal Terminal may refer to: Computing Hardware * Terminal (electronics), a device for joining electrical circuits together * Terminal (telecommunication), a device communicating over a line * Computer terminal, a set of primary input and output devic ...

Connector Connector may refer to: Hardware *Plumbing * Electrical connector, a device for joining electrical circuits together (sometimes known as ports, plugs, or interfaces) ** Gender of connectors and fasteners ** AC power plugs and sockets, devices tha ...

** Socket ** Screw terminal, Terminal Blocks ** Pin header

Cable assemblies

Electrical cables Electrical wiring is an electrical installation of cabling and associated devices such as switches, distribution boards, sockets, and light fittings in a structure. Wiring is subject to safety standards for design and installation. Allowable ...

with connectors or terminals at their ends * Power cord * Patch cord * Test lead Micro switch

Switches

Components that can pass current ("closed") or break the current ("open"): * Switch – Manually operated switch ** Electrical description: SPST, SPDT, DPST, DPDT, NPNT (general) ** Technology: slide switches, toggle switches, rocker switches, rotary switches, pushbutton switches * Keypad – Array of pushbutton switches * DIP switch – Small array of switches for internal configuration settings * Footswitch – Foot-operated switch *

Knife switch A knife switch is a type of switch used to control the flow of electricity in a circuit. It is composed of a hinge which allows a metal lever, or knife, to be lifted from or inserted into a slot or jaw. The hinge and jaw are both fixed to an ...

– Switch with unenclosed conductors * Micro switch – Mechanically activated switch with snap action * Limit switch – Mechanically activated switch to sense limit of motion * Mercury switch – Switch sensing tilt * Centrifugal switch – Switch sensing centrifugal force due to rate of rotation * Relay or contactor – Electro-mechanically operated switch (see also

above) *

Reed switch Reed or Reeds may refer to: Science, technology, biology, and medicine * Reed bird (disambiguation) * Reed pen, writing implement in use since ancient times * Reed (plant), one of several tall, grass-like wetland plants of the order Poales * Re ...

– Magnetically activated switch *

Thermostat A thermostat is a regulating device component which senses the temperature of a physical system and performs actions so that the system's temperature is maintained near a desired setpoint. Thermostats are used in any device or system tha ...

– Thermally activated switch *

Humidistat A humidistat or hygrostat is an electronic device analogous to a thermostat but which responds to relative humidity, not temperature. A typical humidistat is usually included with portable humidifiers or dehumidifiers. It can also be included wi ...

– Humidity activated switch * Circuit breaker – Switch opened in response to excessive current: a resettable fuse * Disconnector – Switch used in high- and medium-voltage applications for maintenance of other devices or isolation of circuits *

Transfer switch A transfer switch is an electrical switch that switches a load between two sources. Some transfer switches are manual, in that an operator effects the transfer by throwing a switch, while others are automatic and trigger when they sense one of t ...

– Switch that toggles a load between two sources

Protection devices

that protect circuits from excessive currents or voltages: *

Fuse Fuse or FUSE may refer to: Devices * Fuse (electrical), a device used in electrical systems to protect against excessive current ** Fuse (automotive), a class of fuses for vehicles * Fuse (hydraulic), a device used in hydraulic systems to protect ...

– over-current protection, one time use * Circuit breaker – resettable fuse in the form of a mechanical switch * Resettable fuse or PolySwitch – circuit breaker action using solid state device *

Ground-fault protection A residual-current device (RCD), residual-current circuit breaker (RCCB) or ground fault circuit interrupter (GFCI) is an electrical safety device that quickly breaks an electrical circuit with leakage current to ground. It is to protect equi ...

or residual-current device – circuit breaker sensitive to mains currents passing to ground * Metal oxide varistor (MOV), surge absorber, TVS – Over-voltage protection *

Inrush current limiter An inrush current limiter is a component used to limit inrush current to avoid gradual damage to components and avoid blowing fuses or tripping circuit breakers. Negative temperature coefficient (NTC) thermistors and fixed resistors are often us ...

– protection against initial Inrush current *

– protection against high voltage surges * Spark gap – electrodes with a gap to arc over at a high voltage *

Lightning arrester A lightning arrester (alternative spelling lightning arrestor) (also called lightning isolator) is a device, essentially an air gap between an electric wire and ground, used on electric power transmission and telecommunication systems to protect ...

– spark gap used to protect against lightning strikes *

Recloser In electric power distribution, automatic circuit reclosers (ACRs) are a class of switchgear designed for use on overhead electricity distribution networks to detect and interrupt transient faults. Also known as reclosers or autoreclosers, ACRs a ...

– automatic switch that opens on an overcurrent (fault) condition, then closes to check if the fault is cleared, and repeats this process a specified number of times before maintaining the open position until it is manually closed * Arc-fault circuit interrupter – circuit breaker that protects against arcs * Network protector – protective device that disconnects a distribution transformer when energy flow reverses direction * Magnetic starter – electromechanical switch used in motors

Mechanical accessories

* Enclosure (electrical) * Heat sink * Fan

Other

Printed circuit board A printed circuit board (PCB; also printed wiring board or PWB) is a medium used in Electrical engineering, electrical and electronic engineering to connect electronic components to one another in a controlled manner. It takes the form of a L ...

s *

Lamp Lamp, Lamps or LAMP may refer to: Lighting * Oil lamp, using an oil-based fuel source * Kerosene lamp, using kerosene as a fuel * Electric lamp, or light bulb, a replaceable component that produces light from electricity * Light fixture, or ligh ...

* Waveguide

Obsolete

* Carbon amplifier (see Carbon microphones used as amplifiers) * Carbon arc (negative resistance device) * Dynamo (historic rf generator) *

Coherer The coherer was a primitive form of radio signal detector used in the first radio receivers during the wireless telegraphy era at the beginning of the 20th century. Its use in radio was based on the 1890 findings of French physicist Édouard Bran ...

Standard symbols

On a circuit diagram, electronic devices are represented by conventional symbols.

Reference designator A reference designator unambiguously identifies the location of an component within an electrical schematic or on a printed circuit board. The reference designator usually consists of one or two letters followed by a number, e.g. R13, C1002. The nu ...

s are applied to the symbols to identify the components.

References

{{DEFAULTSORT:Electronic Component

Components Circuit Component may refer to: •Are devices that perform functions when they are connected in a circuit. In engineering, science, and technology Generic systems * System components, an entity with discrete structure, such as an assem ...