Cimoliopterus

''Cimoliopterus'' is a genus of pterosaur that lived during the Late Cretaceous in what is now England and the United States. The first known specimen, consisting of the front part of a snout including part of a crest, was discovered in the Grey Chalk Subgroup of Kent, England, and described as the new species ''Pterodactylus cuvieri'' in 1851. The specific name ''cuvieri'' honours the palaeontologist George Cuvier, whereas the genus ''Pterodactylus'' was then used for many pterosaur species that are not thought to be closely related today. It was one of the first pterosaurs to be depicted as models in Crystal Palace Park in the 1850s. The species was subsequently assigned to various other genera, including ''Ornithocheirus'' and '' Anhanguera''. In 2013, the species was moved to a new genus, as ''Cimoliopterus cuvieri''; the generic name ''Cimoliopterus'' is derived from the Greek words for "chalk" and "wing". Other specimens and species have also been assigned to or synonymised with the species with various levels of certainty. In 2015, a snout discovered in the Britton Formation of Texas, US, was named as a new species in the genus, ''C. dunni''; the specific name honours its collector, Brent Dunn.

''C. cuvieri'' is estimated to have had a wingspan of , and ''C. dunni'' is thought to have been similar to ''C. cuvieri'' in size. ''Cimoliopterus'' can be distinguished from related pterosaurs in features such as having a premaxillary crest that begins hindward on the snout, in having a ridge on the palate that extends forwards until the third pair of tooth sockets, and in the spacing and proportions of the tooth sockets. Unlike similar pterosaurs, the tip of the snout is only subtly expanded to the sides. ''C. cuvieri'' and ''C. dunni'' differ from each other in various details in the configuration of these features; for example, the crest of ''C. cuvieri'' begins by the seventh tooth socket, whereas that of ''C. dunni'' begins at the fourth. More completely known related genera were fairly large pterosaurs, with proportionally large skulls, long jaws and tooth-rows, often with large, rounded crests at the front of the jaws. The teeth at the front of the jaws were large and recurved; further back, the teeth were smaller, slightly recurved, and well-spaced. As pterosaurs, ''Cimoliopterus'' would have been covered in pycnofibres (hair-like filaments), and had extensive wing-membranes, which were distended by long wing-fingers.

While long considered an ornithocheiran, the affinities of ''C. cuvieri'' were unclear due to the fragmentary nature of it and other English pterosaurs, until more complete relatives were reported from Brazil in the 1980s. ''Cimoliopterus'' was moved to the family Cimoliopteridae within the clade Targaryendraconia in 2019, with its closest relative being ''Camposipterus''. That ''C. cuvieri'' and ''C. dunni'', from England and North America respectively, were so similar despite living on opposite sides of the North Atlantic Ocean indicates they became less isolated from each other than other animal groups because they could fly. This kind of pterosaur was probably adapted for long-distance oceanic soaring, which is also supported by their fossils mainly being found in marine settings. While they may have been proficient in water, their terrestrial abilities were limited due to their short hindlimbs but long forelimbs. They possibly fed while flying by dipping their long jaws into water and catching fish with their interlocking teeth. While some have suggested the premaxillary crests were used to stabilise the jaws while submerged in water during feeding, they may have been used as display structures instead.

History

The taxonomic history of ''Cimoliopterus'' and related pterosaurs from the Cretaceous of England has been described as confusing by modern pterosaur researchers, since many of them were described from very fragmentary remains, and named using convoluted nomenclatural schemes of the Victorian era. Prior to these discoveries, many of the hollow, thin-walled pterosaur bones found in England were thought to have belonged to birds. In 1851, the British naturalist James Scott Bowerbank described a large pterosaur snout he had obtained, which was found in the Lower Culand Pit in what is now called the Grey Chalk Subgroup at Burham, Kent, in South East England. Pterosaur fossils had been discovered earlier in the same pit, including the front part of some jaws Bowerbank had used as the basis for the species ''Pterodactylus giganteus'' in 1846, as well as other bones. Based on the new snout, Bowerbank named the species ''Pterodactylus cuvieri''; at this time, the genus ''Pterodactylus'' (originally named in 1815 based on a Bavarian specimen) was used for many pterosaur species now thought to be distantly related to each other. The specific name honours the French palaeontologist Georges Cuvier, who had recognised that pterosaurs were flying reptiles.

The snout which Bowerbank made the holotype specimen (on which the scientific name is based) of ''P. cuvieri'' consists of the front of the upper jaw, including part of a premaxillary crest (a crest on the premaxilla, the frontmost bone of the upper jaw), and is catalogued today as NHMUK PV 39409 at the Natural History Museum in London. It was originally reported to preserve a single tooth in the first right tooth socket (at the front of the snout), but this had disappeared when the holotype was examined in the 2000s. Two complete teeth were also originally reported to be preserved in the same block of chalk as the snout. Bowerbank also believed some large bones in three other collections may either have belonged to the same species, to ''P. giganteus'', or to a third possible species. The British biologist Richard Owen assigned one long bone to ''P. cuvieri'' in 1851 (today catalogued as NHMUK PV 41637) based on its size and the character of its surface, and identified it as a possible phalanx bone of the elongated wing-finger.

In the 1850s the British artist Benjamin Waterhouse Hawkins created full-sized sculptures of prehistoric animals for Crystal Palace Park in London, under the supervision of Owen. Among them were two species of pterosaur, including two ''P. cuvieri'' sculptures made of iron-framed concrete and two smaller statues of '' Pterodactylus bucklandi''. Hawkins' models were the first to depict pterosaurs. Incidentally, he thought these animals to be the original dragons, such as in the legend of Saint George. The larger ''P. cuvieri'' statues are today in disrepair due to their delicate nature and vandalism, and the smaller ones have been lost. The British palaeontologist Mark Witton stated in 2019 that the anatomy of the sculptures was probably based on the (by then) more completely known ''P. antiquus''. They were depicted with scales (though pterosaurs are now known to have had a hair-like covering, a feature already realised by some scientists at the time) and bird-like proportions such as small heads and large torsos, as was customary at the time. One sculpture is correctly shown in a quadrupedal pose, and with one foot flat on the ground.

In 1869, the British palaeontologist Harry Govier Seeley placed ''P. cuvieri'' in the new genus ''Ptenodactylus'' along with other English pterosaurs known mainly from upper jaws, in an index of specimens in the Woodwardian Museum. He noted these names were provisional, only intended for the convenience of students using the museum, and not necessarily as names for these species. In 1870, Seeley placed the species in the genus ''Ornithocheirus'', which he had originally used for other species in his 1869 index, and figured a dentary bone (front bone of the mandible) he listed belonged to ''O. cuvieri''. In 1874, Owen assigned the species to the genus ''Coloborhynchus''. The British palaeontologist Reginald Walter Hooley used the name ''O. cuvieri'' in his 1914 revision of ''Ornithocheirus'', using Seeley's terminology.

In 1922, the Austrian naturalist Gustav von Arthaber lamented that the scientific literature had accepted the many ''Ornithocheirus'' names that had only been mentioned in Seeley's catalogue for students. In his opinion names were of no use without an illustration of the specimens they were based on, or better still, a complete reconstruction of the relevant skeleton. For this reason, he provided a drawing of the skull of ''O. cuvieri'' (among other species), one of the few species for which the known jaw material proved its validity. In 1924, von Arthaber's interpretations were criticised by the Hungarian palaeontologist Franz Nopcsa von Felső-Szilvás, who found some of the skull reconstructions "worthless".

''O. cuvieri'' and many other English pterosaurs were kept in the genus ''Ornithocheirus'' for most of the 20th century. In 1987, the German palaeontologist Peter Wellnhofer described the new crested pterosaur ''Tropeognathus'' from the Santana Formation of Brazil and noted the similarities between it and other newly described Brazilian taxa such as '' Anhanguera'' to English taxa that were based on fragmentary snouts, such as the various species assigned to ''Ornithocheirus''. He concluded that while the appearance of the English taxa had long been a puzzle (leading for example to von Arthaber's unusual reconstructions), the discovery of the related and much better preserved Brazilian species made this clearer, showing that the English species too had premaxillary crests at the end of large, long skulls. When ''Anhanguera'' was described in 1985, it was thought to be the only pterosaur with such a crest known until that point (then referred to as a sagittal crest). In 1991, Wellnhofer stated that the genus ''Ornithocheirus'' had become a "wastebin" of species from different countries, assigned to it on the basis of insufficient characters, and needed clearer definition, and perhaps included several distinct genera.

The British palaeontologist S. Christopher Bennett stated in 1993 that the holotype specimen of ''O. cuvieri'' was the right first wing-phalanx bone mentioned by Owen in 1851, and cited him for the name without further explanation. In 1995, the Russian palaeontologist Natalia N. Bakhurina and the British palaeontologist David M. Unwin assigned a partial mandibular symphysis (the part connecting the two halves of the lower jaw) from Russia to cf. ''Anhanguera cuvieri'' (from Latin "confer", possibly belonging to this or a related animal), thereby using a new combination. Unwin and colleagues assigned pterosaur skeletal elements from the Toolebuc Formation of Australia to ''Anhanguera'' ?''cuvieri'' in 2000. In 2001, Unwin also used the combination ''A. cuvieri'', and cited Bowerbank for the name, with the snout as holotype. He assigned 23 jaw fragment from the Cambridge Greensand Formation to ''A. cuvieri'' and considered it the most common pterosaur of that formation. Unwin concluded that the species ''O. brachyrhinus'', ''O. colorhinus'', ''O. dentatus'', ''O. denticulatus'', ''O. enchorhynchus'', ''O. scaphorhynchus'' and ''O. xyphorhynchus'' were junior synonyms of ''A. cuvieri''. He also considered a species originally named ''Pterodactylus fittoni'' by Owen in 1859 as a member of ''Anhanguera''. In 2011, the Brazilian palaeontologist Alexander W. Kellner and colleagues made the Australian material that had been assigned to ''A.'' ?''cuvieri'' the basis of a new genus, '' Aussiedraco'', and stated that they saw no ground for placing ''O. cuvieri'' in ''Anhanguera''.

New genus and assigned species

In 2013, the Brazilian palaeontologist Taissa Rodrigues and Kellner reviewed the species that had so far been placed in the genus ''Ornithocheirus'' (which they restricted to its type species, ''O. simus''), as well as other English Cretaceous pterosaurs. They concluded that ''A. cuvieri'' differed enough from its relatives to be placed in a new, monotypic genus; ''Cimoliopterus''. This generic name combines the Greek words ''Kimolia'' (Κιμωλία), which means "chalk", and ''pteron,'' (πτερόν) meaning "wing". Rodrigues and Kellner also found that while the species ''P. fittoni'', ''O. brachyrhinus'', and ''O. enchorhynchus'' had various features in common with ''C. cuvieri'', and could therefore not be excluded from that genus, they were too fragmentary to be assigned to it definitely and were considered ''nomina dubia'' (dubious names). They considered other species that were assigned to ''A. cuvieri'' by Unwin in 2001 dubious or belonging to other taxa. They also considered the Russian specimen assigned to cf. ''A. cuvieri'' in 1995 unrelated. In 2019, the Brazilian palaeontologist Rodrigo V. Pêgas and colleagues suggested that the type specimen of ''Lonchodectes'' (a dubious genus originally known as ''Pterodactylus compressirostris'') represented by a partial mandibular symphysis from the Chalk Group, could represent the same species as ''C. cuvieri''. They cautioned this is impossible to confirm until associated skull and mandible material is found.

In 2013, the American amateur fossil collector Brent Dunn discovered a pterosaur snout fragment in the Britton Formation near Lewisville Lake, northwest of Dallas, Texas, US. He donated the specimen to the Shuler Museum of Paleontology of Southern Methodist University, where it is catalogued as SMU 76892. In 2015, the American palaeontologist Timothy S. Myers described the specimen and made it the holotype of the new species ''Cimoliopterus dunni''; the specific name honours Dunn, who died in 2013. The holotype specimen of ''C. dunni'' consists of the front part of a snout, including part of a premaxillary crest. The fossil was initially covered by a thin layer of red clay, which was prepared away. The three-dimensionally preserved fossil does not appear to have suffered the extreme crushing often seen in pterosaur fossils, though some of the hind part was distorted by compaction. ''C. dunni'' was only the third toothed pterosaur known from the Cretaceous of North America.

Description

Because the fossils are incomplete, the size of ''Cimoliopterus'' is difficult to estimate. Extrapolating from the remains of more complete pterosaur species, as well as various bones possibly belonging to ''C. cuvieri'', Bowerbank estimated a wingspan of about in 1851. This was larger than the estimates for the earlier named ''P. giganteus'' (now in the genus ''Lonchodraco''), which he had considered "gigantic" for a pterosaur. Later the same year, Owen called ''C. cuvieri'' "truly gigantic", compared to ''P. giganteus'', which he felt was therefore inaccurately named. In 2001, comparing the ''C. cuvieri'' holotype specimen with the more complete ''Anhanguera'', Unwin estimated a wingspan of about . He estimated an assigned specimen, CAMSM B54.431, to have had a wingspan of up to . In 2013, this specimen—originally a syntype snout tip of '' Ornithocheirus colorhinus''—was tentatively assigned instead to ''Camposipterus'' by Rodrigues and Kellner. In 2015, Myers stated the holotypes of ''C. cuvieri'' and ''C. dunni'' belonged to individuals of a similar size. ''C. dunni'' would have been mid-sized for a pterosaur, with a wingspan of about , according to a press release accompanying its description. In 2019, Pêgas and colleagues refrained from estimating wingspans for such species represented by too fragmentary material.

More completely known related genera were fairly large pterosaurs, with proportionally large skulls, long jaws and tooth-rows, and often with large, rounded crests at the front of the jaws. The teeth at the front of the jaws were large and recurved, and further back the teeth were smaller, slightly recurved, and well-spaced. Much of the skeleton would have been pneumatised (filled with air-sacs that lightened it). The necks were proportionally long, and the torsos relatively small. The forelimbs were proportionally enormous compared to the legs, with very long wing-fingers. As a pterosaur, ''Cimoliopterus'' would have been covered in pycnofibres (hair-like filaments), and had extensive wing-membranes, which were distended by the wing-fingers.

Rodrigues and Kellner provided a single diagnosis (a list of features distinguishing a taxon from its relatives) for the genus ''Cimoliopterus'' and species ''C. cuvieri'' in 2013, which Myers amended in 2015 when including ''C. dunni''. The holotype snouts of the two ''Cimoliopterus'' species share features that distinguish them from other pterodactyloid (or short-tailed) pterosaurs such as a premaxillary crest that begins hindward on the snout and that the palatal ridge (which ran along the middle of the palate) extended forwards until the third tooth socket pair. In both species, the second and third tooth sockets are similar in size and larger than the fourth. The spacing between the sockets is irregular, with those towards the front being more closely spaced, and those towards the back more widely separated. There are three tooth sockets per of jaw margin towards the front of the jaw in ''C. dunni'', while in ''C. cuvieri'' there are almost three sockets per . However, towards the back of the jaw, there are two sockets every in both species. The palate is curved upwards. The snout tips of ''C. cuvieri'' and ''C. dunni'' are only expanded subtly from side to side, unlike the "spoon-like" expansions seen in many other toothed pteranodontoids, such as ''Anhanguera'', ''Coloborhynchus'', and ''Ornithocheirus''. The subtle sideways expansion on the snout tip of ''Cimoliopterus'' results from the third pair of sockets being larger than the fourth pair, similar to what can be seen on the lower jaw of ''Aetodactylus''. The subtle expansion is so weakly developed that it has been thought absent at times.

''Cimoliopterus cuvieri''

The holotype of ''C. cuvieri'' is composed of the front of the snout, represented mainly by the premaxillae, including the premaxillary crest. Eleven tooth sockets are preserved on each side. The preserved part of the snout is narrow. ''C. cuvieri'' is distinct in that the premaxillary crest is placed hindward on the snout by the seventh socket pair, but before the nasoantorbital fenestra (a large opening in front of the eye that combined the antorbital fenestra with the bony nostril). ''C. cuvieri'' has a low snout compared to ''Ornithocheirus'' and also possesses a forward-facing first pair of tooth sockets, unlike that genus. Furthermore, ''C. cuvieri'' can be distinguished from the genus ''Anhanguera'' because it lacks an expansion at the front of the snout, a feature otherwise present in the family Anhangueridae. ''C. cuvieri'' also does not have its fourth and fifth pair of tooth sockets smaller than its third and sixth, which is a key feature of ''Anhanguera''.

Bowerbank and Owen described and figured the now lost teeth found with the ''C. cuvieri'' holotype in 1851. The right of the two frontmost sockets contained a newly erupted (emerged through the gums) tooth, which protruded about one-third of an inch downwards and forwards at an oblique angle. The fifth socket on the right side and the eighth on the left contained budding teeth that did not protrude past the sockets, lying close to the inner walls of the sockets of the fully erupted teeth. The two fully developed displaced teeth were slightly curved, somewhat compressed, and their breadth gradually diminished from the open bases to their tips. The tips were broken off, revealing they were composed of compact, hard dentine, that was sheathed by a thin coat of enamel. Fine, longitudinal ridges (or striations) unequal in length, with wide intervals mark the enamel. The largest of the displaced teeth was longer than , while the other was less than , and was found near the third pair of tooth sockets.

Other pterosaur species have been considered similar to ''C. cuvieri'', but most are too fragmentarily known to be unquestionably assigned to it or synonymised with it. For example, ''Pterodactylus fittoni'' shares with ''C. cuvieri'' a low snout tip, the lack of a front expansion at the end of the snout, a palate that is curved towards the back, as well as a palatal ridge extending hindward until the third pair of tooth sockets, though the latter feature is only shared with ''C. cuvieri'' if the first preserved pair of tooth sockets in ''P. fittoni'' is its second pair. The height of ''P. fittoni''s snout can be differentiated from that of ''C. cuvieri'', whose tip is also wider than high; the latter difference is possibly due to fracture, though, and the species cannot be unquestionably assigned. Another species, ''Ornithocheirus brachyrhinus'', shares a number of features with ''C. cuvieri'', including a curved palate, the front end being higher than wide, lack of a sideways expansion at the front of the snout and the lack of a crest at the front of the snout. The structure of ''O. brachyrhinus'' snout tip fully resembles that of ''C. cuvieri'', suggesting that ''O. brachyrhinus'' is assignable to this species. Even so, the holotype of ''O. brachyrhinus'' is fragmentary, and it is therefore impossible to conclude if it has a crest located towards the back, or if it has the size variation of tooth sockets that is distinct for ''C. cuvieri''.

Other species that have been considered synonyms of ''C. cuvieri'', like ''O. dentatus'' and ''O. enchorhynchus'', differ with the former having smaller tooth sockets that are placed closer together. The latter, while quite similar to ''C. cuvieri'' (sharing features including the lack of a hindward positioned crest, the palate curving towards the back, the first tooth pair facing forward, as well as the lack of a front expansion), is fragmentary like ''O. brachyrhinus'', which makes it hard to compare to other pterosaurs. ''O. scaphorhynchus'' has also been tentatively synonymised with ''C. cuvieri'', but the incompleteness of this species makes it difficult to assign it clearly to any genus. The margins of the tooth sockets in ''O. scaphorhynchus'' are poorly preserved, but it is dissimilar to the spacing pattern present in ''C. cuvieri''.

''Cimoliopterus dunni''

The holotype snout of ''C. dunni'' is composed of the front of the snout, comprising the premaxilla and maxilla (including a largely intact premaxillary crest), broken off just behind the 13th pair of tooth sockets. The cortical bone (the hard outer layer of bones) is well-preserved, though there are several regions where it is damaged or missing. The total number of tooth sockets preserved in the specimen is twenty-six. ''C. dunni'' is distinguished by the premaxillary crest beginning at the fourth socket pair, unlike that of ''C. cuvieri'', and the crest is slightly upwards curved, forming a front edge that is concave. The crest is fused entirely to the jaw, which indicates the individual was not a juvenile. The upper edge of ''C. dunni''s crest seems to descend moderately just before the broken portion, suggesting the crest was symmetrical from front to back when seen from the side. If the crest was symmetrical, the complete crest would have had a length of approximately . The maximum height of the crest is , which is above the ninth and tenth pair of tooth sockets. While crest-related features should be used with caution when identifying species, since they can be linked to growth stage or sexual dimorphism, the difference in crest-shape between ''C. dunni'' and ''C. cuvieri'' is probably unrelated to age, since the holotypes represent similarly sized individuals.

The tip of the snout in ''C. dunni'' is blunt. It is distinct in that the front surface of the jaw faces forwards and downwards, forming a 45° angle relative to the front part of the palate. Viewing the front end of ''C. dunni''s snout from below the palate, it expands as it goes further back to a maximum width of above the third pair of tooth sockets. It suddenly narrows to a minimum width of at the level of the fourth pair of sockets. The width of the snout continues increasing hindward until it reaches a maximum of at the broken part of the hind edge of the crest. An angle of 8° relative to the flat area of the rear part of the palate is presumed to be based on its front portion being reflected towards the back. An inflection point (the point where the surface changes) close to the level of the eighth tooth sockets can also be seen.

''C. dunni'' is distinct from ''C. cuvieri'' in that the first pair of tooth sockets is directed more downward than forward. The spaces between the tooth sockets measure a maximum of toward the front, and a minimum of towards the back. Since only a small replacement tooth is preserved in ''C. dunni'', the texture of its teeth is unknown. While the crown (the part covered in enamel) of this tooth lacks striations, it is possible they appeared in more developed teeth. At less than high, a narrow palatal ridge extends towards the front from the broken portion on the rear end of the premaxillary crest.

Classification

Early schemes

The taxonomic history of the type species of ''Cimoliopterus'', ''C. cuvieri'', is complicated, though English pterosaurs now known to have been close relatives were always considered similar to it. When it was first described, Bowerbank assigned ''C. cuvieri'' (then placed in ''Pterodactylus'') to a "long-nosed species" group, along with the species '' Pterodactylus longirostris'' based on similar snout proportions. Later, Owen assigned ''P. cuvieri'' to Dentirostres, a group characterised by jaws containing teeth to their ends, a sclerotic ring (ring of bone that surrounds the eyes), their scapula (shoulder blade) and coracoid (hook-like structure in the shoulder) not being joined with one another, as well as having a short movable tail. ''P. cuvieri'' was classified in this group due to the extremity of its upper jaw, which was sufficient to demonstrate it had a pair of tooth sockets close to the end.

In 1870, Seeley assigned ''P. cuvieri'' (under the name ''Ornithocheirus cuvieri'' in his classification) to a group named Ornithocheirae, which consisted only of the genus ''Ornithocheirus'', whose species were diagnosed as having teeth prolonged in front of the snout and a palate with a longitudinal (running lengthwise) ridge. In 1914, Hooley reviewed the genus ''Ornithocheirus'' and its taxonomy, dividing it into numbered groups with a designated generic (genus) name. Hooley followed Seeley in classifying ''P. cuvieri'' as a species of ''Ornithocheirus'', also assigning the species ''O. colorhinus'' and ''O. nasutus'' (now considered species of ''Camposipterus''), as well as the species ''O. brachyrhinus'', ''O. dentatus'', ''O. denticulatus'', ''O. enchorhynchus'', ''O. fittoni'', and ''O. oxyrhinus'', in addition to the species ''O. sedgwicki'' (now considered the type species of ''Aerodraco'', or alternatively a species of ''Camposipterus'') and ''O. polyodon'' as well. Hooley named this group "Group No. 1" and designated the genus name ''Ornithocheirus'' for it. He later assigned this genus to a subfamily called Ornithocheirinae, which was within a family called Ornithocheiridae. All the species in the genus ''Ornithocheirus'' were diagnosed as having sideways compressed beaks, with the tip more or less obtuse (with an angle over 90°), their palate being curved slightly upward and facing backward (which caused their front teeth to point directly forward), and having a longitudinal ridge on the palate. Their teeth were nearly circular and the margins of their tooth sockets rose above the palate.

21st century schemes

In 2001, Unwin considered ''A. cuvieri'' a member of Ornithocheiridae, along with many of the English and Brazilian Cretaceous species, and suggested that some pterosaur species from these countries belonged to the same genera, such as ''Anhanguera'', ''Ornithocheirus'' and ''Coloborhynchus''. In 2013, Witton described the state of ornithocheirid classification as infamously controversial and confused, with competing schemes used by different groups of palaeontologists. One group used the term Ornithocheiridae, whereas another used Anhagueridae, and there was no agreement on the number of genera and species. In its description by Rodrigues and Kellner in 2013, ''Cimoliopterus'', which consisted only of ''C. cuvieri'', was assigned to the group Pteranodontoidea, though in an uncertain position (''incertae sedis''), with it and "''Ornithocheirus''" ''polyodon'' forming a sister group to the new clade Anhangueria. They could not confirm that Ornithocheiridae was a monophyletic (natural) group, and restricted it to include ''Ornithocheirus simus'' alone. In 2014, in a phylogenetic analysis (the study of the evolutionary development of a species or a group) conducted by Chinese palaeontologist Xiaolin Wang and colleagues, ''Cimoliopterus'' was found to have been closely related to the pterosaur '' Ikrandraco'', which at the time, along with the pterosaurs belonging to the Anhangueria, were the only ones known to have had blade-like crests on their jaws.

In his description of ''C. dunni'', Myers used a modified version of the data set of an older phylogenetic analysis that he conducted with palaeontologist Brian Andres in 2013. The arrangement of the resulting cladograms ("family trees" showing interrelationships) depended on how the uncertain tooth texture of ''C. dunni'' was interpreted; if it was coded as "ambiguous", ''C. dunni'' became the sister taxon to a clade composed of ''C. cuvieri'' and ''Aetodactylus halli'', and if it was coded as striated, ''C. dunni'' became the sister taxon of ''C. cuvieri'', with ''A. halli'' as the sister taxon to that clade. In turn, this clade is the sister taxon to a clade composed of the species ''Cearadactylus atrox'', ''Brasileodactylus araripensis'', ''Ludodactylus sibbicki'', as well as the families Ornithocheiridae and Anhangueridae, all of which are members of the group Pteranodontoidea. Although Myers found ''Aetodactylus'' to be closely related to ''Cimoliopterus'', differences in jaw morphology and orientation and spacing of the tooth sockets indicate they are distinct from each other. Due to the similarities in the jaw form as well as the dentition of both ''C. dunni'' and ''C. cuvieri'', and clear differences from ''Aetodactylus'' in these features, ''Cimoliopterus'' is unlikely to be a paraphyletic (unnatural) group according to Myers.

In 2018, a phylogenetic analysis conducted by the American palaeontologist Nicholas Longrich and colleagues also recovered ''Aetodactylus'' and ''Cimoliopterus'' as sister taxa, reinforcing their close relationship. In 2019, the British palaeontologist Megan Jacobs and colleagues performed a phylogenetic analysis where they placed both ''C. cuvieri'' and ''C. dunni'' within the family Ornithocheiridae, as the sister taxon of ''Camposipterus nasutus''. In turn, their clade forms a polytomy (an unresolved group) along with the species ''Camposipterus colorhinus'' and ''C. sedgwickii''. This close relationship of ''C. cuvieri'' and ''Camposipterus'' was already recovered by Hooley in 1914 and by Unwin in 2001, though as species of ''Ornithocheirus'' and ''Anhanguera'', respectively. Also in 2019, the Brazilian palaeontologist Borja Holgado and colleagues recovered a clade consisting of ''Cimoliopterus'' and the Anhangueria, this clade being defined by a palate that is deflected towards the back. ''Ornithocheirus'' was recovered as the sister taxon to this clade, and in turn, all of them were placed within the group Ornithocheirae.

Later in 2019, Pêgas and colleagues redescribed the species ''Ornithocheirus wiedenrothi'' as '' Targaryendraco'', and named the new group Targaryendraconia, wherein ''Cimoliopterus'' was included. Some of the most notable characteristics of this group include the slenderness of the jaws, the front end of the dentary symphysis being particularly compressed sideways compared to other lanceodontians (the wider group to which they belong), its total width equaling about three times the tooth's socket width, as well as the subparallel lateral outline of the margins of the front half of both jaws in occlusal view (view from below the teeth). Pêgas and colleagues found ''Cimoliopterus'', ''Camposipterus'', and ''Aetodactylus'' to form a group which they named Cimoliopteridae. This group is supported by several synapomorphies (shared derived traits). ''Cimoliopterus'' and ''Camposipterus'' share the feature of having the first three pairs of upper tooth sockets closer to one another than the posterior ones, with the third one closer to the second one than to the fourth, the same pattern is seen in ''Aetodactylus'' but in its lower jaws instead of the upper ones. Further shared features between ''Cimoliopterus'' and ''Camposipterus'' include the presence of a palatal ridge that extends towards the front until the level between the third and second pair of tooth sockets as well as the location of the widest portion of the front part of the snout, which is at the third pair of tooth sockets. The cladogram of the phylogenetic analysis by Pêgas and colleagues is presented below on the right, showing the position of ''Cimoliopterus'' within Cimoliopteridae, while the other targaryendraconians, ''Aussiedraco'', ''Barbosania'' and ''Targaryendraco'', were grouped in Targaryendraconidae.

Cladogram 1: Jacobs and colleagues, 2019.

Cladogram 2: Pêgas and colleagues, 2019.

Evolution

Unwin stated in 2001 that the Cambridge Greensand and what is now the Grey Chalk Subgroup provided some of the youngest records of ornithocheirids, with ''A. cuvieri'' being the youngest known member of the group. Due to the more hindward positioned premaxillary crest of ''Cimoliopterus'', unlike those seen in anhanguerids, Rodrigues and Kellner suggested in 2013 that their crests could have evolved independently from each other. In 2015, Myers stated that the discovery of ''C. dunni'' in North America extended the distribution of the genus ''Cimoliopterus'', showing that the pterosaur faunas of Europe and North America were similar by the mid-Cretaceous despite the ongoing widening of the North Atlantic Ocean. That pterosaurs retained palaeobiogeographical (geographical distribution of prehistoric animal groups) affinities by the mid-Cretaceous was also supported by other related pterosaurs identified in North America, Europe and northern Africa, such as ''Coloborhynchus'' and ''Uktenadactylus''.

Myers elaborated in a press release that the population ancestral to ''C. dunni'' and ''C. cuvieri'' was able to move between North America and England until about 94 million years ago, as the similarity between the two species indicated that there had been little time between their divergence. As the Atlantic opened up the supercontinent Pangaea, populations of animals became isolated from each other, and diverged evolutionarily, but this pattern would have been more complicated with pterosaurs because they could fly across water bodies. Myers did not suggest the presence of a land bridge between the continents, but that the sea level fluctuated over time, and pterosaurs could have island-hopped between the land masses that emerged between. However, it still remained a mystery why no close ties had been identified between pterosaurs of North and South America, indicating there could have been a barrier to their dispersal.

In 2019, Pêgas and colleagues agreed with Rodrigues and Kellner that the crest of ''Cimoliopterus'' had evolved independently from those of anhanguerians, since closer related targaryendraconian taxa, such as ''Barbosania'', ''Camposipterus'', and ''Aetodactylus'', did not possess crests. According to their analysis, since ''Cimoliopterus'' was more closely related to ''Targaryendraco'' (of Hauterivian age), ''Aussiedraco'' (of Albian age) and ''Barbosania'' (also Albian) than to anhanguerians, this would help fill a temporal gap that would otherwise result in a ghost-lineage leading to ''Cimoliopterus'' going back to the Valanginian age. Pêgas and colleagues thought the slight sideways expansion in the jaws of ''Aetodactylus'' and ''Cimoliopterus'' differed from the rosette-like condition seen in the jaws of anhanguerians, and that it was unclear if the condition in the former group was a precursor stage to that of the latter, with this issue needing further investigation. They concluded that the recognition of the clade Targaryendraconia showed the ''Cimoliopterus''-lineage was a diverse and cosmopolitan sister-group of Anhangueria, with the two having a similar stratigraphic distribution.

Palaeobiology

Feeding

In 1987, Wellnhofer stated that while the crests of pterosaurs such as ''Pteranodon'' and ''Dsungaripterus'' were probably used as aerodynamic rudders or as areas for muscle attachment, the crests on the front ends of the jaws of ''Tropeognathus'' and its relatives could not serve this purpose. He proposed instead that these crests could have functioned as the keel of a boat, to stabilise the jaws in water while skimming and catching fish with the jaws submerged at high speed. The shape of the keel would reduce flow-resistance, keeping the head in a stable position, and would therefore have a hydrodynamic rather than aerodynamic function. In 1991, he elaborated they would have fished while flying just above the water, by thrusting the long head rapidly forward, dipping it in the water, and seizing prey with their pointed jaws.

The Dutch palaeontologist André J. Veldmeijer and colleagues pointed out in 2006 that apart from ornithocheirids usually being found in deposits associated with water, their interlocking teeth also supported piscivory (fish-eating), being built for spearing slippery prey rather than cutting or slashing. The long, curved front teeth would be suited for catching slippery prey such as fish, and the smaller teeth at the back of the jaws ensured food was held and transported down the throat. The frontal position of the eyes and some adaptations to the brain may have been related to accurately evaluating the position of a fish before entering the water. They also pointed out that the differences in crest position, size of the palatinal ridge, and the presence or absence of a front expansion of the jaw, made it hard to believe they all obtained food in the same way, but that this did not rule out some overlap.

Veldmeijer and colleagues noted that since the bodies of these pterosaurs were small, they would not have had space for large fish, and such fish may also have altered their flight capability, as is the case for bats. They may have hunted small fish or pre-digested them before swallowing (since their teeth were not adapted for chewing), but the second option would have required cheeks or throat pouches to keep prey inside the mouth; the latter has been reported in some pterosaurs. They ruled out skimming as a feeding method, since they believed it would cause problems for flying stability if a wing tip touched the water surface. The authors supported Wellnhofer's fish-snatching hypothesis by testing a geometrical model based on the skull and neck of ''Anhanguera'', and suggested it would have approached the water with its head parallel to the surface, turned it down while extending the neck forwards to reach the slower moving fish, while the crest helped maintain stability by counteracting the force of the water. They concluded that the premaxillary crests were probably for minimising water attrition, and therefore not for sexual display. They were unable to determine what the consequences were of ''Anhanguera'' having a more hindward placed crest than ''Coloborhynchus'' and ''Ornithocheirus''.

Witton stated in 2012 that ornithocheirids showed adaptations for feeding without landing, with teeth of varying size that protruded from the jaw from many angles. Only using the front teeth to grab prey helped distance the body from the water's surface, minimising the chance of crashing. In 2013, Witton noted the skim-feeding hypothesis for ornithocheirids had been questioned, but that dip-feeding (as seen among terns and frigatebirds) was supported by various features, like their elongated snouts, well-suited for reaching swimming animals, as well as their "fish-grab" tooth arrangement. Witton doubted the idea that the premaxillary crests were used to stabilise jaw tips when being plunged into water for food, since some ornithocheirids lacked such crests completely, and modern dip-feeders can achieve the same without similar structures. The diversity of tooth-morphology in ornithocheirids indicates that feeding methods other than dip-feeding were also employed by members of the group, such as reaching for food while on the water's surface or diving shallowly under the surface. Instead of being used for stabilisation during skimming or flight, Witton considered the crests of pterosaurs to have been display structures, as the crests are thought to have been sexually dimorphic in some species. In 2022, the Brazilian palaeontologist Rudah Ruano C. Duque and colleagues reported a crestless ''Anhanguera'' specimen, which they argued was evidence for the crests being linked to growth development or sexual dimorphism.

Locomotion

Witton summarised ideas of ornithocheirid locomotor abilities in 2013 and stated that features such as small legs but large wings, low body masses for their wing-spans, wings with high aspect ratios, and reduced wing-loading indicates they preferred life in the air and were adapted for long-distance soaring. Since their wing-shapes were similar to those of oceanic seabirds, they were probably better adapted for oceanic soaring than soaring over terrestrial areas, which is supported by their fossils being found mainly in marine deposits. They were possibly able to take off from water, which would be helped by their small torsos and legs. Their terrestrial locomotion was probably limited by their short legs, and they may have been restricted to slower shuffling walks (so that the long forelimbs did not outpace the hindlimbs) and faster bounding, which indicates they may have spent limited time on the ground. As has been hypothesised for pterosaurs in general, they probably took flight by launching quadrupedally, and they were possibly able to swim fairly well to be able to take off from water surfaces.

In 2017, the British biologist Colin Palmer used CT scans of ornithocheirid pterosaur wing-bones, including the wing phalanx that had been assigned to ''C. cuvieri'', to reconstruct the wing spar (the main structural element) of pterosaur wing-membranes. He used the bending strength of the wing spar of a structural model with a wing span based on the CT scans to infer the likely tension of the wing membrane needed to suppress aeroelastic flutter (instability caused by air resistance) at high flight speeds, and minimising ballooning, thus preventing structural failure of the membrane under flight loads. The three estimates were of similar magnitude, implying the membrane would have high-modulus material (Young's modulus, tensile elasticity), which supports the idea that the aktinofibril layer (structural fibres inside the wings of pterosaurs) on the outside of the membrane which reinforced pterosaur wings were of keratinous material (the same material in human hair and nails), and differed greatly from the membranes of bats.

Palaeoenvironment

The holotype of ''C. cuvieri'' was found in Kent, England, collected in chalks and marls of the Grey Chalk Subgroup, which dates to the Cenomanian-Turonian ages of the Upper Cretaceous, though the precise stratigraphic position of the specimen is unknown. The Grey Chalk Subgroup has also been known historically as the Lower Chalk Formation or Chalk Marl, and is now considered a member within the Chalk Group, which has itself also been known as the Chalk Formation. The Grey Chalk Subgroup consists of shallow marine deposits, composed of clayey or marley chalk without flint, and has been geologically dated based on biostratigraphic zones defined by the presence of the ammonites '' Mantelliceras mantelli'' and '' Calycoceras guerangeri'' (index fossils used to date layers). Other animals known from the Grey Chalk Subgroup include pterosaurs such as ''Lonchodraco'' and many dubious species, and dinosaurs like the indeterminate nodosaurid ''Acanthopholis'' and the hadrosauroid "Iguanodon" ''hilli''.

The holotype of ''C. dunni'' was found in the Britton Formation of north-central Texas, which dates to the Cenomanian stage of the early Late Cretaceous. The formation is part of the Upper Cretaceous Eagle Ford Group, which dates to the middle Cenomanian to late Turonian ages (96–90 million years ago). The specimen was preserved in a layer of grey marine shale with iron-oxide concretions, and found in the '' Sciponoceras gracile'' ammonite zone, situated in the upper–middle part of the Britton Formation, which dates to the late Cenomanian, approximately 94 million years ago. Abundant fossil remains of ammonites and crustaceans are contained in the dark grey shales in which ''C. dunni'' was found, which is consistent with having been deposited in marine shelf environments that were low in energy and poorly oxygenated. The area it was found in would have been off shore in the shallow Western Interior Seaway, which covered the central part of the US and Canada. Other animals of the Britton Formation include decapods, ammonites, fish (including sharks), plesiosaurs, turtles, and coniasaurs. Coprolites (fossil faeces) attributed to fish are also known.

See also

* List of pterosaur genera
* Timeline of pterosaur research

References

Works cited

*
*
*

External links

Southern Methodist University – New toothy Texas pterosaur, with an English cousin – Timothy Myers talks about ''Cimoliopterus dunni''

{{Portal bar, Paleontology, Cretaceous, United States, United Kingdom

Pteranodontoids
Cenomanian life
Early Cretaceous pterosaurs of Europe
Late Cretaceous pterosaurs of Europe
Cretaceous England
Fossils of England
Late Cretaceous pterosaurs of North America
Cretaceous Texas
Paleontology in Texas
Fossil taxa described in 2013
Taxa named by Alexander Kellner