HOME

TheInfoList



OR:

The Caproni Campini N.1, also known as the C.C.2, is an experimental
jet aircraft A jet aircraft (or simply jet) is an aircraft (nearly always a fixed-wing aircraft) propelled by one or more jet engines. Whereas the engines in Propeller (aircraft), propeller-powered aircraft generally achieve their maximum efficiency at much ...
built in the 1930s by Italian aircraft manufacturer Caproni. The N.1 first flew in 1940 and was briefly regarded as the first successful jet-powered aircraft in history, before news emerged of the German Heinkel He 178's first flight a year earlier.Enzo Angelucci; Paolo Matricardi. ''Campini Caproni C.C.2 in Guida agli Aeroplani di tutto il Mondo''. Mondadori Editore. Milano, 1979. Vol. 5, pp. 218–219. During 1931, Italian aeronautics engineer
Secondo Campini Secondo Campini (August 28, 1904 – February 7, 1980) was an Italian engineer and one of the pioneers of the jet engine. Campini was born at Bologna, Emilia-Romagna. In 1931 he wrote a proposal for the Ministry of Defence (Italy), Italian Air Min ...
submitted his studies on jet propulsion, including a proposal for a so-called ''thermo-jet'' to power an aircraft. Following a high-profile demonstration of a jet-powered boat in
Venice Venice ( ; ; , formerly ) is a city in northeastern Italy and the capital of the Veneto Regions of Italy, region. It is built on a group of 118 islands that are separated by expanses of open water and by canals; portions of the city are li ...
, Campini was rewarded with an initial contract issued by the Italian government to develop and manufacture his proposed engine. During 1934, the '' Regia Aeronautica'' (the Italian Air Force) granted its approval to proceed with the production of two jet-powered
prototype A prototype is an early sample, model, or release of a product built to test a concept or process. It is a term used in a variety of contexts, including semantics, design, electronics, and Software prototyping, software programming. A prototype ...
aircraft. To produce this aircraft, which was officially designated as the ''N.1'', Campini formed an arrangement with the larger Caproni aviation manufacturer. The N.1 is powered by a motorjet, a type of
jet engine A jet engine is a type of reaction engine, discharging a fast-moving jet (fluid), jet of heated gas (usually air) that generates thrust by jet propulsion. While this broad definition may include Rocket engine, rocket, Pump-jet, water jet, and ...
in which the compressor is driven by a conventional
reciprocating engine A reciprocating engine, more often known as a piston engine, is a heat engine that uses one or more reciprocating pistons to convert high temperature and high pressure into a rotating motion. This article describes the common features of al ...
. On 27 August 1940, the first flight of the N.1 took place at the Caproni facility in Taliedo, outside
Milan Milan ( , , ; ) is a city in northern Italy, regional capital of Lombardy, the largest city in Italy by urban area and the List of cities in Italy, second-most-populous city proper in Italy after Rome. The city proper has a population of nea ...
, flown by Mario de Bernardi. The N.1 achieved mixed results; while it was perceived and commended as a crucial milestone in aviation (until the revelation of the He 178's earlier flight), the performance of the aircraft was unimpressive. It was slower than many existing conventional aircraft of the era, while the motorjet engine was incapable of producing sufficient thrust to deliver adequate performance for a
fighter aircraft Fighter aircraft (early on also ''pursuit aircraft'') are military aircraft designed primarily for air-to-air combat. In military conflict, the role of fighter aircraft is to establish air supremacy, air superiority of the battlespace. Domina ...
. As such, the N.1 programme never led to any operational combat aircraft, and the motorjet design was soon superseded by more powerful turbojets. Only one of the two examples of the N.1 to have been constructed has survived to the present day.


Background

During 1931, Italian aeronautics engineer
Secondo Campini Secondo Campini (August 28, 1904 – February 7, 1980) was an Italian engineer and one of the pioneers of the jet engine. Campini was born at Bologna, Emilia-Romagna. In 1931 he wrote a proposal for the Ministry of Defence (Italy), Italian Air Min ...
submitted a report to the '' Regia Aeronautica'' (the Italian Air Force) on the potential of jet propulsion; this report included his proposals for one such implementation, which he referred to as a ''thermo-jet''. That same year, Campini established a company, with his two brothers, called the "Velivoli e Natanti a Reazione" (Italian for "Jet Aircraft and Boats") to pursue the development of this engine. In April 1932, the company demonstrated a
pump-jet A pump-jet, hydrojet, or water jet is a marine system that produces a jet of water for propulsion. The mechanical arrangement may be a ducted propeller (axial-flow pump), a centrifugal pump, or a mixed flow pump which is a combination of bot ...
propelled boat in Venice. The boat achieved a top speed of , a speed comparable to a boat with a conventional engine of similar output. The Italian Navy, who had funded the development of the boat, placed no orders and vetoed the sale of the design outside Italy. During 1934, the ''Regia Aeronautica'' granted approval for the development of a pair of
prototype A prototype is an early sample, model, or release of a product built to test a concept or process. It is a term used in a variety of contexts, including semantics, design, electronics, and Software prototyping, software programming. A prototype ...
s, along with a static
testbed A testbed (also spelled test bed) is a platform for conducting rigorous, transparent, and replicable testing of scientific theories, computing tools, and new technologies. The term is used across many disciplines to describe experimental research ...
, for the purpose of demonstrating the principle of a jet aircraft, as well as to explore potential military applications. As his company lacked the necessary industrial infrastructure for such endeavours, Campini formed an arrangement with the larger Caproni aviation manufacturer, under which the latter provided the required material assistance for the manufacturing of the prototypes. Under this relationship, Campini developed his design, which later received the official Italian Air Force designation of ''N.1''.Pavelec 2007, p. 5. Historian Nathanial Edwards has contrasted the relative openness of Italian early jet development work against the high levels of secrecy present within other nation's programmes, such as Britain and Germany. He speculated that this was due to desire of the Italian government to be perceived as possessing a modern and advanced aviation industry, being keen to acquire national prestige and renown for such achievements. Edwards went on to claim that the practicality of the N.1 design was undermined by political pressure to speed the programme along so that Italy would be more likely to be the first country in the world to perform a jet-powered flight.Edwards, Nathanial. "Flight as Propaganda in Fascist Italy." ''World At War Magazine'', Late 2010.


Design

The Caproni Campini N.1 is an experimental aircraft, designed to demonstrate the practicality of jet propulsion and its viability as an engine for aircraft. It was a monoplane built entirely out of
duralumin Duralumin (also called duraluminum, duraluminium, duralum, dural(l)ium, or dural) is a trade name for one of the earliest types of age hardening, age-hardenable aluminium–copper alloys. The term is a combination of ''Düren'' and ''aluminium'' ...
, with an
elliptical wing An elliptical wing is a wing planform whose leading and trailing edges each approximate two segments of an ellipse. It is not to be confused with annular wings, which may be elliptically shaped. Relatively few aircraft have adopted the elliptic ...
. The original design was to have the aircraft cockpit pressurised but this facility was never installed. The aircraft was fitted with dual controls allowing it to be flown from either of the two seats. Both seats had individual rearward sliding canopies however, flight testing quickly revealed that, due to the excessive heat output of the propulsion system, the canopy had to be left permanently open as a mitigating measure. The engine of the N.1 differs substantially from the later-produced
turbojet The turbojet is an airbreathing jet engine which is typically used in aircraft. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet which includes inlet guide vanes, a compressor, a combustion chamber, and ...
and
turbofan A turbofan or fanjet is a type of airbreathing jet engine that is widely used in aircraft engine, aircraft propulsion. The word "turbofan" is a combination of references to the preceding generation engine technology of the turbojet and the add ...
engines. One crucial difference in Campini's design is that the
compressor A compressor is a mechanical device that increases the pressure of a gas by reducing its volume. An air compressor is a specific type of gas compressor. Many compressors can be staged, that is, the gas is compressed several times in steps o ...
– a three-stage, variable-incidence one, located forward of the cockpit – was driven by a conventional
piston engine A reciprocating engine, more often known as a piston engine, is a heat engine that uses one or more Reciprocating motion, reciprocating pistons to convert high temperature and high pressure into a Circular motion, rotating motion. This article ...
, this being a , liquid-cooled Isotta Fraschini unit. The airflow provided by the compressor was used to cool the engine before being mixed with the engine's exhaust gases, thus recovering most of the heat energy that in traditional piston-propeller designs would be wasted. A ring-shaped burner then injected fuel into the gas flow and ignited it, immediately before the exhaust
nozzle A nozzle is a device designed to control the direction or characteristics of a fluid flow (specially to increase velocity) as it exits (or enters) an enclosed chamber or pipe (material), pipe. A nozzle is often a pipe or tube of varying cross ...
, to further increase thrust. In practice the engine provided enough thrust for flight without activating the rear burner, making the design somewhat similar to a
ducted fan In aeronautics, a ducted fan is a thrust-generating mechanical fan or Propeller (aeronautics), propeller mounted within a cylindrical wiktionary:duct, duct or shroud. Other terms include ducted propeller or shrouded propeller. When used in vertic ...
coupled to an
afterburner An afterburner (or reheat in British English) is an additional combustion component used on some jet engines, mostly those on military supersonic aircraft. Its purpose is to increase thrust, usually for supersonic flight, takeoff, and combat ...
. Campini referred to this configuration as being a ''thermojet'', although it has since become commonly known as '' motorjet''.Pavelec 2007, pp. 5–6. The relatively small size of the duct limited the mass flow and thus the propulsive efficiency of the engine. In modern designs this is offset through high
overall pressure ratio In aeronautical engineering, overall pressure ratio, or overall compression ratio, is the amount of times the pressure increases due to ram compression and the work done by the compressor stages. The compressor pressure ratio is the ratio of the ...
s, which could not be achieved on the N.1, therefore resulting in relatively low thrust and poor
fuel efficiency Fuel efficiency (or fuel economy) is a form of thermal efficiency, meaning the ratio of effort to result of a process that converts chemical energy, chemical potential energy contained in a carrier (fuel) into kinetic energy or Mechanical work, w ...
. Ground tests performed with the static testbed produced a thrust of around .


Operational history

The N.1's first flight was made on 27 August 1940 by test pilot Mario De Bernardi at Caproni's facility in Taliedo, outside
Milan Milan ( , , ; ) is a city in northern Italy, regional capital of Lombardy, the largest city in Italy by urban area and the List of cities in Italy, second-most-populous city proper in Italy after Rome. The city proper has a population of nea ...
. He would conduct the majority of the N.1's test flights. The first flight lasted ten minutes, during which de Bernardi kept the speed below , less than half throttle. Although the first flight of the jet-powered Heinkel He 178 had been made a year before to the day, it had not been made public, so the ''
Fédération Aéronautique Internationale The World Air Sports Federation (; FAI) is the world governing body for air sports, and also stewards definitions regarding human spaceflight. It was founded on 14 October 1905, and is headquartered in Lausanne, Switzerland. It maintains worl ...
'' recorded the N.1 as the first successful flight by a jet aircraft. Flight tests with the first prototype revealed several issues with the engine. It did not produce sufficient thrust to achieve the anticipated performance if it was matched to a strengthened airframe to withstand the high loading pressures. The engine generated considerable heat, which forced the pilot to fly with the canopy open throughout the flight, which although effectively venting the heat, increased drag. According to aviation author Sterling Michael Pavelec the N.1 was "heavy and underpowered" and the conventionally-powered Caproni Vizzola F.4 was faster which he attributed to limited national resources which left development programs underfunded. On 30 November 1941 the second prototype (Caproni construction No 4850) was flown by de Bernardi, with Giovanni Pedace as a passenger, from Milan's
Linate Airport Milan Linate Airport is a city airport located in Milan, the second-largest city and largest urban area of Italy. It served 10.6 million passengers and recorded 118,060 aircraft movements in 2024, making it one of the busiest airports in Ital ...
to Rome's Guidonia Airport. During the flight adverse weather caused a diversion and resulting in an unplanned flight over
Pisa Pisa ( ; ) is a city and ''comune'' (municipality) in Tuscany, Central Italy, straddling the Arno just before it empties into the Ligurian Sea. It is the capital city of the Province of Pisa. Although Pisa is known worldwide for the Leaning Tow ...
. On 5 December 1941, de Bernardi made a flight over central Rome following a request from
Benito Mussolini Benito Amilcare Andrea Mussolini (29 July 188328 April 1945) was an Italian politician and journalist who, upon assuming office as Prime Minister of Italy, Prime Minister, became the dictator of Fascist Italy from the March on Rome in 1922 un ...
. On 6 December 1941, Mussolini inspected the aircraft and watched de Bernardi demonstrate its capabilities. Testing of the first Caproni Campini N.1 prototype (Caproni construction No 4849) by the Italian military took place from December 1941 to August 1942 with the aircraft receiving its military serial number (MM.487) on 30 December 1941. During the test program the aircraft was regularly shown off to foreign delegations. The last known flight by a Caproni Campini N.1 took place on the 27 August 1942. In June 1944, MM.487 was found by Allied forces in its hangar at Guidonia airport. The aircraft was badly damaged either from allied bombing raids or by the retreating Germans. The damaged prototype was transported to the United Kingdom for study at the
Royal Aircraft Establishment The Royal Aircraft Establishment (RAE) was a British research establishment, known by several different names during its history, that eventually came under the aegis of the Ministry of Defence (United Kingdom), UK Ministry of Defence (MoD), bef ...
(RAE) in Farnborough. The aircraft was later scrapped at RAF Newton in 1949. The other example MM.448 (Caproni construction No 4850) survived the war in excellent condition.


Further developments

A variant of the Yokosuka MXY-7 Ohka, built in Japan towards the end of WW2, was powered by a Ishikawajima Tsu-11 motorjet based on Campini's design. The
Soviets The Soviet people () were the citizens and nationals of the Soviet Union. This demonym was presented in the ideology of the country as the "new historical unity of peoples of different nationalities" (). Nationality policy in the Soviet Union ...
were influenced by reports of the Campini Caproni N1 and developed the Kholshchevnikov VRDK motorjet engine which was used in the Mikoyan-Gurevich I-250 and the Sukhoi Su-5 aircraft. The Caproni company proposed a development of their Reggiane Re.2005 Sagittario single-seat fighter with the auxiliary 370 h.p. engine used to drive two centrifugal compressors. One compressor was to be used for supercharging the main Daimler-Benz DB 605 engine, and the auxiliary unit, while the second would be used to provide reaction propulsion.


Surviving aircraft

The surviving example is now on display at the Italian Air Force Museum at Vigna di Valle, near Rome, and the ground testbed, consisting of only the fuselage, is on display at the National Museum of Science and Technology in Milan.Pavelec 2007, p. 6.


Specifications


See also


References


Citations


Bibliography

* * * Golly, John. ''Jet: Frank Whittle and the Invention of the Jet Engine.'' Datum Publishing, 1996. . * * Mark, Harrison. ''The Economics Of Coercion And Conflict.'' World Scientific, 2014. . * Morse, Stan. ''Illustrated Encyclopedia of Aircraft.'' Orbis Publishing, 1982. * Pavelec, Sterling Michael. ''The Jet Race and the Second World War.'' Praeger Security International: Westport, Connecticut. 2007. .


External links


Photographs and a cutaway drawing of the N.1
*
Jet Propulsion pg 50, Life, November 27, 1944
{{Portal bar, Italy, Companies, Aviation Campini N.1 1940s Italian experimental aircraft Motorjet-powered aircraft Low-wing aircraft World War II jet aircraft of Italy Aircraft first flown in 1940