|
Detroit Tank Arsenal
Detroit Arsenal (DTA), formerly Detroit Arsenal Tank Plant (DATP) was the first manufacturing plant ever built for the mass production of tanks in the United States. Established in 1940 under Chrysler, the plant was owned by the U.S. government until 1996. It was designed by architect Albert Kahn. The building was designed originally as a "dual production facility", so that it could make armaments and be turned into peaceful production at war's end. Notwithstanding its name, the site was located in Warren, Michigan, Detroit's most populous suburb. History Chrysler's construction effort at the plant in 1941 was one of the fastest on record. The first tanks rumbled out of the plant before its complete construction. During World War II, the Detroit Arsenal Tank Plant built a quarter of the 89,568 tanks produced in the U.S. overall. The plant made M3 Lee tanks while the buildings were still being raised and switched to M4 Sherman tanks in 1942. The Korean War boosted production ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Warren, Michigan
Warren is a city in Macomb County in the U.S. state of Michigan. The 2020 Census places the city's population at 139,387, making Warren the largest city in Macomb County, the third largest city in Michigan, and Metro Detroit's largest suburb. The city is home to a wide variety of businesses, including General Motors Technical Center, the United States Army Detroit Arsenal, home of the United States Army TACOM Life Cycle Management Command and the Tank Automotive Research, Development and Engineering Center (TARDEC), the headquarters of Big Boy Restaurants International, and Asset Acceptance. The current mayor is James R. Fouts, who was elected to his first mayoral term in November 2007. History Beebe's Corners, the original settlement in what would become the city of Warren, was founded in 1830 at the corner of Mound Road and Chicago Road; its first resident was Charles Groesbeck. [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
M1 Abrams
The M1 Abrams is a List of main battle tanks by generation, third-generation American main battle tank designed by Chrysler Defense (now General Dynamics Land Systems) and named for General Creighton Abrams. Conceived for modern Armoured warfare, armored ground warfare and now one of the heaviest tanks in service at nearly 68 short tons (almost 62 tonne, metric tons), it introduced several modern technologies to US armored forces, including a multifuel gas turbine, turbine engine, sophisticated Chobham armour, Chobham composite armor, a computer fire control system, separate ammunition storage in a blow-out compartment, and Weapon of mass destruction, NBC protection for crew safety. Initial models of the M1 were armed with a licensed-produced 105 mm Royal Ordnance L7 gun, while later variants feature a licensed Rheinmetall Rh-120, Rheinmetall 120 mm L/44. The M1 Abrams was developed from the failure of the MBT-70 project to replace the obsolescent M60 tank. There are three ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
M60 Patton
The M60 is an American List of main battle tanks by generation#Second generation, second-generation main battle tank (MBT). It was officially standardized as the Tank, Combat, Full Tracked: 105-mm Gun, M60 in March 1959. Although developed from the M48 Patton, the M60 tank series was never officially christened as a Patton tank. The US Army considered it a "product-improved descendant" of the Patton tank's design. The design similarities are evident comparing the original version of the M60 and the M48A2. It has been sometimes informally grouped as a member of the Patton tank family. The United States fully committed to the MBT doctrine in 1963, when the United States Marine Corps, Marine Corps retired the last (M103 (heavy tank), M103) heavy tank battalion. The M60 tank series became America's primary main battle tank during the Cold War, reaching a production total of 15,000 M60s. Hull production ended in 1983, but 5,400 older models were converted to the M60A3 variant ending i ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
M67 Flame Thrower Tank
The Flame Thrower Tank M67 (also known as M67 "Zippo", nicknamed after a popular brand of cigarette lighter) is an American flame tank that was briefly used by the U.S. Army, and later by the U.S. Marine Corps during the Vietnam War. It was the last flamethrower tank used in American military service. Background and development Drawing on the experiences of crews of M4 Sherman tanks that were converted into flamethrower tanks and used during World War II, the U.S. Army Chemical Corps began work on a successor tank that was designed for the battlefields of the Cold War. Work on the design took place between 1952 and 1954, utilizing a modified M48 tank chassis, at the initiative of the US Marine Corps. Production commenced in 1955 and ran for either a single year or four, depending on some estimates. A total of 109 M67 tanks were produced for the Marine Corps and US Army The United States Army (USA) is the land service branch of the United States Armed Forces. It is on ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
M47 Patton
The M47 Patton was an American main battle tank, a development of the M46 Patton mounting an updated turret, and was in turn further developed as the M48 Patton. It was the second American tank to be named after General George S. Patton, commander of the U.S. Third Army during World War II and one of the earliest American advocates of tanks in battle. The M47 was the U.S. Army's and Marine Corps' primary tank, intended to replace the M26 Pershing and M46 Patton medium tanks.although the Ordnance Committee Minutes/OCM #33476 ceased utilizing the heavy, medium, and light tank designations on 7 November 1950; going to the "...Gun Tank designation") The M47 was widely used by U.S. Cold War allies, both SEATO and NATO countries, and was the only Patton series tank that never saw combat while in US service. Although the later M48s and M60s were similar in appearance, those were completely new tank designs. Many different M47 Patton models remain in service internationally. The ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
M46 Patton
The M46 Patton is an American medium tank designed to replace the M26 Pershing and M4 Sherman. It was one of the U.S Army's principal medium tanks of the early Cold War, with models in service from 1949 until the mid-1950s. It was not widely used by U.S. Cold War allies, being exported only to Belgium, and only in small numbers to train crews on the upcoming M47 Patton. The M46 was the first tank to be named after General George S. Patton Jr., commander of the U.S. Third Army during World War II and one of the earliest American advocates for the use of tanks in battle. History After World War II, most U.S. Army armored units were equipped with a mix of M4 Sherman and M26 Pershing tanks. Designed initially as a heavy tank, the M26 Pershing tank was reclassified as a medium tank after the war. The M26 was a significant improvement over the M4 Sherman in firepower and protection. Its mobility, however, was deemed unsatisfactory for a medium tank, as it used the same engine as t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
M26 Pershing
The M26 Pershing was a heavy tank/medium tank of the United States Army. It was used in the last months of World War II during the Invasion of Germany and extensively during the Korean War. The tank was named after General of the Armies John J. Pershing, who led the American Expeditionary Force in Europe in World War I. The M26 was intended as a replacement of the M4 Sherman, but a prolonged development period meant that only a small number saw combat in Europe. Based on the criteria of firepower, mobility, and protection, US historian R. P. Hunnicutt ranked the Pershing behind the German Tiger II heavy tank, but ahead of the Tiger I heavy and Panther medium tanks. It was withdrawn in 1951 in favor of its improved derivative, the M46 Patton, which had a more powerful and reliable engine and advanced suspension. The lineage of the M26 continued with the M47 Patton, and was reflected in the new designs of the later M48 Patton and M60 Patton. Production history Development ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
M4 Sherman
} The M4 Sherman, officially Medium Tank, M4, was the most widely used medium tank by the United States and Western Allies in World War II. The M4 Sherman proved to be reliable, relatively cheap to produce, and available in great numbers. It was also the basis of several other armored fighting vehicles including self-propelled artillery, tank destroyers, and armored recovery vehicles. Tens of thousands were distributed through the Lend-Lease program to the British Commonwealth and Soviet Union. The tank was named by the British after the American Civil War General William Tecumseh Sherman. The M4 Sherman evolved from the M3 Medium Tank, which for speed of development had its main armament in a side sponson mount. The M4 retained much of the previous mechanical design, but moved the main 75 mm gun into a fully traversing central turret. One feature, a one-axis gyrostabilizer, was not precise enough to allow firing when moving but did help keep the gun aimed in rough ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
M3 Lee
The M3 Lee, officially Medium Tank, M3, was an American medium tank used during World War II. The turret was produced in two forms, one for US needs and one modified to British requirements to place the radio next to the commander. In British Commonwealth service, the tank was called by two names: tanks employing US pattern turrets were called "Lee," named after Confederate general Robert E. Lee, while those with British pattern turrets were known as "Grant," named after Union general Ulysses S. Grant. Design commenced in July 1940, and the first M3s were operational in late 1941. The US Army needed a medium tank armed with a 75mm gun and, coupled with the United Kingdom's immediate demand for 3,650 medium tanks, the Lee began production by late 1940. The design was a compromise meant to produce a tank as soon as possible. The M3 had considerable firepower and good armor, but had serious drawbacks in its general design and shape, including a high silhouette, an archaic sponson ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
United States Army TACOM Life Cycle Management Command
The United States Army Tank-automotive and Armaments Command (TACOM), and its subordinate Life Cycle Management Command (LCMC),Lieutenant Colonel James O. Winbush, Jr., Christopher S. Rinaldi, and Antonia R. Giardina (2005-01-05) Life Cycle Management: Integrating Acquisition and Sustainment documents the 2001 intention, now moot as of 2018, to combine acquisition and sustainment headquartered at the http://garrison-michigan.army.mil/sites/garrison/garrison%20main. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
United States Army CCDC Ground Vehicle Systems Center
The United States Army DEVCOM Ground Vehicle Systems Center (GVSC) (formerly United States Army Tank Automotive Research, Development and Engineering Center (TARDEC)), located in Warren, Michigan, is the United States Armed Forces' research and development facility for advanced technology in ground systems. It is part of the U.S. Army Combat Capabilities Development Command (DEVCOM), a major subordinate command of the U.S. Army Futures Command. GVSC shares its facilities with the United States Army Tank-automotive and Armaments Command (TACOM). Current technology focus areas include Ground Vehicle Power and Mobility (GVPM), Ground System Survivability and Force Protection, among others. Laboratories It features a number of research laboratories, including: * Laser Protection Laboratory * Crew Station Systems Integration Laboratory * Robotic Systems Integration Laboratory * Ground Vehicle Simulation Laboratory — ride motion simulator, pintle motion based simulator, crew ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Installation Management Command
The United States Army Installation Management Command (IMCOM) is a support formation of the United States Army responsible for the day-to-day management of Army installations around the globe. Army garrisons are communities that provide many of the same types of services expected from any small city. IMCOM is a major subordinate command of U.S. Army Materiel Command (AMC). IMCOM is headquartered at Fort Sam Houston. History IMCOM was activated on 24 October 2006, to reduce bureaucracy, apply a uniform business structure to manage U.S. Army installations, sustain the environment and enhance the well-being of the military community. It consolidated three organizations under a single command as a direct reporting unit: #The former Installation Management Agency (IMA) #The former Community and Family Support Center, now called Family and MWR Programs, which was formerly a subordinate command of IMCOM. #The former Army Environmental Center, now called the Army Environmental Comm ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Warren, Michigan")
