|
Strake Jesuit College Preparatory Alumni
On a vessel's hull, a strake is a longitudinal course of planking or plating which runs from the boat's stempost (at the bows) to the sternpost or transom (at the rear). The garboard strakes are the two immediately adjacent to the keel on each side. The word derives from traditional wooden boat building methods, used in both carvel and clinker construction. In a metal ship, a strake is a course of plating. Construction In small boats strakes may be single continuous pieces of wood. In larger wooden vessels strakes typically comprise several planks which are either scarfed, or butt-jointed and reinforced with a butt block. Where the transverse sections of the vessel's shape are fuller, the strakes are wider; they taper toward the ends. In a riveted steel ship, the strakes were usually lapped and joggled (one strake given projections to match indentions in the one adjoining), but where a smoother finish was sought they might be riveted on a butt strap, though this w ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Clinker (boat Building)
Clinker-built, also known as lapstrake-built, is a method of boat building in which the edges of longitudinal (lengthwise-running) hull planks overlap each other. The technique originated in Northern Europe, with the first known examples using metal fastenings that join overlapped planks in . It was employed by the Anglo-Saxons, Frisians, and Scandinavians in the early middle ages, and later in the Basque shipbuilding region where the Newport medieval ship was built. It was also used in cogs, the other major ship construction type found in Northern Europe in the latter part of the medieval period. UNESCO named the Nordic clinker boat tradition to its List of Intangible Cultural Heritage on December 14, 2021, in the first approval of a joint Nordic application. Description Clinker construction is a boat and ship-building method in which the hull planks overlap and are joined by nails that are driven through the overlap (often called the "lap"). These fastenings typically go ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Extrusion
Extrusion is a process used to create objects of a fixed cross section (geometry), cross-sectional profile by pushing material through a Die (manufacturing), die of the desired cross-section. Its two main advantages over other manufacturing processes are its ability to create very complex cross-sections; and to work materials that are brittle, because the material encounters only compressive stress, compressive and shear stress, shear stresses. It also creates excellent surface finish and gives considerable freedom of form in the design process. Drawing (manufacturing), Drawing is a similar process, using the tensile strength of the material to pull it through the die. It limits the amount of change that can be performed in one step, so it is limited to simpler shapes, and multiple stages are usually needed. Drawing is the main way to produce wire. Metal Bar stock, bars and tube (fluid conveyance), tubes are also often drawn. Extrusion may be continuous (theoretically producin ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rigid-hulled Inflatable Boat
A rigid inflatable boat (RIB), also rigid-hull inflatable boat or rigid-hulled inflatable boat (RHIB), is a lightweight but high-performance and high-capacity boat constructed with a rigid hull (watercraft), hull bottom joined to side-forming air tubes that are inflated with air to high pressure to give the sides resilient rigidity along the boat's topsides. The design is stable, light, fast and seaworthy. The inflated collar acts as a life jacket, ensuring that the vessel retains its buoyancy, even if the boat is taking on water. The RIB is an evolutionary development of the inflatable boat with a rubberized fabric bottom that is stiffened with flat boards within the collar to form the deck or floor of the boat. History Origins in Wales The concept of configuring a rigid hull surrounded by an inflated, compartmentalized buoyancy tube from prow to transom originated and evolved from the problems that plagued existing rubberized fabric bottom inflated motorboats: fabric wear-th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Dinghy
A dinghy is a type of small boat, often carried or Towing, towed by a Watercraft, larger vessel for use as a Ship's tender, tender. Utility dinghies are usually rowboats or have an outboard motor. Some are rigged for sailing but they differ from Dinghy sailing, sailing dinghies, which are designed first and foremost for sailing. A dinghy's main use is for transfers from larger boats, especially when the larger boat cannot Dock (maritime), dock at a suitably-sized port or marina. The term "dinghy towing" sometimes is used to refer to the practice of towing a car or other smaller vehicle behind a motorhome, by analogy to towing a dinghy behind a yacht. Etymology The term is a loanword from the Bengali language, Bengali ', Urdu ', and Hindi '. Definition and basic description The term "dinghy" has some variability in its definition, but is generally a small open boat which may be powered by oars, sail or an outboard motor. Some individual examples have the option of being p ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Inflatable Boat
An inflatable boat is a lightweight boat constructed with its sides and Bow (watercraft), bow made of Inflatable, flexible tubes containing pressurised gas. For smaller boats, the floor and Hull (watercraft), hull are often flexible, while for boats longer than , the floor typically consists of three to five rigid plywood or aluminium sheets fixed between the tubes, but not joined rigidly together. Often the Transom (nautical), transom is rigid, providing a location and structure for mounting an outboard motor. Some inflatable boats can be disassembled and packed into a small volume, so that they can be easily stored and transported. The boat, when inflated, is kept rigid cross-ways by a foldable removable thwart. This feature makes these boats suitable for Lifeboat (shipboard), liferafts for larger boats or aircraft, and for travel or recreational purposes. History Early attempts There are ancient carved images of animal skins filled with air being used as one-man floats to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Boat Building
Boat building is the design and construction of boats (instead of the larger ships) — and their on-board systems. This includes at minimum the construction of a hull, with any necessary propulsion, mechanical, navigation, safety and other service systems as the craft requires. The boat building industry provides for the design, manufacturing, repair and modification of human-powered watercrafts, sailboats, motorboats, airboats and submersibles, and caters for various demands from recreational (e.g. launches, dinghies and yachts), commercial (e.g. tour boats, ferry boats and lighters), residential ( houseboats), to professional (e.g. fishing boats, tugboats, lifeboats and patrol boats). Construction materials and methods Wood Wood is the traditional boat building material used for hull and spar construction. It is buoyant, widely available and easily worked. It is a popular material for small boats (of e.g. length; such as dinghies and sailboats). Its abras ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Clinker (boat Building)
Clinker-built, also known as lapstrake-built, is a method of boat building in which the edges of longitudinal (lengthwise-running) hull planks overlap each other. The technique originated in Northern Europe, with the first known examples using metal fastenings that join overlapped planks in . It was employed by the Anglo-Saxons, Frisians, and Scandinavians in the early middle ages, and later in the Basque shipbuilding region where the Newport medieval ship was built. It was also used in cogs, the other major ship construction type found in Northern Europe in the latter part of the medieval period. UNESCO named the Nordic clinker boat tradition to its List of Intangible Cultural Heritage on December 14, 2021, in the first approval of a joint Nordic application. Description Clinker construction is a boat and ship-building method in which the hull planks overlap and are joined by nails that are driven through the overlap (often called the "lap"). These fastenings typically go ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
United States Government Publishing Office
The United States Government Publishing Office (USGPO or GPO), formerly the United States Government Printing Office, is an agency of the legislative branch of the United States federal government. The office produces and distributes information products and services for all three branches of the Federal Government, including U.S. passports for the Department of State as well as the official publications of the Supreme Court, the Congress, the Executive Office of the President, executive departments, and independent agencies. An act of Congress changed the office's name to its current form in 2014. History Establishment of the Government Printing Office The Government Printing Office was created by congressional joint resolution () on June 23, 1860. It began operations March 4, 1861, with 350 employees and reached a peak employment of 8,500 in 1972. The agency began transformation to computer technology in the 1980s; along with the gradual replacement of paper with el ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rivet
A rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylinder (geometry), cylindrical shaft with a head on one end. The end opposite the head is called the ''tail''. On installation, the deformed end is called the ''shop head'' or buck-tail. Because there is effectively a head on each end of an installed rivet, it can support Tension (physics), tension loads. However, it is much more capable of supporting Shear force, shear loads (loads perpendicular to the axis of the shaft). Fastenings used in traditional wooden boat building, such as copper nails and clinch bolts, work on the same principle as the rivet but were in use long before the term ''rivet'' was introduced and, where they are remembered, are usually classified among nails and bolts respectively. History Solid rivets are one of the oldest and most reliable types of fasteners, having been found in archeology, archaeological findings dating back to the Bronze Age. Rivet ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Butt Joint
A butt joint is a joinery, wood joint in which the end of a piece of material is simply placed (or “butted”) against another piece. The butt joint is the simplest joint. An unreinforced butt joint is also the weakest joint, as it provides a limited surface area for gluing and lacks any mechanical interlocking to resist external forces. Nonetheless, it generally provides sufficient strength in most cases, particularly when fasteners are used. Additional reinforcement through Tie (engineering), ties and plates is often used to improve the characteristics of butt-jointed structures. The joint is widely used in many applications due to its simplicity, notably in rough carpentry and construction. Methods There are several types of butt joint based on the orientation of the pieces being joined. These include the T-butt, end-to-end butt, Miter butt and edge-to-edge butt. The T-butt joint is a very simple joint to construct. Members are simply docked (cut off) at a right angle and ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
