HOME

TheInfoList



OR:

In
surface science Surface science is the study of physical and chemical phenomena that occur at the interface of two phases, including solid– liquid interfaces, solid– gas interfaces, solid–vacuum interfaces, and liquid– gas interfaces. It includes th ...
, surface free energy (also interfacial free energy or surface energy) quantifies the disruption of intermolecular bonds that occurs when a surface is created. In solid-state physics, surfaces must be intrinsically less energetically favorable than the bulk of the material (the atoms on the surface have more energy compared with the atoms in the bulk), otherwise there would be a driving force for surfaces to be created, removing the bulk of the material (see sublimation). The surface energy may therefore be defined as the excess energy at the surface of a material compared to the bulk, or it is the work required to build an area of a particular surface. Another way to view the surface energy is to relate it to the work required to cut a bulk sample, creating two surfaces. There is "excess energy" as a result of the now-incomplete, unrealized bonding at the two surfaces. Cutting a solid body into pieces disrupts its bonds and increases the surface area, and therefore increases surface energy. If the cutting is done reversibly, then conservation of energy means that the energy consumed by the cutting process will be equal to the energy inherent in the two new surfaces created. The unit surface energy of a material would therefore be half of its energy of cohesion, all other things being equal; in practice, this is true only for a surface freshly prepared in
vacuum A vacuum is a space devoid of matter. The word is derived from the Latin adjective ''vacuus'' for "vacant" or " void". An approximation to such vacuum is a region with a gaseous pressure much less than atmospheric pressure. Physicists often ...
. Surfaces often change their form away from the simple " cleaved bond" model just implied above. They are found to be highly dynamic regions, which readily rearrange or
react REACT or React may refer to: Science and technology * REACT (telescope), a telescope at Fenton Hill Observatory, New Mexico, US Computing * React (JavaScript library) , a JavaScript library for building user interfaces, from Facebook ** React Nat ...
, so that energy is often reduced by such processes as passivation or
adsorption Adsorption is the adhesion of atoms, ions or molecules from a gas, liquid or dissolved solid to a surface. This process creates a film of the ''adsorbate'' on the surface of the ''adsorbent''. This process differs from absorption, in which a ...
.


Determination of surface energy


Measuring the surface energy with contact angle measurements

The most common way to measure surface energy is through contact angle experiments. In this method, the contact angle of the surface is measured with several liquids, usually water and diiodomethane. Based on the contact angle results and knowing the
surface tension Surface tension is the tendency of liquid surfaces at rest to shrink into the minimum surface area possible. Surface tension is what allows objects with a higher density than water such as razor blades and insects (e.g. water striders) t ...
of the liquids, the surface energy can be calculated. In practice, this analysis is done automatically by a contact angle meter. There are several different models for calculating the surface energy based on the contact angle readings. The most commonly used method is OWRK which requires the use of two probe liquids and gives out as a result the total surface energy as well as divides it into polar and dispersive components. Contact angle method is the standard surface energy measurement method due to its simplicity, applicability to a wide range of surfaces and quickness. The measurement can be fully automated and is standardized.


Measuring the surface energy of a solid – other methods

The surface energy of a liquid may be measured by stretching a liquid membrane (which increases the surface area and hence the surface energy). In that case, in order to increase the surface area of a mass of liquid by an amount, , a quantity of work, , is needed (where is the surface energy density of the liquid). However, such a method cannot be used to measure the surface energy of a solid because stretching of a solid membrane induces elastic energy in the bulk in addition to increasing the surface energy. The surface energy of a solid is usually measured at high temperatures. At such temperatures the solid creeps and even though the surface area changes, the volume remains approximately constant. If is the surface energy density of a cylindrical rod of radius and length at high temperature and a constant uniaxial tension , then at equilibrium, the variation of the total
Helmholtz free energy In thermodynamics, the Helmholtz free energy (or Helmholtz energy) is a thermodynamic potential that measures the useful work obtainable from a closed thermodynamic system at a constant temperature (isothermal). The change in the Helmholtz en ...
vanishes and we have : \delta F = -P~\delta l + \gamma~\delta A = 0 \quad \implies \quad \gamma = P\frac where is the
Helmholtz free energy In thermodynamics, the Helmholtz free energy (or Helmholtz energy) is a thermodynamic potential that measures the useful work obtainable from a closed thermodynamic system at a constant temperature (isothermal). The change in the Helmholtz en ...
and is the surface area of the rod: : A = 2\pi r^2 + 2\pi r l \quad \implies \quad \delta A = 4\pi r\delta r + 2\pi l\delta r + 2\pi r\delta l Also, since the volume () of the rod remains constant, the variation () of the volume is zero, that is, : V = \pi r^2 l \text \quad \implies \quad \delta V = 2\pi r l \delta r + \pi r^2 \delta l = 0 \quad\implies\quad \delta r = -\frac\delta l ~. Therefore, the surface energy density can be expressed as : \gamma = \frac ~. The surface energy density of the solid can be computed by measuring , , and at equilibrium. This method is valid only if the solid is isotropic, meaning the surface energy is the same for all
crystallographic Crystallography is the experimental science of determining the arrangement of atoms in crystalline solids. Crystallography is a fundamental subject in the fields of materials science and solid-state physics (condensed matter physics). The wor ...
orientations. While this is only strictly true for
amorphous solid In condensed matter physics and materials science, an amorphous solid (or non-crystalline solid, glassy solid) is a solid that lacks the long-range order that is characteristic of a crystal. Etymology The term comes from the Greek ''a'' (" ...
s (
glass Glass is a non- crystalline, often transparent, amorphous solid that has widespread practical, technological, and decorative use in, for example, window panes, tableware, and optics. Glass is most often formed by rapid cooling (quenchin ...
) and liquids, isotropy is a good approximation for many other materials. In particular, if the sample is polygranular (most metals) or made by powder
sintering Clinker nodules produced by sintering Sintering or frittage is the process of compacting and forming a solid mass of material by pressure or heat without melting it to the point of liquefaction. Sintering happens as part of a manufacturing ...
(most ceramics) this is a good approximation. In the case of single-crystal materials, such as natural
gemstones A gemstone (also called a fine gem, jewel, precious stone, or semiprecious stone) is a piece of mineral crystal which, in cut and polished form, is used to make jewelry or other adornments. However, certain rocks (such as lapis lazuli, opal, a ...
, anisotropy in the surface energy leads to faceting. The shape of the crystal (assuming equilibrium growth conditions) is related to the surface energy by the
Wulff construction The Wulff construction is a method to determine the equilibrium shape of a droplet or crystal of fixed volume inside a separate phase (usually its saturated solution or vapor). Energy minimization arguments are used to show that certain crystal pl ...
. The surface energy of the facets can thus be found to within a scaling constant by measuring the relative sizes of the facets.


Calculating the surface energy of a deformed solid

In the deformation of solids, surface energy can be treated as the "energy required to create one unit of surface area", and is a function of the difference between the total energies of the system before and after the deformation: :\gamma = \frac \left(E_1 - E_0\right). Calculation of surface energy from first principles (for example, density functional theory) is an alternative approach to measurement. Surface energy is estimated from the following variables: width of the d-band, the number of valence d-electrons, and the coordination number of atoms at the surface and in the bulk of the solid.


Calculating the surface formation energy of a crystalline solid

In density functional theory, surface energy can be calculated from the following expression: :\gamma = \frac where : is the total energy of surface slab obtained using density functional theory. : is the number of atoms in the surface slab. : is the bulk energy per atom. : is the surface area. For a slab, we have two surfaces and they are of the same type, which is reflected by the number 2 in the denominator. To guarantee this, we need to create the slab carefully to make sure that the upper and lower surfaces are of the same type. Strength of adhesive contacts is determined by the work of adhesion which is also called ''relative surface energy'' of two contacting bodies. The relative surface energy can be determined by detaching of bodies of well defined shape made of one material from the substrate made from the second material. For example, the relative surface energy of the interface " acrylic glassgelatin" is equal to 0.03 N/m. Experimental setup for measuring relative surface energy and its function can be seen in the video.


Estimating surface energy from the heat of sublimation

To estimate the surface energy of a pure, uniform material, an individual region of the material can be modeled as a cube. In order to move a cube from the bulk of a material to the surface, energy is required. This energy cost is incorporated into the surface energy of the material, which is quantified by: :\gamma = \frac where and are coordination numbers corresponding to the surface and the bulk regions of the material, and are equal to 5 and 6, respectively; is the surface area of an individual molecule, and is the pairwise intermolecular energy. Surface area can be determined by squaring the cube root of the volume of the molecule: :a_0 = V_\text^\frac = \left(\frac\right)^\frac Here, corresponds to the molar mass of the molecule, corresponds to the density, and is the
Avogadro constant The Avogadro constant, commonly denoted or , is the proportionality factor that relates the number of constituent particles (usually molecules, atoms or ions) in a sample with the amount of substance in that sample. It is an SI defining ...
. In order to determine the pairwise intermolecular energy, all intermolecular forces in the material must be broken. This allows thorough investigation of the interactions that occur for single molecules. During sublimation of a substance, intermolecular forces between molecules are broken, resulting in a change in the material from solid to gas. For this reason, considering the enthalpy of sublimation can be useful in determining the pairwise intermolecular energy. Enthalpy of sublimation can be calculated by the following equation: :\Delta_\text H = -\fracW_\text N_\text z_b Using empirically tabulated values for enthalpy of sublimation, it is possible to determine the pairwise intermolecular energy. Incorporating this value into the surface energy equation allows for the surface energy to be estimated. The following equation can be used as a reasonable estimate for surface energy: :\gamma \approx \frac


Interfacial energy

The presence of an interface influences generally all thermodynamic parameters of a system. There are two models that are commonly used to demonstrate interfacial phenomena: the Gibbs ideal interface model and the Guggenheim model. In order to demonstrate the thermodynamics of an interfacial system using the Gibbs model, the system can be divided into three parts: two immiscible liquids with volumes and and an infinitesimally thin boundary layer known as the Gibbs dividing plane () separating these two volumes. The total volume of the system is: :V = V_ + V_ All extensive quantities of the system can be written as a sum of three components: bulk phase , bulk phase , and the interface . Some examples include internal energy , the number of molecules of the th substance , and the entropy . :\begin U &= U_\alpha + U_\beta + U_\sigma \\ N_i &= N_ + N_ + N_ \\ S &= S_\alpha + S_\beta + S_\sigma \end While these quantities can vary between each component, the sum within the system remains constant. At the interface, these values may deviate from those present within the bulk phases. The
concentration In chemistry, concentration is the abundance of a constituent divided by the total volume of a mixture. Several types of mathematical description can be distinguished: '' mass concentration'', '' molar concentration'', ''number concentration'', ...
of molecules present at the interface can be defined as: :N_ = N_i - c_V_\alpha - c_V_\beta where and represent the concentration of substance in bulk phase and , respectively. It is beneficial to define a new term interfacial excess which allows us to describe the number of molecules per unit area: :\Gamma_i = \frac


Wetting


Spreading parameter

Surface energy comes into play in wetting phenomena. To examine this, consider a drop of liquid on a solid substrate. If the surface energy of the substrate changes upon the addition of the drop, the substrate is said to be wetting. The spreading parameter can be used to mathematically determine this: :S = \gamma_\text - \gamma_\text - \gamma_ where is the spreading parameter, the surface energy of the substrate, the surface energy of the liquid, and the interfacial energy between the substrate and the liquid. If , the liquid partially wets the substrate. If , the liquid completely wets the substrate.


Contact angle

A way to experimentally determine wetting is to look at the contact angle (), which is the angle connecting the solid–liquid interface and the liquid–gas interface (as in the figure). : If , the liquid completely wets the substrate. : If , high wetting occurs. : If , low wetting occurs. : If , the liquid does not wet the substrate at all. The Young equation relates the contact angle to interfacial energy: :\gamma_\text = \gamma_\text + \gamma_\text\cos\theta where is the interfacial energy between the solid and gas phases, the interfacial energy between the substrate and the liquid, is the interfacial energy between the liquid and gas phases, and is the contact angle between the solid–liquid and the liquid–gas interface.


Wetting of high- and low-energy substrates

The energy of the bulk component of a solid substrate is determined by the types of interactions that hold the substrate together. High-energy substrates are held together by bonds, while low-energy substrates are held together by forces.
Covalent A covalent bond is a chemical bond that involves the sharing of electrons to form electron pairs between atoms. These electron pairs are known as shared pairs or bonding pairs. The stable balance of attractive and repulsive forces between atom ...
, ionic, and metallic bonds are much stronger than forces such as van der Waals and hydrogen bonding. High-energy substrates are more easily wetted than low-energy substrates. In addition, more complete wetting will occur if the substrate has a much higher surface energy than the liquid.


Surface energy modification techniques

The most commonly used surface modification protocols are plasma activation, wet chemical treatment, including grafting, and thin-film coating. Surface energy mimicking is a technique that enables merging the device manufacturing and surface modifications, including patterning, into a single processing step using a single device material. Many techniques can be used to enhance wetting. Surface treatments, such as corona treatment, plasma treatment and
acid etching Acid etching may mean: *Glass etching, etching glass *Etching, acid etching of metal surfaces in printing *, acid etching in the production of circuit boards *Chemical milling Chemical milling or industrial etching is the subtractive manuf ...
, can be used to increase the surface energy of the substrate. Additives can also be added to the liquid to decrease its surface tension. This technique is employed often in paint formulations to ensure that they will be evenly spread on a surface.


The Kelvin equation

As a result of the surface tension inherent to liquids, curved surfaces are formed in order to minimize the area. This phenomenon arises from the energetic cost of forming a surface. As such the Gibbs free energy of the system is minimized when the surface is curved. The
Kelvin equation The Kelvin equation describes the change in vapour pressure due to a curved liquid–vapor interface, such as the surface of a droplet. The vapor pressure at a convex curved surface is higher than that at a flat surface. The Kelvin equation is de ...
is based on thermodynamic principles and is used to describe changes in vapor pressure caused by liquids with curved surfaces. The cause for this change in vapor pressure is the Laplace pressure. The vapor pressure of a drop is higher than that of a planar surface because the increased Laplace pressure causes the molecules to evaporate more easily. Conversely, in liquids surrounding a bubble, the pressure with respect to the inner part of the bubble is reduced, thus making it more difficult for molecules to evaporate. The Kelvin equation can be stated as: :RT \ln\frac = \gamma V_m \left(\frac + \frac\right) where is the
vapor pressure Vapor pressure (or vapour pressure in English-speaking countries other than the US; see spelling differences) or equilibrium vapor pressure is defined as the pressure exerted by a vapor in thermodynamic equilibrium with its condensed pha ...
of the curved surface, is the vapor pressure of the flat surface, is the
surface tension Surface tension is the tendency of liquid surfaces at rest to shrink into the minimum surface area possible. Surface tension is what allows objects with a higher density than water such as razor blades and insects (e.g. water striders) t ...
, is the molar volume of the liquid, is the universal gas constant, is
temperature Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer. Thermometers are calibrated in various temperature scales that historically have relied o ...
(in
kelvin The kelvin, symbol K, is the primary unit of temperature in the International System of Units (SI), used alongside its prefixed forms and the degree Celsius. It is named after the Belfast-born and University of Glasgow-based engineer and ...
), and and are the principal radii of curvature of the surface.


Surface modified pigments for coatings

Pigments offer great potential in modifying the application properties of a coating. Due to their fine particle size and inherently high surface energy, they often require a surface treatment in order to enhance their ease of dispersion in a liquid medium. A wide variety of surface treatments have been previously used, including the
adsorption Adsorption is the adhesion of atoms, ions or molecules from a gas, liquid or dissolved solid to a surface. This process creates a film of the ''adsorbate'' on the surface of the ''adsorbent''. This process differs from absorption, in which a ...
on the surface of a molecule in the presence of polar groups, monolayers of polymers, and layers of inorganic oxides on the surface of organic pigments. New surfaces are constantly being created as larger pigment particles get broken down into smaller subparticles. These newly-formed surfaces consequently contribute to larger surface energies, whereby the resulting particles often become cemented together into aggregates. Because particles dispersed in liquid media are in constant thermal or Brownian motion, they exhibit a strong affinity for other pigment particles nearby as they move through the medium and collide. This natural attraction is largely attributed to the powerful short-range
van der Waals force In molecular physics, the van der Waals force is a distance-dependent interaction between atoms or molecules. Unlike ionic or covalent bonds, these attractions do not result from a chemical electronic bond; they are comparatively weak and ...
s, as an effect of their surface energies. The chief purpose of pigment dispersion is to break down aggregates and form stable dispersions of optimally sized pigment particles. This process generally involves three distinct stages: wetting, deaggregation, and stabilization. A surface that is easy to wet is desirable when formulating a coating that requires good adhesion and appearance. This also minimizes the risks of surface tension related defects, such as crawling, cratering, and orange peel. This is an essential requirement for pigment dispersions; for wetting to be effective, the surface tension of the pigment's vehicle must be lower than the surface free energy of the pigment. This allows the vehicle to penetrate into the interstices of the pigment aggregates, thus ensuring complete wetting. Finally, the particles are subjected to a repulsive force in order to keep them separated from one another and lowers the likelihood of
flocculation Flocculation, in the field of chemistry, is a process by which colloidal particles come out of suspension to sediment under the form of floc or flake, either spontaneously or due to the addition of a clarifying agent. The action differs from ...
. Dispersions may become stable through two different phenomena: charge repulsion and steric or entropic repulsion. In charge repulsion, particles that possess the same like electrostatic charges repel each other. Alternatively,
steric Steric effects arise from the spatial arrangement of atoms. When atoms come close together there is a rise in the energy of the molecule. Steric effects are nonbonding interactions that influence the shape ( conformation) and reactivity of ions ...
or entropic repulsion is a phenomenon used to describe the repelling effect when adsorbed layers of material (such as polymer molecules swollen with solvent) are present on the surface of the pigment particles in dispersion. Only certain portions (anchors) of the polymer molecules are adsorbed, with their corresponding loops and tails extending out into the solution. As the particles approach each other their adsorbed layers become crowded; this provides an effective steric barrier that prevents
flocculation Flocculation, in the field of chemistry, is a process by which colloidal particles come out of suspension to sediment under the form of floc or flake, either spontaneously or due to the addition of a clarifying agent. The action differs from ...
. This crowding effect is accompanied by a decrease in entropy, whereby the number of conformations possible for the polymer molecules is reduced in the adsorbed layer. As a result, energy is increased and often gives rise to repulsive forces that aid in keeping the particles separated from each other.


Surface energies of common materials


See also

* Contact angle *
Surface tension Surface tension is the tendency of liquid surfaces at rest to shrink into the minimum surface area possible. Surface tension is what allows objects with a higher density than water such as razor blades and insects (e.g. water striders) t ...
*
Sessile drop technique image:Contact angle.svg, 400px, Fig 1: An illustration of the sessile drop technique with a liquid droplet partially wetting a solid substrate. is the contact angle, and represent the solid–gas, gas–liquid, and liquid–solid interfaces, res ...
* Capillary surface *
Wulff Construction The Wulff construction is a method to determine the equilibrium shape of a droplet or crystal of fixed volume inside a separate phase (usually its saturated solution or vapor). Energy minimization arguments are used to show that certain crystal pl ...


References


External links


What is surface free energy?

Surface Energy and Adhesion
{{DEFAULTSORT:Surface Energy Forms of energy Condensed matter physics Surface science