Tangent half-angle substitution

In integral calculus, the tangent half-angle substitution is a change of variables used for evaluating integrals, which converts a rational function of trigonometric functions of $x$ into an ordinary rational function of $t$ by setting $t = \tan \tfrac x2$. This is the one-dimensional stereographic projection of the unit circle parametrized by angle measure onto the real line. The general transformation formula is:

$\int f(\sin x, \cos x)\, dx =\int f \frac.$

The tangent of half an angle is important in spherical trigonometry and was sometimes known in the 17th century as the half tangent or semi-tangent. Leonhard Euler used it to evaluate the integral $\int dx / (a + b\cos x)$ in his 1768 integral calculus textbook, and Adrien-Marie Legendre described the general method in 1817.

The substitution is described in most integral calculus textbooks since the late 19th century, usually without any special name. It is known in Russia as the universal trigonometric substitution, and also known by variant names such as ''half-tangent substitution'' or ''half-angle substitution''. It is sometimes misattributed as the Weierstrass substitution. Michael Spivak called it the "world's sneakiest substitution".

The substitution

Introducing a new variable $t=\tan\tfrac x2,$ sines and cosines can be expressed as rational functions of $t,$ and $dx$ can be expressed as the product of $dt$ and a rational function of $t,$ as follows:
$\sin x = \frac, \qquad \cos x = \frac, \qquad \text \qquad dx = \frac\,dt.$

Derivation

Using the double-angle formulas, introducing denominators equal to one thanks to the Pythagorean theorem, and then dividing numerators and denominators by $\cos^2\tfrac x2,$ one gets

\begin
\sin x &= \frac = \frac = \frac, \\ 8mu\cos x &= \frac = \frac = \frac.\end

Finally, since $t = \tan \tfrac x2$, differentiation rules imply

:$dt = \tfrac12\left(1+\tan^2 \tfrac x2\right) dx = \frac2 dx,$
and thus
:$dx=\fracdt.$

Examples

Antiderivative of cosecant

\begin
\int\csc x\,dx&=\int\frac \\ pt&=\int \left(\frac\right) \left(\frac\right)dt && t = \tan\tfrac x2 \\ pt&=\int\frac \\ pt&=\ln , t , + C \\ pt&=\ln \left, \tan\tfrac x2 \ + C.
\end

We can confirm the above result using a standard method of evaluating the cosecant integral by multiplying the numerator and denominator by $\csc x - \cot x$ and performing the substitution $u = \csc x - \cot x,$ $du = \left(-\csc x \cot x + \csc^2 x\right)\,dx$.

\begin
\int \csc x \,dx &= \int \frac \, dx \\ pt&= \int \frac \qquad u = \csc x - \cot x \\ pt&= \int \frac \\
&= \ln , u, + C \\ pt&= \ln, \csc x - \cot x, + C.
\end

These two answers are the same because $\csc x - \cot x = \tan \tfrac x2\colon$

\begin
\csc x - \cot x
&= \frac - \frac \\ pt&= \frac - \frac\frac \qquad\qquad t = \tan \tfrac x2 \\ pt&= \frac = t \\ pt&= \tan \tfrac x2
\end

The secant integral may be evaluated in a similar manner.

A definite integral

\begin
\int_0^\frac
&= \int_0^\pi \frac + \int_\pi^ \frac \\ pt&=\int_0^\infty \frac + \int_^0 \frac & t &= \tan\tfrac x2 \\ pt&=\int_^\infty \frac \\ pt&=\frac\int_^\infty \frac & t &= u\sqrt 3 \\ pt&=\frac.
\end

In the first line, one cannot simply substitute $t=0$ for both limits of integration. The singularity (in this case, a vertical asymptote) of $t=\tan\tfrac x2$ at $x=\pi$ must be taken into account. Alternatively, first evaluate the indefinite integral, then apply the boundary values.
\begin
\int \frac &= \int \frac \frac && t = \tan\tfrac x2 \\ pt&= \int \frac = \int \frac\\ pt&= \frac \int \frac && u = t \big/ \sqrt 3\\ pt&= \frac \int \frac && \tan \theta = u \\ pt&= \frac \int \cos^2 \theta \sec^2 \theta \,d\theta = \frac \int d\theta\\ pt&= \frac \theta + C = \frac \arctan \left( \frac\right) + C\\ pt&= \frac \arctan \left( \frac\right) + C.
\end
By symmetry,
\begin
\int_^ \frac &= 2 \int_^ \frac = \lim_ \frac \arctan \left( \frac\right) \Biggl, _^\\ pt&= \frac \Biggl \lim_ \arctan \left(\frac\right) - \arctan (0) \Biggl= \frac \left( \frac - 0\right) = \frac,
\end
which is the same as the previous answer.

Third example: both sine and cosine

\begin \int \frac &= \int \frac \\ pt&= \int \frac \\ pt&= \frac \arctan \left(\frac\right) + C
\end
if $c^2-(a^2+b^2)>0.$

Geometry

As ''x'' varies, the point (cos ''x'', sin ''x'') winds repeatedly around the unit circle centered at (0, 0). The point

$\left(\frac, \frac\right)$

goes only once around the circle as ''t'' goes from −∞ to +∞, and never reaches the point (−1, 0), which is approached as a limit as ''t'' approaches ±∞. As ''t'' goes from −∞ to −1, the point determined by ''t'' goes through the part of the circle in the third quadrant, from (−1, 0) to (0, −1). As ''t'' goes from −1 to 0, the point follows the part of the circle in the fourth quadrant from (0, −1) to (1, 0). As ''t'' goes from 0 to 1, the point follows the part of the circle in the first quadrant from (1, 0) to (0, 1). Finally, as ''t'' goes from 1 to +∞, the point follows the part of the circle in the second quadrant from (0, 1) to (−1, 0).

Here is another geometric point of view. Draw the unit circle, and let ''P'' be the point . A line through ''P'' (except the vertical line) is determined by its slope. Furthermore, each of the lines (except the vertical line) intersects the unit circle in exactly two points, one of which is ''P''. This determines a function from points on the unit circle to slopes. The trigonometric functions determine a function from angles to points on the unit circle, and by combining these two functions we have a function from angles to slopes.

Gallery

File:Weierstrass substitution.svg, (1/2) The tangent half-angle substitution relates an angle to the slope of a line.
File:WeierstrassSubstitution.svg, (2/2) The tangent half-angle substitution illustrated as stereographic projection of the circle.

Hyperbolic functions

As with other properties shared between the trigonometric functions and the hyperbolic functions, it is possible to use hyperbolic identities to construct a similar form of the substitution, $t = \tanh \tfrac x2$:

\begin
&\sinh x = \frac, \qquad \cosh x = \frac, \qquad \tanh x = \frac, \\ pt&\coth x = \frac, \qquad \operatorname x = \frac, \qquad \operatorname x = \frac, \\ pt&\text \qquad dx = \frac\,dt.
\end

Geometrically, this change of variables is a one-dimensional analog of the Poincaré disk projection.

See also

*Rational curve
*Stereographic projection
*Tangent half-angle formula
*Trigonometric substitution
*Euler substitution

Further reading

*

*

* Second edition 1916
pp. 52–62

*

Notes and references

External links

Weierstrass substitution formulas
at PlanetMath
{{Integrals
Integral calculus