Index of construction articles
   HOME

TheInfoList



OR:

This page is a list of construction topics.


A

Abated :''See also, Abatement.'' Abated, an ancient technical term applied in masonry and metal A metal (from Greek μέταλλον ''métallon'', "mine, quarry, metal") is a material that, when freshly prepared, polished, or fractured, shows a ...
-
Abrasive blasting Sandblasting, sometimes known as abrasive blasting, is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface or remove su ...
-
AC power plugs and sockets AC power plugs and sockets connect electric equipment to the alternating current (AC) mains electricity power supply in buildings and at other sites. Electrical plugs and sockets differ from one another in voltage and current rating, shape, si ...
- Access mat -
Accrington brick Accrington bricks, or Nori, are a type of iron-hard engineering brick, produced in Altham near Accrington, Lancashire, England from 1887 to 2008 and again from 2015. They were famed for their strength, and were used for the foundations of the Bl ...
-
Accropode Accropode blocks are wave-dissipating concrete blocks designed to resist the action of waves on breakwaters and coastal structures. History The Accropode is a single-layer artificial armour unit developed by Sogreah in 1981. Accropode concre ...
-
Acid brick Acid brick or acid resistant brick is a specially made form of masonry brick that is chemically resistant and thermally durable.
-
Acoustic plaster Acoustic plaster is plaster which contains fibres or aggregate so that it absorbs sound. Early plasters contained asbestos, but newer ones consist of a base layer of absorptive substrate panels, which are typically mineral wool, or a non-combustib ...
-
Active daylighting Daylighting is the practice of placing windows, skylights, other openings, and reflective surfaces so that sunlight (direct or indirect) can provide effective internal lighting. Particular attention is given to daylighting while designing a b ...
-
Adaptive reuse Adaptive reuse refers to the process of reusing an existing building for a purpose other than which it was originally built or designed for. It is also known as recycling and conversion. Adaptive reuse is an effective strategy for optimizing the o ...
-
Aerial crane An aerial crane or flying crane is a helicopter used to lift heavy or awkward loads. As aerial cranes, helicopters carry loads connected to long cables or slings in order to place heavy equipment when other methods are not available or economically ...
-
Aerosol paint Aerosol paint (commonly spray paint) is paint that comes in a sealed, pressurized container and is released in an aerosol spray when a valve button is depressed. Aerosol painting is one form of spray painting; it leaves a smooth, even coat, unlike ...
-
Aggregate base Aggregate base is a construction aggregate typically composed of crushed rock capable of passing through a rock screen. The component particles will vary in size from 20 mm down to dust. The material can be made of virgin (newly mined) rock ...
-
Agile construction Agile construction is an integrated system of principles and methods, and a philosophy of doing business adapted to jobsites and overall project delivery in the construction industry. It is born from agile manufacturing and project management, whic ...
-
Akmon An akmon is a multi-ton concrete block used for breakwater and seawall armouring. It was originally designed in the Netherlands in the 1960s, as an improvement on the tetrapod Tetrapods (; ) are four-limbed vertebrate animals constituting the ...
-
Alternative natural materials Alternative natural materials are natural materials like Rock (geology), rock or adobe that are not as commonly in use as materials such as wood or iron. Alternative natural materials have many practical uses in areas such as sustainable architectu ...
-
Anchorage in reinforced concrete Reinforced concrete Cis concrete in which reinforcement bars ("rebars"), reinforcement grids, plates or fibers are embedded to create bond and thus to strengthen the concrete in tension. The composite material was invented by French gardener Josep ...
-
Angle grinder An angle grinder, also known as a side grinder or disc grinder, is a handheld power tool used for grinding (abrasive cutting) and polishing. Although developed originally as tools for rigid abrasive discs, the availability of an interchangeable ...
-
Arc welding Arc welding is a welding process that is used to join metal to metal by using electricity to create enough heat to melt metal, and the melted metals, when cool, result in a binding of the metals. It is a type of welding that uses a welding powe ...
-
Artificial stone Artificial stone is a name for various synthetic stone products produced from the 18th century onward. Uses include statuary, architectural details, fencing and rails, building construction, civil engineering work, and industrial applications su ...
-
Asbestos cement Asbestos cement, genericized as fibro, fibrolite (short for "fibrous (or fibre) cement sheet") or AC sheet, is a building material in which asbestos fibres are used to reinforce thin rigid cement sheets. Although invented at the end of the 19 ...
-
Asbestos insulating board Asbestos insulating board (AIB), also known by the trade names Asbestolux and Turnabestos, is an asbestos-containing board formerly used in construction for its fire resistance and insulating properties. These boards were commonly used in the U ...
-
Asbestos shingle Asbestos shingles are roof or wall shingles made with asbestos cement board. They often resemble slate shingles and were mass-produced during the 20th century as these were more resilient to weathering than traditional slate shingles for the ...
-
Asphalt concrete Asphalt concrete (commonly called asphalt, blacktop, or pavement in North America, and tarmac, bitumen macadam, or rolled asphalt in the United Kingdom and the Republic of Ireland) is a composite material commonly used to surface roads, parkin ...
-
Asphalt roll roofing Asphalt roll roofing or membrane is a roofing material commonly used for buildings that feature a low sloped roof pitch in North America. The material is based on the same materials used in asphalt shingles; an organic felt or fiberglass mat, sat ...
-
Autoclaved aerated concrete Autoclaved aerated concrete (AAC) is a lightweight, precast, foam concrete building material suitable for producing concrete masonry unit like blocks. Composed of quartz sand (SiO2 with impurities), calcined calcium sulfate (CaSO4, a.k.a ...
-
Autonomous building An autonomous building is a building designed to be operated independently from infrastructural support services such as the electric power grid, gas grid, municipal water systems, sewage treatment systems, storm drains, communication services, ...
-
Azulejo ''Azulejo'' (, ; from the Arabic ''al- zillīj'', ) is a form of Spanish and Portuguese painted tin-glazed ceramic tilework. ''Azulejos'' are found on the interior and exterior of churches, palaces, ordinary houses, schools, and nowadays, resta ...
-
Australian Construction Contracts Australian Construction Contracts govern how the parties to a construction contract behave and how the project manager and the contract manager administer the relationship between the parties. There are several popular standard forms of construction ...
-
Axe An axe ( sometimes ax in American English; see spelling differences) is an implement that has been used for millennia to shape, split and cut wood, to harvest timber, as a weapon, and as a ceremonial or heraldic symbol. The axe has many for ...


B

Backhoe A backhoe—also called rear actor or back actor—is a type of excavating equipment, or digger, consisting of a digging bucket on the end of a two-part articulated arm. It is typically mounted on the back of a tractor or front loader, the latt ...
-
Balloon framing Framing, in construction, is the fitting together of pieces to give a structure support and shape. Framing materials are usually wood, engineered wood, or structural steel. The alternative to framed construction is generally called ''mass wal ...
-
Bamboo construction Bamboo can be utilized as a building material for scaffolding, bridges, houses and buildings. Bamboo, like wood, is a natural composite material with a high strength-to-weight ratio useful for structures. Bamboo's strength-to-weight ratio is simi ...
-
Bamboo-mud wall Bamboo-mud wall (編竹夾泥牆, also known as Bamboo-net clay wall, Taiwanese wattle, and daub) is a composite wall construction method largely used in Taiwan under Japanese rule in the early 20th century. Derived from Japanese wattle and daub ...
-
Bandsaw A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumb ...
-
Banksman In Irish and British civil engineering, a banksman is the person who directs the operation of a crane or larger vehicle from the point near where loads are attached and detached. The term 'dogman' may be used in Australia and New Zealand, while 's ...
-
Barrel roof A barrel roof is a curved roof that, especially from below, is curved like a cut-away barrel. They have some advantages over dome roofs, especially being able to cover rectangular buildings, due to their uniform cross-section. Barrel vaults a ...
-
Baseboard In architecture, a baseboard (also called skirting board, skirting, wainscoting, mopboard, trim, floor molding, or base molding) is usually wooden or vinyl board covering the lowest part of an interior wall. Its purpose is to cover the joint b ...
-
Basement waterproofing Basement waterproofing involves techniques and materials used to prevent water from penetrating the basement of a house or a building. Waterproofing a basement that is below ground level can require the application of sealant materials, the instal ...
-
Batten A batten is most commonly a strip of solid material, historically wood but can also be of plastic, metal, or fiberglass. Battens are variously used in construction, sailing, and other fields. In the lighting industry, battens refer to linea ...
- Batter board -
Belt sander A belt sander or strip sander is a sander used in shaping and finishing wood and other materials. It consists of an electric motor that turns a pair of drums on which a continuous loop of sandpaper is mounted. Belt sanders may be handheld and mo ...
-
Bill of quantities A bill of quantities is a document used in tendering in the construction industry in which materials, parts, and labor (and their costs) are itemized. It also (ideally) details the terms and conditions of the construction or repair contract and item ...
-
Bioasphalt Bioasphalt is an Asphalt concrete, asphalt alternative made from non-petroleum based renewable resources. These sources include sugar, wikt:molasses, molasses and rice, maize, corn and potato starches, natural tree and gum resins, natural latex rub ...
-
Biocidal natural building material A biocidal natural building material is a natural building material which has biocidal properties. The biocidal properties of biocidal natural building materials are inherent to the material, rather than being supplemented afterwards. This makes ...
-
Bituminous waterproofing Bituminous waterproofing systems are designed to protect residential and commercial buildings. Bitumen (asphalt or coal-tar pitch) is a mixed substance made up of organic liquids that are highly sticky, viscous, and waterproof. These systems are ...
-
Block paving Block paving, also known as brick paving, is a commonly used decorative method of creating a pavement or hardstanding. The main benefit of bricks over other materials is that individual bricks can later be lifted up and replaced. This allows for r ...
-
Blowtorch A blowtorch, also referred to as a blowlamp, is an ambient air fuel-burning gas lamp used for applying flame and heat to various applications, usually metalworking. Early blowtorches used liquid fuel, carried in a refillable reservoir attache ...
-
Board roof A board roof or boarded roof is a roofing method of using boards as the weather barrier on a roof. Board roofs can be applied in several ways, the basic types have the boards installed vertically and installed horizontally. ''Double board roofs'' ...
-
Bochka roof A bochka roof or simply bochka (russian: бочка, barrel) is a type of roof in traditional Russian church architecture that has the form of a half-cylinder with an elevated and pointed upper part, resembling a pointed kokoshnik. In English the ...
-
Bond beam A bond beam is a horizontal structural element, usually found as an embedded part of a masonry wall assembly. The bond beam serves to impart horizontal strength to a wall where it may not otherwise be braced by floor or roof structure. Bond beams e ...
-
Boulder wall A boulder wall, also spelled boulder-walls or bowlder-wall, is a kind of wall built of round flints and pebbles, laid in a strong mortar. It is used where the sea has a beach cast up, or where there are plenty of flints. References See als ...
- Bowen Construction -
Box crib A box crib or cribbing is a temporary wooden structure used to support heavy objects during construction, relocation, vehicle extrication and urban search and rescue. It is commonly used to secure overturned motor vehicles, and debris within co ...
-
Breaker Breaker may refer to: Objects * A breaking wave on water, or a "breaker", a shallow over which waves break * Circuit breaker, an electrical overload switch * Breaker (hydraulic), a percussion hammer attached to an excavator People * Breaker Mor ...
-
Brettstapel Brettstapel, also known as dowellam, is a massive timber construction system, fabricated exclusively from softwood timber posts connected with hardwood timber dowels. It is a relatively simple method of construction that exploits low grade timber ...
-
Brick A brick is a type of block used to build walls, pavements and other elements in masonry construction. Properly, the term ''brick'' denotes a block composed of dried clay, but is now also used informally to denote other chemically cured cons ...
-
Brick clamp :''"Brick clamp" also refers to a device (usually powered) to lift quantities of bricks.'' A brick clamp is a traditional method of baking bricks, done by stacking unbaked bricks with fuel under or among them, then igniting the fuel. The clamp ...
-
Brick hod A brick hod is a hemicube (geometry), three-sided box for carrying bricks or other building materials, often Mortar (masonry), mortar. It bears a long handle and is carried over the shoulder. A hod is usually long enough to accept 4 bricks on thei ...
-
Bricklayer A bricklayer, which is related to but different from a mason, is a craftsman and tradesman who lays bricks to construct brickwork. The terms also refer to personnel who use blocks to construct blockwork walls and other forms of masonry. ...
-
Brickwork Brickwork is masonry produced by a bricklayer, using bricks and mortar. Typically, rows of bricks called '' courses'' are laid on top of one another to build up a structure such as a brick wall. Bricks may be differentiated from blocks by s ...
-
Bughole A bughole (or pinhole) is a small hole in the surface of a concrete structure caused by the expansion and eventual outgassing Outgassing (sometimes called offgassing, particularly when in reference to indoor air quality) is the release of a gas t ...
-
Builder's risk insurance Builder's risk insurance (Contractor's All Risk insurance – CAR insurance) is a special type of property insurance which indemnifies against damage to buildings while they are under construction. Builder's risk insurance is "coverage that prot ...
-
Builders hardware Builders' hardware or just builders hardware is a group of metal hardware specifically used for protection, decoration, and convenience in buildings. Building products do not make any part of a building, rather they support them and make them work. ...
-
Builders' rites Builders' rites are ceremonies attendant on the laying of foundation stones, including ecclesiastical, masonic or other traditions connected with foundations or other aspects of construction. One such custom is that of placing a few coins, newspap ...
-
Building A building, or edifice, is an enclosed structure with a roof and walls standing more or less permanently in one place, such as a house or factory (although there's also portable buildings). Buildings come in a variety of sizes, shapes, and fun ...
-
Building automation Building automation (BAS), also known as building management system (BMS) or building energy management system (BEMS), is the automatic centralized control of a building's HVAC (heating, ventilation and air conditioning), electrical, lighting, ...
-
Building code A building code (also building control or building regulations) is a set of rules that specify the standards for constructed objects such as buildings and non-building structures. Buildings must conform to the code to obtain planning permission ...
-
Building construction Construction is a general term meaning the art and science to form objects, systems, or organizations,"Construction" def. 1.a. 1.b. and 1.c. ''Oxford English Dictionary'' Second Edition on CD-ROM (v. 4.0) Oxford University Press 2009 and com ...
-
Building control body A building control body is an organisation authorised to control building work that is subject to the Building Regulations in England and Wales (similar systems are provided in Northern Ireland, and in Scotland where the term 'building standards' ...
-
Building cooperative A building co-operative is a co-operative housing corporation where individuals or families work together to directly construct their own homes in a cooperative fashion. Members of this type of co-operative purchase building materials in bulk an ...
-
Building design Building design refers to the broadly based architectural, engineering and technical applications to the design of buildings. All building projects require the services of a building designer, typically a licensed architect. Smaller, less complica ...
- Building diagnostics -
Building engineer A building engineer is recognised as being expert in the use of technology for the design, construction, assessment and maintenance of the built environment. Commercial Building Engineers are concerned with the planning, design, construction, op ...
-
Building envelope A building envelope is the physical separator between the conditioned and unconditioned environment of a building including the resistance to air, water, heat, light, and noiseSyed, Asif. ''Advanced building technologies for sustainability''. Hoboke ...
-
Building estimator A building estimator or cost estimator is an individual that quantifies the materials, labor, and equipment needed to complete a construction project. Building cost estimating can concern diverse forms of construction from residential properties t ...
-
Building implosion In the controlled demolition industry, building implosion is the strategic placing of explosive material and timing of its detonation so that a structure collapses on itself in a matter of seconds, minimizing the physical damage to its immedi ...
-
Building information modeling Building information modeling (BIM) is a process supported by various tools, technologies and contracts involving the generation and management of digital representations of physical and functional characteristics of places. Building informatio ...
-
Building information modeling in green building Building information modeling, Building information modeling (BIM) in green buildings aims at enabling sustainable designs and in turn allows architects and engineers to integrate and analyze building performance. It quantifies the environmental i ...
-
Building insulation Building insulation is any object in a building used as insulation for thermal management. While the majority of insulation in buildings is for thermal purposes, the term also applies to acoustic insulation, fire insulation, and impact insul ...
-
Building insulation materials Building insulation materials are the building materials which form the thermal envelope of a building or otherwise reduce heat transfer. Insulation may be categorized by its composition (natural or synthetic materials), form (batts, blankets, loo ...
-
Building-integrated photovoltaics Building-integrated photovoltaics (BIPV) are photovoltaic materials that are used to replace conventional building materials in parts of the building envelope such as the roof, skylights, or facades. They are increasingly being incorporated in ...
- Building life cycle -
Building maintenance unit A building maintenance unit (BMU) is an automatic, remote-controlled, or mechanical device, usually suspended from the roof, which moves systematically over some surface of a structure while carrying human window washers or mechanical robots to m ...
-
Building material Building material is material used for construction. Many naturally occurring substances, such as clay, rock (geology), rocks, sand, wood, and even twigs and leaves, have been used to construct buildings. Apart from naturally occurring materia ...
-
Building officials Building officials of developed countries are generally the jurisdictional administrator of building and construction codes, engineering calculation supervision, permits, facilities management, and accepted construction procedures. Qualification ...
-
Building performance Building performance is an attribute of a building that expresses how well that building carries out its functions. It may also relate to the performance of the building construction process. Categories of building performance are quality (how well ...
-
Building performance simulation Building performance simulation (BPS) is the replication of aspects of building performance using a computer-based, mathematical model created on the basis of fundamental physical principles and sound engineering practice. The objective of buildin ...
-
Building regulations approval To comply with the Building Act 1984 and the subsequent statutory instruments known as the Building Regulations, Building regulations approval is required to construct certain structures in England and Wales. Construction projects falling into thi ...
-
Building regulations in the United Kingdom Building regulations in the United Kingdom are statutory instruments or statutory regulations that seek to ensure that the policies set out in the relevant legislation are carried out. Building regulations approval is required for most building wo ...
-
Building science Building science is the science and technology-driven collection of knowledge in order to provide better indoor environmental quality (IEQ), energy-efficient built environments, and occupant comfort and satisfaction. ''Building physics, architec ...
-
Building services engineering Building services engineering is a professional engineering discipline that strives to achieve a safe and comfortable indoor environment whilst minimizing the environmental impact of a building. Alternative titles are "building services engineerin ...
-
Building typology Building typology refers to the study and documentation of buildings according to their essential characteristics. In architectural discourse typological classification tends to focus on building function (use), building form, or architectural sty ...
-
Bull's eye level A bull's eye level is a type of spirit level that allows for the leveling of planes in two dimensions — both the 'pitch' and 'roll' in nautical terms. Standard tubular levels only consider one dimension. Bull's eye levels are used prim ...
-
Bulldozer A bulldozer or dozer (also called a crawler) is a large, motorized machine equipped with a metal blade to the front for pushing material: soil, sand, snow, rubble, or rock during construction work. It travels most commonly on continuous track ...
-
Bundwerk ''Bundwerk'' is a method of building with timber that was used especially in the 19th century in Austria, South Tyrol and Bavaria. After log construction and timber framing, ''bundwerk'' is one of the most widespread forms of timber building ...
-
Bush hammer A bush hammer, also known as an axe hammer, is a masonry tool used to texturize stone and concrete. The term is derived from the German word ''bosshammer'', where Old German ''bossen'' meant "to beat". Description and use Bush hammers exist in ...
-
Butterfly roof A butterfly roof (sometimes called a V roof) is a form of roof characterised by an inversion of a standard roof form, with two roof surfaces sloping down from opposing edges to a valley near the middle of the roof.Calcium aluminate cements Calcium aluminate cements are cements consisting predominantly of hydraulic calcium aluminates. Alternative names are "aluminous cement", "high-alumina cement" and "Ciment fondu" in French. They are used in a number of small-scale, specialized ap ...
-
Camber beam In building, a camber beam is a piece of timber cut archwise, and steel bent or rolled, with an obtuse angle in the middle, commonly used in platforms as church leads, and other occasions where long and strong beams are required. The camber curve ...
-
Carpenter's axe Carpenter's axes or Carpenter's hatchets are small axes, usually slightly larger than a hatchet, used in traditional woodwork, joinery and log-building. They have pronounced beards and finger notches to allow a "choked" grip for precise control. ...
-
Carpentry Carpentry is a skilled trade and a craft in which the primary work performed is the cutting, shaping and installation of building materials during the construction of buildings, ships, timber bridges, concrete formwork, etc. Carpenters tr ...
-
Cast in place concrete Cast-in-place concrete or Cast-in-situ concrete is a technology of construction of buildings where walls and slabs of the buildings are cast at the site in formwork. This differs from precast concrete technology where slabs are cast elsewhere a ...
-
Cast stone Cast stone or reconstructed stone is a highly refined building material, a form of precast concrete used as masonry intended to simulate natural-cut stone. It is used for architectural features: trim, or ornament; facing buildings or other st ...
-
Caulk Caulk or, less frequently, caulking is a material used to seal joints or seams against leakage in various structures and piping. The oldest form of caulk consisted of fibrous materials driven into the wedge-shaped seams between boards on w ...
-
Cavity wall insulation A cavity wall is a type of wall that has a hollow center. They can be described as consisting of two "skins" separated by a hollow space (cavity). The skins typically are masonry, such as brick or cinder block. Masonry is an absorbent material ...
-
Cellulose insulation Cellulose insulation is plant fiber used in wall and roof cavities to insulate, draught proof and reduce noise. Building insulation in general is low- thermal-conductivity material used to reduce building heat loss and gain and reduce noise tr ...
-
Cement A cement is a binder, a chemical substance used for construction that sets, hardens, and adheres to other materials to bind them together. Cement is seldom used on its own, but rather to bind sand and gravel ( aggregate) together. Cement mix ...
-
Cement board A cement board is a combination of cement and reinforcing fibers formed into sheets, of varying thickness that are typically used as a tile backing board. Cement board can be nailed or screwed to wood or steel studs to create a substrate for ver ...
-
Cement-bonded wood fiber Cement-bonded wood fiber is a composite material manufactured throughout the world. It is made from wood (usually waste wood), chipped into a specially graded aggregate that is then mineralized and combined with Portland cement. Uses Cement- ...
-
Cement clinker 200px, Typical clinker nodules 200px, Hot clinker Cement clinker is a solid material produced in the manufacture of Portland cement as an intermediary product. Clinker occurs as lumps or nodules, usually to in diameter. It is produced by sinte ...
-
Cement kiln Cement kilns are used for the pyroprocessing stage of manufacture of portland and other types of hydraulic cement, in which calcium carbonate reacts with silica-bearing minerals to form a mixture of calcium silicates. Over a billion tonnes of ...
-
Cement mill A cement mill (or finish mill in North American usage) is the equipment used to grind the hard, nodular clinker from the cement kiln into the fine grey powder that is cement. Most cement is currently ground in ball mills and also vertical rolle ...
-
Cement render Cement render or cement plaster is the application of a mortar mix of sand and cement, (optionally lime) and water to brick, concrete, stone, or mud brick. It is often textured, colored, or painted after application. It is generally used on ...
-
Cement tile Cement tiles or hydraulic tiles are handmade colourful tiles used as floor and wall tiling. They appeared in Catalonia (Spain) in the 1850s, and have been widely used in Europe and America. Another origin is from Viviers, in the south of France, l ...
-
Cementing equipment Oil Well Cementing Equipment are essential for the Oil/Gas exploration or production wells and are must used oilfield equipments while drilling a well. Casing pipe will be installed at various depths while drilling. It is held in place by ceme ...
- Cementitious foam insulation -
Cenocell Cenocell is a patented concrete-like structural material that is manufactured without the addition of Portland cement. It was invented by Mulalo Doyoyo at the Georgia Institute of Technology. Cenocell is produced from a chemical reaction involv ...
-
Central heating A central heating system provides warmth to a number of spaces within a building from one main source of heat. It is a component of heating, ventilation, and air conditioning (short: HVAC) systems, which can both cool and warm interior spaces. ...
-
Centring Centring, centre, centering"Centering 2, Centring 2" def. 1. Whitney, William Dwight, and Benjamin E. Smith. ''The Century dictionary and cyclopedia''. vol. 2. New York: Century Co., 1901. p. 885., or center is a type of formwork: the temporary str ...
-
Ceramic building material Ceramic building material, often abbreviated to CBM, is an umbrella term used in archaeology to cover all building materials made from baked clay. It is particularly, but not exclusively, used in relation to Ancient Rome, Roman building materials. ...
-
Ceramic tile cutter Ceramic tile cutters are used to cut tiles to a required size or shape. They come in a number of different forms, from basic manual devices to complex attachments for power tools. Hand tools Beam score cutters, cutter boards The ceramic tile cutt ...
- Chaska brick -
Chief Construction Adviser to UK Government The role of Chief Construction Adviser is a British civil service appointment. It was created by United Kingdom ministers in 2009 to provide cross-departmental coordination and leadership on UK construction industry policy, and discontinued in 2015. ...
-
Chimney A chimney is an architectural ventilation structure made of masonry, clay or metal that isolates hot toxic exhaust gases or smoke produced by a boiler, stove, furnace, incinerator, or fireplace from human living areas. Chimneys are typic ...
-
Circular saw A circular saw is a power-saw using a toothed or abrasive disc or blade to cut different materials using a rotary motion spinning around an arbor. A hole saw and ring saw also use a rotary motion but are different from a circular saw. ''Cir ...
-
Civil engineer A civil engineer is a person who practices civil engineering – the application of planning, designing, constructing, maintaining, and operating infrastructure while protecting the public and environmental health, as well as improving existing ...
-
Civil engineering Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including public works such as roads, bridges, canals, dams, airports, sewage ...
-
Civil estimator A Civil estimator is a construction professional who bids on civil projects that have gone to tender. Civil estimators typically have a background in civil engineering Civil engineering is a professional engineering discipline that deals with ...
-
Cladding (construction) Cladding is the application of one material over another to provide a skin or layer. In construction, cladding is used to provide a degree of thermal insulation and weather resistance, and to improve the appearance of buildings. Cladding can be m ...
-
Clerk of the Works A clerk of works or clerk of the works (CoW) is employed by an architect or a client on a construction site. The role is primarily to represent the interests of the client in regard to ensuring that the quality of both materials and workmanship are ...
-
Climate-adaptive building shell Climate-adaptive building shell (CABS) is a term in building engineering that describes the group of facades and roofs that interact with the variability in their environment in a dynamic way. Conventional structures have static building envelop ...
-
Climbing formwork Climbing formwork, also known as jumpform, is a special type formwork for vertical concrete structures that rises with the building process. While relatively complicated and costly, it can be an effective solution for buildings that are either ver ...
-
Clinker brick Clinker bricks are partially-vitrified bricks used in the construction of buildings. Clinker bricks are produced when wet clay bricks are exposed to excessive heat during the firing process, sintering the surface of the brick and forming a shin ...
-
Close studding Close studding is a form of timber work used in timber-framed buildings in which vertical timbers ( studs) are set close together, dividing the wall into narrow panels. Rather than being a structural feature, the primary aim of close studding is to ...
-
Coastal engineering Coastal engineering is a branch of civil engineering concerned with the specific demands posed by constructing at or near the coast, as well as the development of the coast itself. The hydrodynamic impact of especially waves, tides, storm surges ...
-
Coating A coating is a covering that is applied to the surface of an object, usually referred to as the Substrate (materials science), substrate. The purpose of applying the coating may be decorative, functional, or both. Coatings may be applied as liquid ...
-
Cold-formed steel Cold-formed steel (CFS) is the common term for steel products shaped by cold-working processes carried out near room temperature, such as rolling, pressing, stamping, bending, etc. Stock bars and sheets of cold-rolled steel (CRS) are common ...
-
Collar beam A collar beam or collar is a horizontal member between two rafters and is very common in domestic roof construction. Often a collar is structural but they may be used simply to frame a ceiling. A collar beam is often called a collar tie but this ...
-
Collyweston stone slate The Collyweston Slater pub in Collyweston with a Collyweston slate roof Collyweston stone slate is a traditional roofing material found in central England. It is not a proper slate but a limestone found in narrow beds. It is considerably heav ...
-
Compactor A compactor is a machine or mechanism used to reduce the size of material such as waste material or bio mass through compaction. A trash compactor is often used by a home or business to reduce the volume of trash it produces. A baler-wrapper comp ...
-
Complex Projects Contract The CIOB Complex Projects Contract 2013 was a form of construction and engineering contract, developed by the Chartered Institute of Building (CIOB). Its formal name was the 'Contract for Use with Complex Projects, First Edition 2013'. In November ...
-
Composite material A composite material (also called a composition material or shortened to composite, which is the common name) is a material which is produced from two or more constituent materials. These constituent materials have notably dissimilar chemical or ...
-
Composting toilet A composting toilet is a type of dry toilet that treats human waste by a biological process called composting. This process leads to the decomposition of organic matter and turns human waste into compost-like material. Composting is carried ou ...
-
Compressed earth block A compressed earth block (CEB), also known as a pressed earth block or a compressed soil block, is a building material made primarily from an appropriate mix of fairly dry inorganic subsoil, non-expansive clay, sand, and aggregate. Forming compre ...
-
Computer-aided design Computer-aided design (CAD) is the use of computers (or ) to aid in the creation, modification, analysis, or optimization of a design. This software is used to increase the productivity of the designer, improve the quality of design, improve c ...
-
Concrete Concrete is a composite material composed of fine and coarse aggregate bonded together with a fluid cement (cement paste) that hardens (cures) over time. Concrete is the second-most-used substance in the world after water, and is the most wi ...
-
Concrete degradation Concrete degradation may have many different causes. Concrete is mostly damaged by the corrosion of reinforcement bars due to the carbonatation of hardened cement paste or chloride attack under wet conditions. Chemical damages are caused by the ...
- Concrete densifier -
Concrete finisher A concrete finisher is a skilled tradesperson who works with concrete by placing, finishing, protecting and repairing concrete in engineering and construction projects. Concrete finishers are often responsible for setting the concrete forms, ensur ...
-
Concrete float A concrete float is a tool used to finish a concrete surface by making it smooth. A float is used after the surface has been made level using a screed. In addition to removing surface imperfections, floating will compact the concrete as preparatio ...
-
Concrete fracture analysis Fracture mechanics is the field of mechanics concerned with the study of the propagation of cracks in materials. It uses methods of analytical solid mechanics to calculate the driving force on a crack and those of experimental solid mechanics t ...
-
Concrete grinder A concrete grinder can come in many configurations, the most common being a hand-held angle grinder, but it may be a specialized tool for countertops or worktops. Angle grinders are small and mobile, and allow one to work on harder to reach areas ...
- Concrete hinge -
Concrete leveling In civil engineering, concrete leveling is a procedure that attempts to correct an uneven concrete surface by altering the foundation that the surface sits upon. It is a cheaper alternative to having replacement concrete poured and is commonly per ...
-
Concrete mixer A concrete mixer (often colloquially called a cement mixer) is a device that homogeneously combines cement, aggregate such as sand or gravel, and water to form concrete. A typical concrete mixer uses a revolving drum to mix the components. F ...
-
Concrete masonry unit A concrete masonry unit (CMU) is a standard-size rectangular block used in building construction. CMUs are some of the most versatile building products available because of the wide variety of appearances that can be achieved using them. Tho ...
-
Concrete moisture meter A concrete moisture meter is a type of moisture meter used by installers of flooring to measure the moisture levels of concrete. These meters have been used for decades to measure the moisture content in different materials and substances. Concre ...
-
Concrete plant A concrete plant, also known as a batch plant or batching plant or a concrete batching plant, is equipment that combines various ingredients to form concrete. Some of these inputs include water, air, admixtures, sand, aggregate (rocks, gravel ...
-
Concrete pump A concrete pump is a machine used for transferring liquid concrete by pumping. There are different types of concrete pumps. A common type of concrete pump for large scale construction projects is known as a boom concrete pump, because it uses a ...
-
Concrete recycling Concrete is a composite material composed of fine and coarse aggregate bonded together with a fluid cement (cement paste) that hardens (cures) over time. Concrete is the second-most-used substance in the world after water, and is the most wi ...
-
Concrete saw A concrete saw (also known as a consaw, road saw, cut-off saw, slab saw or quick cut) is a power tool used for cutting concrete, masonry, brick, asphalt, tile, and other solid materials. There are many types ranging from small hand-held saws, cho ...
-
Concrete sealer Concrete sealers are applied to concrete to protect it from surface damage, corrosion, and staining. They either block the pores in the concrete to reduce absorption of water and salts or form an impermeable layer which prevents such materials fro ...
-
Concrete ship Concrete ships are built of steel and ferrocement (reinforced concrete) instead of more traditional materials, such as steel or wood. The advantage of ferrocement construction is that materials are cheap and readily available, while the disadvantag ...
-
Concrete slab A concrete slab is a common structural element of modern buildings, consisting of a flat, horizontal surface made of cast concrete. Steel- reinforced slabs, typically between 100 and 500 mm thick, are most often used to construct floors and ...
-
Concrete slump test The concrete slump test measures the consistency of fresh concrete before it sets. It is performed to check the workability of freshly made concrete, and therefore the ease with which concrete flows. It can also be used as an indicator of an impr ...
-
Conical roof A conical roof or cone roof is a cone-shaped roof that is circular at its base and terminates in a point. Distribution Conical roofs are frequently found on top of towers in medieval town fortifications and castles, where they may either sit ...
-
Constructability Constructability (or buildability) is a concept that denotes ease of construction. It can be central to project management techniques to review construction processes from start to finish during pre-construction phase. Buildability assessment is e ...
-
Constructed wetland A constructed wetland is an artificial wetland to treat sewage, greywater, stormwater runoff or industrial wastewater. It may also be designed for land reclamation after mining, or as a mitigation step for natural areas lost to land development. ...
-
Constructing Excellence Constructing Excellence is a United Kingdom construction industry membership organisation created in 2003, the only such which draws its member organisations from across the industry supply chain, ranging from clients, through contractors and consu ...
-
Construction Construction is a general term meaning the art and science to form objects, systems, or organizations,"Construction" def. 1.a. 1.b. and 1.c. ''Oxford English Dictionary'' Second Edition on CD-ROM (v. 4.0) Oxford University Press 2009 and com ...
-
Construction Alliance The Construction Alliance is a United Kingdom construction organisation representing over 13,500 individual companies, mainly local and regional building firms, involved in the UK construction industry. The Alliance was founded by the Civil Enginee ...
-
Construction and renovation fires Fires are common in buildings under construction and renovation, and present particular difficulties to firefighters. During construction, buildings often do not have elements that would protect them from fire, such as walls and sprinkler system ...
-
Construction bidding Construction bidding is the process of submitting a proposal ( tender) to undertake, or manage the undertaking of a construction project. The process starts with a cost estimate from blueprints and material take offs. The tender is treated as an o ...
- Construction buyer -
Construction collaboration technology Construction collaboration technology refers to software applications used to enable effective sharing of project-related information between geographically dispersed members of a construction project team, often through use of a web-based software ...
-
Construction communication Construction communication, within an organizational context, is to convey an instruction to influence the actions/behaviors of others, or may involve an Exchange (organized market), exchange of, or request for information during a construction pro ...
-
Construction contract A construction contract is a mutual or legally binding agreement between two parties based on policies and conditions recorded in document form. The two parties involved are one or more property owners and one or more contractors. The owner, often ...
-
Construction delay Construction delays are situations where project events occur at a later time than expected due to causes related to the client, consultant, and contractor etc. In residential and light construction, construction delays are often the result of misco ...
- Construction engineering -
Construction equipment theft Construction equipment theft, is the criminal act of stealing or attempting to steal construction equipment, including all type of heavy equipments. Construction equipment theft has been recognized as a significant problem in the United States an ...
-
Construction estimating software Construction cost estimating software is computer software designed for contractors to estimate construction costs for a specific project. A cost estimator will typically use estimating software to estimate their bid price for a project, which wil ...
-
Construction foreman A construction foreman, construction forewoman, or construction foreperson is the worker or skilled tradesperson who is in charge of a construction crew. This role is generally assumed by a senior worker. Duties and functions Normally the forema ...
-
Construction industry of India The construction industry of India is an important indicator of the development as it creates investment opportunities across various related sectors. With a share of around 8.2%, the construction industry has contributed an estimated ₹670 ...
-
Construction industry of Iran The construction industry of Iran is divided into two main sections. The first is government infrastructure projects, which are central for the cement industry. The second is the housing industry. In recent years, the construction industry has b ...
-
Construction industry of Japan The construction industry of Japan is a large component of the Japanese economy in terms of economic output and employment. Its history is one that mirrors closely the overall economic path of the country, from establishment of the capital during t ...
- Construction industry of Romania -
Construction industry of the United Kingdom The construction industry of the United Kingdom is one of the major industry sectors in the UK economy, contributing about 6% of UK gross value added in 2019. In 2018, it was, by GVA, the sixth biggest construction sector in the world. Scale and ...
-
Construction law Construction law is a branch of law that deals with matters relating to building construction, engineering, and related fields. It is in essence an amalgam of contract law, commercial law, planning law, employment law and tort. Construction law cov ...
-
Constructionline Constructionline is a register for pre-qualified contractors and consultants used by the construction industry of the United Kingdom. The database contains details for over 46,000 suppliers and is accessed by more than 4,000 buyer organisations. Or ...
- Construction loan -
Construction management Construction management (CM) is a professional service that uses specialized, project management techniques and software to oversee the planning, design, construction and closeout of a project. The purpose of Construction management is to control ...
-
Construction paper Construction paper, also known as sugar paper, is coloured cardstock paper. The texture is slightly rough, and the surface is unfinished. Due to the source material, mainly wood pulp, small particles are visible on the paper's surface. It is used f ...
-
Construction partnering Construction partnering is a type of business partnering used in the architecture, engineering and construction industry. Partnering is intended to assist project teams with setting goals, resolving disputes and improving project outcomes. The con ...
- Construction Photography -
Construction Research and Innovation Strategy Panel The Construction Research and Innovation Strategy Panel (CRISP) was an initiative established in 1995 to identify and prioritise the research needs of the construction industry of the United Kingdom. It operated through a series of Task Groups, eac ...
-
Construction site safety Construction site safety is an aspect of construction-related activities concerned with protecting construction site workers and others from death, injury, disease or other health-related risks. Construction is an often hazardous, predominantly la ...
-
Construction trailer Construction trailers are mobile structures (trailers) used to accommodate temporary offices, dining facilities and storage of building materials during construction projects. Hook-ups Typically, trailers need to be equipped with telephone lines ...
-
Construction waste Construction waste or debris is any kind of debris from the construction process. Different government agencies have clear definitions. For example, the United States Environmental Protection Agency EPA defines construction and demolition materi ...
-
Construction worker A construction worker is a worker employed in the physical construction of the built environment and its infrastructure. Definition By some definitions, workers may be engaged in manual labour as unskilled or semi-skilled workers; they may be sk ...
-
Cool pavement Cool pavement is a road surface that uses additives to reflect solar radiation unlike conventional dark pavement. Conventional dark pavements contribute to urban heat islands as they absorb 80–95% of sunlight and warm the local air. Cool pavemen ...
-
Copper cladding There are four main techniques used today in the UK and mainland Europe for copper cladding a building: * seamed-cladding (typically 0.7mm thick copper sheet on the facade): max 600mm by 4000mm 'seam centres'. * shingle-cladding (typically mad ...
-
Cordwood construction Cordwood construction (also called cordwood masonry or cordwood building, alternatively stackwall or stovewood) is a term used for a natural building method in which short logs are piled crosswise to build a wall, using mortar or cob to perma ...
-
Core-and-veneer Core-and-veneer, brick and rubble, wall and rubble, ashlar and rubble, and emplekton all refer to a building technique where two parallel walls are constructed and the core between them is filled with rubble or other infill, creating one thick wall ...
-
Corn construction Corn construction refers to the use of corn (maize) in construction. The tassel, leaf, silk, cob in husks, and the stalk are the parts of corn. According to the Michigan Department of Agriculture, "corn can be made into fuel, abrasives, solvents, c ...
-
Cornerstone The cornerstone (or foundation stone or setting stone) is the first stone set in the construction of a masonry foundation. All other stones will be set in reference to this stone, thus determining the position of the entire structure. Over time ...
-
Corrosion fatigue Corrosion fatigue is fatigue in a corrosive environment. It is the mechanical degradation of a material under the joint action of corrosion and cyclic loading. Nearly all engineering structures experience some form of alternating stress, and are ...
-
Corrugated galvanised iron Corrugated galvanised iron or steel, colloquially corrugated iron (near universal), wriggly tin (taken from UK military slang), pailing (in Caribbean English), corrugated sheet metal (in North America) and occasionally abbreviated CGI is a bu ...
-
Cost engineering Cost engineering is "the engineering practice devoted to the management of project cost, involving such activities as estimating, cost control, cost forecasting, investment appraisal and risk analysis". "Cost Engineers budget, plan and monitor inve ...
-
Cost overrun A cost overrun, also known as a cost increase or budget overrun, involves unexpected incurred costs. When these costs are in excess of budgeted amounts due to a value engineering underestimation of the actual cost during budgeting, they are known ...
-
Cover meter A cover meter is an instrument to locate rebars and measure the exact concrete cover. Rebar detectors are less sophisticated devices that can only locate metallic objects below the surface. Due to the cost-effective design, the pulse-induction m ...
- Crane -
Crane vessel A crane vessel, crane ship or floating crane is a ship with a crane specialized in lifting heavy loads. The largest crane vessels are used for offshore construction. Conventional monohulls are used, but the largest crane vessels are often catam ...
-
Crawl space A crawl space is an unoccupied, unfinished, narrow space within a building, between the ground and the first (or ground) floor. The crawl space is so named because there is typically only enough room to crawl rather than stand; anything larger t ...
-
Crawler excavator Excavators are heavy construction equipment consisting of a boom, dipper (or stick), bucket and cab on a rotating platform known as the "house". The house sits atop an undercarriage with tracks or wheels. They are a natural progression fro ...
-
Cream City brick Cream City brick is a cream or light yellow-colored brick made from a clay found around Milwaukee, Wisconsin, in the Menomonee River Valley and on the western banks of Lake Michigan. These bricks were one of the most common building materials u ...
-
Creep and shrinkage of concrete Creep and shrinkage of concrete are two physical properties of concrete. The creep of concrete, which originates from the calcium silicate hydrates (C-S-H) in the hardened Portland cement paste (which is the binder of mineral aggregates), is fun ...
-
Cross bracing In construction, cross bracing is a system utilized to reinforce building structures in which diagonal supports intersect. Cross bracing is usually seen with two diagonal supports placed in an X-shaped manner. Under lateral force (such as wind or ...
-
Cross-laminated timber Cross-laminated timber (CLT) (a sub-category of engineered wood) is a wood panel product made from gluing together at least three layers of solid-sawn lumber, i.e., lumber cut from a single log. Each layer of boards is usually oriented perpendicu ...
-
Custom home A custom home is a one-of-a-kind house that is designed for a specific client and for a particular location. The custom home builder may use plans created by an architect or by a professional home designer. Custom homes provide consumers with the ...
-
Cutting tool In the context of machining, a cutting tool or cutter is typically a hardened metal tool that is used to cut, shape, and remove material from a workpiece by means of machining tools as well as abrasive tools by way of shear deformation. The major ...


D

Damp proofing Damp proofing in construction is a type of moisture control applied to building walls and floors to prevent moisture from passing into the interior spaces. Dampness problems are among the most frequent problems encountered in residences. ''Damp p ...
- Deck -
Deconstruction The term deconstruction refers to approaches to understanding the relationship between text and meaning. It was introduced by the philosopher Jacques Derrida, who defined it as a turn away from Platonism's ideas of "true" forms and essences w ...
-
Decorative concrete Decorative concrete is the use of concrete as not simply a utilitarian medium for construction but as an aesthetic enhancement to a structure, while still serving its function as an integral part of the building itself such as floors, walls, driv ...
-
Decorative laminate Decorative laminates are laminated products primarily used as furniture surface materials or wall paneling. It can be manufactured as either high- or low-pressure laminate, with the two processes not much different from each other except for the ...
- Decorative stones -
Deep foundation A deep foundation is a type of foundation that transfers building loads to the earth farther down from the surface than a shallow foundation does to a subsurface layer or a range of depths. A pile or piling is a vertical structural element ...
-
Deep plan A deep plan building is a building in which the horizontal distance from the external wall is many times greater than the floor to floor height. Deep plan buildings make more efficient use of site area. They also cost less to build per unit floor a ...
-
Demolition Demolition (also known as razing, cartage, and wrecking) is the science and engineering in safely and efficiently tearing down of buildings and other artificial structures. Demolition contrasts with deconstruction, which involves taking a ...
-
Demolition waste Demolition waste is waste debris from destruction of buildings, roads, bridges, or other structures. Debris varies in composition, but the major components, by weight, in the US include concrete, wood products, asphalt shingles, brick and clay til ...
-
Design–bid–build Design–bid–build (or design/bid/build, and abbreviated D–B–B or D/B/B accordingly), also known as Design–tender (or "design/tender") traditional method or hardbid, is a project delivery method in which the agency or owner contracts with ...
-
Design–build Design–build (or design/build, and abbreviated D–B or D/B accordingly) is a project delivery system used in the construction industry. It is a method to deliver a project in which the design and construction services are contracted by a sin ...
-
Detailed engineering Detailed engineering are studies which creates a full definition of every aspect of a project development. It includes all the studies to be performed before project construction starts. Detail engineering studies are a key component for every proje ...
-
Diagrid A diagrid (a portmanteau of diagonal grid) is a framework of diagonally intersecting metal, concrete, or wooden beams that is used in the construction of buildings and roofs. It requires less structural steel than a conventional steel fr ...
-
Diamond grinding Diamond grinding is a grinding process that can be applied to a variety of surfaces including floors, stones, and engineering ceramics. It takes advantage of the fact that diamond has the highest hardness of any bulk material. See also * Diamond ...
-
Diamond grinding of pavement Diamond grinding is a pavement preservation technique that corrects a variety of surface imperfections on both concrete and asphalt concrete pavements. Most often utilized on concrete pavement, diamond grinding is typically performed in conjunctio ...
-
Die grinder Die grinders and rotary tools are handheld power tools used for grinding, sanding, honing, polishing, or machining material (typically metal, but also plastic or wood). All such tools are conceptually similar, with no bright dividing line betwe ...
-
Dimensional lumber Lumber is wood that has been processed into dimensional lumber, including beams and planks or boards, a stage in the process of wood production. Lumber is mainly used for construction framing, as well as finishing (floors, wall panels, wi ...
-
Directional boring Directional boring, also referred to as horizontal directional drilling (HDD), is a minimal impact trenchless method of installing underground utilities such as pipe, conduit, or cables in a relatively shallow arc or radius along a prescribed und ...
-
Displacement ventilation Displacement ventilation (DV) It is a room air distribution strategy where conditioned outdoor air is supplied at a low velocity from air supply diffusers located near floor level and extracted above the occupied zone, usually at ceiling height. S ...
-
Distribution board A distribution board (also known as panelboard, breaker panel, electric panel, DB board or DB box) is a component of an electricity supply system that divides an electrical power feed into subsidiary circuits while providing a protective fuse ...
-
Dolos A dolos (plural: dolosse) is a wave-dissipating concrete block used in great numbers as a form of coastal management. It is a type of tetrapod. Weighing up to , dolosse are used to build revetments for protection against the erosive force of ...
-
Domestic roof construction Domestic roof construction is the framing (construction), framing and roof covering which is found on most detached houses in cold and temperate climates. Such roofs are built with mostly timber, take a number of different List of roof shapes, s ...
-
Double envelope house A double envelope house is a passive solar house design which collects solar energy in a solarium and passively allows the warm air to circulate around the house between two sets of walls, a double building envelope. This design is from 1975 by ...
-
Double tee A double tee or double-T beam is a load-bearing structure that resembles two T-beams connected to each other side by side. The strong bond of the flange (horizontal section) and the two webs (vertical members, also known as stems) creates a struc ...
-
Dragon beam Dragon beam is a horizontal, diagonal beam in the corner(s) of some traditional timber framed buildings. The term is commonly used in both hip roof framing and jettying. Older publications may use the synonyms dragging beam, dragging piece, dragg ...
-
Drain (plumbing) A drain is the primary vessel or conduit for unwanted water or waste liquids to be flumed away, either to a more useful area, funnelled into a receptacle, or run into sewers or stormwater mains as waste discharge to be released or processed. ...
-
Drainage Drainage is the natural or artificial removal of a surface's water and sub-surface water from an area with excess of water. The internal drainage of most agricultural soils is good enough to prevent severe waterlogging (anaerobic conditio ...
-
Drifter drill A drifter drill, sometimes called a rock drill, is a tool used in mining and civil engineering to drill into rock. Rock drills are used for making holes for placing dynamite or other explosives in rock blasting, and holes for plug and feather qua ...
-
Drill A drill is a tool used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driverchuck. Hand-operated types are dramatically decreasing in popularity and cordless battery-powered ones proliferating due to ...
-
Drilling and blasting Drilling and blasting is the controlled use of explosives and other methods, such as gas pressure blasting pyrotechnics, to break rock for excavation. It is practiced most often in mining, quarrying and civil engineering such as dam, tunnel o ...
-
Driven to refusal This is an engineering term for describing how far to drive piles. It is also used in surveying when driving metal posts and monument A monument is a type of structure that was explicitly created to commemorate a person or event, or w ...
-
Dropped ceiling A dropped ceiling is a secondary ceiling, hung below the main (structural) ceiling. It may also be referred to as a drop ceiling, T-bar ceiling, false ceiling, suspended ceiling, grid ceiling, drop in ceiling, drop out ceiling, or ceiling til ...
- Dry mortar production line -
Drywall Drywall (also called plasterboard, dry lining, wallboard, sheet rock, gypsum board, buster board, custard board, and gypsum panel) is a panel made of calcium sulfate dihydrate (gypsum), with or without additives, typically extruded between thick ...
-
Drywall mechanic A drywall mechanic is a skilled trade similar to wood carpenters, except they build everything out of light gauge steel studs (not wood studs) all year round, regardless of weather conditions. Drywall mechanics erect various exterior and interior ...
-
Ducrete DUCRETE (Depleted Uranium Concrete) is a high density concrete alternative investigated for use in construction of casks for storage of radioactive waste. It is a composite material containing depleted uranium dioxide aggregate instead of conventi ...
-
Dump truck A dump truck, known also as a dumping truck, dump trailer, dumper trailer, dump lorry or dumper lorry or a dumper for short, is used for transporting materials (such as dirt, gravel, or demolition waste) for construction as well as coal. A typi ...
-
Dumper A dumper or dumper truck (British English) or dump truck (North American English) is a truck designed for carrying bulk material, often on building sites. A dumper has a body which tilts or opens at the back for unloading and is usually an open ...
- Duplex -
Dutch brick Dutch brick (Dutch: IJsselsteen) is a small type of yellow brick made in the Netherlands, or similar brick, and an architectural style of building with brick developed by the Dutch. The brick, made from clay dug from river banks or dredged fr ...
-
Dutch gable roof A Dutch gable roof or gablet roof (in United Kingdom, Britain) is a roof with a small gable at the top of a hip roof. The term Dutch gable is also used to mean a gable with parapets. Some sources refer to this as a gable-on-hip roof. A Dutch ga ...
-
Dutch roof tiles The production of Dutch roof tiles started in the 14th century when the use of fireproof building materials was ordained by government. At that time houses were made of wood and with straw roofing, putting whole cities at risk to destruction by fi ...
-
Dwang In construction, a noggingFleming, Eric. ''Construction technology: an illustrated introduction''. Oxford: Blackwell, 2005. 123, 160. Print. or nogging piece (England and Australia), dwang (Scotland, South Island, New Zealand, and lower/central N ...


E

Early skyscrapers The earliest stage of skyscraper design encompasses buildings built between 1884 and 1945, predominantly in the American cities of New York and Chicago. Cities in the United States were traditionally made up of low-rise buildings, but significan ...
-
Earthbag construction Earthbag construction is an inexpensive building method using mostly local soil to create structures which are both strong and can be quickly built. Earthbag development Features It is also natural building technique developed from historic mi ...
-
Earthquake engineering Earthquake engineering is an interdisciplinary branch of engineering that designs and analyzes structures, such as buildings and bridges, with earthquakes in mind. Its overall goal is to make such structures more resistant to earthquakes. An earth ...
-
Earthquake-resistant structures Earthquake-resistant or aseismic structures are designed to protect buildings to some or greater extent from earthquakes. While no structure can be entirely immune to damage from earthquakes, the goal of earthquake-resistant construction is to ...
-
Earthquake simulation Earthquake simulation applies a real or simulated vibrational input to a structure that possesses the essential features of a real seismic event. Earthquake simulations are generally performed to study the effects of earthquakes on man-made engin ...
-
Eco-cement Eco-Cement is a brand-name for a type of cement which incorporates reactive magnesia (sometimes called caustic calcined magnesia or magnesium oxide, MgO), another hydraulic cement such as Portland cement, and optionally pozzolans and industrial by- ...
-
Egyptian pyramid construction techniques Egyptian pyramid construction techniques are the controversial subject of many hypotheses. These techniques seem to have developed over time; later pyramids were not constructed in the same way as earlier ones. Most of the construction hypotheses ...
-
Electrical engineer Electrical engineering is an engineering discipline concerned with the study, design, and application of equipment, devices, and systems which use electricity, electronics, and electromagnetism. It emerged as an identifiable occupation in the l ...
-
Electrical wiring Electrical wiring is an electrical installation of cabling and associated devices such as switches, distribution boards, sockets, and light fittings in a structure. Wiring is subject to safety standards for design and installation. Allowable ...
-
Electrician An electrician is a tradesperson specializing in electrical wiring of buildings, transmission lines, stationary machines, and related equipment. Electricians may be employed in the installation of new electrical components or the maintenance ...
-
Electric resistance welding Electric resistance welding (ERW) is a welding process where metal parts in contact are permanently joined by heating them with an electric current, melting the metal at the joint. Electric resistance welding is widely used, for example, in manufa ...
-
Elemental cost planning Elemental cost planning is a system of Cost planning and Cost control, typically for buildings, which enables the cost of a scheme to be monitored during design development. 1951 saw the publication of the Ministry of Education Building Bulletin N ...
-
Elevator mechanic An elevator mechanic is someone who constructs, modernizes, repairs or services conveyances. Typically, elevator mechanics work on elevators, escalators, dumbwaiters, wheelchair lifts, moving walkways and other equipment providing vertical transpo ...
-
Encasement Encasement is the coating over, covering or "encasing" of all building components, interior and exterior. This includes all roofing and toxic hazards materials, such as asbestos, lead-based paint, mold/mildew and other harmful substances, found i ...
-
Encaustic tile Encaustic tiles are ceramic tiles in which the pattern or figure on the surface is not a product of the glaze but of different colors of clay. They are usually of two colours but a tile may be composed of as many as six. The pattern appears inla ...
-
Endurance time method The endurance time (ET) method is a Structural dynamics, dynamic structural analysis procedure for seismic assessment of structures. In this procedure, an intensifying dynamic excitation is used as the Structural load, loading function. Endurance ...
-
Energetically modified cement Energetically modified cements (EMCs) are a class of cements made from pozzolans (e.g. fly ash, volcanic ash, pozzolana), silica sand, blast furnace slag, or Portland cement (or blends of these ingredients). The term "energetically modified" aris ...
-
Engineering Engineering is the use of scientific method, scientific principles to design and build machines, structures, and other items, including bridges, tunnels, roads, vehicles, and buildings. The discipline of engineering encompasses a broad rang ...
- Engineered cementitious composite -
Engineering brick Engineering bricks are a type of brick used where strength, low water porosity or acid (flue gas) resistance are needed. Engineering bricks can be used for damp-proof courses. Clay engineering bricks are defined in ''§ 6.4.51'' of ''British Sta ...
-
Engineering, procurement, and construction Engineering, procurement, and construction (EPC) contracts (a type of turnkey contract) are a form of contract used to undertake construction works by the private sector on large-scale and complex infrastructure projects. Overview Under an EPC co ...
-
Enviroboard Enviroboard is a paper-like or cardboard-like construction and packaging material, generally manufactured using compressed, ecologically safe, agricultural material. Most often this means employing the use of high-cellulose waste fibres, such as th ...
-
Environmental impact of concrete The environmental impact of concrete, its manufacture and applications, are complex, driven in part by direct impacts of construction and infrastructure, as well as by CO2 emissions; between 4-8% of total global CO2 emissions come from concrete. Ma ...
- Equivalent Concrete Performance Concept -
Erosion control Erosion control is the practice of preventing or controlling wind or water erosion in agriculture, land development, coastal areas, river banks and construction. Effective erosion controls handle surface runoff and are important techniques in ...
-
Eternit Eternit is a registered trademark for a brand of fibre cement currently owned by the Belgian company Etex. Fibre is often applied in building and construction materials, mainly in roofing and facade products. Material description The term "ce ...
-
Excavator Excavators are heavy construction equipment consisting of a boom, dipper (or stick), bucket and cab on a rotating platform known as the "house". The house sits atop an undercarriage with tracks or wheels. They are a natural progression fro ...
-
Expanded clay aggregate Lightweight expanded clay aggregate (LECA) or expanded clay (exclay) is a lightweight aggregate made by heating clay to around in a rotary kiln. The yielding gases expand the clay by thousands of small bubbles forming during heating producing ...
-
Expanded polystyrene concrete Expanded polystyrene (EPS) concrete (also known as EPScrete, EPS concrete or lightweight concrete) is a form of concrete known for its light weight made from cement and EPS (Expanded Polystyrene). It is a popular material for use in environmentall ...
-
External render An external render is, in its most basic form, a coating applied to the walls of a building, to provide a protective coating which would prevent rain penetration. It also acts as a decorative finish to enhance the appearance of a building. History ...
-
Exterior insulation finishing system Exterior insulation and finish system (EIFS) is a general class of non- load bearing building cladding systems that provides exterior walls with an insulated, water-resistant, finished surface in an integrated composite material system. In Europe ...
-
External wall insulation An external wall insulation system (or EWIS) is a thermally insulated, protective, decorative exterior cladding procedure involving the use of expanded polystyrene, mineral wool, polyurethane foam or phenolic foam, topped off with a reinforced ce ...


F

Falsework Falsework consists of temporary structures used in construction to support a permanent structure until its construction is sufficiently advanced to support itself. For arches, this is specifically called centering. Falsework includes temporary su ...
- Facade -
Facade engineering Building façades are one of the largest, most important elements in the overall aesthetic and technical performance of a building. Façade engineering is the art and science of resolving aesthetic, environmental and structural issues to achieve t ...
-
Facadism Facadism, façadism, or façadomy is the architectural and construction practice where the facade of a building is designed or constructed separately from the rest of a building, or when only the facade of a building is preserved with new buil ...
-
Facility condition assessment Facility condition assessment is an analysis of the condition of a facility in terms of age, design, construction methods, and materials. The individuals who perform the assessment are typically architects and engineers, and skilled-trade technicia ...
-
Fareham red brick Fareham red brick is a famous red-tinged clay brick, from Fareham, Hampshire. Notable buildings constructed of these distinctive bricks include London's Royal Albert Hall and Knowle Hospital Knowle Hospital, was a psychiatric hospital in the v ...
-
Fast-track construction Fast-track building construction is construction industry jargon for a project delivery strategy to start construction before the design is complete. The purpose is to shorten the time to completion. Benefits Shorter schedules are desirable for r ...
-
Fastener A fastener (US English) or fastening (UK English) is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or disman ...
-
Faux painting Faux painting or faux finishing are terms used to describe decorative paint finishes that replicate the appearance of materials such as marble, wood or stone. The term comes from the French word ''faux'', meaning false, as these techniques start ...
- Fédération Française du Bâtiment -
Ferrocement Ferrocement or ferro-cement is a system of construction using reinforced mortar or plaster (lime or cement, sand, and water) applied over an "armature" of metal mesh, woven, expanded metal, or metal-fibers, and closely spaced thin steel rods ...
-
Fiberboard Fiberboard (American English) or fibreboard (British English) is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include particle board or low-density fiberboard (LDF), medi ...
-
Fiber cement siding Fiber cement siding ("fibre cement cladding" in the United Kingdom and "fibro" in Australia) is a building material used to cover the exterior of a building in both commercial and domestic applications. Fiber cement is a composite material mad ...
-
Fiberglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cloth ...
-
Fiberglass sheet laminating Fiberglass sheet laminating is the process of taking a thin fiberglass sheet and laminating it to another material in order to provide strength and support to that material. Process characteristics Fiberglass is composed of very fine strands of g ...
-
Fiber-reinforced composite __NOTOC__ A fiber-reinforced composite (FRC) is a composite building material that consists of three components:Serope Kalpakjian, Steven R Schmid. "Manufacturing Engineering and Technology". International edition. 4th Ed. Prentice Hall, Inc. 2001 ...
-
Fiber-reinforced concrete Fiber-reinforced concrete or fibre-reinforced concrete (FRC) is concrete containing fibrous material which increases its structural integrity. It contains short discrete fibers that are uniformly distributed and randomly oriented. Fibers inclu ...
-
Fiber roll A fiber roll is a temporary erosion control and sediment control device used on construction sites to protect water quality in nearby streams, rivers, lakes and seas from sediment erosion. It is made of straw, coconut fiber or similar materi ...
-
Fibre cement Fibre cement is a composite building and construction material, used mainly in roofing and facade products because of its strength and durability. One common use is in fiber cement siding on buildings. Material description The term "cement" orig ...
-
Fibre-reinforced plastic Fibre-reinforced plastic (FRP; also called fibre-reinforced polymer, or in American English ''fiber'') is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass (in fibreglass), carbon (in carbon-fib ...
-
Filigree concrete The Filigree Wideslab method is a process for construction of concrete floor decks from two interconnected concrete placements, one precast in a factory, and the other done in the field. The method was developed during the late 1960s by Harry H. W ...
-
Fill trestle A fill trestle or filling trestleOld Rails as Trestle Stringers
''Engineering and Mining Jo ...
-
Fire brick A fire brick, firebrick, or refractory is a block of ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal con ...
-
Fire door A fire door is a door with a fire-resistance rating (sometimes referred to as a ''fire protection rating'' for closures) used as part of a passive fire protection system to reduce the spread of fire and smoke between separate compartments of ...
-
Fire protection Fire protection is the study and practice of mitigating the unwanted effects of potentially destructive fires. It involves the study of the behaviour, compartmentalisation, suppression and investigation of fire and its related emergencies, as we ...
(
Active fire protection Active fire protection (AFP) is an integral part of fire protection. AFP is characterized by items and/or systems, which require a certain amount of motion and response in order to work, contrary to passive fire protection. Categories of active fi ...
/
Passive fire protection Passive fire protection (PFP) is components or systems of a building or structure that slows or impedes the spread of the effects of fire or smoke without system activation, and usually without movement. Examples of passive systems include floor- ...
) -
Fire Protection Engineering Fire protection engineering is the application of science and engineering principles to protect people, property, and their environments from the harmful and destructive effects of fire and smoke. It encompasses engineering which focuses on fire ...
-
Firestop A firestop or fire-stopping is a form of passive fire protection that is used to seal around openings and between joints in a fire-resistance-rated wall or floor assembly. Firestops are designed to maintain the fire-resistance rating of a wall o ...
ping -
Fireproofing Fireproofing is rendering something (structures, materials, etc.) resistant to fire, or incombustible; or material for use in making anything fire-proof. It is a passive fire protection measure. "Fireproof" or "fireproofing" can be used as a n ...
-
Fire safety Fire safety is the set of practices intended to reduce the destruction caused by fire. Fire safety measures include those that are intended to prevent the ignition of an uncontrolled fire and those that are used to limit the development and eff ...
-
Fire sprinkler system A fire sprinkler system is an active fire protection method, consisting of a water supply system, providing adequate pressure and flowrate to a water distribution piping system, onto which fire sprinklers are connected. Although historically on ...
-
First fix and second fix First fix and second fix are terms used in the UK and Irish housebuilding and commercial building construction industry. First fix comprises all the work needed to take a building from foundation to putting plaster on the internal walls. This inclu ...
- Flashing -
Flat roof A flat roof is a roof which is almost level in contrast to the many types of sloped roofs. The slope of a roof is properly known as its pitch and flat roofs have up to approximately 10°. Flat roofs are an ancient form mostly used in arid c ...
-
Floating raft system Floating raft is a land-based building foundation that protects it against settlement and liquefaction of soft soil from seismic activity. It was a necessary innovation in the development of tall buildings in the wet soil of Chicago in the 19th ce ...
-
Floor plan In architecture and building engineering, a floor plan is a technical drawing to scale, showing a view from above, of the relationships between rooms, spaces, traffic patterns, and other physical features at one level of a structure. Dimensio ...
-
Flux-cored arc welding Flux-cored arc welding (FCAW or FCA) is a semi-automatic or automatic arc welding process. FCAW requires a continuously-fed consumable tubular electrode containing a flux and a constant-voltage or, less commonly, a constant-current welding power s ...
-
Fly ash brick Fly ash brick (FAB) is a building material, specifically masonry units, containing fly ash and water. Compressed at and cured for in a steam bath, then toughened with an air entrainment agent, the bricks can last for more than cycles. Owing ...
- Foam concrete -
Foam glass Foam glass is a porous glass foam material. Its advantages as a building material include its light weight, high strength, and thermal and acoustic insulating properties. It is made by heating a mixture of crushed or granulated glass and a blowi ...
-
Forge welding Forge welding (FOW), also called fire welding, is a solid-state welding process that joins two pieces of metal by heating them to a high temperature and then hammering them together. It may also consist of heating and forcing the metals together ...
-
Formstone Formstone is a type of stucco commonly applied to brick rowhouses in many East Coast urban areas in the United States, although it is most strongly associated with Baltimore. As a form of simulated masonry, Formstone is commonly colored and shaped ...
-
Formwork Formwork is Molding (process), molds into which concrete or similar materials are either precast concrete, precast or cast-in-place concrete, cast-in-place. In the context of concrete construction, the falsework supports the shuttering mold ...
-
Foundation Foundation may refer to: * Foundation (nonprofit), a type of charitable organization ** Foundation (United States law), a type of charitable organization in the U.S. ** Private foundation, a charitable organization that, while serving a good cause ...
-
Framer A framer is someone who frames (shapes or gives shape to), or someone who constructs."Framer". def. 1. and "Frame, v." def. 5 and 7. ''Oxford English Dictionary'' Second Edition on CD-ROM (v. 4.0) © Oxford University Press 2009 Building ind ...
- Framing - Frost damage -
Furring In construction, furring (furring strips) are strips of wood or other material applied to a structure to level or raise the surface, to prevent dampness, to make space for insulation, to level and resurface ceilings or walls, or to increase the be ...


G

Gable roof A gable roof is a roof consisting of two sections whose upper horizontal edges meet to form its ridge. The most common roof shape in cold or temperate climates, it is constructed of rafters, roof trusses or purlins. The pitch of a gable roof ca ...
-
Gambrel A gambrel or gambrel roof is a usually symmetrical two-sided roof with two slopes on each side. (The usual architectural term in eighteenth-century England and North America was "Dutch roof".) The upper slope is positioned at a shallow angle, w ...
-
Gas metal arc welding Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) and metal active gas (MAG) is a welding process in which an electric arc forms between a consumable MIG wire electrode and the workpiece metal(s), which hea ...
-
Geofoam Geofoam is expanded polystyrene (EPS) or extruded polystyrene (XPS) manufactured into large lightweight blocks. The blocks vary in size but are often . The primary function of geofoam is to provide a lightweight void fill below a highway, bridge ...
-
Geologic preliminary investigation {{Refimprove, date=September 2007 A geologic preliminary investigation is a survey of the subsoil conducted by an engineering geologist in conjunction with a civil engineer. Typically, the footprint of the structure is established on the proposed ...
-
GigaCrete GigaCrete refers to a family of green building products based on proprietary non-silica, non-toxic, non-combustible, cementitious, mineral-based binders comixed with filler material. GigaCrete building materials do not contain silica-based san ...
-
Girt In architecture or structural engineering, a girt, also known as a sheeting rail, is a horizontal structural member in a framed wall. Girts provide lateral support to the wall panel, primarily, to resist wind loads. A comparable element in roof ...
-
Glass brick Glass brick, also known as glass block, is an architectural element made from glass. The appearance of glass blocks can vary in color, size, texture and form. Glass bricks provide visual obscuration while admitting light. The modern glass block w ...
-
Glass fiber reinforced concrete Glass fibre reinforced concrete (GFRC) is a type of fibre-reinforced concrete. The product is also known as glassfibre reinforced concrete or GRC in British English. Glass fibre concretes are mainly used in exterior building façade panels and ...
-
Glazier A glazier is a tradesman responsible for cutting, installing, and removing glass (and materials used as substitutes for glass, such as some plastics).Elizabeth H. Oakes, ''Ferguson Career Resource Guide to Apprenticeship Programs'' ( Infobase: ...
- Glazing -
Glued laminated timber Glued laminated timber, commonly referred to as glulam, is a type of structural engineered wood product constituted by layers of dimensional lumber bonded together with durable, moisture-resistant structural adhesives so that all of the grain run ...
-
Grade beam A grade beam or grade beam footing is a component of a building's foundation. It consists of a reinforced concrete beam that transmits the load from a bearing wall into spaced foundations such as pile caps or caissons. It is used in conditions wher ...
-
Grader A grader, also commonly referred to as a road grader, motor grader, or simply a blade, is a form of heavy equipment with a long blade used to create a flat surface during grading. Although the earliest models were towed behind horses, and lat ...
-
Grating A grating is any regularly spaced collection of essentially identical, parallel, elongated elements. Gratings usually consist of a single set of elongated elements, but can consist of two sets, in which case the second set is usually perpendicul ...
-
Green building Green building (also known as green construction or sustainable building) refers to both a structure and the application of processes that are environmentally responsible and resource-efficient throughout a building's life-cycle: from planni ...
-
Green building and wood Green building is a technique that aims to create structures that are environmentally responsible and resource-efficient throughout their lifecycle – including siting, design, construction, operation, maintenance, renovation, and demolition. A ...
-
Green building in Germany German developments that employ green building techniques include: *The Solarsiedlung (Solar Settlement) in Freiburg, Germany, which features PlusEnergy houses. *The Sonnenschiff (Sun Ship) in Freiburg, Germany, which is also built according to Ge ...
-
Green (certification) Green rating or certification is used to indicate the level of environmental friendliness for real estate properties. In the US, it is a real estate designation for REALTORs approved by the (American) National Association of Realtors (NAR). Th ...
-
Green roof A green roof or living roof is a roof of a building that is partially or completely covered with vegetation and a growing medium, planted over a waterproofing membrane. It may also include additional layers such as a root barrier and drainage ...
- Green wall -
Groundbreaking Groundbreaking, also known as cutting, sod-cutting, turning the first sod, or a sod-turning ceremony, is a traditional ceremony in many cultures that celebrates the first day of construction for a building or other project. Such ceremonies are o ...
- Ground reinforcement -
Grout Grout is a dense fluid which hardens to fill gaps or used as reinforcement in existing structures. Grout is generally a mixture of water, cement and sand, and is employed in pressure grouting, embedding rebar in masonry walls, connecting secti ...
-
Grouted roof A grouted roof is a form of slate roof. It has developed as a form of vernacular architecture associated with the West coast of the British Isles. A grouted roof is distinguished by having an overall coat of a cementitious render. Conventional s ...
-
Guastavino tile The Guastavino tile arch system is a version of Catalan vault introduced to the United States in 1885 by Spanish architect and builder Rafael Guastavino (1842–1908). It was patented in the United States by Guastavino in 1892. Description ...
-
Gypsum block Gypsum block is a massive lightweight building material composed of solid gypsum, for building and erecting lightweight, fire-resistant, non-load bearing interior walls, partition walls, cavity walls, skin walls, and pillar casing indoors. Gypsum ...
-
Gypsum concrete Gypsum concrete is a building material used as a floor underlayment used in wood-frame and concrete construction for fire ratings, sound reduction, radiant heating, and floor leveling. It is a mixture of gypsum plaster, Portland cement, and sand. ...


H

Hammer A hammer is a tool, most often a hand tool, consisting of a weighted "head" fixed to a long handle that is swung to deliver an impact to a small area of an object. This can be, for example, to drive nails into wood, to shape metal (as w ...
-
Hammerbeam roof A hammerbeam roof is a decorative, open timber roof truss typical of English Gothic architecture and has been called "...the most spectacular endeavour of the English Medieval carpenter". They are traditionally timber framed, using short beams pr ...
-
Hammer drill A hammer drill, also known as a percussion drill or impact drill, is a power tool used chiefly for drilling in hard materials. It is a type of rotary drill with an impact mechanism that generates a hammering motion. The percussive mechanism provid ...
-
Hard hat A hard hat is a type of helmet predominantly used in workplace environments such as industrial or construction sites to protect the head from injury due to falling objects, impact with other objects, debris, rain, and electric shock. Suspensio ...
- Harling -
Harvard brick Harvard brick is a technique for building brick facades in imitation of much older ones. It was originated by architect Charles McKim in conjunction with the construction (1889) of the Johnston Gate, the "oldest and grandest" of the gates surround ...
-
Heat pump A heat pump is a device that can heat a building (or part of a building) by transferring thermal energy from the outside using a refrigeration cycle. Many heat pumps can also operate in the opposite direction, cooling the building by removing h ...
-
Heavy equipment Heavy equipment or heavy machinery refers to heavy-duty vehicles specially designed to execute construction tasks, most frequently involving earthwork operations or other large construction tasks. ''Heavy equipment'' usually comprises five e ...
-
Heavy equipment operator A heavy equipment operator operates heavy equipment used in engineering and construction projects.{{cite book, title=Construction Safety Handbook , author= V. J. Davies, Ken Tomasin, year=1996, publisher=Thomas Telford, url=https://books.google.c ...
-
Hempcrete Hempcrete or hemplime is biocomposite material, a mixture of hemp hurds ( shives) and lime, sand, or pozzolans, which is used as a material for construction and insulation. It is marketed under names like Hempcrete, Canobiote, Canosmose, Isochan ...
-
Herodotus Machine The Herodotus Machine was a machine described by Herodotus, a Ancient Greece, Greek historian born in Halicarnassus, Caria (modern-day Bodrum, Turkey). Herodotus claims this invention enabled the ancient Egyptians to construct the Egyptian pyrami ...
-
Herringbone pattern The herringbone pattern is an arrangement of rectangles used for floor tilings and road pavement, so named for a fancied resemblance to the bones of a fish such as a herring. The blocks can be rectangles or parallelograms. The block edge length ...
- High-performance fiber-reinforced cementitious composites -
High-rise building A tower block, high-rise, apartment tower, residential tower, apartment block, block of flats, or office tower is a tall building, as opposed to a low-rise building and is defined differently in terms of height depending on the jurisdictio ...
-
High-visibility clothing High-visibility clothing, sometimes shortened to hi vis or hi viz, is any clothing worn that is highly luminescent in its natural matt property or a color that is easily discernible from any background. It is most commonly worn on the torso and ...
-
History of construction The history of construction embraces many other fields, including structural engineering, civil engineering, city growth and population growth, which are relatives to branches of technology, science, history, and architecture. The fields permit al ...
-
History of structural engineering The history of structural engineering dates back to at least 2700 BC when the step pyramid for Pharaoh Djoser was built by Imhotep, the first architect in history known by name. Pyramids were the most common major structures built by ancient civi ...
-
History of the world's tallest buildings The tallest building in the world, as of , is the Burj Khalifa. The title of " world's tallest building" has been borne by various buildings, such as the Lincoln Cathedral, the Empire State Building and the original World Trade Center. Before the ...
-
Heating, ventilation, and air-conditioning Heating, ventilation, and air conditioning (HVAC) is the use of various technologies to control the temperature, humidity, and purity of the air in an enclosed space. Its goal is to provide thermal comfort and acceptable indoor air quality. HV ...
- Hoisting -
Home construction Home construction or residential construction is the process of constructing a house, apartment building, or similar residential building generally referred to as a 'home' when giving consideration to the people who might now or someday reside th ...
-
Home improvement The concept of home improvement, home renovation, or remodeling is the process of renovating or making additions to one's home. Home improvement can consist of projects that upgrade an existing home interior (such as electrical and plumbing), ...
-
Home wiring Homes typically have several kinds of home wiring, including electrical wiring for lighting and power distribution, permanently installed and portable appliances, telephone, heating or ventilation system control, and increasingly for home theatre ...
-
Hot-melt adhesive Hot-melt adhesive (HMA), also known as hot glue, is a form of thermoplastic adhesive that is commonly sold as solid cylindrical sticks of various diameters designed to be applied using a hot glue gun. The gun uses a continuous-duty heating eleme ...
-
House A house is a single-unit residential building. It may range in complexity from a rudimentary hut to a complex structure of wood, masonry, concrete or other material, outfitted with plumbing, electrical, and heating, ventilation, and air condi ...
-
House painter and decorator A house painter and decorator is a tradesman responsible for the painting and decorating of buildings, and is also known as a decorator or house painter.''The Modern Painter and Decorator'' volume 1 1921 Caxton The purpose of painting is to imp ...
-
House raising House raising (house lifting, house jacking, barn jacking, building jacking) is the process of separating a building from its foundation and temporarily raising it with hydraulic screw jacks. The process is the first step in structure relocatio ...
-
Housewrap Housewrap (or house wrap), also known by the genericized trademark homewrap (or home wrap), generally denotes a modern synthetic material used to protect buildings. Housewrap functions as a weather-resistant barrier, preventing rain or other fo ...
-
Hurricane-proof building Tornadoes, cyclones, and other storms with strong winds damage or destroy many buildings. However, with proper design and construction, the damage to buildings by these forces can be greatly reduced. A variety of methods can help a building surviv ...
- Hybrid masonry -
Hydrodemolition Hydrodemolition (also known as hydro demolition, hydroblasting, hydro blasting, hydromilling, waterblasting, and waterjetting) is a concrete removal technique which utilizes high-pressure water, often containing an abrasive material, to remove d ...
-
Hydrophobic concrete Hydrophobic concrete is concrete that repels water. It meets the standards outlined in the definition of waterproof concrete. Developed in Australia in the mid-20th century, millions of cubic yards of hydrophobic concrete have been laid in Aus ...
-
Hypertufa Hypertufa is an anthropic rock made from various aggregates bonded together using Portland cement. Hypertufa is intended as a manufactured substitute for natural tufa, which is a slowly precipitated limestone rock; being very porous, it is favor ...


I

I-beam An I-beam, also known as H-beam (for universal column, UC), w-beam (for "wide flange"), universal beam (UB), rolled steel joist (RSJ), or double-T (especially in Polish language, Polish, Bulgarian language, Bulgarian, Spanish language, Spanish ...
-
I-joist An engineered wood joist, more commonly known as an I-joist, is a product designed to eliminate problems that occur with conventional wood joists. Invented in 1969, the I-joist is an engineered wood product that has great strength in relation to i ...
- Iberian paleochristian decorated tile -
Illegal construction Illegal construction (also known as illegal building or illegal housing) is construction work (or the result of such) without a valid construction permit. Besides the potential technical hazards on uncontrolled construction sites and in finished ...
-
Imbrex and tegula The imbrex and tegula (plural imbrices and tegulae) were overlapping roof tiles used in ancient Greek and Roman architecture as a waterproof and durable roof covering. They were made predominantly of fired clay, but also sometimes of marble, br ...
-
Impact wrench An impact wrench (also known as an impactor, impact gun, air wrench, air gun, rattle gun, torque gun, windy gun) is a socket wrench power tool designed to deliver high torque output with minimal exertion by the user, by storing energy in a rota ...
-
Imperial roof decoration Chinese imperial roof decorations or roof charms or roof-figures () or "walking beasts" () or "crouching beasts" () were statuettes placed along the ridge line of official buildings of the Chinese empire. Only official buildings (palaces, govern ...
-
Industrialization of construction The industrialization of construction is the process through which construction aims to improve productivity through increased mechanization and automation. The process commonly involves modularization, prefabrication, preassembly, and mass prod ...
-
Insulated glazing Insulating glass (IG) consists of two or more glass window panes separated by a space to reduce heat transfer across a part of the building envelope. A window with insulating glass is commonly known as double glazing or a double-paned window, ...
-
Insulated siding Insulated siding is home siding that includes rigid foam insulation, fused behind the exterior surface of the wall, for the purpose of reducing energy consumption, increasing the insulation value of the wall system and improving the stability and a ...
-
Insulating concrete form Insulating concrete form or insulated concrete form (ICF) is a system of formwork for reinforced concrete usually made with a rigid thermal insulation that stays in place as a permanent interior and exterior substrate for walls, floors, and roofs. ...
- Insulation materials - Integrated framing assembly -
Integrated project delivery Integrated project delivery (IPD) is a construction project delivery method that seeks efficiency and involvement of all participants (people, systems, business structures and practices) through all phases of design, fabrication, and construction. I ...
- Interior protection -
International Building Code The International Building Code (IBC) is a model building code developed by the International Code Council (ICC). It has been adopted for use as a base code standard by most jurisdictions in the United States. The IBC addresses both health and saf ...
-
Ironworker An ironworker is a tradesman who works in the iron-working industry. Ironworkers assemble the structural framework in accordance with engineered drawings and install the metal support pieces for new buildings. They also repair and renovate o ...


J

Jackhammer A jackhammer (pneumatic drill or demolition hammer in British English) is a pneumatic or electro-mechanical tool that combines a hammer directly with a chisel. It was invented by William Mcreavy, who then sold the patent to Charles Brady Kin ...
-
Jack post A jack post (telepost, adjustable steel column) is a steel post used in the construction trades for temporary support of ceilings, walls and trenches (shoring). They are designed to be able to mechanically telescope to about twice their shortest ...
-
Japanese carpentry Japanese carpentry was developed more than a millennium ago through Chinese architectural influences from the 12th century. It is a form of ancient Chinese wooden architecture and woodworking joints that involves building wooden furniture with ...
-
Jettying Jettying (jetty, jutty, from Old French ''getee, jette'') is a building technique used in medieval timber-frame buildings in which an upper floor projects beyond the dimensions of the floor below. This has the advantage of increasing the availa ...
-
Jigsaw Jigsaw may refer to: * Jigsaw (tool), a tool used for cutting arbitrary curves * Jigsaw puzzle, a tiling puzzle that requires the assembly of interlocking pieces Arts and media Comics * Jigsaw (Marvel Comics), a supervillain and arch-enemy of ...
-
Joiner A joiner is an artisan and tradesperson who builds things by joining pieces of wood, particularly lighter and more ornamental work than that done by a carpenter, including furniture and the "fittings" of a house, ship, etc. Joiners may work in ...
y -
Joint A joint or articulation (or articular surface) is the connection made between bones, ossicles, or other hard structures in the body which link an animal's skeletal system into a functional whole.Saladin, Ken. Anatomy & Physiology. 7th ed. McGraw ...
-
Joint compound Joint compound (also known as drywall compound, drywall mud, or mastic) is a white powder of primarily gypsum dust mixed with water to form a paste the consistency of cake frosting, which is used with paper or fiber ''joint tape'' to seal jo ...
- Johnson bar


K

Knee wall A knee wall is a short wall, typically under three feet (one metre) in height, used to support the rafters in timber roof construction. In his book ''A Visual Dictionary of Architecture'', Francis D. K. Ching defines a knee wall as "a short wall ...
-
Knockdown texture Knockdown texture is a drywall finishing style. It is a mottled texture, it has more changes in textures than a simple flat finish, but less changes than Orange peel (effect), orange peel, or Popcorn ceiling, popcorn, texture. Knockdown texture i ...


L

Laborer A laborer (or labourer) is a person who works in manual labor types in the construction industry workforce. Laborers are in a working class of wage-earners in which their only possession of significant material value is their labor. Industries e ...
-
Ladder A ladder is a vertical or inclined set of rungs or steps used for climbing or descending. There are two types: rigid ladders that are self-supporting or that may be leaned against a vertical surface such as a wall, and rollable ladders, such a ...
-
Lakhori bricks Lakhori bricks (also Badshahi bricks, Kakaiya bricks, Lakhauri bricks) are flat, thin, red burnt-clay bricks, originating from the Indian subcontinent that became increasingly popular element of Mughal architecture during Shah Jahan, and remained ...
-
Laminate panel Laminate panel is a type of manufactured timber made from thin sheets of substrates or wood veneer. It is similar to the more widely used plywood, except that it has a plastic, protective layer on one or both sides. Laminate panels are used instead ...
-
Lath and plaster Lath and plaster is a building process used to finish mainly interior dividing walls and ceilings. It consists of narrow strips of wood ( laths) which are nailed horizontally across the wall studs or ceiling joists and then coated in plaster. The ...
-
Laser level In surveying and construction, the laser level is a control tool consisting of a rotating laser beam projector that can be affixed to a tripod. The tool is leveled according to the accuracy of the device and projects a fixed red or green beam ...
-
Launching gantry A launching gantry (also called beam launcher, girder launcher, bridge building crane, and bridge-building machine, locally nicknamed the "Iron Monster") is a special-purpose mobile gantry crane used in bridge construction, specifically segmental ...
-
Lean construction Lean construction is a combination of operational research and practical development in design and construction with an adoption of lean manufacturing principles and practices to the end-to-end design and construction process. Unlike manufacturing ...
-
Level luffing crane A level-luffing crane is a crane mechanism where the hook remains at the same level while luffing: moving the jib up and down, so as to move the hook inwards and outwards relative to the base. Usually the description is only applied to those wi ...
-
Lewis (lifting appliance) Lewis may refer to: Names * Lewis (given name), including a list of people with the given name * Lewis (surname), including a list of people with the surname Music * Lewis (musician), Canadian singer * "Lewis (Mistreated)", a song by Radiohead ...
-
Lift slab construction Lift slab construction (also called the Youtz-Slick Method) is a method of constructing concrete buildings by casting the floor or roof slab on top of the previous slab and then raising (jacking) the slab up with hydraulic jacks. This method of co ...
-
Lifting equipment Lifting equipment, also known as lifting gear, is a general term for any equipment that can be used to lift and lower loads. Types of lifting equipment include heavy machinery such as the patient lift, overhead cranes, forklifts, jacks, building ...
-
Lighting Lighting or illumination is the deliberate use of light to achieve practical or aesthetic effects. Lighting includes the use of both artificial light sources like lamps and light fixtures, as well as natural illumination by capturing daylig ...
- Light tower -
Lightening holes Lightening holes are holes in structural components of machines and buildings used by a variety of engineering disciplines to make structures lighter. The edges of the hole may be flanged to increase the rigidity and strength of the component. ...
-
Lime mortar Lime mortar or torching is composed of lime and an aggregate such as sand, mixed with water. The ancient Egyptians were the first to use lime mortars, which they used to plaster their temples. In addition, the Egyptians also incorporated various ...
-
Line of thrust The line of thrust is the locus of the points, through which forces pass in a retaining wall or an arch. It is the line, along which internal forces flowLive bottom trailer A live bottom trailer is a semi-trailer used for hauling loose material such as asphalt, grain, potatoes, sand and gravel. A live bottom trailer is the alternative to a dump truck or an end dump trailer. The typical live bottom trailer has a con ...
-
Living building material A living building material (LBM) is a material used in construction or industrial design that behaves in a way resembling a living organism. Examples include: self-mending biocement, self-replicating concrete replacement, and mycelium-based com ...
-
Load-bearing wall A load-bearing wall or bearing wall is a wall that is an active structural element of a building, which holds the weight of the elements above it, by conducting its weight to a foundation structure below it. Load-bearing walls are one of the ear ...
-
Loader Loader can refer to: * Loader (equipment) * Loader (computing) ** LOADER.EXE, an auto-start program loader optionally used in the startup process of Microsoft Windows ME * Loader (surname) * Fast loader * Speedloader * Boot loader ** LOADER.COM ...
-
Log building Log buildings and structures can be categorized as historic and modern. A diverse selection of their forms and styles with examples of architectural elements is discussed in the following articles: *Log cabin – a rustic dwelling *Log house – a ...
-
London stock brick London stock brick is the type of handmade brick which was used for the majority of building work in London and South East England until the growth in the use of Flettons and other machine-made bricks in the early 20th century. Its distinctive y ...
- Low-energy building techniques -
Low-energy house A low-energy house is characterized by an energy-efficient design and technical features which enable it to provide high living standards and comfort with low energy consumption and carbon emissions. Traditional heating and active cooling systems ...
-
Low-rise building A low-rise is a building that is only a few stories tall or any building that is shorter than a high-rise, though others include the classification of mid-rise. Definition Emporis defines a low-rise as "an enclosed structure below 35 metres 15 ...
-
Lump sum contract A lump sum contract in construction is one type of construction contract, sometimes referred to as stipulated-sum, where a single price is quoted for an entire project based on plans and specifications and covers the entire project and the owner kn ...
-
Lunarcrete Lunarcrete, also known as "mooncrete", an idea first proposed by Larry A. Beyer of the University of Pittsburgh in 1985, is a hypothetical construction aggregate, similar to concrete, formed from lunar regolith, that would reduce the construction ...
-
Lustron house Lustron houses are prefabricated enameled steel houses developed in the post-World War II era United States in response to the shortage of homes for returning G.I.s by Chicago industrialist and inventor Carl Strandlund. Considered low-maintenan ...


M

Mansard roof A mansard or mansard roof (also called a French roof or curb roof) is a four-sided gambrel-style hip roof characterised by two slopes on each of its sides, with the lower slope, punctured by dormer windows, at a steeper angle than the upper. The ...
-
Marbleizing Marbleizing or faux marbling is the preparation and finishing of a surface to imitate the appearance of polished marble. It is typically used in buildings where the cost or weight of genuine marble would be prohibitive. Faux marbling is a special c ...
-
Masonry Masonry is the building of structures from individual units, which are often laid in and bound together by mortar; the term ''masonry'' can also refer to the units themselves. The common materials of masonry construction are bricks, building ...
-
Masonry trowel The Masonry trowel is a hand trowel used in brickwork or stonework for levelling, spreading and shaping mortar or concrete. They come in several shapes and sizes depending on the task. The following is a list of the more common masonry trowels: ...
-
Masonry veneer Masonry veneer walls consist of a single non-structural external layer of masonry, typically made of brick, stone or manufactured stone. Masonry veneer can have an air space behind it and is technically called "anchored veneer". A masonry veneer ...
-
Mass concrete Mass concrete is defined by American Concrete Institute Committee 207 as "any volume of concrete with dimensions large enough to require that measures be taken to cope with the generation of heat from hydration of cement and attendant volume change ...
-
Master builder A master builder or master mason is a central figure leading construction projects in pre-modern times (a precursor to the modern architect and engineer). Historically, the term has generally referred to "the head of a construction project in the ...
-
Material efficiency Material efficiency is a description or metric (''M''p) (the ratio of material used to the supplied material) which refers to decreasing the amount of a particular material needed to produce a specific product. Making a usable item out of thinner ...
-
Material passport A material passport is a document consisting of all the materials that are included in a product or construction. It consists of a set of data describing defined characteristics of materials in products, which give them value for recovery, recycl ...
-
Mathematical tile Mathematical tiles are tiles which were used extensively as a building material in the southeastern counties of England—especially East Sussex and Kent—in the 18th and early 19th centuries. They were laid on the exterior of timber-framed b ...
-
Mechanical connections Mechanical rebar connections, also known as mechanical splices or mechanical coupler, are used to join lengths of rebar together to transfer forces from one steel rebar to another. Mechanical couplers can be advantageous in comparison with conven ...
-
Mechanical, electrical, and plumbing Mechanical, electrical and plumbing (MEP) refers to the installation of services which provide a comfortable space for the building occupants. In residential and commercial buildings, these elements are often designed by a specializeMEP engineerin ...
-
Mechanics lien A mechanic's lien is a security interest in the title to property for the benefit of those who have supplied labor or materials that improve the property. The lien exists for both real property and personal property. In the realm of real property, ...
-
Medieval letter tile Medieval letter tiles are one-letter ceramic tiles that were employed in monasteries and churches of the late Middle Ages for the creation of Christian inscriptions on floors and walls. They were created by pressing stamps bearing a reverse imag ...
-
Medium-density fibreboard Medium-density fibreboard (MDF) is an engineered wood product made by breaking down hardwood or softwood residuals into wood fibres, often in a defibrator, combining it with wax and a resin binder, and forming it into panels by applying high temp ...
-
Megaproject A megaproject is an extremely large-scale investment project. According to the ''Oxford Handbook of Megaproject Management'', "Megaprojects are large-scale, complex ventures that typically cost $1 billion or more, take many years to develop and ...
-
Megastructure A megastructure is a very large artificial object, although the limits of precisely how large vary considerably. Some apply the term to any especially large or tall building. Some sources define a megastructure as an enormous self-supporting a ...
-
Metal profiles Metal profile sheet systems are used to build cost efficient and reliable envelopes of mostly commercial buildings. They have evolved from the single skin metal cladding often associated with agricultural buildings to multi-layer systems for ind ...
-
Microtunneling Microtunneling or microtunnelling is a tunnel construction technique used to construct utility tunnels from approximately in diameter. Because of their incredibly small diameter, it is not possible to have an operator driving the tunneling machin ...
- Middle-third rule -
Miller Act The Miller Act (ch. 642, Sec. 1-3, 49 stat. 793,794, codified as amended in Title 40 of the United States Code) requires prime contractors on some government construction contracts to post bonds guaranteeing both the performance of their contrac ...
-
Millwork Millwork is historically any Sawmill, wood mill produced decorative materials used in Construction#Building construction, building construction. Stock profiled and patterned millwork building components fabricated by Milling (machining), millin ...
-
Millwright A millwright is a craftsperson or skilled tradesperson who installs, dismantles, maintains, repairs, reassembles, and moves machinery in factories, power plants, and construction sites. The term ''millwright'' (also known as ''industrial mecha ...
- Mobile crane - Modular addition -
Modular building A modular building is a prefabricated building that consists of repeated sections called modules. Modularity involves constructing sections away from the building site, then delivering them to the intended site. Installation of the prefabricated ...
- Moiré tell-tale - Moling - Moment-resisting frame - Monocrete construction - Mono-pitched roof - Mortar (masonry), Mortar - Mudbrick - Mudcrete - Multi-tool (power tool), Multi-tool


N

Nail gun - Nanak Shahi bricks - Nanoconcrete - NEC Engineering and Construction Contract - New Austrian tunnelling method - New-construction building commissioning - Nibbler - Non-shrink grout


O

Occupancy - Offshore construction - Off-site construction - Operational bill - Opus africanum - Opus albarium - Opus craticum - Opus gallicum - Opus incertum - Opus isodomum - Opus latericium - Opus mixtum - Opus quadratum - Opus reticulatum - Opus spicatum - Opus vittatum - Oriented strand board - Oxy-fuel welding and cutting


P

Painter and decorator - Painterwork - Panelling - Pantile - Papercrete - Parge coat - Particle board - Passive daylighting - Passive house - Passive survivability - Pavement (architecture), Pavement - Pavement engineering - Pavement milling - Paver base - Penetrant (mechanical, electrical, or structural) - Performance bond - Permeable paving - Pierrotage - Pile cap - Pile driver - Pile splice - Pipefitter - Pipelayer (vehicle), Pipelayer - Planetary surface construction - Plank (wood) - Planning permission - Planning permission in the United Kingdom - Plasma arc welding - Plasterer - Plasterwork - Plastic lumber - Plot plan - Plug and feather - Plumb bob - Plumber - Plumbing - Plumbing drawing - Pneumatic tool - Pole building framing - Polished concrete - Polychrome brickwork - Polymer concrete - Porch collapse - Portable building - Portland cement - Portland stone - Portuguese pavement - Post in ground - Poteaux-sur-sol - Powder coating - Power concrete screed - Power shovel - Power tool - Power trowel - Precast concrete - Pre-construction services - Pre-engineered building - Prefabricated building - Prefabrication - Prestressed concrete - Prestressed structure - Primer (paint) - Project agreement (Canada) - Project delivery method - Project management - Properties of concrete - Punch list - Purlin


Q

Quadruple glazing - Quantity surveyor - Quantity take-off - Quarry tile - Quarter minus


R

R-value (insulation) - Radial arm saw - Radiant barrier - Radiator reflector - Rafter - Rainscreen - Raised floor - RAL colour standard - List of RAL colors, RAL colors - Rammed earth - Random orbital sander - Rapid construction - Ready-mix concrete - Real estate - Rebar - Rebar detailing - Rebar spacer - Reciprocal frame - Reciprocating saw - Red List building materials - Red rosin paper - Redevelopment - Reed mat (plastering) - Reema construction - Reglet - Reinforced concrete - Reinforced concrete structures durability - Relocatable buildings - Repointing - Resilience (engineering and construction) - Retentions in the British construction industry - Rice-hull bagwall construction - Rigger (industry), Rigger - Rigid panel - Ring crane - Rivet gun - Road - Road surface - Roller-compacted concrete - Roman cement - Roof - Roof coating - Roof edge protection - Roofer - Roof shingle - Roof tiles - Room air distribution - Rosendale cement - Rotary hammer - Roughcast - Rubberized asphalt - Rubble - Rubble trench foundation - Rubblization - Ruin value


S

Saddle roof - Salt-concrete - Saltillo tile - Sander - Sandhog - Sandjacking - Sandwich panel - Sarking - Saw-tooth roof - Sawyer (occupation), Sawyer - Scabbling - Scaffolding - Schmidt hammer - Screed - Screw piles - Scrim and sarking - Sediment control - Segregation in concrete - Self-build - Self-cleaning floor - Self-consolidating concrete - Self-framing metal buildings - Self-leveling concrete - Septic tank - Serviceability (structure), Serviceability - Sett (paving), Sett - Settlement (structural) - Sewage treatment - Shallow foundation - Shear (sheet metal), Shear - Shear wall - Sheet metal - Shelf angle - Shielded metal arc welding - Shiplap - Shop drawing - Shoring - Shotcrete - Shovel - Shovel ready - Sick building syndrome - Siding (construction), Siding - Sill plate - Site survey - Skyscraper - Skyscraper design and construction - Slate industry in Wales - Slater - Sledgehammer - Slipform stonemasonry - Slip forming - Smalley (excavator), Smalley - Snecked masonry - Soft story building - Soil cement - Solid ground floor - Sorel cement - Spackling paste - Spirit level - Split-level home - Spray painting - Stack effect - Staff (building material), Staff - Staffordshire blue brick - Staggered truss system - Staircase jig - Stair tread - Stairs - Stamped asphalt - Stamped concrete - Steam shovel - Steeplejack - Sticky rice mortar - Stonemason's hammer - Storey pole - Storm drain - Storm window - Steel building - Steel fixer - Steel frame - Steel plate construction - Stone carving - Stone sealer - Stone veneer - Storey - Strand jack - Strap footing - Straw-bale construction - Strength of materials - Strongback (girder), Strongback - Structural building components - Structural channel - Structural clay tile - Structural drawing - Structural engineering - Structural insulated panel - Structural integrity and failure - Structural material - Structural robustness - Structural steel - Structure relocation - Strut channel - Stucco - Submerged arc welding - Submittals (construction), Submittals - Subsidence - Substructure (engineering), Substructure - Suction excavator - Suicide bidding - Sulfur concrete - Superadobe - Superinsulation - Superintendent (construction), Superintendent - Surfaced block - Survey stakes - Sustainability in construction - Sustainable flooring - Sustainable refurbishment


T

T-beam - Tabby concrete - Table saw - Tar paper - Teardown (real estate), Teardown - Telescopic handler - Temperley transporter - Temporary fencing - Tented roof - Terraced house - Tetrapod (structure), Tetrapod - Textile-reinforced concrete - Thatching - Thermal bridge - Thermal insulation - Thinset - Thin-shell structure - Three-decker (house), Three-decker - Tie (cavity wall), Tie - Tie down hardware - Tile - Tilt slab - Tilt up - Timber - Timber framing - List of timber framing tools, Timber framing tools - Timber pilings - Timber recycling - Timber roof truss - Tin ceiling - Tiocem - Toe board - Topping out - Townhouse - Tracked loader - Traditional Korean roof construction - Transite - Treadwheel crane - Trench shield - Trencher (machine), Trencher - Trenchless technology - Truss - Tube and clamp scaffold - Tuckpointing - Tunnel boring machine - Tunnel construction - Tunnel hole-through - Tunnel rock recycling - Twig work - Types of concrete


U

Umarell - Uncertainties in building design and building energy assessment - Underfloor air distribution - Underground construction - Underpinning - Unfinished building - Uniclass - Uniformat


V

Verify in field - Vertical damp proof barrier - Vibro stone column - Vinyl composition tile - Vinyl siding - Virtual design and construction - Vitrified tile - Voided biaxial slab - Volumetric concrete mixer


W

Waffle slab - Walking excavator - Wall - Wall chaser - Wall footing - Wall plan - Wall stud - Water–cement ratio - Water heating - Water level (device), Water level - Waterproofing - Wattle and daub - Wearing course - Weathering steel - Weatherization - Weld access hole - Welded wire mesh - Welder - Welding - Welding power supply - Wheel tractor-scraper - White Card - Window capping - Window insulation film - Window well cover - Wiring closet - Wood-plastic composite - Wood shingle - Wool insulation - Wrecking ball - Wrought iron


X

Xbloc


Y


Z

Zellij - Zero-energy building - Zome


See also

* Outline of construction * Glossary of British bricklaying * Glossary of construction cost estimating * List of building materials * List of building types * List of buildings * List of construction methods * List of construction trades * List of roof shapes {{Index footer Construction, * Building engineering, * Wikipedia indexes, Construction topics