Underwater Work

Underwater work is work done underwater, generally by divers during diving operations, but includes work done underwater by remotely operated underwater vehicles and crewed submersibles.

Underwater work is the activity required to achieve the purpose of the diving operation additional to the activities required for safe diving in the specific underwater environment of the worksite, including finding and identifying the workplace, and where necessary, making it safe to do the planned work. Some of these activities have a wide range of applications in work suitable for a given diving mode, and are likely to be considered basic skills and learned during professional diver training programmes for the relevant mode. Others are specialist skils and are more likely to be learned on the job or on skills training programmes not directly related to diving.

Occupational diving fields

There are several occupational specialty fields in occupational diving, and the work done in them may overlap.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
* (such as abalone, scallops, lobster)
*
*
*
*
*
*

Work skills commonly used in professional diving occupations

There are several kinds of skill that may be needed in underwater work by occupational divers in various fields, and are often learned during entry level training.

Underwater navigation

*Pilotage involves navigation by naturally observable landmarks and phenomena, such as sunlight, water movement, bottom composition (for example, sand ripples run parallel to the direction of the wave front, which tends to run parallel to the shore), bottom contour and noise. Although natural navigation is taught on courses, developing the skills is generally more a matter of experience.
* Compass navigation is a matter of training, practice and familiarity with the use of underwater compasses, combined with various techniques for reckoning distance underwater, including kick cycles (one complete upward and downward sweep of a kick), time, and occasionally by actual measurement, which may involve the length of umbilical deployed. Kick cycles depend on the diver's finning technique and equipment, but are generally more reliable than time, which is critically dependent on speed. Techniques for direct measurement also vary, from the use of calibrated distance lines or surveyor's tape measures, to a mechanism like an impeller log, to pacing off the distance along the bottom with the arms.
*Use of a guide line or jackstay. A guide line may be laid to facilitate navigation to and from the underwater workplace. This allows divers to travel to and from the workplace with minimal delay, even in poor visibility. A jackstay serves the same purpose in heavy duty format.

Underwater searches

Underwater searches are procedures to find a known or suspected target object or objects in a specified search area under water. They may be carried out underwater by divers, crewed submersibles, remotely operated underwater vehicles, or autonomous underwater vehicles, or from the surface by other agents, including surface vessels, aircraft and cadaver dogs.

A search method attempts to provide full coverage of the search area. This is greatly influenced by the width of the sweep which largely depends on the method used to detect the target. For divers in conditions of zero visibility this is as far as the diver can feel with his hands while proceeding along the pattern. When visibility is better, it depends on the distance at which the target can be seen from the pattern, or detected by sonar or magnetic field anomalies. In all cases the search pattern should completely cover the search area without excessive redundancy or missed areas. Overlap is needed to compensate for inaccuracy and sensor error, and may be necessary to avoid gaps in some patterns.

*Diver searches:
**
**
**
***
**
***Spiral box search
***Compass grid search
***Ladder search
***Swim-line search
**
**
**Searches using hand held submersible sonar transponders
**
**
*Searches by submersibles, remotely operated vehicles and autonomous underwater vehicles
*Searches by surface vessels
*Searches by aircraft
*Searches from the shore

Rigging and lifting

Most underwater rigging uses equipment and techniques common to rigging in other environments, except for the common use of buoyant lifting underwater, and the equipment designed and used specifically for that purpose.
*Basic ropework, knots and splices, tackle
*Rigging slings cargo nets and spreaders, lifting hooks and shackles
* Lifting bags (variable buoyancy lifting equipment)
* Chain blocks, tirfors and pullers

Inspection, measuring and recording

*
*
*
*
*
*
*

Use of basic hand tools

*Hacksaws
*Hammers
*Cold chisels
*Pliers
*levers, wedges and crowbars
*Screwdrivers and wrenches
* Pipecutters and bolt cutters

Underwater inspection

Inspection of underwater structures, installations, and sites is a common diving activity, applicable to planning, installation, and maintenance phases, but the required skills are often specific to the application. Much use is made of video and still photographic evidence, and live video to allow direction of the inspection work by the supervisor and topside specialists. Inspections may also involve surface preparation, often by cleaning, and non-destructive testing. Tactile inspection may be appropriate where visibility is poor.

Typed of underwater work and the related specialist occupations

*Erecting formwork (shuttering) and reinforcing steel for casting concrete. (civils)
* Underwater concrete placement using a tremie, concrete pump, skip, bagwork or toggle bags (civils)
* Oxy-arc cutting (salvage, ships husbandry, offshore)
* Underwater welding (salvage, ships husbandry, offshore)
*Use of pneumatic and hydraulic power tools (ships husbandry, civils, offshore, salvage}
*High pressure jetting (ships husbandry, civils, offshore)
* Hydraulic bolt-tensioning (offshore oil and gas)
*Fitting and maintenance of wellhead components (offshore oil and gas)
* Hull cleaning and inspection (ships husbandry)
*Mooring inspection and maintenance (ships husbandry, offshore)
* Pipeline inspection (offshore oil and gas)
*Propeller polishing (ships husbandry)
*Inspection and replacement of cathodic protection anodes (ships husbandry, offshore)
* Underwater demolition (clearance, civils)
*Bomb disposal (military, public safety)
*Archaeological excavation (archaeology)
* Search and recovery (public safety)
*Forensic evidence collection and preservation (police)
*Search and rescue (public safety, police)
*Site surveys and mapping (scientific, archaeology)
* Biological sampling and tagging (scientific)
*Geological and chemical sampling and specimen collection (scientific).
* Core drilling (scientific)
*Setting up and recovery of instrumentation (scientific)
* Transect and quadrat surveys (scientific)
* Photography and videography (media, scientific, archaeology, inspection)

Gallery

File:970216-N-3093M-002 Underwater Construction Training.jpg, Underwater construction training
File:Arbeitstaucher bei Industrietaucharbeiten.jpg, Industrial inspection
File:Buceador en hélice.jpg, Inspecting a thruster grating
File:Coral-drilling hg.jpg, Core-drilling coral
File:Buzos con globos de elevación.JPG, Lifting bags
File:Buzos con cemento.jpg, Placing concrete underwater
File:Buzo junto toma de aspiración del buque.jpg, Inspecting an intake grating
File:ROV working on a subsea structure.jpg, ROV working on a subsea structure
File:US Navy 011105-N-3093M-011 Navy deep sea diver.jpg, Salvage work
File:Ultrasonidos.jpg, Ultrasonic testing
File:Inspeccion mediante corrientes.jpg, Non-destructive testing by measuring electrical current
File:US Navy 080624-N-5329L-290 U.S. Army Staff Sergeant David Gills, assigned to the 86th Engineering Dive Team, attaches a line on a wire rope that is attached to the sunken former Soviet submarine Juliett 484.jpg, Rigging
File:US Navy 051206-N-0879R-005 A U.S. Navy diver uses a scrubber to clean the hull of the Los Angeles-class fast attack submarine USS Key West (SSN 722).jpg, Hull scrubbing
File:US Navy 080724-N-3093M-019 Senior Chief Diver Billy Gilbert, assigned to Mobile Diving and Salvage Unit (MDSU) 2, uses a pipe wrench to remove a damaged propeller on a small patrol boat.jpg, Removing a small propeller
File:US Navy 110520-N-VF350-023 Navy Diver 2nd Class Joshua Westman sucks sand off the bottom of the ocean during a Joint POW-MIA Accounting Command (JP.jpg, Removing sediment with a suction pump
File:US Navy 110608-N-XD935-079 Navy Diver 2nd Class Justin McMillen holds the lift line as Ordinary Seaman Romando Thomas fills air into a lift bag.jpg, Filling a lift bag

References

{{Underwater diving, prodiv