Uintvar Coding

A variable-length quantity (VLQ) is a universal code that uses an arbitrary number of binary octets (eight-bit bytes) to represent an arbitrarily large integer. A VLQ is essentially a base-128 representation of an unsigned integer with the addition of the eighth bit to mark continuation of bytes. VLQ is identical to LEB128 except in endianness. See the example below.

Applications and history

Base-128 compression is known by many namesVB (Variable Byte), VByte, Varint, VInt, EncInt etc.Jianguo Wang; Chunbin Lin; Yannis Papakonstantinou; Steven Swanson
"An Experimental Study of Bitmap Compression vs. Inverted List Compression"
.
2017.
.

A variable-length quantity (VLQ) was defined for use in the standard MIDI file formatMIDI File Format: Variable Quantities
to save additional space for a resource-constrained system, and is also used in the later Extensible Music Format (XMF).

Base-128 is also used in ASN.1 BER encoding to encode tag numbers and object identifiers. It is also used in the WAP environment, where it is called variable length unsigned integer or uintvar. The DWARF debugging format defines a variant called LEB128 (or ULEB128 for unsigned numbers), where the least significant group of 7 bits is encoded in the first byte, and the most significant bits are in the last byte (so effectively it is the little-endian analog of a VLQ). Google Protocol Buffers use a similar format to have compact representation of integer values, as does Oracle Portable Object Format (POF) and the Microsoft .NET Framework "7-bit encoded int" in the BinaryReader and BinaryWriter classes.

It is also used extensively in web browsers for source mapping – which contain a lot of integer line and column number mappings – to keep the size of the map to a minimum.Introduction to javascript source maps

Variable-width integers in LLVM use a similar principle. The encoding chunks are little-endian and need not be 8 bits in size. The LLVM documentation describes a field that uses 4-bit chunk, with each chunk consisting of 1 bit continuation and 3 bits payload.

Benefits

#Compactness: One of the primary benefits of VLQ encoding is its compactness. Since it uses a variable number of bytes to encode an integer, smaller integers can be represented using fewer bytes, resulting in a smaller overall file size. This is particularly useful in scenarios where storage space is at a premium, such as in embedded systems or mobile devices.
#Efficiency: VLQ encoding is an efficient way to store and transmit data. Since smaller integers are represented using fewer bytes, this reduces the amount of data that needs to be transmitted, which in turn reduces the time and bandwidth required to transmit the data.
#Flexibility: Another advantage of VLQ encoding is its flexibility. Since the number of bytes used to represent an integer is based on its magnitude, VLQ encoding can handle integers of different sizes. This means that VLQ encoding can be used to represent integers of any size, from small 8-bit integers to large 64-bit integers.

General structure

The encoding assumes an octet (an 8-bit byte) where the most significant bit (MSB), also commonly known as the sign bit, is reserved to indicate whether another VLQ octet follows.

If ''A'' is 0, then this is the last VLQ octet of the integer. If ''A'' is 1, then another VLQ octet follows.

''B'' is a 7-bit number x00, 0x7F and ''n'' is the position of the VLQ octet where ''B''₀ is the least significant. The VLQ octets are arranged most significant first in a stream.

Variants

The general VLQ encoding is simple, but in basic form is only defined for unsigned integers (nonnegative, positive or zero), and is somewhat redundant, since prepending 0x80 octets corresponds to zero padding. There are various signed number representations to handle negative numbers, and techniques to remove the redundancy.

Group Varint Encoding

Google developed Group Varint Encoding (GVE) after observing that traditional VLQ encoding incurs many CPU branches during decompression. GVE uses a single byte as a header for 4 variable-length uint32 values. The header byte has 4 2-bit numbers representing the storage length of each of the following 4 uint32s. Such a layout eliminates the need to check and remove VLQ continuation bits. Data bytes can be copied directly to their destination. This layout reduces CPU branches, making GVE faster than VLQ on modern pipelined CPUs.

PrefixVarint is a similar design but with a uint64 maximum. It is said to have "been invented multiple times independently". It is possible to be changed into a chained version with infinitely many continuations.

Signed numbers

Sign bit

Negative numbers can be handled using a sign bit, which only needs to be present in the first octet.

In the data format for Unreal Packages used by the Unreal Engine, a variable-length quantity scheme called Compact Indices is used. The only difference in this encoding is that the first VLQ octet has the sixth bit reserved to indicate whether the encoded integer is positive or negative. Any consecutive VLQ octet follows the general structure.

If ''A'' is 0, then this is the last VLQ octet of the integer. If ''A'' is 1, then another VLQ octet follows.

If ''B'' is 0, then the VLQ represents a positive integer. If ''B'' is 1, then the VLQ represents a negative number.

''C'' is the number chunk being encoded, and ''n'' is the position of the VLQ octet where ''C''₀ is the least significant. The VLQ octets are arranged least significant first in a stream.

Zigzag encoding

An alternative way to encode negative numbers is to use the least significant bit for sign. This is notably done for Google Protocol Buffers, and is known as a zigzag encoding for signed integers. One can encode the numbers so that encoded 0 corresponds to 0, 1 to −1, 10 to 1, 11 to −2, 100 to 2, etc.: counting up alternates between nonnegative (starting at 0) and negative (since each step changes the least-significant bit, hence the sign), whence the name "zigzag encoding". Concretely, transform the integer as (n << 1) ^ (n >> k - 1) for fixed ''k''-bit integers.

Two's complement

LEB128 uses two's complement to represent signed numbers. In this scheme of representation, ''n'' bits encode a range from −2^''n'' to 2^''n'' − 1, and all negative numbers start with a 1 in the most significant bit. In Signed LEB128, the input is sign-extended so that its length is a multiple of 7 bits. From there the encoding proceeds as usual.

In LEB128, the stream is arranged least significant first.

Removing redundancy

With the VLQ encoding described above, any number that can be encoded with N octets can also be encoded with more than N octets simply by prepending additional 0x80 octets as zero-padding. For example, the decimal number 358 can be encoded as the 2-octet VLQ 0x8266, or the number 0358 can be encoded as 3-octet VLQ 0x808266, or 00358 as the 4-octet VLQ 0x80808266 and so forth.

However, the VLQ format used in Git removes this prepending redundancy and extends the representable range of shorter VLQs by adding an offset to VLQs of 2 or more octets in such a way that the lowest possible value for such an (''N'' + 1)-octet VLQ becomes exactly one more than the maximum possible value for an ''N''-octet VLQ. In particular, since a 1-octet VLQ can store a maximum value of 127, the minimum 2-octet VLQ (0x8000) is assigned the value 128 instead of 0. Conversely, the maximum value of such a 2-octet VLQ (0xFF7F) is instead of just . Similarly, the minimum 3-octet VLQ (0x808000) has a value of instead of zero, which means that the maximum 3-octet VLQ (0xFFFF7F) is instead of just .

In this way, there is one and only one encoding of each integer, making this a base-128 bijective numeration.

Examples

Here is a worked-out example for the decimal number 137:
* Represent the value in binary notation (e.g. 137 as 10001001)
* Break it up in groups of 7 bits starting from the lowest significant bit (e.g. 137 as 0000001 0001001). This is equivalent to representing the number in base 128.
* Take the lowest 7 bits, and that gives you the least significant byte (0000 1001). This byte comes last.
* For all the other groups of 7 bits (in the example, this is 000 0001), set the MSb to 1 (which gives 1000 0001 in our example). Thus 137 becomes 1000 0001 0000 1001, where the bits in boldface are something we added. These added bits denote whether there is another byte to follow or not. Thus, by definition, the very last byte of a variable-length integer will have 0 as its MSb.

Another way to look at this is to represent the value in base-128 and then set the MSB of all but the last base-128 digit to 1.

The Standard MIDI File format specification gives more examples:Standard MIDI-File Format Spec. 1.1

References

External links

MIDI Manufacturers Association
(MMA) - Source for English-language MIDI specs

{{Webarchive, url=https://web.archive.org/web/20100117000729/http://www.amei.or.jp/index_e.html , date=2010-01-17 (AMEI) -Source for Japanese-language MIDI specs

Data types
MIDI