Traverse (cave Diving)

Cave-diving is underwater diving in water-filled caves. It may be done as an extreme sport, a way of exploring flooded caves for scientific investigation, or for the search for and recovery of divers or, as in the 2018 Thai cave rescue, other cave users. The equipment used varies depending on the circumstances, and ranges from breath hold to surface supplied, but almost all cave-diving is done using scuba equipment, often in specialised configurations with redundancies such as sidemount or backmounted twinset. Recreational cave-diving is generally considered to be a type of technical diving due to the lack of a free surface during large parts of the dive, and often involves planned decompression stops. A distinction is made by recreational diver training agencies between cave-diving and cavern-diving, where cavern diving is deemed to be diving in those parts of a cave where the exit to open water can be seen by natural light. An arbitrary distance limit to the open water surface may also be specified.

Equipment, procedures, and the requisite skills have been developed to reduce the risk of becoming lost in a flooded cave, and consequently drowning when the breathing gas supply runs out. The equipment aspect largely involves the provision of an adequate breathing gas supply to cover reasonably foreseeable contingencies, redundant dive lights and other safety critical equipment, and the use of a continuous guideline leading the divers back out of the overhead environment. The skills and procedures include effective management of the equipment, and procedures to recover from foreseeable contingencies and emergencies, both by individual divers, and by the teams that dive together.

In the United Kingdom, cave-diving developed from the locally more common activity of caving. Its origins in the United States are more closely associated with recreational scuba diving. Compared to caving and scuba diving, there are relatively few practitioners of cave-diving. This is due in part to the specialized equipment and skill sets required, and in part because of the high potential risks due to the specific environment.

Despite these risks, water-filled caves attract scuba divers, cavers, and speleologists due to their often unexplored nature, and present divers with a technical diving challenge. Underwater caves have a wide range of physical features, and can contain fauna not found elsewhere. Several organisations dedicated to cave diving safety and exploration exist, and several agencies provide specialised training in the skills and procedures considered necessary for acceptable safety.

Environments

Two types of overhead diving environment are defined in recreational cave diving: Both a cave or a cavern are natural voids under the Earth's surface.

The formation and development of caves, known as ''speleogenesis'', can occur over the course of millions of years. Caves can vary considerably in size, and are formed by various geological processes. These may involve a combination of chemical processes, erosion by water, tectonic forces, microorganisms, pressure, and atmospheric influences.

Most caves are formed in limestone by dissolution. Caves can be classified in various ways, including a contrast between active and relict, where active caves have water flowing through them and relict caves do not, though water may be retained in them. Types of active caves include inflow caves ("into which a stream sinks"), outflow caves ("from which a stream emerges"), and through caves ("traversed by a stream"). In speleology, a cavern is an enlarged space within a cave, but in cave diving a different use of the terms is common, where cavern implies visual proximity to an exit.

Cave

The underwater cave environment includes those parts of caves which may be explored underwater. Recreational cave diving can be defined as diving underground beyond the reach of natural daylight, as a way of distinguishing between cave and cavern diving. In this context, while artificially formed underground spaces such as mines are not generally called caves by divers, the activity of diving in them is classed as cave diving for training and certification purposes by diver training agencies.

Cavern

Cavern diving is an arbitrarily defined, limited scope activity of diving in the naturally illuminated part of underwater caves, where the risk of getting lost is small, as the exit can be seen, and the equipment needed is reduced due to the limited distance to surface air. It is defined as a recreational diving activity as opposed to a technical diving activity on the grounds of low risk and basic equipment requirements.

Procedures

The procedures of cave-diving have much in common with procedures used for other types of penetration diving. They differ from open-water diving procedures mainly in the emphasis on navigation, gas management, operating in confined spaces, and that the diver is physically constrained from direct ascent to the surface during much of the dive.

As most cave-diving is done in an environment where there is no free surface with breathable air allowing an above-water exit, it is critically important to be able to find the way out before the breathing gas runs out. This is ensured by the use of a continuous guideline between the dive team and a point outside of the flooded part of the cave, and diligent planning and monitoring of gas supplies. Two basic types of guideline are used: permanent lines, and temporary lines. Permanent lines may include a main line starting near the entrance/exit, and side lines or branch lines, and are marked to indicate the direction along the line to the nearest exit. Temporary lines include exploration lines and jump lines.

Decompression procedures may take into account that the cave diver usually follows a very rigidly constrained and precisely defined route, both into and out of the cave, and can reasonably expect to find any equipment such as drop cylinders temporarily stored along the guideline while making the exit. In some caves, changes of depth of the cave along the dive route will constrain decompression depths, and gas mixtures and decompression schedules can be tailored to take this into account.

Skills

Most open-water diving skills apply to cave-diving, and there are additional skills specific to the environment, and to the chosen equipment configuration.
*Good buoyancy control, trim and finning technique help preserve visibility in areas with silt deposits. The ability to reverse kick to back out of restrictions where there is no space to turn around is useful.
**Finning skills: Frog kick, which avoids up- and downward directed vortices and are less likely to disturb silt on the bottom or loose material on the ceiling, and modified frog kick, a version which is more suited to narrow spaces; modified flutter kick, a version of flutter kick which minimises downward directed vortices; back kick, which produces thrust towards the feet, used to move backwards along the long axis of the diver, and helicopter turns, which rotate the diver on the spot around a vertical axis, using lower leg and ankle movements.
*The ability to navigate in total darkness using the guideline to find the way out is a safety critical emergency skill. Line management skills required for cave-diving include laying and recovering guide lines using a reel, tie-offs, the use of a jump line to cross gaps or find a lost guide line in silted out conditions, identifying the direction along the guideline leading to the exit, and the skills of dealing with a break in a guideline.
*Emergency skills for dealing with gas supply problems are complicated by the possibility of the emergency occurring in a confined space and low visibility or darkness, and at a considerable horizontal distance from a free surface to the atmosphere.
*Communicating by touch and light signals.
*Providing and receiving emergency breathing gas while swimming through narrow spaces.

Line management

The essential cave-diving procedure is navigation using a guide line. This includes laying and marking line, following line and interpreting line markers, avoiding entanglement, recovering from entanglement, maintaining and repairing line, finding lost line, jumping gaps, and recovering line, any of which may need to be done in zero visibility, total darkness, tight confined spaces or a combination of these conditions.
*Laying a cave line: the procedure of running line (unreeling line under light tension as one advances) to avoid snagging on the diver and so that it runs fairly straight between s, placing the line so it can all be seen and reached, so it can be followed in good or bad visibility, avoiding s, and securing the line sufficiently at suitable places to keep it in position.
**Making placements - securing the guideline as it is being run and the choice of primary and secondary tie offs.
**Temporary line – line that is laid on the way into parts of a cave without permanent line, and recovered to the reel on the way out.
**Permanent line – line that is thicker, and therefore easier to see, stronger, and more abrasion resistant, and more securely fastened, intended to be left in place for use by other divers. It may be secured to placements at closer intervals to facilitate finding the other end and reconnection in case of a break. It is not recovered during exit, and will generally be marked.
*** is heavy duty permanent guide line of a bright yellow colour and kernmantle construction that leads to the exit. The colour was chosen to make the line more easily identifiable while remaining highly visible, and a heavier duty line also helps in identification by feel and makes the line more durable. In some regions the consensus among cave diving professionals is to reserve gold line for cavern areas which are used for tours. In some cases the gold line extends to the naturally illuminated zone, while in others it will start inside the dark zone, to avoid tempting incompetent and inadequately equipped divers from following the line into the cave.
*Marking line: Permanent line is marked to indicate the direction to the nearest exit, and to indicate where dive teams have passed but have not yet returned by looping the line onto a line marker, ensuring that a directional marker points in the correct direction, and that all markers are sufficiently securely attached, while remaining easily removable if temporary.
**Directional markers - cave arrows used to indicate the way out along the line.
**Personal markers – cookies – temporary markers to indicate that a diver has passed beyond a point but has not returned yet, particularly where the group leaves the permanent line or makes a jump to a secondary permanent (branch) line. A personal directional marker may be attached to a line to indicate that the owner has gone in that direction, which can happen after divers are separated if one finds the line but not the other divers, and decides to exit independently.
*Following a line – the skills of navigating back out of a cave using the line as a guide, particularly in the dark and low visibility.
*Finding a lost line: although cave-diving procedures are intended to minimize the risk of losing the guide line, it can happen, and as the chance of finding one's way out without the line are drastically reduced, losing the line is considered a life-threatening situation, and the diver must be competent in the methods for relocating the line in all reasonably foreseeable circumstances, which include a bad silt-out, total darkness, and loss of contact with the other divers in the team. Methods of search should prevent the diver from drifting away from the vicinity of the line, so the start position for the search should be secured by tying off a search line. In principle, if the diver feels their way around the cross section of the cave orthogonal to the line direction until they get back to the starting point, the guideline should be either found directly, or be within the loop of the search line, but even this is not guaranteed to work, as the shape of the cave and limited breathing gas supplies could make this impossible.
*Fixing a line break, This requires the ability to tie reliable knots, which may have to be done in bad visibility. It also requires the diver to find the other end of the break. On the way into a cave a line break is an inconvenience, as if the other side cannot be found, the divers can still find their way out. On the way out a line break is a life-threatening emergency until the other end is found, as gas supply is limited and there is no infallible way to find the other end while there is enough gas to complete the exit.
*Jumping a gap to a branch line – this involves tying off to the permanent line in a way that is unlikely to come loose, but may be released quickly on the return. Passing a loop on the end of the jump line round the permanent line and over the reel is a standard method. A tag on the end of the loop helps release it quickly. This method cannot be inadvertently released by other divers following the main line.
*Recovering temporary line – this is done by the last diver in line on the way out, so the others can follow the line out of the cave, even in reduced visibility, without risking losing the line. They may prepare the line for the reel operator, by releasing tie-offs, which cuts down on delays. In an emergency exit the reel and line may be temporarily abandoned, as it can be retrieved later. The reel operator keeps a light tension on the line and tries to keep it evenly distributed over the width of the reel while winding in. The divers further ahead on the line can feel the presence of others behind them by line tension and small movements of the line as it is reeled in.

Lost line

Losing the guide line in a cave is a potentially life-threatening emergency. While following recommended best practice makes it highly unlikely that a diver will lose the line, it can and does happen, and there are procedures which will usually work to find it again. Any reliable information on where the diver is likely to be relative to the last known position of the line may be critical, and the procedure of choice will depend on what is reliably known. In all situations, the diver will attempt to stabilise the situation and avoid getting further lost, and make a thorough visual check in all directions from where they are at the time, taking into account the possibility of the line being in a line trap. If the diver has not also separated from their buddy, the buddy may know where the line is, and can be asked, and if the diver is separated from their buddy, the buddy may be at the line, and the buddy's light may be visible.

Stabilising the position is generally done by finding the nearest feasible tie-off point and securely tying off a search line. The direction of the guide line when last seen should be known, and therefore the direction the diver was swimming in before losing the line. If the diver was neutrally buoyant while following the line, the approximate depth can be reconstructed by finding the depth of neutral buoyancy again, without adjusting inflation of BCD or dry suit. Unless the line was lost by the diver not noticing a change of direction, it is likely to be at much the same depth, in much the same direction, and at a similar lateral and vertical distance as when last seen, making it logical to try that direction first. While swimming towards the estimated position of the line and slowly paying out search line, the diver will search visually, and in low visibility or darkness, also by feel, making arm sweeps across the expected direction of the line, while defending the head from impact with the other arm. The distance swum towards the estimated position of the lost line can be measured by the spacing and number of knots paid out on the search line. If the search fails, the diver will return to the tie off and try again in the next best guess for the direction the line may be. The diver may also choose to try a different search method. The best search method for any given situation will depend on the water conditions, the layout of the section of cave, the way the line was laid, the situational knowledge and skills of the diver, and the equipment available – a method that would be ideal for one situation might not work at all for another.

If the line is found, but not the other divers, the diver can tie off their search reel to the guide line as an indicator to other members of the team that they were lost but have found the guide line, and indicate the direction that they intend to proceed along the guideline with a personal directional marker so that others who see it while searching for the lost diver will know whether the diver chose the right direction to exit the cave.

Lost buddy

This is generally the converse situation to the lost guide line, in that the diver loses contact with their buddy or team but remains in contact with the guide line, so is not themselves lost. Their first priority is to not get lost or disorientated, and in furtherance of this aim would attach a directional line marker to the guide line indicating the direction to the exit before starting a search. The search line can be tied to the directional marker to prevent it from sliding along the line during the search. The direction for the search would depend on the layout of that part of the cave, and where the missing diver should have been in the group. The search party must consider their own safety first, regarding how much gas they can afford to use in a search, which will depend on the stage of the dive when the diver is noticed to be missing. When searching in darkness, the searchers should periodically turn off their lights as this will allow them to see the lost diver's light more easily.

Gas planning and management

Gas planning is the aspect of dive planning which deals with the calculation or estimation of the amounts and mixtures of gases to be used for a planned dive profile. It usually assumes that the dive profile, including decompression, is known, but the process may be iterative, involving changes to the dive profile as a consequence of the gas requirement calculation, or changes to the gas mixtures chosen. Use of calculated reserves based on planned dive profile and estimated gas consumption rates rather than an arbitrary pressure based on a fraction of the initial gas supply is sometimes referred to as rock bottom gas management. The purpose of gas planning is to ensure that for all reasonably foreseeable contingencies, the divers of a team have sufficient breathing gas to safely return to a place where more breathing gas is available. In almost all cases this will be the surface.

Gas planning includes the following aspects:
* Choice of breathing gases to suit the depth at which they will be used,
* Choice of scuba configuration, to conveniently carry the gas, or store it at stage points along the route
* Estimation of gas quantities required for the planned dive, including , , and decompression gases, as appropriate to the profile.
* Estimation of gas quantities for reasonably foreseeable contingencies. Under stress it is likely that a diver will increase breathing rate and decrease swimming speed. Both of these lead to a higher gas consumption during an emergency exit or ascent.
* Choice of cylinders to carry the required gases. Each cylinder volume and working pressure must be sufficient to contain the required quantity of gas.
* Calculation of the pressures for each of the gases in each of the cylinders to provide the required quantities.
* Specifying the critical pressures of relevant gas mixtures for appropriate stages (waypoints) of the planned dive profile (gas matching).
The primary breathing apparatus may be open circuit scuba or rebreather, and bailout may also be open circuit or rebreather. Emergency gas may be shared among the team members, or each diver may carry their own, but in all cases each diver must be able to bail out onto a gas supply of their own for long enough to get to the next planned source of emergency gas. If for any reason this situation no longer applies, there is a single point of critical failure, and the risk becomes unacceptable, so the dive should be turned.

Gas management also includes the blending, filling, analysing, marking, storage, and transportation of gas cylinders for a dive, and the monitoring and switching of breathing gases during a dive, and the provision of emergency gas to another member of the dive team. The primary aim is to ensure that everyone has enough to breathe of a gas suitable for the current depth at all times, and is aware of the gas mixture in use and its effect on decompression obligations and oxygen toxicity risk.

Gas management rules of thumb

The rule of thirds for gas management is a rule of thumb used by divers to plan dives so they have enough breathing gas remaining in their diving cylinder at the end of the dive to be able to complete the dive safely. This rule mostly applies to diving in overhead environments, such as caves and wrecks, where a direct ascent to the surface is impossible and the divers must return the way they came.

For divers following the rule, one third of the gas supply is planned for the outward journey, one third is for the return journey and one third is a safety reserve. However, when diving with a buddy with a higher breathing rate or a different volume of gas, it may be necessary to set one third of the buddy's gas supply as the remaining 'third'. This means that the turn point to exit is earlier, or that the diver with the lower breathing rate carries a larger volume of gas than he alone requires.

A different option for penetration dives is the Half + 15 bar (half + 200 psi) method, in which the contingency gas for the stage is carried in the primary cylinders. Some divers consider this method to be the most conservative when multi-staging. If all goes to plan when using this method, the divers surface with stages nearly empty, but with all the contingency gas still in their primary cylinders. With a single stage drop, this means the primary cylinders will still be about half-full.

Special cases

*High flow sinks. Gas planning is more complicated when the flow in the cave opposes the diver on the exit, as it is then not reasonable to assume that the amount of gas needed for the exit is equal to the amount used for the entry, and the rule of thirds does not apply. A significantly larger reserve will be needed, and the turn pressure will be higher.
*Complex traverses
*Complex circuits

Training

Cave-diving training includes equipment selection and configuration, guideline protocols and techniques, gas management protocols, communication techniques, propulsion techniques, emergency management protocols, and psychological education. Cave diver training also stresses the importance of risk management and cave conservation ethics. Most training systems offer progressive stages of education and certification.

*Cavern training covers the basic skills needed to enter the overhead environment. Training will generally consist of gas planning, propulsion techniques needed to deal with the silty environments in many caves, reel and handling, and communication. Once certified as a cavern diver, a diver may undertake cavern diving with a cavern or cave certified "buddy", as well as continue into cave-diving training.
*Introduction into cave training builds on the techniques learned during cavern training and includes the training needed to penetrate beyond the cavern zone and working with permanent guidelines that exist in many caves. Once intro to cave certified, a diver may penetrate much further into a cave, usually limited by 1/3 of a single cylinder, or in the case of a basic cave certification, 1/6 of double cylinders. An intro cave diver is usually not certified to do complex navigation.
*Apprentice cave training serves as the transition from intro to full certification and includes the training needed to penetrate deep into caves working from permanent guide lines as well as limited exposure to side lines that exist in many caves. Training covers complex dive planning and decompression procedures used for longer dives. Once apprentice certified, a diver may penetrate much further into a cave, usually limited by 1/3 of double cylinders. An apprentice diver is also allowed to do a single jump or gap (a break in the guideline from two sections of mainline or between mainline and sideline) during the dive. An apprentice diver typically has one year to finish full cave or must repeat the apprentice stage.
*Full cave training serves as the final level of basic training and includes the training needed to penetrate deep into the cave working from both permanent guidelines and sidelines, and may plan and complete complex dives deep into a system using decompression to stay longer. Once cave certified, a diver may penetrate much further into a cave, usually limited by 1/3 of double cylinders. A cave diver is also certified as competent to do multiple jumps or gaps (a break in the guideline from two sections of mainline or between mainline and sideline) during the dive.
* Further training may be available in skills for cave surveying and mapping.

Certification

Various diver training and certification organizations offer training for cave divers, often based on the three cave zones defined by CMAS. Some organizations offer cavern diving training for recreational divers, (Zone 1). Cave diving involves significant risks, so a self-taught approach is discouraged.

The following training courses are offered by the listed organisations:

In France, courses organized by the national cave diving commission of the FFESSM, are offered to holders of level 2 certification or higher. The French Cave Diving School of the FFS also offers courses open to any autonomous diver.

Exploration, surveys and mapping

A significant aspect of cave diving by competent and enthusiastic cave divers is exploration, survey and mapping. Data collected is often shared and may be stored on databases to help optimise the effectiveness of such surveys, and make the information generally available.

Underwater cave mapping is complicated by both a lack of access to the surface for GPS positions, darkness, with short line-of-sight, and limited visibility, which complicate optical measurement. Altitude/depth is relatively simple as accurate depth measurement is available to divers in the form of decompression computers, which log a depth/time record of reasonable accuracy and are available for instantaneous readout at any point, and depth can be referenced to the altitude at the surface. Vertical dimensions can be directly measured or calculated as differences in depth.

Surface coordinates can be collected via GPS and remote sensing, with varying degrees of precision and accuracy depending on the type of entrance. In some caves the water surface is in view of GPS satellites, in others it is a considerable distance along a complex route from the nearest open air. Three dimensional models of varying accuracy and detail can be created by processing measurements collected by whatever methods were available. These can be used in virtual reality models. The usual methods for survey and mapping of underwater caves are dead reckoning and direct measurements of distance, compass direction and depth, by diving teams of two or three scuba divers, who record azimuth of the cave line, measurements of height, width, depth, and slope at intervals along the line, generally using a permanent guide line as a reference baseline, and take photographic records of features and objects of interest. Data are collected on and by digital photography. Hand-held sonar may be used for distance measurement where available. Where the depth or other constraints prevent divers from exploring in person, tethered and untethered remotely operated underwater vehicles (ROUVs) have been used effectively, using sonar technology to scan and map the surroundings, and video to record the appearance.

Features, artifacts, remains, and other objects of interest
are recorded in situ as effectively as possible, generally by photography.

Hazards

Cave-diving is one of the most challenging and potentially dangerous kinds of diving and presents many hazards. Cave-diving is a form of penetration diving, meaning that in an emergency a diver cannot swim vertically to the surface due to the cave's ceilings, and so must swim the entire way back out. The underwater navigation through the cave system may be difficult and exit routes may be at a considerable distance, requiring the diver to have sufficient breathing gas to make the journey. The dive may also be deep, resulting in potential deep diving risks.

Visibility can vary from nearly unlimited to low, or non-existent, and can go from very good to very bad in a single dive. While a less-intensive kind of diving called cavern diving does not take divers beyond the reach of natural light (and typically no deeper than ), and penetration not further than , true cave-diving can involve penetrations of many thousands of feet, well beyond the reach of sunlight. The level of darkness experienced creates an environment impossible to see in without an artificial source of light even if the water is clear. Caves often contain sand, mud, clay, silt, or other sediment that can further reduce underwater visibility in seconds when stirred up. Consequently, visibility is often worse during exit, and divers rely on the guideline for finding the way out.

The water in caves can have strong flow. Most caves flooded to the surface at the cave mouth are either springs or siphons. Springs have out-flowing currents, where water is coming up out of the Earth and flowing out across the land's surface. Siphons have in-flowing currents where, for example, an above-ground river is going underground. Some caves are complex and have some tunnels with out-flowing currents, and other tunnels with in-flowing currents. Inflowing currents can cause serious problems for the diver, as they make the exit more difficult, and the diver is carried to spaces that are unfamiliar and may be dangerous, while outflowing currents generally make the exit quicker and the diver is carried through places they have been before and can be prepared for difficult areas.

Cave-diving has been perceived as one of the more deadly sports in the world. This perception may be exaggerated because the majority of divers who have died in caves have either not undergone specialized training or have had inadequate equipment for the environment. Some cave divers have suggested that cave-diving is statistically much safer than recreational diving due to the much larger barriers imposed by experience, training, and equipment cost, but there is no definitive statistical evidence for this claim.

There is no reliable worldwide database listing all cave-diving fatalities. Such fractional statistics as are available, however, suggest that few divers have died while following accepted protocols and while using equipment configurations recognized as acceptable by the cave-diving community. In the very rare cases of exceptions to this rule there have typically been unusual circumstances.

Safety

Most cave divers recognize five general rules or contributing factors for safe cave-diving, which were popularized, adapted and became generally accepted from Sheck Exley's 1979 publication ''Basic Cave Diving: A Blueprint for Survival''. In this book, Exley included accounts of actual cave-diving accidents, and followed each one with a breakdown of what factors contributed to the accident. Despite the unique circumstances of each individual accident, Exley found that at least one of a small number of major factors contributed to each one. This technique for breaking down accident reports and finding common causes among them is now called ''accident analysis'', and is taught in introductory cave-diving courses. Exley outlined a number of these resulting cave-diving rules, but today these five are the most recognized:
*Training: A safety conscious cave diver does not intentionally exceed the scope of their training. Cave-diving is normally taught in stages, each successive stage focusing on more complex aspects of cave-diving. Each stage of training is intended to be reinforced with actual cave-diving experience to develop competence before starting training at a more complex level. Accident analysis of cave-diving fatalities has shown that academic training without sufficient real world experience is not always enough in the event of an underwater emergency. By systematically building experience the diver can develop the confidence, motor skills and reflexes to remain calm and apply the appropriate procedures in an emergency. An inexperienced diver is more likely to panic than an experienced diver when confronted with a similar situation, all other factors being equal. Experience in dealing successfully with real or simulated problems is of the greatest value, experience of dives where nothing goes wrong reinforces the skills used, but not the skills that were not needed but might be critical in an emergency. When trained to the highest available level, further competence can be developed by practice and gradual extension of range of experience.
*Guide line: A continuous guide line is maintained at all times between the leader of a dive team and a fixed point selected outside the cave entrance in open water. Often this line is tied off a second time as a backup directly inside the cavern zone. As the dive leader lays the guideline they take great care to ensure there is appropriate tension on the line, and that it does not go into line traps, tying off the line as necessary to keep it leading through a clear route. Other team members remain between the lead diver and the exit, in easy reach of the line at all times. If a silt out occurs, divers can find the line and follow it back to the cave entrance. Failure to use a continuous guide line to open water is cited as the most frequent cause of fatality among untrained, non-certified divers who venture into caves. Greater care to avoid line traps is required for laying permanent line, and more frequent tie-offs would be expected, as a permanent line is more susceptible to breaking over time.
*Depth rules: Gas consumption, nitrogen narcosis and decompression obligation increase with depth, and the effects of nitrogen narcosis may be more critical in a cave due to the high task loading and presence of combinations of hazards. Cave divers are advised not to dive to depths exceeding the planned depth and the applicable range of their equipment and the breathing gases in use, and to keep in mind this effective difference between open water depth and cave depth. Excessive depth is frequently cited as a contributory factor in fatal incidents involving fully trained cave divers.
* Breathing gas management: The breathing gas supply must last the diver until out of the overhead environment. There are several strategies for gas management. The most common protocol is the 'rule of thirds,' in which one third of the initial gas supply is used for ingress, one third for egress, and one third to support another team member in the case of an emergency. This is a very simple method, but is not always sufficient. UK practice is to adhere to the rule of thirds, but with an added emphasis on keeping depletion of the separate air systems "balanced", so that the complete loss of any single gas supply will still leave the diver with sufficient gas to return safely. The rule of thirds makes no allowance for increased air consumption that the stress caused by the loss of an air system may induce. Dissimilar tank sizes among the divers are also not allowed for by the rule of thirds, and a sufficient reserve should be calculated for each dive. UK practice is to assume that each diver is completely independent, as in a typical UK sump there is usually nothing that a buddy can do to assist a diver in trouble. Most UK cave divers dive solo. US sump divers follow a similar protocol. The rule of thirds was devised as an approach to diving Florida's caves – they typically have high outflow currents, which help to reduce air consumption when exiting. In a cave system with little or no outflow it is prudent to reserve more air than is provided by the rule of thirds.
*Lights: Each cave diver should have at least three independent sources of light. One is considered the primary and is intended for general use during the dive. The others are considered backup lights and may be lower powered as they are not intended for exploration. Each light must have an expected burn time of at least the planned duration of the dive. If any diver loses light function so that they have fewer than three working lights, protocol requires that the dive be aborted for all members of the dive team and that they immediately start the exit.

Most cave-diving fatalities are due to running out of gas before reaching the exit. This is often the direct consequence of getting lost, whether the guide line is found again or not, and whether the visibility deteriorates, lights fail, or someone panics. On rare occasions equipment failure is unrecoverable, or a diver becomes inextricably trapped, seriously injured, incapacitated by using an unsuitable gas for the depth, or swept away by strong flow. Getting lost means separation from the continuous guide line to the exit, and not knowing the direction to the exit.

Some cave divers are taught to remember the five key components with the mnemonic: "''The Good Divers Always Live''" (training, guide, depth, air, light).

In recent years new contributing factors were considered after reviewing accidents involving solo diving, diving with incapable dive partners, video or photography in caves, complex cave dives and cave-diving in large groups. With the establishment of technical diving, the use of mixed gases—such as trimix for bottom gas, and nitrox and oxygen for decompression—reduces the margin for error. Accident analysis suggests that breathing the wrong gas for the depth or not analyzing the breathing gas properly has also led to cave-diving accidents.

Cave-diving requires a variety of specialized procedures, and divers who do not correctly apply these procedures may significantly increase the risk to the members of their team. The cave-diving community works hard to educate the public on the risks they assume when they enter water-filled caves. Warning signs with the likenesses of the Grim Reaper

HOME


Content is Copyleft
Website design, code, and AI is Copyrighted (c) 2014-2017 by Stephen Payne


Consider donating to Wikimedia



As an Amazon Associate I earn from qualifying purchases