Steel Stringer

Steel is an alloy of iron and carbon that demonstrates improved mechanical properties compared to the pure form of iron. Due to steel's high elastic modulus, yield strength, fracture strength and low raw material cost, steel is one of the most commonly manufactured materials in the world. Steel is used in structures (as concrete reinforcing rods), in bridges, infrastructure, tools, ships, trains, cars, bicycles, machines, electrical appliances, furniture, and weapons.

Iron is always the main element in steel, but other elements are used to produce various grades of steel demonstrating altered material, mechanical, and microstructural properties. Stainless steels, for example, typically contain 18% chromium and exhibit improved corrosion and oxidation resistance versus its carbon steel counterpart. Under atmospheric pressures, steels generally take on two crystalline forms: body-centered cubic and face-centered cubic, however depending on the thermal history and alloying, the microstructure may contain the distorted martensite phase or the carbon-rich cementite phase, which are tetragonal and orthorhombic, respectively. In the case of alloyed iron, the strengthening is primarily due to the introduction of carbon in the primarily-iron lattice inhibiting deformation under mechanical stress. Alloying may also induce additional phases that affect the mechanical properties. In most cases, the engineered mechanical properties are at the expense of the ductility and elongation of the pure iron state, which decrease upon the addition of carbon.

Steel was produced in bloomery furnaces for thousands of years, but its large-scale, industrial use began only after more efficient production methods were devised in the 17th century, with the introduction of the blast furnace and production of crucible steel. This was followed by the Bessemer process in England in the mid-19th century, and then by the open-hearth furnace. With the invention of the Bessemer process, a new era of mass-produced steel began. Mild steel replaced wrought iron. The German states were the major steel producers in Europe in the 19th century. American steel production was centred in Pittsburgh; Bethlehem, Pennsylvania; and Cleveland until the late 20th century. Currently, world steel production is centered in China, which produced 54% of the world's steel in 2023.

Further refinements in the process, such as basic oxygen steelmaking (BOS), largely replaced earlier methods by further lowering the cost of production and increasing the quality of the final product. Today more than 1.6 billion tons of steel is produced annually. Modern steel is generally identified by various grades defined by assorted standards organizations. The modern steel industry is one of the largest manufacturing industries in the world, but also one of the most energy and greenhouse gas emission intense industries, contributing 8% of global emissions. However, steel is also very reusable: it is one of the world's most-recycled materials, with a recycling rate of over 60% globally.

Definitions and related materials

The noun ''steel'' originates from the Proto-Germanic adjective or 'made of steel', which is related to or 'standing firm'.

The carbon content of steel is between 0.02% and 2.14% by weight for plain carbon steel (iron-carbon alloys). Alloy steel is steel to which other alloying elements have been intentionally added to modify the characteristics of steel. Common alloying elements include: manganese, nickel, chromium, molybdenum, boron, titanium, vanadium, tungsten, cobalt, and niobium. Additional elements, most frequently considered undesirable, are also important in steel: phosphorus, sulphur, silicon, and traces of oxygen, nitrogen, and copper.

Plain iron-carbon alloys with a higher than 2.1% carbon content are known as cast iron. With modern steelmaking techniques such as powder metal forming, it is possible to make very high-carbon (and other alloy material) steels, but such are not common. Cast iron is not malleable even when hot, but it can be formed by casting as it has a lower melting point than steel and good castability properties. Certain compositions of cast iron, while retaining the economies of melting and casting, can be heat treated after casting to make malleable iron or ductile iron objects. Steel is distinguishable from wrought iron (now largely obsolete), which may contain a small amount of carbon but large amounts of slag.

Material properties

Origins and production

Iron is commonly found in the Earth's crust in the form of an ore, usually an iron oxide, such as magnetite or hematite. Iron is extracted from iron ore by removing the oxygen through its combination with a preferred chemical partner such as carbon which is then lost to the atmosphere as carbon dioxide. This process, known as smelting, was first applied to metals with lower melting points, such as tin, which melts at about , and copper, which melts at about , and the combination, bronze, which has a melting point lower than . In comparison, cast iron melts at about . Small quantities of iron were smelted in ancient times, in the solid-state, by heating the ore in a charcoal fire and then welding the clumps together with a hammer and in the process squeezing out the impurities. With care, the carbon content could be controlled by moving it around in the fire. Unlike copper and tin, liquid or solid iron dissolves carbon quite readily.

All of these temperatures could be reached with ancient methods used since the Bronze Age. Since the oxidation rate of iron increases rapidly beyond , it is important that smelting take place in a low-oxygen environment. Smelting, using carbon to reduce iron oxides, results in an alloy (pig iron) that retains too much carbon to be called steel. The excess carbon and other impurities are removed in a subsequent step.

Other materials are often added to the iron/carbon mixture to produce steel with the desired properties. Nickel and manganese in steel add to its tensile strength and make the austenite form of the iron-carbon solution more stable, chromium increases hardness and melting temperature, and vanadium also increases hardness while making it less prone to metal fatigue.

To inhibit corrosion, at least 11% chromium can be added to steel so that a hard oxide forms on the metal surface; this is known as stainless steel. Tungsten slows the formation of cementite, keeping carbon in the iron matrix and allowing martensite to preferentially form at slower quench rates, resulting in high-speed steel. The addition of lead and sulphur decrease grain size, thereby making the steel easier to turn, but also more brittle and prone to corrosion. Such alloys are nevertheless frequently used for components such as nuts, bolts, and washers in applications where toughness and corrosion resistance are not paramount. For the most part, however, p-block elements such as sulphur, nitrogen, phosphorus, and lead are considered contaminants that make steel more brittle and are therefore removed from steel during the melting processing.

Properties

The density of steel varies based on the alloying constituents but usually ranges between , or .

Even in a narrow range of concentrations of mixtures of carbon and iron that make steel, several different metallurgical structures, with very different properties can form. Understanding such properties is essential to making quality steel. At room temperature, the most stable form of pure iron is the body-centred cubic (BCC) structure called alpha iron or α-iron. It is a fairly soft metal that can dissolve only a small concentration of carbon, no more than 0.005% at and 0.021 wt% at . The inclusion of carbon in alpha iron is called ferrite. At 910 °C, pure iron transforms into a face-centred cubic (FCC) structure, called gamma iron or γ-iron. The inclusion of carbon in gamma iron is called austenite. The more open FCC structure of austenite can dissolve considerably more carbon, as much as 2.1%, (38 times that of ferrite) carbon at , which reflects the upper carbon content of steel, beyond which is cast iron. When carbon moves out of solution with iron, it forms a very hard, but brittle material called cementite (Fe₃C).

When steels with exactly 0.8% carbon (known as a eutectoid steel), are cooled, the austenitic phase (FCC) of the mixture attempts to revert to the ferrite phase (BCC). The carbon no longer fits within the FCC austenite structure, resulting in an excess of carbon. One way for carbon to leave the austenite is for it to precipitate out of solution as cementite, leaving behind a surrounding phase of BCC iron called ferrite with a small percentage of carbon in solution. The two, cementite and ferrite, precipitate simultaneously producing a layered structure called pearlite, named for its resemblance to mother of pearl. In a hypereutectoid composition (greater than 0.8% carbon), the carbon will first precipitate out as large inclusions of cementite at the austenite grain boundaries until the percentage of carbon in the grains has decreased to the eutectoid composition (0.8% carbon), at which point the pearlite structure forms. For steels that have less than 0.8% carbon (hypoeutectoid), ferrite will first form within the grains until the remaining composition rises to 0.8% of carbon, at which point the pearlite structure will form. No large inclusions of cementite will form at the boundaries in hypoeutectoid steel. The above assumes that the cooling process is very slow, allowing enough time for the carbon to migrate.

As the rate of cooling is increased the carbon will have less time to migrate to form carbide at the grain boundaries but will have increasingly large amounts of pearlite of a finer and finer structure within the grains; hence the carbide is more widely dispersed and acts to prevent slip of defects within those grains, resulting in hardening of the steel. At the very high cooling rates produced by quenching, the carbon has no time to migrate but is locked within the face-centred austenite and forms martensite. Martensite is a highly strained and stressed, supersaturated form of carbon and iron and is exceedingly hard but brittle. Depending on the carbon content, the martensitic phase takes different forms. Below 0.2% carbon, it takes on a ferrite BCC crystal form, but at higher carbon content it takes a body-centred tetragonal (BCT) structure. There is no thermal activation energy for the transformation from austenite to martensite. There is no compositional change, so the atoms generally retain their same neighbours..

Martensite has a lower density (it expands during the cooling) than does austenite, so that the transformation between them results in a change of volume. In this case, expansion occurs. Internal stresses from this expansion generally take the form of compression on the crystals of martensite and tension on the remaining ferrite, with a fair amount of shear on both constituents. If quenching is done improperly, the internal stresses can cause a part to shatter as it cools. At the very least, they cause internal work hardening and other microscopic imperfections. It is common for quench cracks to form when steel is water quenched, although they may not always be visible.

Heat treatment

There are many types of heat treating processes available to steel. The most common are annealing, quenching, and tempering.

Annealing is the process of heating the steel to a sufficiently high temperature to relieve local internal stresses. It does not create a general softening of the product but only locally relieves strains and stresses locked up within the material. Annealing goes through three phases: recovery, recrystallization, and grain growth. The temperature required to anneal a particular steel depends on the type of annealing to be achieved and the alloying constituents.

Quenching involves heating the steel to create the austenite phase then quenching it in water or oil. This rapid cooling results in a hard but brittle martensitic structure. The steel is then tempered, which is just a specialized type of annealing, to reduce brittleness. In this application the annealing (tempering) process transforms some of the martensite into cementite, or spheroidite and hence it reduces the internal stresses and defects. The result is a more ductile and fracture-resistant steel.

Production

When iron is smelted from its ore, it contains more carbon than is desirable. To become steel, it must be reprocessed to reduce the carbon to the correct amount, at which point other elements can be added. In the past, steel facilities would cast the raw steel product into ingots which would be stored until use in further refinement processes that resulted in the finished product. In modern facilities, the initial product is close to the final composition and is continuous casting, continuously cast into long slabs, cut and shaped into bars and extrusions and heat treated to produce a final product. Today, approximately 96% of steel is continuously cast, while only 4% is produced as ingots.

The ingots are then heated in a soaking pit and hot rolling, hot rolled into slabs, Billet (semi-finished product)#Billet, billets, or Billet (semi-finished product)#Bloom, blooms. Slabs are hot or cold rolling, cold rolled into sheet metal or plates. Billets are hot or cold rolled into bars, rods, and wire. Blooms are hot or cold rolled into structural steel, such as I-beams and rail tracks, rails. In modern steel mills these processes often occur in one assembly line, with ore coming in and finished steel products coming out. Sometimes after a steel's final rolling, it is heat treated for strength; however, this is relatively rare.

History

Ancient

Steel was known in antiquity and was produced in Bloomery, bloomeries and crucibles.

The earliest known production of steel is seen in pieces of Iron ware, ironware excavated from an archaeological site in Anatolia (Kaman-Kalehöyük) which are nearly 4,000 years old, dating from 1800 BC.

Wootz steel was developed in Southern India and Sri Lanka in the 1st millennium BCE. Metal production sites in Sri Lanka employed wind furnaces driven by the monsoon winds, capable of producing high-carbon steel. Large-scale wootz steel production in Ancient India, India using crucibles occurred by the sixth century BC, the pioneering precursor to modern steel production and metallurgy.

High-carbon steel was produced in British Iron Age, Britain at Broxmouth, Broxmouth Hillfort from 490–375 BC, and ultrahigh-carbon steel was produced in the Netherlands from the 2nd-4th centuries AD. The Roman author Horace identifies steel weapons such as the ''falcata'' in the Iberian Peninsula, while Noric steel was used by the Military of ancient Rome, Roman military.

The History of China#Ancient China, Chinese of the Warring States period (403–221 BC) had quench, quench-hardened steel, while Chinese of the Han dynasty (202 BC—AD 220) created steel by melting together wrought iron with cast iron, thus producing a carbon-intermediate steel by the 1st century AD.Gernet, Jacques (1982). ''A History of Chinese Civilization''. Cambridge: Cambridge University Press. p. 69. .

There is evidence that carbon steel was made in Western Tanzania by the ancestors of the Haya people as early as 2,000 years ago by a complex process of "pre-heating" allowing temperatures inside a furnace to reach 1300 to 1400 °C.

Wootz and Damascus

Evidence of the earliest production of high carbon steel in South Asia is found in Kodumanal in Tamil Nadu, the Golconda area in Telangana and Karnataka, regions of India, as well as in Samanalawewa and Dehigaha Alakanda, regions of Sri Lanka. This came to be known as wootz steel, produced in South India by about the sixth century BC and exported globally. The steel technology existed prior to 326 BC in the region as they are mentioned in literature of Sangam literature, Sangam Tamil, Arabic, and Latin as the finest steel in the world exported to the Roman, Egyptian, Chinese and Arab worlds at that time – what they called ''Seric Iron''. A Tissamaharama Tamil Brahmi inscription, 200 BC Tamil trade guild in Tissamaharama, in the South East of Sri Lanka, brought with them some of the oldest iron and steel artifacts and production processes to the island from the classical antiquity, classical period. The Chinese and locals in Anuradhapura, Sri Lanka had also adopted the production methods of creating wootz steel from the Chera Dynasty Tamils of South India by the 5th century AD. In Sri Lanka, this early steel-making method employed a unique wind furnace, driven by the monsoon winds, capable of producing high-carbon steel.Coghlan, Herbert Henery. (1977). ''Notes on prehistoric and early iron in the Old World''. Oxprint. pp. 99–100 Since the technology was acquired from the Tamilians from South India, the origin of steel technology in India can be conservatively estimated at 400–500 BC.

The manufacture of wootz steel and Damascus steel, famous for its durability and ability to hold an edge, may have been taken by the Arabs from Persia, who took it from India. In 327 BC, Alexander the Great was rewarded by the defeated King Porus the Elder, Porus, not with gold or silver but with 30 pounds of steel. A recent study has speculated that carbon nanotubes were included in its structure, which might explain some of its legendary qualities, though, given the technology of that time, such qualities were produced by chance rather than by design. Natural wind was used where the soil containing iron was heated by the use of wood. The ancient Sinhalese managed to extract a ton of steel for every 2 tons of soil, a remarkable feat at the time. One such furnace was found in Samanalawewa and archaeologists were able to produce steel as the ancients did.

Crucible steel, formed by slowly heating and cooling pure iron and carbon (typically in the form of charcoal) in a crucible, was produced in Merv by the 9th to 10th century AD. In the 11th century, there is evidence of the production of steel in Song dynasty, Song China using two techniques: a "berganesque" method that produced inferior, inhomogeneous steel, and a precursor to the modern Bessemer process that used partial decarburization via repeated forging under a cold blast.

Modern

Since the 17th century, the first step in European steel production has been the smelting of iron ore into pig iron in a blast furnace. Originally employing charcoal, modern methods use coke (fuel), coke, which has proven more economical.

Processes starting from bar iron

In these processes, pig iron made from raw iron ore was refined (fined) in a finery forge to produce bar iron, which was then used in steel-making.

The production of steel by the cementation process was described in a treatise published in Prague in 1574 and was in use in Nuremberg from 1601. A similar process for case hardening armour and files was described in a book published in Naples in 1589. The process was introduced to England in about 1614 and used to produce such steel by Sir Basil Brooke (metallurgist), Basil Brooke at Coalbrookdale during the 1610s.

The raw material for this process were bars of iron. During the 17th century, it was realized that the best steel came from oregrounds iron of a region north of Stockholm, Sweden. This was still the usual raw material source in the 19th century, almost as long as the process was used.

Crucible steel is steel that has been melted in a crucible rather than having been forging, forged, with the result that it is more homogeneous. Most previous furnaces could not reach high enough temperatures to melt the steel. The early modern crucible steel industry resulted from the invention of Benjamin Huntsman in the 1740s. Blister steel (made as above) was melted in a crucible or in a furnace, and cast (usually) into ingots.

Processes starting from pig iron

The modern era in steelmaking began with the introduction of Henry Bessemer's Bessemer process, process in 1855, the raw material for which was pig iron. His method let him produce steel in large quantities cheaply, thus mild steel came to be used for most purposes for which wrought iron was formerly used. The Gilchrist-Thomas process (or ''basic Bessemer process'') was an improvement to the Bessemer process, made by lining the converter with a basic (chemistry), basic material to remove phosphorus.

Another 19th-century steelmaking process was the Siemens-Martin process, which complemented the Bessemer process. It consisted of co-melting bar iron (or steel scrap) with pig iron.

These methods of steel production were rendered obsolete by the Linz-Donawitz process of basic oxygen steelmaking (BOS), developed in 1952, and other oxygen steel making methods. Basic oxygen steelmaking is superior to previous steelmaking methods because the oxygen pumped into the furnace limited impurities, primarily nitrogen, that previously had entered from the air used, and because, with respect to the open hearth process, the same quantity of steel from a BOS process is manufactured in one-twelfth the time. Today, electric arc furnaces (EAF) are a common method of reprocessing scrap, scrap metal to create new steel. They can also be used for converting pig iron to steel, but they use a lot of electrical energy (about 440 kWh per metric ton), and are thus generally only economical when there is a plentiful supply of cheap electricity.

Industry

The steel industry is often considered an indicator of economic progress, because of the critical role played by steel in infrastructural and overall economic development. In 1980, there were more than 500,000 U.S. steelworkers. By 2000, the number of steelworkers had fallen to 224,000.

The boom and bust, economic boom in China and India caused a massive increase in the demand for steel. Between 2000 and 2005, world steel demand increased by 6%. Since 2000, several Indian and Chinese steel firms have expanded to meet demand, such as Tata Steel (which bought Corus Group in 2007), Baosteel Group and Shagang Group. , though, ArcelorMittal is the world's List of steel producers, largest steel producer.

In 2005, the British Geological Survey stated China was the top steel producer with about one-third of the world share; Japan, Russia, and the United States were second, third, and fourth, respectively, according to the survey. The large production capacity of steel results also in a significant amount of carbon dioxide emissions inherent related to the main production route.

At the end of 2008, the steel industry faced a sharp downturn that led to many cut-backs.

In 2021, it was estimated that around 7% of the global greenhouse gas emissions resulted from the steel industry. Reduction of these emissions are expected to come from a shift in the main production route using cokes, more recycling of steel and the application of carbon capture and storage technology.

Recycling

Steel is one of the world's most-recycled materials, with a Ferrous metal recycling, recycling rate of over 60% globally; in the United States alone, over were recycled in the year 2008, for an overall recycling rate of 83%.

As more steel is produced than is scrapped, the amount of recycled raw materials is about 40% of the total of steel produced – in 2016, of crude steel was produced globally, with recycled.

Contemporary

Carbon

Modern steels are made with varying combinations of alloy metals to fulfil many purposes. Carbon steel, composed simply of iron and carbon, accounts for 90% of steel production. Low alloy steel is alloyed with other elements, usually molybdenum, manganese, chromium, or nickel, in amounts of up to 10% by weight to improve the hardenability of thick sections. HSLA steel, High strength low alloy steel has small additions (usually < 2% by weight) of other elements, typically 1.5% manganese, to provide additional strength for a modest price increase.

Recent corporate average fuel economy (CAFE) regulations have given rise to a new variety of steel known as Advanced High Strength Steel (AHSS). This material is both strong and ductile so that vehicle structures can maintain their current safety levels while using less material. There are several commercially available grades of AHSS, such as dual-phase steel, which is heat treated to contain both a ferritic and martensitic microstructure to produce a formable, high strength steel. Transformation Induced Plasticity (TRIP) steel involves special alloying and heat treatments to stabilize amounts of austenite at room temperature in normally austenite-free low-alloy ferritic steels. By applying strain, the austenite undergoes a phase transition to martensite without the addition of heat. Twinning Induced Plasticity (TWIP) steel uses a specific type of strain to increase the effectiveness of work hardening on the alloy.

Carbon Steels are often hot-dip galvanizing, galvanized, through Hot-dip galvanization, hot-dip or electroplating in zinc for protection against rust.

Alloy

Stainless steel contains a minimum of 11% chromium, often combined with nickel, to resist corrosion. Some stainless steels, such as the Allotropes of iron, ferritic stainless steels are magnetic, while others, such as the austenite, austenitic, are nonmagnetic. Corrosion-resistant steels are abbreviated as CRES.

Alloy steels are plain-carbon steels in which small amounts of alloying elements like chromium and vanadium have been added. Some more modern steels include tool steels, which are alloyed with large amounts of tungsten and cobalt or other elements to maximize solution hardening. This also allows the use of precipitation hardening and improves the alloy's temperature resistance. Tool steel is generally used in axes, drills, and other devices that need a sharp, long-lasting cutting edge. Other special-purpose alloys include weathering steels such as Cor-ten, which weather by acquiring a stable, rusted surface, and so can be used un-painted. Maraging steel is alloyed with nickel and other elements, but unlike most steel contains little carbon (0.01%). This creates a very strong but still malleability, malleable steel.

Eglin steel uses a combination of over a dozen different elements in varying amounts to create a relatively low-cost steel for use in bunker buster weapons. Mangalloy, Hadfield steel, named after Robert Hadfield, or manganese steel, contains 12–14% manganese which, when abraded, strain-hardens to form a very hard skin which resists wearing. Uses of this particular alloy include Continuous track, tank tracks, bulldozer#Blade, bulldozer blade edges, and cutting blades on the jaws of life.

Standards

Most of the more commonly used steel alloys are categorized into various grades by standards organizations. For example, the Society of Automotive Engineers has a series of SAE steel grades, grades defining many types of steel. The ASTM International, American Society for Testing and Materials has a separate set of standards, which define alloys such as A36 steel, the most commonly used structural steel in the United States. The Japanese Industrial Standards, JIS also defines a series of steel grades that are being used extensively in Japan as well as in developing countries.

Uses

Iron and steel are used widely in the construction of roads, railways, other infrastructure, appliances, and buildings. Most large modern structures, such as stadium#The modern stadium, stadiums and skyscrapers, Steel bridge, bridges, and airports, are supported by a steel skeleton. Even those with a concrete structure employ steel for reinforcing. It sees widespread use in major appliances and automobile, cars. Despite the growth in usage of aluminium, steel is still the main material for car bodies. Steel is used in a variety of other construction materials, such as bolts, nail (engineering), nails and screws, and other household products and cooking utensils.

Other common applications include shipbuilding, pipeline transport, pipelines, mining, offshore construction, aerospace, white goods (e.g. washing machines), heavy equipment such as bulldozers, office furniture, steel wool, tool, and armour in the form of personal vests or vehicle armour (better known as rolled homogeneous armour in this role).

Historical

Before the introduction of the Bessemer process and other modern production techniques, steel was expensive and was only used where no cheaper alternative existed, particularly for the cutting edge of knives, razors, swords, and other items where a hard, sharp edge was needed. It was also used for spring (device), springs, including those used in clock, clocks and watches.

With the advent of faster and cheaper production methods, steel has become easier to obtain and much cheaper. It has replaced wrought iron for a multitude of purposes. However, the availability of plastics in the latter part of the 20th century allowed these materials to replace steel in some applications due to their lower fabrication cost and weight. Carbon-fiber reinforced polymer, Carbon fibre is replacing steel in some cost-insensitive applications such as sports equipment and high-end automobiles.

Long

* As reinforcing bars and mesh in reinforced concrete
* Railroad tracks
* Structural steel in modern buildings and bridges
* Wires
* Input to reforging applications

Flat carbon

* Major appliances
* Magnetic cores
* The inside and outside body of automobiles, trains, and ships.

Weathering (COR-TEN)

* Intermodal containers
* Outdoor sculptures
* Architecture
* Highliner train cars

Stainless

* Cutlery
* Rulers
* Surgical instruments
* Watches
* Guns
* passenger car (rail), Rail passenger vehicles
* Tablet computer, Tablets
* Waste container, Trash Cans
* Body piercing jewellery
* Inexpensive Ring (jewellery), rings
* Components of spacecraft and space stations

Low-background

Steel manufactured after World War II is radioactive contamination, contaminated with radionuclides, because steel production uses air, and the atmosphere is contaminated with radioactive dust produced by nuclear weapons testing. Low-background steel, steel manufactured prior to 1945, is used for certain radiation-sensitive applications such as Geiger counters and radiation shielding.

See also

* Bulat steel
* Direct reduction
* Carbon steel
* Damascus steel
* Galvanizing
* History of the steel industry (1970–present)
* Iron in folklore
* List of blade materials
* Machinability
* Noric steel
* Pelletizing
* Rolling (metalworking), Rolling
* Rolling mill
* Rust Belt
* Second Industrial Revolution
* Silicon steel
* Steel abrasive
* Steel mill
* Tamahagane, used in Japanese swords
* Tinning, Tinplate
* Toledo steel
* Wootz steel

References

Bibliography

*
*
*
*
*
*
*
*

Further reading

*
*
*
*
*
*
*
*
*

External links

Official website
of the World Steel Association (WorldSteel.org)
*
SteelUniversity.org
– online steel education resources, an initiative of World Steel Association

MATDAT Database of Properties of Unalloyed, Low-Alloy and High-Alloy Steels
– obtained from published results of materials testing

{{Authority control

Steel,
2nd-millennium BC introductions
Building materials
Roofing materials