The Sabre 38 is an American

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by Roger Hewson and the Sabre Design Team as a racer-

cruiser A cruiser is a type of warship. Modern cruisers are generally the largest ships in a fleet after aircraft carriers and amphibious assault ships, and can usually perform several operational roles from search-and-destroy to ocean escort to sea ...

and first built in 1981.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 316-317. Houghton Mifflin Company, 1994.

Production

The design was built by Sabre Yachts in the

United States The United States of America (USA), also known as the United States (U.S.) or America, is a country primarily located in North America. It is a federal republic of 50 U.S. state, states and a federal capital district, Washington, D.C. The 48 ...

, but it is now out of production. A total of 100 of the original design were completed between 1981 and 1987, while 114 of the Mark II version were built from 1988 to 1995.

Design

The Sabre 38 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...

, built predominantly of

fiberglass Fiberglass (American English) or fibreglass (English in the Commonwealth of Nations, Commonwealth English) is a common type of fibre-reinforced plastic, fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened i ...

, with wood trim. It has a

masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, a ...

rig, a

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a

reverse transom In some boats and ships, a transom is the aft transverse surface of the hull that forms the stern of a vessel. Historically, they are a development from the canoe stern (or "double-ender") wherein which both bow and stern are pointed. Transom ...

and a

skeg A skeg (or skegg or skag) is a sternward extension of the keel of boats and ships which have a rudder mounted on the centre line. The term also applies to the lowest point on an outboard motor or the outdrive of an inboard/outboard."A small fin f ...

-mounted

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...

controlled by a

wheel A wheel is a rotating component (typically circular in shape) that is intended to turn on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machin ...

. The boat is fitted with a Westerbeke

diesel engine The diesel engine, named after the German engineer Rudolf Diesel, is an internal combustion engine in which Combustion, ignition of diesel fuel is caused by the elevated temperature of the air in the cylinder due to Mechanics, mechanical Compr ...

of for docking and maneuvering. The fuel tank holds and the fresh water tank has a capacity of . The Mark I has sleeping accommodation for six people, with a forward "V"-berth in the bow cabin, a double port side settee berth in the main cabin, along with a single settee berth on the starboard side and double and single aft quarter berths. There is a provided navigation station on the starboard side. The

galley A galley is a type of ship optimised for propulsion by oars. Galleys were historically used for naval warfare, warfare, Maritime transport, trade, and piracy mostly in the seas surrounding Europe. It developed in the Mediterranean world during ...

is at the foot of the

companionway In the architecture of a ship, a companion or companionway is a raised and windowed hatchway in the ship's deck, with a ladder leading below and the hooded entrance-hatch to the main cabins. A companionway may be secured by doors or, commonly i ...

steps on the port side and includes a three-burner alcohol-fired stove and oven, an

ice box An icebox (also called a cold closet) is a compact non-mechanical refrigerator which was a common early-twentieth-century kitchen appliance before the development of safely powered refrigeration devices. Before the development of electric refrig ...

or refrigerator under the cockpit and a pressurized water supply. The

head A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple ani ...

is located just aft of the bow cabin, on the port side and includes a shower. Ventilation is provided by hatches over the main cabin and the bow cabin, plus eight opening ports. The cockpit is T-shaped and has self-tailing winches for the

genoa Genoa ( ; ; ) is a city in and the capital of the Italian region of Liguria, and the sixth-largest city in Italy. As of 2025, 563,947 people live within the city's administrative limits. While its metropolitan city has 818,651 inhabitan ...

. There are winches for the

halyard In sailing, a halyard or halliard is a line (rope) that is used to hoist a ladder, sail, flag or yard. The term "halyard" derives from the Middle English ''halier'' ("rope to haul with"), with the last syllable altered by association with the E ...

s and for

reefing Reefing reduces the area of a sail, usually by folding or rolling one edge of the canvas in on itself and attaching the unused portion to a Spar (sailing), spar or a , as the primary measure to preserve a sailing vessel's stability in strong wi ...

. The

mainsail A mainsail is a sail rigged on the main mast (sailing), mast of a sailing vessel. * On a square rigged vessel, it is the lowest and largest sail on the main mast. * On a fore-and-aft rigged vessel, it is the sail rigged aft of the main mast. T ...

has a

mainsheet traveler A traveller is a part of the rigging of a boat or ship that provides a moving attachment point for a rope, sail or yard to a fixed part of the vessel. It may take the form of anything from a simple ring on a metal bar or a spar to, especially in a ...

on the cabin top. The boat may be optionally equipped with a

boom vang A boom vang (US) or kicking strap (UK) (often shortened to "vang" or "kicker") is a line or piston system on a sailboat used to exert downward force on the boom and thus control the shape of the sail. The Collins English Dictionary defines it a ...

and a

spinnaker A spinnaker is a sail designed specifically for sailing off the wind on courses between a Point of sail#Reaching, reach (wind at 90° to the course) to Point of sail#Running downwind, downwind (course in the same direction as the wind). Spinna ...

, including associated hardware and winches.

Variants

;Sabre 38 :This model was designed by Roger Hewson and the Sabre Design Team and introduced in 1981, with 100 built before production ended in 1987. It has a length overall of and a waterline length of . The fin keel version displaces , carries of ballast and has a draft of . The centerboard-equipped version displaces , carries of ballast. It has a draft of with the centreboard extended and with it retracted. The boat has a manufacturer-determined

PHRF Performance Handicap Racing Fleet (PHRF) is a handicapping system used for yacht racing in North America. It allows dissimilar classes of sailboats to be raced against each other. The aim is to cancel out the inherent advantages and disadvantages ...

racing average handicap of 111. ;Sabre 38 Mark II :This model was designed by Roger Hewson and introduced in 1988, with 114 completed before production ended in 1995. It has a length overall of , a waterline length of , displaces and carries of ballast. The boat has a draft of with the standard keel fitted. A shoal draft

wing keel The winged keel is a sailboat keel layout first fitted on the 12-metre class yacht ''Australia II'', 1983 America's Cup winner. Design This layout was adopted by Ben Lexcen, designer of ''Australia II''. Although Ben Lexcen "had tried the winged ...

and a stub keel with a centerboard were factory options.

Operational history

In a 1994 review Richard Sherwood wrote of the Mark I, "the hull and rig are designed for speed, while the cabin arrangement is comfortable for cruising. Fuel and water are adequate for offshore sailing. The keel model is standard, the keel/centerboard is optional."

References

{{Reflist Keelboats 1980s sailboat type designs Sailing yachts Sailboat type designs by Roger Hewson Sailboat type designs by Sabre Design Team Sailboat types built by Sabre Yachts

Production

Design

Variants

Operational history

See also

References