A physical constant, sometimes fundamental physical constant or universal constant, is a
physical quantity
A physical quantity is a physical property of a material or system that can be quantified by measurement. A physical quantity can be expressed as a ''value'', which is the algebraic multiplication of a ' Numerical value ' and a ' Unit '. For examp ...
that is generally believed to be both universal in nature and have
constant value in time. It is contrasted with a
mathematical constant, which has a fixed numerical value, but does not directly involve any physical measurement.
There are many physical constants in science, some of the most widely recognized being the
speed of light
The speed of light in vacuum, commonly denoted , is a universal physical constant that is important in many areas of physics. The speed of light is exactly equal to ). According to the special theory of relativity, is the upper limit fo ...
in a vacuum ''c'', the
gravitational constant ''G'', the
Planck constant ''h'', the
electric constant ''ε''
0, and the
elementary charge
The elementary charge, usually denoted by is the electric charge carried by a single proton or, equivalently, the magnitude of the negative electric charge carried by a single electron, which has charge −1 . This elementary charge is a funda ...
''e''. Physical constants can take many
dimensional forms: the speed of light signifies a maximum
speed
In everyday use and in kinematics, the speed (commonly referred to as ''v'') of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity ...
for any object and its
dimension
In physics and mathematics, the dimension of a mathematical space (or object) is informally defined as the minimum number of coordinates needed to specify any point within it. Thus, a line has a dimension of one (1D) because only one coor ...
is
length divided by
time
Time is the continued sequence of existence and events that occurs in an apparently irreversible succession from the past, through the present, into the future. It is a component quantity of various measurements used to sequence events, t ...
; while the
fine-structure constant ''α'', which characterizes the strength of the
electromagnetic interaction, is
dimensionless.
The term ''fundamental physical constant'' is sometimes used to refer to universal-but-dimensioned physical constants such as those mentioned above. Increasingly, however, physicists only use ''fundamental physical constant'' for
dimensionless physical constants, such as the fine-structure constant ''α''.
Physical constant, as discussed here, should not be confused with other quantities called "constants", which are assumed to be constant in a given context without being fundamental, such as the "
time constant" characteristic of a given system, or
material constants (e.g.,
Madelung constant,
electrical resistivity, and
heat capacity).
Since May 2019, all of the
SI base unit
The SI base units are the standard units of measurement defined by the International System of Units (SI) for the seven base quantities of what is now known as the International System of Quantities: they are notably a basic set from which all ...
s have been defined in terms of physical constants. As a result, five constants:
the speed of light in vacuum, ''c''; the
Planck constant, ''h''; the
elementary charge
The elementary charge, usually denoted by is the electric charge carried by a single proton or, equivalently, the magnitude of the negative electric charge carried by a single electron, which has charge −1 . This elementary charge is a funda ...
, ''e''; the
Avogadro constant, ''N''
A; and the
Boltzmann constant, ''k''
B, have known exact numerical values when expressed in SI units. The first three of these constants are fundamental constants, whereas ''N''
A and ''k''
B are of a technical nature only: they do not describe any property of the universe, but instead only give a proportionality factor for defining the units used with large numbers of atomic-scale entities.
Choice of units
Whereas the
physical quantity
A physical quantity is a physical property of a material or system that can be quantified by measurement. A physical quantity can be expressed as a ''value'', which is the algebraic multiplication of a ' Numerical value ' and a ' Unit '. For examp ...
indicated by a physical constant does not depend on the unit system used to express the quantity, the numerical values of dimensional physical constants do depend on choice of unit system.
The term "physical constant" refers to the physical quantity, and not to the numerical value within any given system of units. For example, the
speed of light
The speed of light in vacuum, commonly denoted , is a universal physical constant that is important in many areas of physics. The speed of light is exactly equal to ). According to the special theory of relativity, is the upper limit fo ...
is defined as having the numerical value of when expressed in the
SI unit
The International System of Units, known by the international abbreviation SI in all languages and sometimes Pleonasm#Acronyms and initialisms, pleonastically as the SI system, is the modern form of the metric system and the world's most wid ...
metres per second, and as having the numerical value of 1 when expressed in the
natural units Planck length per Planck time. While its numerical value can be defined at will by the choice of units, the speed of light itself is a single physical constant.
Any
ratio between physical constants of the same dimensions results in a
dimensionless physical constant, for example, the
proton-to-electron mass ratio. Any relation between physical quantities can be expressed as a relation between dimensionless ratios via a process known as
nondimensionalisation.
The term of "fundamental physical constant" is reserved for physical quantities which, according to the current state of knowledge, are regarded as immutable and as non-derivable from more fundamental principles. Notable examples are the speed of light ''c'', and the
gravitational constant ''G''.
The
fine-structure constant ''α'' is the best known dimensionless fundamental physical constant. It is the value of the
elementary charge
The elementary charge, usually denoted by is the electric charge carried by a single proton or, equivalently, the magnitude of the negative electric charge carried by a single electron, which has charge −1 . This elementary charge is a funda ...
squared expressed in
Planck units. This value has become a standard example when discussing the derivability or non-derivability of physical constants. Introduced by
Arnold Sommerfeld, its value as determined at the time was consistent with 1/137. This motivated
Arthur Eddington (1929) to construct an argument why its value might be 1/137 precisely, which related to the
Eddington number, his estimate of the number of protons in the Universe. By the 1940s, it became clear that the value of the fine-structure constant deviates significantly from the precise value of 1/137, refuting Eddington's argument.
With the development of
quantum chemistry
Quantum chemistry, also called molecular quantum mechanics, is a branch of physical chemistry focused on the application of quantum mechanics to chemical systems, particularly towards the quantum-mechanical calculation of electronic contribution ...
in the 20th century, however, a vast number of previously inexplicable dimensionless physical constants ''were'' successfully computed from theory. In light of that, some theoretical physicists still hope for continued progress in explaining the values of other dimensionless physical constants.
It is known that
the Universe would be very different if these constants took values significantly different from those we observe. For example, a few percent change in the value of the fine structure constant would be enough to eliminate stars like our Sun. This has prompted attempts at
anthropic explanations of the values of some of the dimensionless fundamental physical constants.
Natural units
It is possible to combine dimensional universal physical constants to define fixed quantities of any desired dimension, and this property has been used to construct various systems of natural units of measurement. Depending on the choice and arrangement of constants used, the resulting natural units may be convenient to an area of study. For example,
Planck units, constructed from
''c'',
''G'',
''ħ'', and
''k''B give conveniently sized measurement units for use in studies of
quantum gravity, and
Hartree atomic units, constructed from
''ħ'',
''m''e,
''e'' and
4''πε''0 give convenient units in
atomic physics. The choice of constants used leads to widely varying quantities.
Number of fundamental constants
The number of fundamental physical constants depends on the
physical theory accepted as "fundamental".
Currently, this is the theory of
general relativity
General relativity, also known as the general theory of relativity and Einstein's theory of gravity, is the geometric theory of gravitation published by Albert Einstein in 1915 and is the current description of gravitation in modern physics. ...
for gravitation and the
Standard Model
The Standard Model of particle physics is the theory describing three of the four known fundamental forces ( electromagnetic, weak and strong interactions - excluding gravity) in the universe and classifying all known elementary particles. I ...
for electromagnetic, weak and strong nuclear interactions and the matter fields.
Between them, these theories account for a total of 19 independent fundamental constants.
There is, however, no single "correct" way of enumerating them, as it is a matter of arbitrary choice which quantities are considered "fundamental" and which as "derived". Uzan (2011) lists 22 "unknown constants" in the fundamental theories, which give rise to 19 "unknown dimensionless parameters", as follows:
*the
gravitational constant ''G'',
*the
speed of light
The speed of light in vacuum, commonly denoted , is a universal physical constant that is important in many areas of physics. The speed of light is exactly equal to ). According to the special theory of relativity, is the upper limit fo ...
''c'',
*the
Planck constant ''h'',
*the 9
Yukawa couplings
In particle physics, Yukawa's interaction or Yukawa coupling, named after Hideki Yukawa, is an interaction between particles according to the Yukawa potential. Specifically, it is a scalar field (or pseudoscalar field) and a Dirac field of the ...
for the quarks and leptons (equivalent to specifying the
rest mass of these
elementary particles
In particle physics, an elementary particle or fundamental particle is a subatomic particle that is not composed of other particles. Particles currently thought to be elementary include electrons, the fundamental fermions (quarks, leptons, an ...
),
*2 parameters of the
Higgs field potential,
*4 parameters for the
quark mixing matrix,
*3 coupling constants for the
gauge groups
SU(3) × SU(2) × U(1) (or equivalently, two coupling constants and the
Weinberg angle),
*a phase for the
QCD vacuum.
The number of 19 independent fundamental physical constants is subject to change under possible
extensions of the Standard Model, notably by the introduction of
neutrino mass
A neutrino ( ; denoted by the Greek letter ) is a fermion (an elementary particle with spin of ) that interacts only via the weak interaction and gravity. The neutrino is so named because it is electrically neutral and because its rest mass is ...
(equivalent to seven additional constants, i.e. 3 Yukawa couplings and 4
lepton mixing parameters).
The discovery of variability in any of these constants would be equivalent to the discovery of "
new physics".
The question as to which constants are "fundamental" is neither straightforward nor meaningless, but a question of interpretation of the physical theory regarded as fundamental; as pointed out by , not all physical constants are of the same importance, with some having a deeper role than others.
proposed a classification schemes of three types of constants:
*A: physical properties of particular objects
*B: characteristic of a class of physical phenomena
*C: universal constants
The same physical constant may move from one category to another as the understanding of its role deepens; this has notably happened to the
speed of light
The speed of light in vacuum, commonly denoted , is a universal physical constant that is important in many areas of physics. The speed of light is exactly equal to ). According to the special theory of relativity, is the upper limit fo ...
, which was a class A constant (characteristic of
light
Light or visible light is electromagnetic radiation that can be perceived by the human eye. Visible light is usually defined as having wavelengths in the range of 400–700 nanometres (nm), corresponding to frequencies of 750–420 te ...
) when it was first measured, but became a class B constant (characteristic of
electromagnetic phenomena) with the development of
classical electromagnetism, and finally a class C constant with the discovery of
special relativity
In physics, the special theory of relativity, or special relativity for short, is a scientific theory regarding the relationship between space and time. In Albert Einstein's original treatment, the theory is based on two postulates:
# The law ...
.
Tests on time-independence
By definition, fundamental physical constants are subject to
measurement, so that their being constant (independent on both the time and position of the performance of the measurement) is necessarily an experimental result and subject to verification.
Paul Dirac in 1937 speculated that physical constants such as the
gravitational constant or the
fine-structure constant might be subject to change over time in proportion of the
age of the universe. Experiments can in principle only put an upper bound on the relative change per year. For the fine-structure constant, this upper bound is comparatively low, at
roughly 10
−17 per year (as of 2008).
The gravitational constant is much more difficult to measure with precision, and conflicting measurements in the 2000s have inspired the controversial suggestions of a periodic variation of its value in a 2015 paper.
However, while its value is not known to great precision, the possibility of observing
type Ia supernovae which happened in the universe's remote past, paired with the assumption that the physics involved in these events is universal, allows for an upper bound of less than 10
−10 per year for the gravitational constant over the last nine billion years.
Similarly, an upper bound of the change in the
proton-to-electron mass ratio has been placed at 10
−7 over a period of 7 billion years (or 10
−16 per year) in a 2012 study based on the observation of
methanol in a distant galaxy.
It is problematic to discuss the proposed rate of change (or lack thereof) of a single ''dimensional'' physical constant in isolation. The reason for this is that the choice of units is arbitrary, making the question of whether a constant is undergoing change an artefact of the choice (and definition) of the units.
For example, in
SI units, the speed of light was given a defined value in 1983. Thus, it was meaningful to experimentally measure the speed of light in SI units prior to 1983, but it is not so now. Similarly, with effect from May 2019, the Planck constant has a defined value, such that all
SI base units are now defined in terms of fundamental physical constants. With this change, the
international prototype of the kilogram is being retired as the last physical object used in the definition of any SI unit.
Tests on the immutability of physical constants look at ''dimensionless'' quantities, i.e. ratios between quantities of like dimensions, in order to escape this problem. Changes in physical constants are not meaningful if they result in an ''observationally indistinguishable'' universe. For example, a
"change" in the speed of light ''c'' would be meaningless if accompanied by a corresponding change in the elementary charge ''e'' so that the ratio (the fine-structure constant) remained unchanged.
Fine-tuned universe
Some physicists have explored the notion that if the
dimensionless physical constants had sufficiently different values, our Universe would be so radically different that intelligent life would probably not have emerged, and that our Universe therefore seems to be
fine-tuned for intelligent life. However, the phase space of the possible constants and their values is unknowable, so any conclusions drawn from such arguments are unsupported. The anthropic principle states a logical
truism: the fact of our existence as intelligent beings who can measure physical constants requires those constants to be such that beings like us can exist. There are a variety of interpretations of the constants' values, including that of a
divine creator (the apparent fine-tuning is actual and intentional), or that ours is one universe of many in a
multiverse (e.g. the
many-worlds interpretation of
quantum mechanics
Quantum mechanics is a fundamental theory in physics that provides a description of the physical properties of nature at the scale of atoms and subatomic particles. It is the foundation of all quantum physics including quantum chemistry, q ...
), or even that,
if information is an innate property of the universe and logically inseparable from consciousness, a universe without the capacity for conscious beings cannot exist.
The fundamental constants and quantities of nature have been discovered to be
fine-tuned to such an extraordinarily narrow range that if it were not, the origin and evolution of conscious life in the universe would not be permitted.
Table of physical constants
The table below lists some frequently used constants and their CODATA recommended values. For a more extended list, refer to ''
List of physical constants''.
See also
*
List of common physics notations
References
*
* .
External links
Sixty Symbols University of Nottingham
{{Authority control
Measurement
Empirical laws
Constant
Scientific laws