A nose cone is the

conical In geometry, a cone is a three-dimensional figure that tapers smoothly from a flat base (typically a circle) to a point not contained in the base, called the ''apex'' or '' vertex''. A cone is formed by a set of line segments, half-lines, ...

ly shaped forwardmost section of a

rocket A rocket (from , and so named for its shape) is a vehicle that uses jet propulsion to accelerate without using any surrounding air. A rocket engine produces thrust by reaction to exhaust expelled at high speed. Rocket engines work entirely ...

guided missile A missile is an airborne ranged weapon capable of Propulsion, self-propelled flight aided usually by a propellant, jet engine or rocket motor. Historically, 'missile' referred to any projectile that is thrown, shot or propelled towards a targ ...

aircraft An aircraft ( aircraft) is a vehicle that is able to flight, fly by gaining support from the Atmosphere of Earth, air. It counters the force of gravity by using either Buoyancy, static lift or the Lift (force), dynamic lift of an airfoil, or, i ...

, designed to modulate oncoming airflow behaviors and minimize

aerodynamic drag In fluid dynamics, drag, sometimes referred to as fluid resistance, is a force acting opposite to the direction of motion of any object moving with respect to a surrounding fluid. This can exist between two fluid layers, two solid surfaces, or b ...

. Nose cones are also designed for submerged

watercraft A watercraft or waterborne vessel is any vehicle designed for travel across or through water bodies, such as a boat, ship, hovercraft, submersible or submarine. Types Historically, watercraft have been divided into two main categories. *Raf ...

such as

submarine A submarine (often shortened to sub) is a watercraft capable of independent operation underwater. (It differs from a submersible, which has more limited underwater capability.) The term "submarine" is also sometimes used historically or infor ...

submersible A submersible is an underwater vehicle which needs to be transported and supported by a larger ship, watercraft or dock, platform. This distinguishes submersibles from submarines, which are self-supporting and capable of prolonged independent ope ...

s and

torpedo A modern torpedo is an underwater ranged weapon launched above or below the water surface, self-propelled towards a target, with an explosive warhead designed to detonate either on contact with or in proximity to the target. Historically, such ...

es, and in high-speed

land vehicle A vehicle () is a machine designed for self-propulsion, usually to transport people, cargo, or both. The term "vehicle" typically refers to land vehicles such as human-powered vehicles (e.g. bicycles, tricycles, velomobiles), animal-powered tr ...

s such as rocket cars and

velomobile A velomobile (); velomobiel, velo, or bicycle car is a human-powered vehicle (HPV) enclosed for Aerodynamics, aerodynamic advantage and/or protection from weather and collisions. Velomobiles are similar to recumbent bicycles, pedal go-karts and ...

Rockets

On a suborbital rocket vehicle it consists of a chamber or chambers in which instruments, animals, plants, or auxiliary equipment may be carried, and an outer surface built to withstand high temperatures generated by

aerodynamic heating Aerodynamic heating is the heating of a solid body produced by its high-speed passage through air. In science and engineering, an understanding of aerodynamic heating is necessary for predicting the behaviour of meteoroids which enter the Earth's ...

. Much of the fundamental research related to

hypersonic In aerodynamics, a hypersonic speed is one that exceeds five times the speed of sound, often stated as starting at speeds of Mach 5 and above. The precise Mach number at which a craft can be said to be flying at hypersonic speed varies, since i ...

flight was done towards creating viable nose cone designs for the

atmospheric reentry Atmospheric entry (sometimes listed as Vimpact or Ventry) is the movement of an object from outer space into and through the gases of an atmosphere of a planet, dwarf planet, or natural satellite. Atmospheric entry may be ''uncontrolled entry ...

of spacecraft and

ICBM An intercontinental ballistic missile (ICBM) is a ballistic missile with a range (aeronautics), range greater than , primarily designed for nuclear weapons delivery (delivering one or more Thermonuclear weapon, thermonuclear warheads). Conven ...

reentry vehicles. In a

satellite launch vehicle The Satellite Launch Vehicle or SLV was a small-lift launch vehicle project started in the early 1970s by the Indian Space Research Organisation (ISRO) to develop the technology needed to launch satellites. SLV was intended to reach a height of ...

, the nose cone may become the satellite itself after separating from the final

stage Stage, stages, or staging may refer to: Arts and media Acting * Stage (theatre), a space for the performance of theatrical productions * Theatre, a branch of the performing arts, often referred to as "the stage" * ''The Stage'', a weekly Brit ...

of the rocket, or it may be used as a

payload fairing A payload fairing or nose fairing is a nose cone used to protect a launch vehicle, spacecraft payload (air and space craft), payload against the impact of dynamic pressure and aerodynamic heating during launch through an atmosphere. An additiona ...

to shield the satellite until out of the atmosphere, then separating (often in two halves) from the satellite.

Aircraft

On airliners the nose cone is also a

radome A radome (a portmanteau of "radar" and "dome") is a structural, weatherproof enclosure that protects a radar antenna (radio), antenna. The radome is constructed of material transparent to radio waves. Radomes protect the antenna from weathe ...

protecting the

weather radar A weather radar, also called weather surveillance radar (WSR) and Doppler weather radar, is a type of radar used to locate precipitation (meteorology), precipitation, calculate its motion, and estimate its type (rain, snow, hail etc.). Modern w ...

from aerodynamic forces. ILA 2010 - gravitat-OFF - IMG 8975

The shape of the nose cone must be chosen for minimum drag so a

solid of revolution In geometry, a solid of revolution is a Solid geometry, solid figure obtained by rotating a plane figure around some straight line (the ''axis of revolution''), which may not Intersection (geometry), intersect the generatrix (except at its bound ...

is used that gives least resistance to motion. The article on

nose cone design Given the problem of the aerodynamic design of the nose cone section of any vehicle or body meant to travel through a compressible fluid medium (such as a rocket or aircraft, missile, shell or bullet), an important problem is the determination ...

contains possible shapes and formulas.

Supersonic

Due to the extreme temperatures involved, nose cones for high-speed applications (e.g. Supersonic speeds or atmospheric reentry of

orbit In celestial mechanics, an orbit (also known as orbital revolution) is the curved trajectory of an object such as the trajectory of a planet around a star, or of a natural satellite around a planet, or of an artificial satellite around an ...

al vehicles) have to be made of

refractory In materials science, a refractory (or refractory material) is a material that is resistant to decomposition by heat or chemical attack and that retains its strength and rigidity at high temperatures. They are inorganic, non-metallic compound ...

materials.

Pyrolytic carbon Pyrolytic carbon is a material similar to graphite, but with some covalent bonding between its graphene sheets as a result of imperfections in its production. Pyrolytic carbon is man-made and is thought not to be found in nature.Ratner, Buddy D ...

is one choice, reinforced carbon-carbon composite or HRSI ceramics are other popular choices. Another design strategy is using ablative heat shields, which get consumed during operation, disposing of excess heat that way. Materials used for ablative shields include, for example carbon phenolic,

polydimethylsiloxane Polydimethylsiloxane (PDMS), also known as dimethylpolysiloxane or dimethicone, is a silicone polymer with a wide variety of uses, from cosmetics to industrial lubrication and passive daytime radiative cooling. PDMS is particularly known for its ...

composite Composite or compositing may refer to: Materials * Composite material, a material that is made from several different substances ** Metal matrix composite, composed of metal and other parts ** Cermet, a composite of ceramic and metallic material ...

with

silica Silicon dioxide, also known as silica, is an oxide of silicon with the chemical formula , commonly found in nature as quartz. In many parts of the world, silica is the major constituent of sand. Silica is one of the most complex and abundant f ...

filler and

carbon fiber Carbon fiber-reinforced polymers (American English), carbon-fibre-reinforced polymers ( Commonwealth English), carbon-fiber-reinforced plastics, carbon-fiber reinforced-thermoplastic (CFRP, CRP, CFRTP), also known as carbon fiber, carbon comp ...

s, or as in of some Chinese FSW reentry vehicles,

oak An oak is a hardwood tree or shrub in the genus ''Quercus'' of the beech family. They have spirally arranged leaves, often with lobed edges, and a nut called an acorn, borne within a cup. The genus is widely distributed in the Northern Hemisp ...

wood Wood is a structural tissue/material found as xylem in the stems and roots of trees and other woody plants. It is an organic materiala natural composite of cellulosic fibers that are strong in tension and embedded in a matrix of lignin t ...

. In general, the constraints and goals for atmospheric reentry conflict with those for other high-speed flight applications; during reentry a high-drag blunt reentry shape is frequently used, which minimises the

heat transfer Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, ...

by creating a

shock wave In physics, a shock wave (also spelled shockwave), or shock, is a type of propagating disturbance that moves faster than the local speed of sound in the medium. Like an ordinary wave, a shock wave carries energy and can propagate through a me ...

that stands off from the vehicle, but some very-high-temperature materials may permit sharper-edged designs.

Nose cone design

Given the problem of the

aerodynamic Aerodynamics () is the study of the motion of atmosphere of Earth, air, particularly when affected by a solid object, such as an airplane wing. It involves topics covered in the field of fluid dynamics and its subfield of gas dynamics, and is an ...

design A design is the concept or proposal for an object, process, or system. The word ''design'' refers to something that is or has been intentionally created by a thinking agent, and is sometimes used to refer to the inherent nature of something ...

of the nose cone section of any vehicle or body meant to travel through a compressible fluid medium (such as a

missile A missile is an airborne ranged weapon capable of self-propelled flight aided usually by a propellant, jet engine or rocket motor. Historically, 'missile' referred to any projectile that is thrown, shot or propelled towards a target; this ...

bullet A bullet is a kinetic projectile, a component of firearm ammunition that is shot from a gun barrel. They are made of a variety of materials, such as copper, lead, steel, polymer, rubber and even wax; and are made in various shapes and constru ...

), an important problem is the determination of the nose cone geometrical shape for optimum performance. For many applications, such a task requires the definition of a

shape that experiences minimal resistance to rapid motion through such a fluid medium, which consists of elastic particles.

References

{{reflist Rocketry Aircraft components

Rockets

Aircraft

Supersonic

Nose cone design

See also

References