The M-class cruisers were a class of
light cruisers planned, but never built, by
Nazi Germany's ''
Kriegsmarine
The (, ) was the navy of Germany from 1935 to 1945. It superseded the Imperial German Navy of the German Empire (1871–1918) and the inter-war (1919–1935) of the Weimar Republic. The was one of three official branches, along with the a ...
'' before
World War II. The ships were designed for commerce raiding in the Atlantic Ocean. The design for the first four ships suffered from a number of problems, and so the fifth and sixth ships were substantially redesigned.
The name of the class is taken from the letter designating the first projected unit. As long as the ships were not named, they were referred to by letters assigned in the chronological order of their planned construction. The first planned unit would have been the thirteenth German cruiser and was therefore listed as ''cruiser M'' in the navy's documents. Had any of the ships been built, the class would have been named after the first completed unit.
Development and cancellation

In the early 1930s,
Adolf Hitler began a rearmament program in Germany. He signed the
Anglo-German Naval Agreement in 1935, which allowed Germany to build up its navy to 35 percent of the strength of the British
Royal Navy and effectively repudiated the restrictions of the
Treaty of Versailles on the German fleet. Versailles had limited the German fleet's cruiser strength to six vessels of
displacement.
The M class was intended for use as a scout for the
commerce raiding squadrons envisioned under German strategic thinking at the time, which would be formalized as the
Plan Z construction program. The ships design process started in 1936; the ships were intended for long-range commerce raiding. They were an improvement over previous designs like the and es, which suffered from insufficient range to be effective commerce raiders. However, the requirements placed on the design—high maximum and cruising speeds, long range, heavy armament, and armor sufficient to withstand shells, all on a displacement no more than were deemed impossible by the design staff. In July 1937, the (commander in chief of the navy) requested proposals from both the naval design staff as well as private dockyards. None of the designs by the dockyards were practical, and so the official design, which only met some of the requirements, was chosen.
During further development of the design, serious flaws became apparent, including the weakness of both the
main battery and anti-aircraft armament, as well as the insufficiently thick armor protection. The stepped arrangement of the
deck armor wasted space and was therefore impractical. The layout of the propulsion system was also problematic; both turbines were in the same engine room, and therefore each were vulnerable to disabling if the other was damaged. Their crew spaces were also insufficient for long-range cruises. As a result, the design was heavily modified for the last two ships of the class, Q and R. The initial design borrowed on contemporary British and French ships, the and , respectively. The distribution of the M-class ships' side armor was the most obvious influence of the ''Southampton''-class design.
The contract for M was assigned to ''
Deutsche Werke'' in
Kiel under the construction number 263. N followed at the
''Kriegsmarinewerft'' in
Wilhelmshaven, as number 129. O—construction number 606—was assigned to ''
Germaniawerft'' in Kiel, but on 8 August 1939, the contract was transferred to the Kriegsmarinewerft. P was also assigned to ''Germaniawerft'', under number 607. Q was assigned to
Schichau in
Danzig, and the contract for R was awarded to the ''Deutsche Werke''. Only the
keels for M and N were
laid—in 1938—but construction was halted on 19 and 21 September 1939, respectively, after the start of
World War II. Both
hulls were
broken up on the
stocks
Stocks are feet restraining devices that were used as a form of corporal punishment and public humiliation. The use of stocks is seen as early as Ancient Greece, where they are described as being in use in Solon's law code. The law describing ...
shortly thereafter.
Design
General characteristics

The first four M-class ships—M, N, O, and P—were
long at the waterline
A vessel's length at the waterline (abbreviated to L.W.L)Note: originally Load Waterline Length is the length of a ship or boat at the level where it sits in the water (the ''waterline''). The LWL will be shorter than the length of the boat over ...
, and
long overall. They had a
beam
Beam may refer to:
Streams of particles or energy
*Light beam, or beam of light, a directional projection of light energy
**Laser beam
*Particle beam, a stream of charged or neutral particles
**Charged particle beam, a spatially localized grou ...
of and a
draft of standard, forward, and aft. The ships had a designed displacement of , and would have displaced at
standard load and
fully laden. The last two ships—Q and R—were enlarged versions: long at the waterline and overall. Their beams were wider, at . Their draft was lower at . They were designed to displace , and would have displaced standard. Full load figures are not known.
All six ships were to have steel-made, and up to 85% welded construction. The design called for fifteen
watertight compartments and a
double bottom
A double hull is a ship Hull (watercraft), hull design and construction method where the bottom and sides of the ship have two complete layers of watertight hull surface: one outer layer forming the normal hull of the ship, and a second inner hull ...
for 78% of the length of the hull. The ships had a crew of 28 officers and 892 men. They were designed to carry one
picket boat, a barge, a
launch, and two
cutters
Cutter may refer to:
Tools
* Bolt cutter
* Box cutter, aka Stanley knife, a form of utility knife
* Cigar cutter
* Cookie cutter
* Glass cutter
* Meat cutter
* Milling cutter
* Paper cutter
* Side cutter
* Cutter, a type of hydraulic rescue to ...
. They would have carried a pair of
Arado Ar 196 seaplanes for reconnaissance, which would have been launched with a single
steam catapult.
All six ships were intended to use two sets of
Brown, Boveri & Cie and Wagner
steam turbine
A steam turbine is a machine that extracts thermal energy from pressurized steam and uses it to do mechanical work on a rotating output shaft. Its modern manifestation was invented by Charles Parsons in 1884. Fabrication of a modern steam turbin ...
s or Marine-type turbines built by Germaniawerft and four
MAN double-acting 12-cylinder two-stroke
diesel engines. Q and R however, were to be equipped with an additional four diesels, for a total of eight. The turbines were powered by four Wagner ultra-high pressure
water-tube boilers, designed to put out 58 atmospheres of pressure. The propulsion system drove three screws, although four were considered for Q and R. The ships' electrical power was supplied by four generators that produced 2,400 kW at 220
volts.
Armament and armor

All six ships were armed with the same set of weaponry. The primary armament consisted of eight
15 cm L/55 quick-firing guns mounted in four twin
turrets
Turret may refer to:
* Turret (architecture), a small tower that projects above the wall of a building
* Gun turret, a mechanism of a projectile-firing weapon
* Objective turret, an indexable holder of multiple lenses in an optical microscope
* M ...
, in superfiring pairs fore and aft. The guns had a total of 960 shells, for 120 rounds per gun. The 15 cm twin turrets were Drh L. C/34 mounts—the same type as those fitted to the - and s, as well as a number of other designs. The turrets allowed depression to -10 degrees and elevation to 40 degrees, which enabled a maximum range of . The 15 cm guns had a rate of fire of between 6 and 8 rounds per minute, at a
muzzle velocity
Muzzle velocity is the speed of a projectile (bullet, pellet, slug, ball/shots or shell) with respect to the muzzle at the moment it leaves the end of a gun's barrel (i.e. the muzzle). Firearm muzzle velocities range from approximately to i ...
of 875 meters per second (2,871 ft/s). The guns used two propellant charges: a RPC/38 fore charge and a main charge in a brass cartridge.
The ships carried four
8.8 cm L/76 anti-aircraft gun
Anti-aircraft warfare, counter-air or air defence forces is the battlespace response to aerial warfare, defined by NATO as "all measures designed to nullify or reduce the effectiveness of hostile air action".AAP-6 It includes surface based, ...
s in two twin turrets, aft of the main
superstructure
A superstructure is an upward extension of an existing structure above a baseline. This term is applied to various kinds of physical structures such as buildings, bridges, or ships.
Aboard ships and large boats
On water craft, the superstruct ...
. The 8.8 cm guns were supplied with 1,600 shells, for 400 rounds per gun. These guns fired
high explosive shells at a
rate of fire
Rate of fire is the frequency at which a specific weapon can fire or launch its projectiles. This can be influenced by several factors, including operator training level, mechanical limitations, ammunition availability, and weapon condition. In m ...
of 15 to 20 rounds per minute and a muzzle velocity of 950 m/s (3,117 ft/s). The guns could elevate to 80 degrees, which allowed them to hit targets flying at .
The M-class ships were also equipped with eight
3.7 cm AA guns in twin mounts centered on the superstructure. They had a total of 9,600 shells. The anti-aircraft weaponry was supplemented with four
2 cm guns, each of which had 2,000 rounds. The ships were also armed with eight deck-mounted
torpedo tubes and approximately 60
mines.
The ships were to have been protected with
Krupp
The Krupp family (see pronunciation), a prominent 400-year-old German dynasty from Essen, is notable for its production of steel, artillery, ammunition and other armaments. The family business, known as Friedrich Krupp AG (Friedrich Krup ...
and ("
Wotan", Hard) armor plating. The inner layer of the
armor belt was 50 mm thick in critical areas amidships, and tapered down to zero protection at the stern and bow. The outer layer was 30 mm amidships; also tapering down to zero at both ends of the ships. The flat portion of the decks were 20 mm thick, with 35 mm thick sloped sides that connected to the bottom of the belt armor. The
conning tower
A conning tower is a raised platform on a ship or submarine, often armored, from which an officer in charge can conn the vessel, controlling movements of the ship by giving orders to those responsible for the ship's engine, rudder, lines, and gro ...
had a roof that was 50 mm thick and sides 100 mm thick. The gun turrets had the same armor protection as the preceding light cruiser : the sides were 35 mm thick, the faces were 80 mm thick, the roofs ranged in thickness from 20–35 mm. The armor protecting the turret
barbettes was 60 mm thick.
Footnotes
References
*
*
*
Further reading
*
{{Good article
Plan Z
Cruiser classes
Cruisers of the Kriegsmarine
Proposed ships of Germany