LMP3
   HOME

TheInfoList



OR:

A Le Mans Prototype (LMP) is a type of
sports prototype A sports prototype, sometimes referred to simply as a prototype, is a type of Auto racing, race car that is used in high-level categories of sports car racing. They are purpose-built auto-sports race cars, as opposed to production-car based or s ...
race car used in various races and championships, including the
24 Hours of Le Mans The 24 Hours of Le Mans () is an endurance-focused Sports car racing, sports car race held annually near the city of Le Mans, France. It is widely considered to be one of the world's most prestigious races, and is one of the races—along with ...
,
FIA World Endurance Championship The FIA World Endurance Championship, abbreviated as WEC, is a world championship for automobile endurance racing organized by the Automobile Club de l'Ouest (ACO) and sanctioned by the Fédération Internationale de l'Automobile (FIA). The se ...
,
IMSA SportsCar Championship The IMSA SportsCar Championship, currently known as the IMSA WeatherTech SportsCar Championship under sponsorship, is a sports car racing series based in the United States and Canada and organized by the International Motor Sports Association (I ...
,
European Le Mans Series The European Le Mans Series (abbreviated as ELMS) is a European sports car racing endurance series inspired by the 24 Hours of Le Mans race and organized by the Automobile Club de l'Ouest (ACO). The European Le Mans Series is similar to the fo ...
, and
Asian Le Mans Series The Asian Le Mans Series (ALMS) is an Asian sports car racing endurance series created by the Automobile Club de l'Ouest (ACO) and based in Asia. It is the successor to the defunct Japan Le Mans Challenge which folded in 2007 after its second s ...
. Le Mans Prototypes were created by the
Automobile Club de l'Ouest The Automobile Club de l'Ouest (English: Automobile Club of the West), sometimes abbreviated to ACO, is the largest automotive group in France. It was founded in 1906 by car building and racing enthusiasts, and is most famous for being the organ ...
(ACO). The technical requirements for an LMP include bodywork covering all mechanical elements of the car. there are two classes within Le Mans Prototypes, designated LMP2 and LMP3. While not as fast as
open-wheel An open-wheel car is a car with the wheels outside the car's main body, and usually having only one seat. Open-wheel cars contrast with street cars, sports cars, stock cars, and touring cars, which have their wheels below the body or inside fend ...
Formula One cars around a track, the LMP1s were the fastest closed-wheel racing cars used in circuit racing. Le Mans Prototypes are considered a class above production-based
grand tourer A grand tourer (GT) is a type of car that is designed for high speed and long-distance driving with performance and luxury. The most common format is a Front-engine, rear-wheel-drive layout, front-engine, rear-wheel-drive two-door coupé with ...
cars, which compete alongside them in
sports car racing Sports car racing is a form of motorsport road racing that uses sports cars with two seats and enclosed wheels. They may be either purpose-built Sports prototype, sports prototypes, which are the highest level in sports car racing; or grand to ...
. Later, LMP1 designs included
hybrid cars A hybrid vehicle is one that uses two or more distinct types of power, such as submarines that use diesel when surfaced and batteries when submerged. Other means to store energy include pressurized fluid in hydraulic hybrids. Hybrid powertrain ...
that use electric motors to assist acceleration. The Le Mans Prototype LMP1 class has been replaced by
Le Mans Hypercar A Le Mans Hypercar (LMH) is a type of sports prototype race car that competes alongside LMDh entries in the Hypercar class of the FIA World Endurance Championship. It also competes in the Grand Touring Prototype (GTP) class of the IMSA SportsC ...
s in the FIA World Endurance Championship (WEC) and in the 24 Hours of Le Mans from the
2021 season 1 (one, unit, unity) is a number, numeral, and glyph. It is the first and smallest positive integer of the infinite sequence of natural numbers. This fundamental property has led to its unique uses in other fields, ranging from science to sp ...
. Non-hybrid LMP1 cars were eligible to be "grandfathered" for two more seasons and compete alongside the new class for the 2021 to 2022 seasons. Starting from the 2023 season of WEC and IMSA SportsCar Championship, Le Mans Hypercars are joined by
Le Mans Daytona h LMDh (Le Mans Daytona h) is a set of sports prototype regulations used alongside Le Mans Hypercar (LMH) in both the Grand Touring Prototype (GTP) class of the IMSA SportsCar Championship and the Hypercar class of the FIA World Endurance Championsh ...
(LMDh) cars. These two kinds of prototypes will form the top class of endurance racing: in WEC and ''Grand Touring Prototype (GTP)'' in IMSA.


Name variations

Le Mans Prototypes have used various names depending on the series in which they compete. The FIA's equivalent cars were referred to as ''Sports Racers'' (SR) or ''Sports Racing Prototypes'' (SRP). The American
IMSA GT Championship IMSA GT was a sports car racing series organized by International Motor Sports Association. Races took place primarily in the United States and occasionally in Canada. History The series was founded in 1969 by John and Peggy Bishop, and Bill ...
termed their cars ''World Sports Cars'' (WSC), while the short-lived
United States Road Racing Championship The United States Road Racing Championship (USRRC) was a Sports Car Club of America series for professional racing drivers. SCCA Executive Director John Bishop helped to create the series in 1962 to recover races that had been taken by rival USAC R ...
(USRRC) used the classic ''Can-Am'' (CA) name for their prototypes. Since 2004, most series have switched to referring to these cars as ''Le Mans Prototypes''. The
American Le Mans Series The American Le Mans Series (ALMS) was a sports car racing series based in the United States and Canada. It consisted of a series of Endurance racing (motorsport), endurance and sprint races, and was created in the spirit of the 24 Hours of Le M ...
, the successor to the IMSA GT Championship and the predecessor of the TUDOR United SportsCar Championship, officially referred to the cars simply as ''Prototypes'' (P1, P2, or PC). An LMP is commonly referred to as a ''Le Mans car'' in the media.


History

The first use of what would become Le Mans Prototypes was at the
1992 24 Hours of Le Mans The 1992 24 Hours of Le Mans was the 60th Grand Prix of Endurance, taking place at the Circuit de la Sarthe, France, on the 20 and 21 June 1992. It was also the third round of the 1992 World Sportscar Championship season, 1992 FIA Sportscar Worl ...
. In an attempt to increase the number of entrants beyond the small field of
Group C Group C was a category of sports car racing introduced by the FIA in 1982 and continuing until 1993, with ''Group A'' for Touring car racing, touring cars and ''Group B'' for Grand tourer, GTs. It was designed to replace both Group 5 (motorspor ...
competitors that the
World Sportscar Championship The World Sportscar Championship was the world Endurance racing (motorsport), endurance racing series run for sports car racing, sanctioned by the Fédération Internationale de l'Automobile (FIA), from 1953 World Sportscar Championship, 1953 t ...
had to offer, older
Porsche 962 The Porsche 962 is a sports prototype racing car designed and built by Porsche. Created to replace the Porsche 956, 962 was introduced at the end of 1984 and replaced the 956 in the International Motor Sports Association, IMSA's IMSA GT Champio ...
s were allowed entry in Category 3. To further increase the size of the field, small open-cockpit race cars using production road car engines which were raced in small national championships were allowed in Category 4. Later, ACO announced its intentions to completely replace the Group C cars with ''Le Mans Prototypes''. Two classes were created, with LMP1s running large displacement custom-built engines that were usually turbocharged, and LMP2s using the smaller displacement production-based engines. Both classes were required to have open cockpits. However, LMP1 cars that year were just former Group C cars, some still with closed cockpits (
Toyota 94C-V The Toyota 92C-V was a prototype racing car built by Toyota as a Group C car, and later as an LMP car. It raced in the 24 Hours of Le Mans for three years. It also took part in the final year of the All Japan Sports Prototype Championship during ...
,
Courage C32 The Courage C30, also known as the Courage C30LM, was a Group C2 sports prototype, designed, developed and built by French manufacturer Courage in 1993. It famously contested in the 1993 24 Hours of Le Mans, with drivers Derek Bell and Pierre ...
,
Kremer K8 Spyder The Kremer K8 Spyder, along with its predecessor, the K7 (1992–1993), were open-cockpit prototypes built by Kremer Racing for use in multiple sportscar series, such as the IMSA GT Championship, Interserie, and International Sports Racing Series ...
, Porsche 962C GTI, ALD C289 and Alpa LM). At the same time, the IMSA GT Championship announced the end of their closed cockpit GTP and Lights classes, deciding as well to replace them with a single open-cockpit class of ''World Sports Cars'' equivalent to LMP1. This formula continued up to 1996, with many manufacturers embracing the LMP and WSC classes, including
Ferrari Ferrari S.p.A. (; ) is an Italian luxury sports car manufacturer based in Maranello. Founded in 1939 by Enzo Ferrari (1898–1988), the company built Auto Avio Costruzioni 815, its first car in 1940, adopted its current name in 1945, and be ...
,
Porsche Dr. Ing. h.c. F. Porsche AG, usually shortened to Porsche (; see below), is a German automobile manufacturer specializing in luxury, high-performance sports cars, SUVs and sedans, headquartered in Stuttgart, Baden-Württemberg, Germany. Th ...
, and
Mazda is a Japanese Multinational corporation, multinational automotive manufacturer headquartered in Fuchū, Hiroshima (town), Fuchū, Hiroshima Prefecture, Hiroshima, Japan. The company was founded on January 30, 1920, as Toyo Cork Kogyo Co., Ltd. ...
. In 1997, the first European series based around Le Mans Prototypes was launched, known as the "
International Sports Racing Series The FIA Sportscar Championship was a sports car racing series created by John Mangoletsi and got the approval of the Fédération Internationale de l'Automobile (FIA) in 2001. It was a series similar to the FIA GT Championship, concentrating on two ...
". Using classes similar to LMP1/WSC and LMP2, these cars were known as "SR1" and "SR2" by the FIA. 1998 saw the creation of another series of Le Mans Prototypes, with the new United States Road Racing Championship attempting to break away from the IMSA GT Championship. To differ from IMSA'S WSC class, the USRRC named their open-cockpit prototypes "
Can-Am The Canadian-American Challenge Cup, or Can-Am, was an SCCA/ CASC sports car racing series from 1966 to 1974, and again from 1977 to 1987. The Can-Am rules were deliberately simple and placed few limits on the entries. This led to a wide variet ...
" in an attempt to resurrect the sportscar championship of the 1970s. However, the USRRC collapsed before the end of 1999, with the series becoming the
Rolex Sports Car Series The Rolex Sports Car Series was the premier series run by the Grand American Road Racing Association. It was a North American-based sports car series founded in 2000 under the name Grand American Road Racing Championship to replace the failed ...
chose to use the FIA's SR1 and SR2 formula instead. 1998 saw a great expansion for the ACO's LMP classes. Following the cancellation of the IMSA GT Championship at the end of 1998, the ACO allowed for the creation of the American Le Mans Series. This series used the same class structure as the 24 Hours of Le Mans, meaning it was the first championship to use the LMP name. At the same time, the ACO greatly altered their LMP classes. The smaller LMP2 class were briefly eliminated, while a new class of closed-cockpit prototypes was allowed in, known as "LMGTP" (Le Mans grand touring prototype). These cars were evolutions of production-based road cars that the ACO considered too advanced and too fast to fall under the GT class regulations, forcing the ACO to promote them as prototypes. In 2017, in order to limit the costs, FIA introduced a new set of LMP2 regulations, which will be locked in through 2020, aiming for a significant power increase, to the range of 150
horsepower Horsepower (hp) is a unit of measurement of power, or the rate at which work is done, usually in reference to the output of engines or motors. There are many different standards and types of horsepower. Two common definitions used today are t ...
(which is expected to lead to a four-second decrease in lap time at Le Mans).
Gibson Technology Gibson Technology is an automotive and motorsport company based at Repton, Derbyshire, England. It was founded by Bill Gibson and Brian Mason as Zytek Engineering in 1981. Ownership history In 1981 Gibson and Mason founded the Zytek Group wi ...
is the exclusive engine supplier for LMP2, producing a four-litre normally-aspirated V8.


Technical regulations

Biofuel Biofuel is a fuel that is produced over a short time span from Biomass (energy), biomass, rather than by the very slow natural processes involved in the formation of fossil fuels such as oil. Biofuel can be produced from plants or from agricu ...
s, specifically petrol with 10% ethanol and
biodiesel Biodiesel is a renewable biofuel, a form of diesel fuel, derived from biological sources like vegetable oils, animal fats, or recycled greases, and consisting of long-chain fatty acid esters. It is typically made from fats. The roots of bi ...
( BTL), are allowed in both LMP1 and LMP2 categories.


LMP1

The fuel tank size and minimum weight for non-hybrid cars was subject to adjustment to reduce the difference in performance between hybrid and non-hybrid cars. There were no limits on the number of
cylinders A cylinder () has traditionally been a three-dimensional solid, one of the most basic of curvilinear geometric shapes. In elementary geometry, it is considered a prism with a circle as its base. A cylinder may also be defined as an infinite ...
for any type of engine. Bodywork was required to cover all mechanical elements of the car, so that they couldn't be visible when the car is viewed directly from the front, side, or top. The LMP1 cars were generally the most powerful, with higher straight-line speeds. The LMP1 category was retired at the end of the 2020 season, replaced by a new top class of the endurance racing: ''Hypercar''.


LMP2

From 2017, in order to limit the costs, FIA introduced a new set of regulations, which will be locked in through 2027. The rules allow a significant power increase (150 horsepower) which is expected to lead to a four-second decrease in lap time at Le Mans. Gibson Technology is the exclusive engine supplier, producing a 4.2-litre naturally-aspirated V8. In seasons 2017 through 2020, the engine produced about 600 
bhp BHP Group Limited, founded as the Broken Hill Proprietary Company, is an Australian multinational mining and metals corporation. BHP was established in August 1885 and is headquartered in Melbourne, Victoria. As of 2024, BHP was the worldâ ...
.
Dallara Dallara Group S.r.l. is the largest multi-national Italian race car manufacturer, founded by its current President, Giampaolo Dallara. After working for Ferrari, Maserati, Lamborghini and De Tomaso, in 1972 in his native village of Varano de' M ...
,
Onroak Automotive Ligier Automotive, formerly Onroak Automotive, is a French company which designs, manufacturers, and sells auto racing, racing cars, specifically sports prototypes for various international series. Onroak was founded in 2012 by Jacques Nicolet w ...
(Ligier),
Oreca ORECA (Organisation Exploitation Compétition Automobiles) is a French auto racing, racing team and race car constructor, founded in 1973 and run by Hugues de Chaunac, former team manager of F1 team Automobiles Gonfaronnaises Sportives, AGS. Or ...
and the joint-venture Riley Tech/
Multimatic Multimatic Inc. is a privately held Canadian corporation that supplies components, systems and engineering services to the global automotive industry. Headquartered in Markham, Ontario, Multimatic has manufacturing divisions and engineering facili ...
were selected by FIA as the four exclusive chassis constructors, which must be closed-cockpit designs. Before the start of the 2021 season LMP2 cars have been slowed down to ensure the necessary lap time difference between the LMP2 and a new class—Hypercar. In the original version of the new ruleset, revealed in November 2020, only the power of the Gibson engine has been reduced—to 560 bhp. Right before the start of the season, the cars were further weakened, by trimming an additional 20 bhp to a total of 540 bhp. The minimum weight of the cars has also been increased by 20 kg and has been set at 950 kg. Furthermore, mirroring the Hypercar category, a single aero kit has been made mandatory across the whole season and is limited to the Le Mans specification in the WEC; the ELMS teams have retained the right to switch between the aero kits. Oreca and Ligier were once again chosen as the constructors for the 2028 regulations, with Gibson set to continue supplying the engines.


LMP3

LMP3 is an entry-level prototype class intended for introducing young drivers and new teams to endurance racing before they progress to the higher classes of prototype racing, LMP2 and ultimately Hypercar. LMP3 uses closed-cockpit chassis, which can be built by any licensed constructor, with costs capped for the chassis, engine, and generational upgrade kits.


Gen 1

Cars eligible for the 2015–2019 first-generation ruleset were the
Ginetta-Juno P3 The Ginetta-Juno P3-15, also known as the Ginetta-Juno P3 is a Le Mans Prototype LMP3 built to Automobile Club de l'Ouest, ACO Le Mans Prototype LMP3 regulations. It was designed by Ewan Baldry, and built by Ginetta Cars. The car was the first ca ...
,
Ligier JS P3 The Ligier JS P3 is an LMP3 Le Mans Prototype. It was created by Onroak Automotive, and named in partnership with former French driver Guy Ligier. It was built to meet ACO LMP3 standards, and is active in various LMP3 championships worldwide, suc ...
,
Norma M30 The Norma M30 is an LMP3-spec sports prototype. The car is built by French constructor Norma Auto Concept and designed by company co-founder Norbert Santos. The Norma M30 won the 2017 Michelin Le Mans Cup in its debut year entered by DKR Enginee ...
,
ADESS-03 The ADESS-03 is a Le Mans Prototype LMP3 built to ACO Le Mans Prototype LMP3 regulations. It was designed and built by ADESS AG. The car had its competition debut at the 2015 2 Hours of Fuji. The car also serves as a base for the GreenGT LMPH2 ...
, and the Ave-Riley AR-2. The cars were eligible in a number of series, such as the Asian Le Mans Series, the European Le Mans Series, as well as the V de V Endurance Series and the
IMSA Prototype Challenge IMSA Prototype Challenge (formerly IMSA Prototype Lites) was a racing series featuring two classes of single-seat prototype cars racing simultaneously. The series was sanctioned by the International Motor Sports Association (IMSA). Most races we ...
. A number of championships for the class have also been created, such as the FRD LMP3 series and the British LMP3 Cup. First-generation cars were powered by a 5.0-litre normally-aspirated Nissan VK50 V8 engine, producing . Minimum weight was originally , before being increased to due to an unexpectedly heavy powertrain package.


Gen 2

A 2nd Generation ruleset was introduced for 2020, with new cars introduced: the
Ginetta G61-LT-P3 The Ginetta G61-LT-P3 is a Le Mans Prototype LMP3 built to ACO Le Mans Prototype LMP3 regulations. It was designed, and built by Ginetta Cars. The car is the successor to the original Ginetta-Juno P3-15, which was the first LMP3 Prototype. The ...
,
Ligier JS P320 The Ligier JS P320 is an LMP3 Le Mans Prototype. It was created by Onroak Automotive, and named in partnership with former French driver Guy Ligier. It was built to meet ACO Generation II LMP3 standards, and can be built through an update kit for ...
,
Duqueine D-08 The Duqueine D08 is a Le Mans Prototype LMP3 built to Automobile Club de l'Ouest, ACO 2020 2nd Generation Le Mans Prototype LMP3 regulations. It was designed, and built by Duqueine Team, Duqueine Engineering, which bought out Norma Auto Concept. T ...
, and the
ADESS-03 Evo The ADESS-03 is a Le Mans Prototype LMP3 built to ACO Le Mans Prototype LMP3 regulations. It was designed and built by ADESS AG. The car had its competition debut at the 2015 2 Hours of Fuji. The car also serves as a base for the GreenGT LMPH2G ...
. These cars can be built from its predecessors using an upgrade kit. The new LMP3 prototypes are used in Asian Le Mans Series,
Michelin Le Mans Cup The Le Mans Cup, previously the GT3 Le Mans Cup and currently known as the Michelin Le Mans Cup under sponsorship, is an international sports car racing endurance series inspired by the 24 Hours of Le Mans race and organized by the Automobile Club ...
,
IMSA VP Racing SportsCar Challenge The IMSA VP Racing Sportscar Challenge is a North American auto racing series for LMP3, GT3 (run as the GTDX class), and GT4 (run as the GSX class) vehicles. The series is sanctioned by IMSA and is usually run as support races for the IMSA Spor ...
, European Le Mans Series, and Prototype Cup Germany. For the second generation, engines were upgraded to the 5.6-litre Nissan VK56, increasing horsepower to .


Gen 3

For 2025, the engines used in the class are set to be replaced with a twin-turbocharged 3.5-litre Toyota V35A with modified turbochargers and a dry sump oiling system, bringing about a power increase to . The same gearbox is retained with the same gear ratios, but the bell housing has been changed to accommodate the new engine. Due to the new engine and cooling package, the weight limit was increased to , necessitating a crash test. New cars will be introduced: the
Ginetta G61-LT-P3 Evo The Ginetta G61-LT-P3 is a Le Mans Prototype LMP3 built to ACO Le Mans Prototype LMP3 regulations. It was designed, and built by Ginetta Cars. The car is the successor to the original Ginetta-Juno P3-15, which was the first LMP3 Prototype. The ...
,
Ligier JS P325 The Ligier JS P325 is a Le Mans Prototype LMP3 race car designed, developed and built by French manufacturer Ligier to ACO 2025 3rd Generation Le Mans Prototype LMP3 regulations. The car is successor to the Ligier JS P320 and can be built from ...
,
Duqueine D09 The Duqueine D09 is a Le Mans Prototype built to ACO 2025 3rd Generation LMP3 regulations. It was designed, and built by Duqueine Engineering. The car is the successor to the Duqueine D08. The car is set to be eligible in a series of Champions ...
, and the
ADESS AD25 The ADESS AD25 is a Le Mans Prototype LMP3 race car designed, developed and built by Portuguese manufacturer ADESS to ACO 2025 3rd Generation Le Mans Prototype LMP3 regulations. The car is successor to the ADESS-03 Evo and can be built from i ...
.


LMPC

LMPC (
Le Mans Prototype Challenge The Le Mans Prototype Challenge (shortened to LMP Challenge or LMPC) was a spec sports prototype formula created by the Automobile Club de l'Ouest (ACO), organisers of the 24 Hours of Le Mans, and sports car constructor Oreca. The formula is in ...
) was an earlier entry level class, introduced in 2009, consisting of competitors running identical Oreca FLM09 cars. The class was dropped in European Le Mans Series in
2014 The year 2014 was marked by the surge of the Western African Ebola epidemic, West African Ebola epidemic, which began in 2013, becoming the List of Ebola outbreaks, most widespread outbreak of the Ebola, Ebola virus in human history, resul ...
. As the cost of running an LMPC team was found to be comparable to that for an LMP2 team, the class was dropped after the 2017 season in the WeatherTech SportsCar Championship.


See also

* List of Le Mans Prototypes *
Daytona Prototype A Daytona Prototype was a type of sports prototype racing car developed specifically for the Grand-Am Road Racing, Grand American Road Racing Association's Rolex Sports Car Series as their top class of car, which replaced their main prototype rac ...
*
Daytona Prototype International A Daytona Prototype International (DPi) was a type of sports prototype racing car developed specifically for the International Motor Sports Association's WeatherTech SportsCar Championship, as their top class of car, acting as a direct replaceme ...
(DPi) *
Formula Le Mans The Le Mans Prototype Challenge (shortened to LMP Challenge or LMPC) was a spec sports prototype formula created by the Automobile Club de l'Ouest (ACO), organisers of the 24 Hours of Le Mans, and sports car constructor Oreca. The formula is inte ...
*
Group 6 Group 6 may refer to: * Group 6 element, chemical element classification * Group 6 (motorsport), FIA classification for sports car racing * Group 6 Rugby League, rugby league competition in New South Wales, Australia {{disambig ...
*
Japan Le Mans Challenge The Japan Le Mans Challenge (abbreviated JLMC) was an endurance sportscar series based in Japan built around the 24 Hours of Le Mans that began in 2006. It was run by the Sports Car Endurance Race Operation (SERO) sanctioning body and ran under th ...


References


External links

* {{Class of Auto racing
Prototype A prototype is an early sample, model, or release of a product built to test a concept or process. It is a term used in a variety of contexts, including semantics, design, electronics, and Software prototyping, software programming. A prototype ...
Racing car classes Sports car racing