HOME

TheInfoList



OR:

In
differential topology In mathematics, differential topology is the field dealing with the topological properties and smooth properties of smooth manifolds. In this sense differential topology is distinct from the closely related field of differential geometry, which ...
, the jet bundle is a certain construction that makes a new smooth
fiber bundle In mathematics, and particularly topology, a fiber bundle (or, in Commonwealth English: fibre bundle) is a space that is a product space, but may have a different topological structure. Specifically, the similarity between a space E and a p ...
out of a given smooth fiber bundle. It makes it possible to write differential equations on sections of a fiber bundle in an invariant form. Jets may also be seen as the coordinate free versions of Taylor expansions. Historically, jet bundles are attributed to
Charles Ehresmann Charles Ehresmann (19 April 1905 – 22 September 1979) was a German-born French mathematician who worked in differential topology and category theory. He was an early member of the Bourbaki group, and is known for his work on the differential ...
, and were an advance on the method ( prolongation) of Élie Cartan, of dealing ''geometrically'' with higher derivatives, by imposing
differential form In mathematics, differential forms provide a unified approach to define integrands over curves, surfaces, solids, and higher-dimensional manifolds. The modern notion of differential forms was pioneered by Élie Cartan. It has many applications, ...
conditions on newly introduced formal variables. Jet bundles are sometimes called sprays, although sprays usually refer more specifically to the associated vector field induced on the corresponding bundle (e.g., the geodesic spray on Finsler manifolds.) Since the early 1980s, jet bundles have appeared as a concise way to describe phenomena associated with the derivatives of maps, particularly those associated with the
calculus of variations The calculus of variations (or Variational Calculus) is a field of mathematical analysis that uses variations, which are small changes in functions and functionals, to find maxima and minima of functionals: mappings from a set of functions t ...
. Consequently, the jet bundle is now recognized as the correct domain for a geometrical covariant field theory and much work is done in
general relativistic General relativity, also known as the general theory of relativity and Einstein's theory of gravity, is the geometric theory of gravitation published by Albert Einstein in 1915 and is the current description of gravitation in modern physics. G ...
formulations of fields using this approach.


Jets

Suppose ''M'' is an ''m''-dimensional
manifold In mathematics, a manifold is a topological space that locally resembles Euclidean space near each point. More precisely, an n-dimensional manifold, or ''n-manifold'' for short, is a topological space with the property that each point has a n ...
and that (''E'', π, ''M'') is a
fiber bundle In mathematics, and particularly topology, a fiber bundle (or, in Commonwealth English: fibre bundle) is a space that is a product space, but may have a different topological structure. Specifically, the similarity between a space E and a p ...
. For ''p'' ∈ ''M'', let Γ(p) denote the set of all local sections whose domain contains ''p''. Let be a multi-index (an ''m''-tuple of non-negative integers, not necessarily in ascending order), then define: :\begin , I, &:= \sum_^m I(i) \\ \frac &:= \prod_^m \left( \frac \right)^. \end Define the local sections σ, η ∈ Γ(p) to have the same ''r''-jet at ''p'' if : \left.\frac\_ = \left.\frac\_, \quad 0 \leq , I, \leq r. The relation that two maps have the same ''r''-jet is an
equivalence relation In mathematics, an equivalence relation is a binary relation that is reflexive, symmetric and transitive. The equipollence relation between line segments in geometry is a common example of an equivalence relation. Each equivalence relation ...
. An ''r''-jet is an
equivalence class In mathematics, when the elements of some set S have a notion of equivalence (formalized as an equivalence relation), then one may naturally split the set S into equivalence classes. These equivalence classes are constructed so that elements a ...
under this relation, and the ''r''-jet with representative σ is denoted j^r_p\sigma. The integer ''r'' is also called the order of the jet, ''p'' is its source and σ(''p'') is its target.


Jet manifolds

The ''r''-th jet manifold of π is the set :J^r (\pi) = \left \. We may define projections ''πr'' and ''π''''r'',0 called the source and target projections respectively, by :\begin \pi_r: J^r(\pi) \to M \\ j^r_p\sigma \mapsto p \end, \qquad \begin \pi_: J^r(\pi) \to E \\ j^r_p\sigma \mapsto \sigma(p) \end If 1 ≤ ''k'' ≤ ''r'', then the ''k''-jet projection is the function ''πr,k'' defined by :\begin \pi_: J^r(\pi) \to J^(\pi) \\ j^r_p\sigma \mapsto j^_p\sigma \end From this definition, it is clear that ''πr'' = ''π'' o ''π''''r'',0 and that if 0 ≤ ''m'' ≤ ''k'', then ''πr,m'' = ''πk,m'' o ''πr,k''. It is conventional to regard ''πr,r'' as the identity map on ''J r''(''π'') and to identify ''J'' 0(''π'') with ''E''. The functions ''πr,k'', ''π''''r'',0 and ''πr'' are smooth
surjective In mathematics, a surjective function (also known as surjection, or onto function) is a function that every element can be mapped from element so that . In other words, every element of the function's codomain is the image of one element of i ...
submersions. A
coordinate system In geometry, a coordinate system is a system that uses one or more numbers, or coordinates, to uniquely determine the position of the points or other geometric elements on a manifold such as Euclidean space. The order of the coordinates is sig ...
on ''E'' will generate a coordinate system on ''J r''(''π''). Let (''U'', ''u'') be an adapted coordinate chart on ''E'', where ''u'' = (''xi'', ''uα''). The induced coordinate chart (''Ur'', ''ur'') on ''J r''(''π'') is defined by :\begin U^r &= \left\ \\ u^r &= \left(x^i, u^\alpha, u^\alpha_I\right) \end where :\begin x^i\left(j^r_p\sigma\right) &= x^i(p) \\ u^\alpha\left(j^r_p\sigma\right) &= u^\alpha(\sigma(p)) \end and the n \left(\binom - 1\right) functions known as the derivative coordinates: :\begin u^\alpha_I:U^k \to \mathbf \\ u^\alpha_I\left(j^r_p\sigma\right) = \left.\frac\_p \end Given an atlas of adapted charts (''U'', ''u'') on ''E'', the corresponding collection of charts (''U r'', ''u r'') is a
finite-dimensional In mathematics, the dimension of a vector space ''V'' is the cardinality (i.e., the number of vectors) of a basis of ''V'' over its base field. p. 44, §2.36 It is sometimes called Hamel dimension (after Georg Hamel) or algebraic dimension to disti ...
''C'' atlas on ''J r''(''π'').


Jet bundles

Since the atlas on each J^r(\pi) defines a manifold, the triples ''(J^r(\pi), \pi_, J^k(\pi))'', ''(J^r(\pi), \pi_, E)'' and ''(J^r(\pi), \pi_, M)'' all define fibered manifolds. In particular, if ''(E, \pi, M)''is a fiber bundle, the triple ''(J^r(\pi), \pi_, M)'' defines the ''r''-th jet bundle of π. If ''W'' ⊂ ''M'' is an open submanifold, then : J^r \left(\pi, _\right) \cong \pi^_r(W).\, If ''p'' ∈ ''M'', then the fiber \pi^_r(p)\, is denoted J^r_p(\pi). Let σ be a local section of π with domain ''W'' ⊂ ''M''. The ''r''-th jet prolongation of σ is the map j^r\sigma: W \rightarrow J^r(\pi) defined by : (j^r \sigma)(p) = j^r_p \sigma. \, Note that \pi_r \circ j^r \sigma =\mathbb_W, so j^r\sigma really is a section. In local coordinates, j^r\sigma is given by : \left(\sigma^\alpha, \frac\right) \qquad 1 \leq , I, \leq r. \, We identify ''j^ 0\sigma'' with \sigma .


Algebraic-geometric perspective

An independently motivated construction of the sheaf of sections \Gamma J^k\left(\pi_\right)'' is given''.'' Consider a diagonal map \Delta_n: M \to \prod_^ M, where the smooth manifold M is a
locally ringed space In mathematics, a ringed space is a family of (commutative) rings parametrized by open subsets of a topological space together with ring homomorphisms that play roles of restrictions. Precisely, it is a topological space equipped with a sheaf of ...
by C^k(U) for each open U. Let \mathcal be the ideal sheaf of \Delta_n(M), equivalently let \mathcal be the sheaf of smooth germs which vanish on \Delta_n(M) for all 0 < n \leq k. The pullback of the
quotient sheaf In mathematics, a sheaf is a tool for systematically tracking data (such as sets, abelian groups, rings) attached to the open sets of a topological space and defined locally with regard to them. For example, for each open set, the data could ...
^*\left(\mathcal/\mathcal^\right) from \prod_^ M to M by \Delta_n is the sheaf of k-jets. The
direct limit In mathematics, a direct limit is a way to construct a (typically large) object from many (typically smaller) objects that are put together in a specific way. These objects may be groups, rings, vector spaces or in general objects from any categor ...
of the sequence of injections given by the canonical inclusions \mathcal^ \hookrightarrow \mathcal^n of sheaves, gives rise to the infinite jet sheaf \mathcal^\infty(TM). Observe that by the direct limit construction it is a filtered ring.


Example

If π is the trivial bundle (''M'' × R, pr1, ''M''), then there is a canonical diffeomorphism between the first jet bundle J^1(\pi) and ''T*M'' × R. To construct this diffeomorphism, for each σ in \Gamma_M(\pi) write \bar = pr_2 \circ \sigma \in C^\infty(M)\,. Then, whenever ''p'' ∈ ''M'' :j^1_p \sigma = \left\. \, Consequently, the mapping :\begin J^1(\pi) \to T^*M \times \mathbf \\ j^1_p\sigma \mapsto \left(d\bar_p, \bar(p)\right) \end is well-defined and is clearly
injective In mathematics, an injective function (also known as injection, or one-to-one function) is a function that maps distinct elements of its domain to distinct elements; that is, implies . (Equivalently, implies in the equivalent contrapositiv ...
. Writing it out in coordinates shows that it is a diffeomorphism, because if ''(xi, u)'' are coordinates on ''M'' × R, where ''u'' = idR is the identity coordinate, then the derivative coordinates ''ui'' on ''J1(π)'' correspond to the coordinates ∂''i'' on ''T*M''. Likewise, if π is the trivial bundle (R × ''M'', pr1, R), then there exists a canonical diffeomorphism between J^1(\pi)and R × ''TM''.


Contact structure

The space ''Jr''(π) carries a natural distribution, that is, a sub-bundle of the tangent bundle ''TJr''(π)), called the ''Cartan distribution''. The Cartan distribution is spanned by all tangent planes to graphs of holonomic sections; that is, sections of the form ''jrφ'' for ''φ'' a section of π. The annihilator of the Cartan distribution is a space of differential one-forms called
contact form In mathematics, contact geometry is the study of a geometric structure on smooth manifolds given by a hyperplane distribution in the tangent bundle satisfying a condition called 'complete non-integrability'. Equivalently, such a distribution m ...
s, on ''Jr''(π). The space of differential one-forms on ''Jr''(π) is denoted by \Lambda^1J^r(\pi) and the space of contact forms is denoted by \Lambda_C^r\pi. A one form is a contact form provided its pullback along every prolongation is zero. In other words, \theta\in\Lambda^1J^r\pi is a contact form if and only if :\left(j^\sigma\right)^*\theta = 0 for all local sections σ of π over ''M''. The Cartan distribution is the main geometrical structure on jet spaces and plays an important role in the geometric theory of
partial differential equation In mathematics, a partial differential equation (PDE) is an equation which imposes relations between the various partial derivatives of a Multivariable calculus, multivariable function. The function is often thought of as an "unknown" to be sol ...
s. The Cartan distributions are completely non-integrable. In particular, they are not involutive. The dimension of the Cartan distribution grows with the order of the jet space. However, on the space of infinite jets ''J'' the Cartan distribution becomes involutive and finite-dimensional: its dimension coincides with the dimension of the base manifold ''M''.


Example

Consider the case ''(E, π, M)'', where ''E'' ≃ R2 and ''M'' ≃ R. Then, ''(J1(π), π, M)'' defines the first jet bundle, and may be coordinated by ''(x, u, u1)'', where :\begin x\left(j^1_p\sigma\right) &= x(p) = x \\ u\left(j^1_p\sigma\right) &= u(\sigma(p)) = u(\sigma(x)) = \sigma(x) \\ u_1\left(j^1_p\sigma\right) &= \left.\frac\_p = \sigma'(x) \end for all ''p'' ∈ ''M'' and σ in Γ''p''(π). A general 1-form on ''J1(π)'' takes the form :\theta = a(x, u, u_1)dx + b(x, u, u_1)du + c(x, u, u_1)du_1\, A section σ in Γ''p''(π) has first prolongation :j^1\sigma = (u, u_1) = \left(\sigma(p), \left. \frac \_p \right). Hence, ''(j1σ)*θ'' can be calculated as :\begin \left(j^1_p\sigma\right)^* \theta &= \theta \circ j^1_p\sigma \\ &= a(x, \sigma(x), \sigma'(x))dx + b(x, \sigma(x), \sigma'(x))d(\sigma(x)) + c(x, \sigma(x),\sigma'(x))d(\sigma'(x)) \\ &= a(x, \sigma(x), \sigma'(x))dx + b(x, \sigma(x), \sigma'(x))\sigma'(x)dx + c(x, \sigma(x), \sigma'(x))\sigma''(x)dx \\ &= (x, \sigma(x), \sigma'(x)) + b(x, \sigma(x), \sigma'(x))\sigma'(x) + c(x, \sigma(x), \sigma'(x))\sigma''(x) x \end This will vanish for all sections σ if and only if ''c'' = 0 and ''a'' = −''bσ′(x)''. Hence, θ = ''b(x, u, u10'' must necessarily be a multiple of the basic contact form θ0 = ''du'' − ''u1dx''. Proceeding to the second jet space ''J2(π)'' with additional coordinate ''u2'', such that :u_2(j^2_p\sigma) = \left.\frac\_p = \sigma''(x)\, a general 1-form has the construction :\theta = a(x, u, u_1,u_2)dx + b(x, u, u_1,u_2)du + c(x, u, u_1,u_2)du_1 + e(x, u, u_1,u_2)du_2\, This is a contact form if and only if :\begin \left(j^2_p\sigma\right)^* \theta &= \theta \circ j^2_p\sigma \\ &= a(x, \sigma(x), \sigma'(x), \sigma''(x))dx + b(x, \sigma(x), \sigma'(x),\sigma''(x))d(\sigma(x)) + \\ &\qquad\qquad c(x, \sigma(x), \sigma'(x),\sigma''(x))d(\sigma'(x)) + e(x, \sigma(x), \sigma'(x),\sigma''(x))d(\sigma''(x)) \\ &= adx + b\sigma'(x)dx + c\sigma''(x)dx + e\sigma(x)dx \\ &= + b\sigma'(x) + c\sigma''(x) + e\sigma(x)x\\ &= 0 \end which implies that ''e'' = 0 and ''a'' = −''bσ′(x)'' − ''cσ′′(x)''. Therefore, θ is a contact form if and only if :\theta = b(x, \sigma(x), \sigma'(x))\theta_ + c(x, \sigma(x), \sigma'(x))\theta_1, where θ1 = ''du''1 − ''u''2''dx'' is the next basic contact form (Note that here we are identifying the form θ0 with its pull-back \left(\pi_\right)^\theta_ to ''J2(π)''). In general, providing ''x, u'' ∈ R, a contact form on ''Jr+1(π)'' can be written as a linear combination of the basic contact forms :\theta_k = du_k - u_dx \qquad k = 0, \ldots, r - 1\, where : u_k\left(j^k \sigma\right) = \left.\frac\_p. Similar arguments lead to a complete characterization of all contact forms. In local coordinates, every contact one-form on ''Jr+1(π)'' can be written as a linear combination :\theta = \sum_^r P_\alpha^I \theta_I^\alpha with smooth coefficients P^\alpha_i(x^i, u^\alpha, u^\alpha_I) of the basic contact forms :\theta_I^\alpha = du^\alpha_I - u^\alpha_ dx^i\, '', I, '' is known as the order of the contact form \theta_i^\alpha. Note that contact forms on ''Jr+1(π)'' have orders at most ''r''. Contact forms provide a characterization of those local sections of ''πr+1'' which are prolongations of sections of π. Let ψ ∈ Γ''W''(''πr+1''), then ''ψ'' = ''jr+1''σ where σ ∈ Γ''W''(π) if and only if \psi^* (\theta, _) = 0, \forall \theta \in \Lambda_C^1 \pi_.\,


Vector fields

A general vector field on the total space ''E'', coordinated by (x, u) \mathrel\stackrel \left(x^i, u^\alpha\right)\,, is :V \mathrel\stackrel \rho^i(x, u)\frac + \phi^(x, u)\frac.\, A vector field is called horizontal, meaning that all the vertical coefficients vanish, if \phi^\alpha = 0. A vector field is called vertical, meaning that all the horizontal coefficients vanish, if ''ρi'' = 0. For fixed ''(x, u)'', we identify :V_ \mathrel\stackrel \rho^i(x, u) \frac + \phi^(x, u) \frac\, having coordinates ''(x, u, ρi, φα)'', with an element in the fiber ''TxuE'' of ''TE'' over ''(x, u)'' in ''E'', called a tangent vector in ''TE''. A section :\begin \psi : E \to TE \\ (x, u) \mapsto \psi(x, u) = V \end is called a vector field on ''E'' with :V = \rho^i(x, u) \frac + \phi^\alpha(x, u) \frac and ψ in ''Γ(TE)''. The jet bundle ''Jr(π)'' is coordinated by (x, u, w) \mathrel\stackrel \left(x^i, u^\alpha, w_i^\alpha\right)\,. For fixed ''(x, u, w)'', identify : V_ \mathrel\stackrel V^i(x, u, w) \frac + V^\alpha(x, u, w) \frac + V^\alpha_i(x, u, w) \frac + V^\alpha_(x, u, w) \frac + \cdots + V^\alpha_(x, u, w) \frac having coordinates :\left(x, u, w, v^\alpha_i, v^\alpha_, \cdots, v^\alpha_\right), with an element in the fiber T_(J^r\pi) of ''TJr(π)'' over ''(x, u, w)'' ∈ ''Jr(π)'', called a tangent vector in ''TJr(π)''. Here, :v^\alpha_i, v^\alpha_, \ldots, v^\alpha_ are real-valued functions on ''Jr(π)''. A section :\begin \Psi : J^r(\pi) \to TJ^r(\pi) \\ (x, u, w) \mapsto \Psi(u, w) = V \end is a vector field on ''Jr(π)'', and we say \Psi \in \Gamma(T\left(J^r\pi\right)).


Partial differential equations

Let ''(E, π, M)'' be a fiber bundle. An ''r''-th order
partial differential equation In mathematics, a partial differential equation (PDE) is an equation which imposes relations between the various partial derivatives of a Multivariable calculus, multivariable function. The function is often thought of as an "unknown" to be sol ...
on π is a
closed Closed may refer to: Mathematics * Closure (mathematics), a set, along with operations, for which applying those operations on members always results in a member of the set * Closed set, a set which contains all its limit points * Closed interval, ...
embedded submanifold ''S'' of the jet manifold ''Jr(π)''. A solution is a local section σ ∈ Γ''W''(π) satisfying j^_p\sigma \in S, for all ''p'' in ''M''. Consider an example of a first order partial differential equation.


Example

Let π be the trivial bundle (R2 × R, pr1, R2) with global coordinates (''x''1, ''x''2, ''u''1). Then the map ''F'' : ''J''1(π) → R defined by :F = u^1_1 u^1_2 - 2x^2 u^1 gives rise to the differential equation :S = \left\ which can be written :\frac\frac - 2x^2\sigma = 0. The particular :\begin \sigma : \mathbf^2 \to \mathbf^2 \times \mathbf \\ \sigma(p_1, p_2) = \left( p^1, p^2, p^1(p^2)^2 \right) \end has first prolongation given by :j^1\sigma\left(p_1, p_2\right) = \left( p^1, p^2, p^1\left(p^2\right)^2, \left(p^2\right)^2, 2p^1 p^2 \right) and is a solution of this differential equation, because :\begin \left(u^1_1 u^1_2 - 2x^2 u^1 \right)\left(j^1_p\sigma\right) &= u^1_1\left(j^1_p\sigma\right)u^1_2\left(j^1_p\sigma\right) - 2x^2\left(j^1_p\sigma\right)u^1\left(j^1_p\sigma\right) \\ &= \left(p^2\right)^2 \cdot 2p^1 p^2 - 2 \cdot p^2 \cdot p^1\left(p^2\right)^2 \\ &= 2p^1\left(p^2\right)^3 - 2p^1 \left(p^2\right)^3 \\ &= 0 \end and so j^1_p\sigma \in S for ''every'' ''p'' ∈ R2.


Jet prolongation

A local diffeomorphism ''ψ'' : ''Jr''(''π'') → ''Jr''(''π'') defines a contact transformation of order ''r'' if it preserves the contact ideal, meaning that if θ is any contact form on ''Jr''(''π''), then ''ψ*θ'' is also a contact form. The flow generated by a vector field ''Vr'' on the jet space ''Jr(π)'' forms a one-parameter group of contact transformations if and only if the Lie derivative \mathcal_(\theta) of any contact form θ preserves the contact ideal. Let us begin with the first order case. Consider a general vector field ''V''1 on ''J''1(''π''), given by :V^1\ \stackrel\ \rho^i\left(x^i, u^\alpha, u_I^\alpha\right)\frac + \phi^\left(x^i, u^\alpha, u_I^\alpha\right)\frac + \chi^_i\left(x^i, u^\alpha, u_I^\alpha\right)\frac. We now apply \mathcal_ to the basic contact forms \theta^_0 = du^ - u_i^dx^i, and expand the
exterior derivative On a differentiable manifold, the exterior derivative extends the concept of the differential of a function to differential forms of higher degree. The exterior derivative was first described in its current form by Élie Cartan in 1899. The res ...
of the functions in terms of their coordinates to obtain: :\begin \mathcal_\left(\theta^_0\right) &= \mathcal_\left(du^ - u_i^dx^i\right) \\ &= \mathcal_du^ - \left(\mathcal_u_i^\right)dx^i - u_i^\left(\mathcal_dx^i\right) \\ &= d\left(V^1u^\right) - V^1u_i^dx^i - u_i^d\left(V^1 x^i\right) \\ &= d\phi^ - \chi^_idx^i - u_i^d\rho^i \\ &= \frac dx^i + \frac du^k + \frac du^k_i - \chi^_i dx^i - u_i^\left \frac dx^m + \frac du^k + \frac du^k_m \right\\ &= \frac dx^i + \frac \left(\theta^k + u_i^k dx^i\right) + \frac du^k_i - \chi^_i dx^i - u_l^ \left \frac dx^i + \frac \left(\theta^k + u_i^k dx^i\right) + \frac du^k_i \right \\ &= \left \frac + \fracu_i^k - u_l^\alpha \left(\frac + \fracu_i^k\right) - \chi^_i \rightdx^i + \left \frac - u_l^\frac\rightdu^k_i + \left( \frac - u_l^\frac \right)\theta^k \end Therefore, ''V1'' determines a contact transformation if and only if the coefficients of ''dxi'' and du^k_i in the formula vanish. The latter requirements imply the contact conditions :\frac - u^_l \frac = 0 The former requirements provide explicit formulae for the coefficients of the first derivative terms in ''V1'': :\chi^_i = \widehat_i \phi^ - u^_l\left(\widehat_i\rho^l\right) where :\widehat_i = \frac + u^k_i\frac denotes the zeroth order truncation of the total derivative ''Di''. Thus, the contact conditions uniquely prescribe the prolongation of any point or contact vector field. That is, if \mathcal_ satisfies these equations, ''Vr'' is called the ''r''-th prolongation of ''V'' to a vector field on ''Jr(π)''. These results are best understood when applied to a particular example. Hence, let us examine the following.


Example

Consider the case ''(E, π, M)'', where ''E'' ≅ R2 and ''M'' ≃ R. Then, ''(J1(π), π, E)'' defines the first jet bundle, and may be coordinated by ''(x, u, u1)'', where :\begin x(j^1_\sigma) &= x(p) = x \\ u(j^1_\sigma) &= u(\sigma(p)) = u(\sigma(x)) = \sigma(x) \\ u_1(j^1_\sigma) &= \left.\frac\_ = \dot(x) \end for all ''p'' ∈ ''M'' and ''σ'' in Γ''p''(''π''). A contact form on ''J1(π)'' has the form :\theta = du - u_1 dx Consider a vector ''V'' on ''E'', having the form :V = x \frac - u \frac Then, the first prolongation of this vector field to ''J1(π)'' is :\begin V^1 &= V + Z \\ &= x \frac - u \frac + Z \\ &= x \frac - u \frac + \rho(x, u, u_1) \frac \end If we now take the Lie derivative of the contact form with respect to this prolonged vector field, \mathcal_(\theta), we obtain :\begin \mathcal_(\theta) &= \mathcal_(du - u_1dx) \\ &= \mathcal_du - \left(\mathcal_u_1\right)dx - u_1\left(\mathcal_dx\right) \\ &= d\left(V^1u\right) - V^1 u_1 dx - u_1 d\left(V^1x\right) \\ &= dx - \rho(x, u, u_1)dx + u_1 du \\ &= (1 - \rho(x, u, u_1))dx + u_1 du \\ &= - \rho(x, u, u_1)x + u_1(\theta + u_1 dx) && du = \theta + u_1 dx \\ &= + u_1u_1 - \rho(x, u, u_1)x + u_1\theta \end Hence, for preservation of the contact ideal, we require :1 + u_1 u_1 - \rho(x, u, u_1) = 0 \quad \Leftrightarrow \quad \rho(x, u, u_1) = 1 + u_1 u_1. And so the first prolongation of ''V'' to a vector field on ''J1(π)'' is :V^1 = x \frac - u \frac + (1 + u_1u_1)\frac. Let us also calculate the second prolongation of ''V'' to a vector field on ''J2(π)''. We have \ as coordinates on ''J2(π)''. Hence, the prolonged vector has the form : V^2 = x \frac - u \frac + \rho(x, u, u_1, u_2)\frac + \phi(x, u, u_1, u_2)\frac. The contact forms are :\begin \theta &= du - u_1dx \\ \theta_1 &= du_1 - u_2dx \end To preserve the contact ideal, we require :\begin \mathcal_(\theta) &= 0 \\ \mathcal_(\theta_1) &= 0 \end Now, ''θ'' has no ''u''2 dependency. Hence, from this equation we will pick up the formula for ''ρ'', which will necessarily be the same result as we found for ''V1''. Therefore, the problem is analogous to prolonging the vector field ''V1'' to ''J''2(π). That is to say, we may generate the ''r''-th prolongation of a vector field by recursively applying the Lie derivative of the contact forms with respect to the prolonged vector fields, ''r'' times. So, we have :\rho(x, u, u_1) = 1 + u_1 u_1 and so :\begin V^2 &= V^1 + \phi(x, u, u_1, u_2)\frac \\ &= x \frac - u \frac + (1 + u_1 u_1)\frac + \phi(x, u, u_1, u_2)\frac \end Therefore, the Lie derivative of the second contact form with respect to ''V2'' is :\begin \mathcal_(\theta_1) &= \mathcal_(du_1 - u_2dx) \\ &= \mathcal_du_1 - \left(\mathcal_u_2\right)dx - u_2\left(\mathcal_dx\right) \\ &= d(V^2 u_1) - V^2u_2dx - u_2d(V^2x) \\ &= d(1 + u_1 u_1) - \phi(x, u, u_1, u_2)dx + u_2du \\ &= 2u_1du_1 - \phi(x, u, u_1, u_2)dx + u_2du \\ &= 2u_1du_1 - \phi(x, u, u_1, u_2)dx + u_2 (\theta + u_1dx) & du &= \theta + u_1 dx \\ &= 2u_1(\theta_1 + u_2dx) - \phi(x, u, u_1, u_2)dx + u_2(\theta + u_1dx) & du_1 &= \theta_1 + u_2 dx \\ &= u_1u_2 - \phi(x, u, u_1, u_2)x + u_2\theta + 2u_1\theta_1 \end Hence, for \mathcal_(\theta_1) to preserve the contact ideal, we require :3u_1 u_2 - \phi(x, u, u_1, u_2) = 0 \quad \Leftrightarrow \quad \phi(x, u, u_1, u_2) = 3u_1 u_2. And so the second prolongation of ''V'' to a vector field on ''J''2(π) is : V^2 = x \frac - u \frac + (1 + u_1 u_1)\frac + 3u_1 u_2\frac. Note that the first prolongation of ''V'' can be recovered by omitting the second derivative terms in ''V2'', or by projecting back to ''J1(π)''.


Infinite jet spaces

The inverse limit of the sequence of projections \pi_:J^(\pi)\to J^k(\pi) gives rise to the infinite jet space ''J(π)''. A point j_p^\infty(\sigma) is the equivalence class of sections of π that have the same ''k''-jet in ''p'' as σ for all values of ''k''. The natural projection π maps j_p^\infty(\sigma) into ''p''. Just by thinking in terms of coordinates, ''J(π)'' appears to be an infinite-dimensional geometric object. In fact, the simplest way of introducing a differentiable structure on ''J(π)'', not relying on differentiable charts, is given by the differential calculus over commutative algebras. Dual to the sequence of projections \pi_: J^(\pi) \to J^k(\pi) of manifolds is the sequence of injections \pi_^*: C^\infty(J^(\pi)) \to C^\infty\left(J^(\pi)\right) of commutative algebras. Let's denote C^\infty(J^(\pi)) simply by \mathcal_k(\pi). Take now the
direct limit In mathematics, a direct limit is a way to construct a (typically large) object from many (typically smaller) objects that are put together in a specific way. These objects may be groups, rings, vector spaces or in general objects from any categor ...
\mathcal(\pi) of the \mathcal_k(\pi)'s. It will be a commutative algebra, which can be assumed to be the smooth functions algebra over the geometric object ''J(π)''. Observe that \mathcal(\pi), being born as a direct limit, carries an additional structure: it is a filtered commutative algebra. Roughly speaking, a concrete element \varphi\in\mathcal(\pi) will always belong to some \mathcal_k(\pi), so it is a smooth function on the finite-dimensional manifold ''Jk''(π) in the usual sense.


Infinitely prolonged PDEs

Given a ''k''-th order system of PDEs ''E'' ⊆ ''Jk(π)'', the collection ''I(E)'' of vanishing on ''E'' smooth functions on ''J(π)'' is an ideal in the algebra \mathcal_k(\pi), and hence in the direct limit \mathcal(\pi) too. Enhance ''I(E)'' by adding all the possible compositions of total derivatives applied to all its elements. This way we get a new ideal ''I'' of \mathcal(\pi) which is now closed under the operation of taking total derivative. The submanifold ''E''(∞) of ''J''(π) cut out by ''I'' is called the infinite prolongation of ''E''. Geometrically, ''E''(∞) is the manifold of formal solutions of ''E''. A point j_p^\infty(\sigma) of ''E''(∞) can be easily seen to be represented by a section σ whose ''k''-jet's graph is tangent to ''E'' at the point j_p^k(\sigma) with arbitrarily high order of tangency. Analytically, if ''E'' is given by φ = 0, a formal solution can be understood as the set of Taylor coefficients of a section σ in a point ''p'' that make vanish the Taylor series of \varphi\circ j^k(\sigma) at the point ''p''. Most importantly, the closure properties of ''I'' imply that ''E''(∞) is tangent to the infinite-order contact structure \mathcal on ''J(π)'', so that by restricting \mathcal to ''E''(∞) one gets the diffiety (E_, \mathcal, _), and can study the associated Vinogradov (C-spectral) sequence.


Remark

This article has defined jets of local sections of a bundle, but it is possible to define jets of functions ''f: M'' → ''N'', where ''M'' and ''N'' are manifolds; the jet of ''f'' then just corresponds to the jet of the section :''grf: M'' → ''M'' × ''N'' :''grf(p)'' = ''(p, f(p))'' (''grf'' is known as the graph of the function ''f'') of the trivial bundle (''M'' × ''N'', π1, ''M''). However, this restriction does not simplify the theory, as the global triviality of π does not imply the global triviality of π1.


See also

* Jet group * Jet (mathematics) *
Lagrangian system In mathematics, a Lagrangian system is a pair , consisting of a smooth fiber bundle and a Lagrangian density , which yields the Euler–Lagrange differential operator acting on sections of . In classical mechanics, many dynamical systems are Lagr ...
* Variational bicomplex


References


Further reading

* Ehresmann, C., "Introduction à la théorie des structures infinitésimales et des pseudo-groupes de Lie." ''Geometrie Differentielle,'' Colloq. Inter. du Centre Nat. de la Recherche Scientifique, Strasbourg, 1953, 97-127. * Kolář, I., Michor, P., Slovák, J.,
Natural operations in differential geometry.
' Springer-Verlag: Berlin Heidelberg, 1993. , . * Saunders, D. J., "The Geometry of Jet Bundles", Cambridge University Press, 1989, * Krasil'shchik, I. S., Vinogradov, A. M., t al. "Symmetries and conservation laws for differential equations of mathematical physics", Amer. Math. Soc., Providence, RI, 1999, . * Olver, P. J., "Equivalence, Invariants and Symmetry", Cambridge University Press, 1995, {{Authority control Differential topology Differential equations Fiber bundles