Inconel 625
   HOME

TheInfoList



OR:

Inconel Inconel is a nickel-chromium-based superalloy often utilized in extreme environments where components are subjected to high temperature, pressure or Mechanical load, mechanical loads. Inconel alloys are oxidation- and corrosion-resistant. When he ...
Alloy 625 (UNS designation N06625) is a nickel-based
superalloy A superalloy, or high-performance alloy, is an alloy with the ability to operate at a high fraction of its melting point. Key characteristics of a superalloy include mechanical strength, thermal creep deformation resistance, surface stability, ...
that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications. Inconel 625 was developed in the 1960s with the purpose of creating a material that could be used for steam-line piping. Some modifications were made to its original composition that have enabled it to be even more creep-resistant and weldable. Because of this, the uses of Inconel 625 have expanded into a wide range of industries such as the chemical processing industry, and for marine and nuclear applications to make pumps and valves and other high pressure equipment. Because of the metal's high Niobium (Nb) levels as well as its exposure to harsh environments and high temperatures, there was concern about the weldability of Inconel 625. Studies were therefore conducted to test the metal's weldability, tensile strength and creep resistance, and Inconel 625 was found to be an ideal choice for welding. Other well known names for Inconel 625 are Haynes 625, Nickelvac 625, Nicrofer 6020, Altemp 625 and Chronic 625.


Chemistry

Inconel 625 was designed as a solid solution strengthened material with no significant microstructure. This holds true at low and high temperatures, but there is a region (923 to 1148 K) where precipitates form that are detrimental to the creep properties, and thus the strength, of the alloy. Under any creep conditions (high temperature with an applied stress), M23C6-type carbides form at the grain boundaries. When tested at 973 K, γ” precipitates begin forming. These γ” phase precipitates are ordered A3 B type with a composition of Ni3(Nb, Al, Ti) and a tetragonal crystal structure. They form a disk-shaped morphology and are coherent with respect to the matrix. When tested at 998 K, a δ-phase precipitate begins forming which consist of Ni3(Nb, Mo) in an orthorhombic crystal structure. They form in a needle-like morphology and are incoherent with the matrix. Both of these precipitates can be completely dissolved back into the matrix when the sample is heated to 1148 K for 5 hours. This leads to the ability to recover creep properties of the alloy to prolong the materials lifetime.


ASTM Specifications

ASTM (American Society for Testing and Materials) for various products made out of Inconel 625 are as follows:


Markets

Markets for Inconel 625 include: * Offshore * Marine * Nuclear * Chemical Processing * Aerospace *Glow Plugs


Applications

Product and technology applications of Inconel 625 include: * Seawater components * Flare stacks * Aircraft ducting systems * Specialized seawater equipment * Chemical process equipment * Turbine shroud rings * Engine thrust-reverser systems * Jet engine exhausts systems * Boiler furnaces


Specifications

Specifications and certifications include: * AMS: 5599, 5666, 5837, 5869 * MS: 5837 * ASME: SB 443 Gr 1, SB 446 Gr 1 * ASTM: B 443 Gr 1, B 446 Gr 1 * EN: 2.4856 * ISO: 15156-3 * NACE: MR0175-3 * UNS: N06625 * Werkstoff: 2.4856


See also

*
Inconel Inconel is a nickel-chromium-based superalloy often utilized in extreme environments where components are subjected to high temperature, pressure or Mechanical load, mechanical loads. Inconel alloys are oxidation- and corrosion-resistant. When he ...
*
Incoloy Incoloy refers to a range of superalloys now produced by the Special Metals Corporation (SMC) group of companies and created with a trademark by the Inco company in 1952. Originally Inco protected these alloys by patent. In 2000, the SMC publishe ...
*
Monel Monel is a group of alloys of nickel (from 52 to 68%) and copper, with small amounts of iron, manganese, carbon, and silicon. Monel is not a cupronickel alloy because it has less than 60% copper. Stronger than pure nickel, Monel alloys are res ...
* Hastelloy * Nimonic


References

{{Reflist, 330em Superalloys