iO4

Periodate ( ) is an anion composed of iodine and oxygen. It is one of a number of oxyanions of iodine and is the highest in the series, with iodine existing in oxidation state +7. Unlike other perhalogenates, such as perchlorate, it can exist in two forms: metaperiodate and orthoperiodate . In this regard it is comparable to the tellurate ion from the adjacent group. It can combine with a number of counter ions to form periodates, which may also be regarded as the salts of periodic acid.

Periodates were discovered by Heinrich Gustav Magnus and C. F. Ammermüller; who first synthesised periodic acid in 1833.

Synthesis

Classically, periodate was most commonly produced in the form of sodium hydrogen periodate (). This is commercially available, but can also be produced by the oxidation of iodates with chlorine and sodium hydroxide. Or, similarly, from iodides by oxidation with bromine and sodium hydroxide:

:\overset + Cl2 + 4 NaOH -> Na3H2IO6 + 2NaCl + H2O
:NaI + 4 Br2 + 10 NaOH -> Na3H2IO6 + 8 NaBr + 4 H2O

Modern industrial scale production involves the electrochemical oxidation of iodates, on a lead dioxide () anode, with the following standard electrode potential:

:H5IO6 + H+ + 2e- -> IO3- + 3 H2O

Metaperiodates are typically prepared by the dehydration of sodium hydrogen periodate with nitric acid, or by dehydrating orthoperiodic acid by heating it to 100 Â°C under vacuum.

:Na3H2IO6 + 2 HNO3 -> NaIO4 + 2 NaNO3 + 2 H2O
:H5IO6 -> HIO4 + 2 H2O

They can also be generated directly from iodates by treatment with other strong oxidizing agents such as hypochlorites:
:NaIO3 + \overset -> NaIO4 + NaCl

Forms and interconversion

Periodate can exist in a variety of forms in aqueous media, with pH being a controlling factor. Orthoperiodate has a number of acid dissociation constants.

:H5IO6 <=> H4IO6- + H+
:H4IO6- <=> H3IO6^2- + H+
:H3IO6^2- <=> H2IO6^3- + H+

The ortho- and metaperiodate forms also exist in equilibrium.

:H4IO6- <=> IO4- + 2 H2O

For this reason orthoperiodate is sometimes referred to as the dihydrate of metaperiodate, written ; however, this description is not strictly accurate as X-ray crystallography of shows 5 equivalent groups.

At extremes of pH additional species can form. Under basic conditions a dehydration reaction can take place to form the diperiodate (sometimes referred to as mesoperiodate).

:2H3IO6^2- <=> H2I2O10^4- + 2 H2O

Under strongly acid conditions periodic acid can be protonated to give the '' orthoperiodonium'' cation.

:H6IO6+ <=> H5IO6 + H+

Structure and bonding

In both the ortho- and metaperiodate the iodine is hypervalent, as it forms more bonds than would classically be allowed. This has been explained in terms of dative bonds, confirming the absence of double bonding in these molecules.

Exact structures vary depending on counter ions, however on average orthoperiodates adopt a slightly deformed octahedral geometry with X-ray diffraction showing I–O bond lengths of 1.89  Ã…. Metaperiodates adopt a distorted tetrahedral geometry with an average I–O distance of 1.78 Ã….

Reactions

Cleavage reactions

Periodates can cleave carbon–carbon bonds on a variety of 1,2-difunctionalised alkanes. The most common example of this is diol cleavage, which was also the first to be discovered ( Malaprade reaction).
In addition to diols, periodates can cleave 1,2-hydroxy ketones, 1,2-diketones, α-keto acids, α-hydroxy acids, amino acids, 1,2-amino alcohols, and 1,2-diamines, to give aldehydes, ketones, and carboxylic acids.
In the presence of strong acid catalyst, like H₂SO₄ or HNO₃ epoxides are also converted into aldehyde or ketones or dicarbonyl compounds.

Alkenes can also be oxidised and cleaved in the Lemieux–Johnson oxidation. This uses a catalytic loading of osmium tetroxide which is regenerated in situ by the periodate. The overall process is equivalent to that of ozonolysis.

Cleavage reactions proceed via a cyclic intermediate called a periodate ester. The formation of this may be affected by pH and temperature but is most strongly affected by the geometry of the substrate, with '' cis''-diols reacting significantly faster than ''trans''-diols. The reactions are exothermic and are typically performed at 0 Â°C. As periodate salts are only readily soluble in water reactions are generally performed in aqueous media. Where solubility is an issue periodic acid may be used, as this is soluble in alcohols; phase transfer catalysts are also effective in biphasic reaction mixtures. In extreme cases the periodate may be exchanged for lead tetraacetate which reacts in a similar manner and is soluble in organic solvents ( Criegee oxidation).

Periodate cleavage is often utilized in molecular biochemistry for the purposes of modifying saccharide rings, as many five- and six-membered sugars have vicinal diols. Historically it was also used to determine the structure of monosaccharides.

Periodate cleavage may be performed on an industrial scale to form dialdehyde starch which has uses in paper production.

Oxidation reactions

Periodates are powerful oxidising agents. They can oxidise catechol to 1,2-benzoquinone and hydroquinone to 1,4-benzoquinone. Sulfides can be effectively oxidised to sulfoxides. Periodates are sufficiently powerful to generate other strong inorganic oxidisers such as permanganate, osmium tetroxide
and ruthenium tetroxide.

Niche uses

Periodates are highly selective etchants for certain ruthenium-based oxides.

Several staining agents use in microscopy are based around periodate (e.g. periodic acid–Schiff stain and Jones' stain).

Periodates have also been used as oxidising agents for use in pyrotechnics. In 2013 the US Army announced that it would replace the environmentally harmful chemicals barium nitrate and potassium perchlorate with sodium metaperiodate for use in their tracer ammunition.

Other oxyanions

Periodate is part of a series of oxyanions in which iodine can assume oxidation states of −1, +1, +3, +5, or +7. A number of neutral iodine oxides are also known.

See also

* Sodium periodate
* Potassium periodate
* Periodic acid

References

{{Periodates