Farr 38
   HOME

TheInfoList



OR:

The Farr 38, also called the Farr 11.6m, is a
sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...
that was designed by
New Zealand New Zealand () is an island country in the southwestern Pacific Ocean. It consists of two main landmasses—the North Island () and the South Island ()—and List of islands of New Zealand, over 600 smaller islands. It is the List of isla ...
er
Bruce Farr Bruce Kenneth Farr (born 1949 in Auckland) is a New Zealand designer of racing and cruising yachts. Farrdesigned boats have won, challenged for, or placed highly in the Whitbread Round the World Race, America's Cup, and Sydney to Hobart Yacht R ...
as a racer-
cruiser A cruiser is a type of warship. Modern cruisers are generally the largest ships in a fleet after aircraft carriers and amphibious assault ships, and can usually perform several operational roles from search-and-destroy to ocean escort to sea ...
and first built in 1978. It is
Farr Yacht Design Farr Yacht Design, founded by Bruce Farr in Auckland, New Zealand, is a Regatta, racing Yacht designer, yacht design firm based in Annapolis, Maryland, United States. The firm is led by Patrick Shaughnessy. Its yachts measure from to . Farr de ...
number 72.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 324-325. Houghton Mifflin Company, 1994. The Farr 38 is sometimes confused with an earlier Farr 38 design. This unrelated design was produced as a single boat, the ''Jenny H'', constructed in 1977.


Production

The design was built on a production basis in
Australia Australia, officially the Commonwealth of Australia, is a country comprising mainland Australia, the mainland of the Australia (continent), Australian continent, the island of Tasmania and list of islands of Australia, numerous smaller isl ...
,
Brazil Brazil, officially the Federative Republic of Brazil, is the largest country in South America. It is the world's List of countries and dependencies by area, fifth-largest country by area and the List of countries and dependencies by population ...
,
Canada Canada is a country in North America. Its Provinces and territories of Canada, ten provinces and three territories extend from the Atlantic Ocean to the Pacific Ocean and northward into the Arctic Ocean, making it the world's List of coun ...
, New Zealand and
South Africa South Africa, officially the Republic of South Africa (RSA), is the Southern Africa, southernmost country in Africa. Its Provinces of South Africa, nine provinces are bounded to the south by of coastline that stretches along the Atlantic O ...
. It was built by Compass Yachts in New Zealand, Spindrift Yacht Inc in Canada and by Marina Bracuhy in Brazil. A number of boats were built by amateur boatbuilders from purchased plans as well. Collectively they completed 85 examples, with production commencing in 1978, but it is now out of production.


Design

The Farr 38 is a recreational
keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...
, built predominantly of cold-moulded
wood Wood is a structural tissue/material found as xylem in the stems and roots of trees and other woody plants. It is an organic materiala natural composite of cellulosic fibers that are strong in tension and embedded in a matrix of lignin t ...
, finished with
epoxy Epoxy is the family of basic components or Curing (chemistry), cured end products of epoxy Resin, resins. Epoxy resins, also known as polyepoxides, are a class of reactive prepolymers and polymers which contain epoxide groups. The epoxide fun ...
and
polyurethane Polyurethane (; often abbreviated PUR and PU) is a class of polymers composed of organic chemistry, organic units joined by carbamate (urethane) links. In contrast to other common polymers such as polyethylene and polystyrene, polyurethane term ...
and
fibreglass Fiberglass (American English) or fibreglass ( Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass c ...
, with the New Zealand production-built boats built out of Fibreglass. It has a fractional sloop rig with polyurethane-painted
aluminum Aluminium (or aluminum in North American English) is a chemical element; it has chemical symbol, symbol Al and atomic number 13. It has a density lower than that of other common metals, about one-third that of steel. Aluminium has ...
spars, a
raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...
, a
reverse transom In some boats and ships, a transom is the aft transverse surface of the hull that forms the stern of a vessel. Historically, they are a development from the canoe stern (or "double-ender") wherein which both bow and stern are pointed. Transom ...
, an internally mounted spade-type
rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...
controlled by a
tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post, rudder post or stock to provide leverage in the form of torque for the helmsman to turn ...
or optional
wheel A wheel is a rotating component (typically circular in shape) that is intended to turn on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machin ...
and a fixed fin
keel The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...
. It displaces and carries of ballast. The boat has a draft of with the standard keel fitted. The boat is fitted with a Pathfinder
diesel engine The diesel engine, named after the German engineer Rudolf Diesel, is an internal combustion engine in which Combustion, ignition of diesel fuel is caused by the elevated temperature of the air in the cylinder due to Mechanics, mechanical Compr ...
of for docking and manoeuvring. The fuel tank holds and the fresh water tank has a capacity of . The design has sleeping accommodation for eight people. There is a bow cabin, with a "V"-berth, two settee berths in the main cabin and two quarter berths aft, one of which is a double berth. The
galley A galley is a type of ship optimised for propulsion by oars. Galleys were historically used for naval warfare, warfare, Maritime transport, trade, and piracy mostly in the seas surrounding Europe. It developed in the Mediterranean world during ...
is located on the starboard side at the foot of the
companionway In the architecture of a ship, a companion or companionway is a raised and windowed hatchway in the ship's deck, with a ladder leading below and the hooded entrance-hatch to the main cabins. A companionway may be secured by doors or, commonly i ...
steps and features a two-burner
liquefied petroleum gas Liquefied petroleum gas, also referred to as liquid petroleum gas (LPG or LP gas), is a fuel gas which contains a flammable mixture of hydrocarbon gases, specifically propane, Butane, ''n''-butane and isobutane. It can also contain some ...
stove and an oven. Pressurized water and a refrigerator were factory options. The navigation station is to port, opposite the galley. The
head A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple ani ...
is located just aft of the bow cabin, on the port side and includes a shower. Sail controls include four
halyard In sailing, a halyard or halliard is a line (rope) that is used to hoist a ladder, sail, flag or yard. The term "halyard" derives from the Middle English ''halier'' ("rope to haul with"), with the last syllable altered by association with the E ...
winches, two secondary and two primary
jib A jib is a triangular sail that sets ahead of the foremast of a sailing vessel. Its forward corner (tack) is fixed to the bowsprit, to the bows, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main ty ...
winches and a one general purpose winch. The halyards and
outhaul An outhaul is a control line found on a sailboat. It is an element of the running rigging, used to attach the mainsail clew to the boom and tensions the foot of the sail. It commonly uses a block at the boom end and a cleat on the boom, closer ...
are mounted internally, as is the jiffy reefing system. There is a 4:1
mechanical advantage Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. The device trades off input forces against movement to obtain a desired amplification in the output force. The model for ...
boom vang A boom vang (US) or kicking strap (UK) (often shortened to "vang" or "kicker") is a line or piston system on a sailboat used to exert downward force on the boom and thus control the shape of the sail. The Collins English Dictionary defines it a ...
, as well as an adjustable
backstay A backstay is a piece of standing rigging on a sailing vessel that runs from the mast to either its transom or rear quarter, counteracting the forestay and jib. It is an important sail trim control and has a direct effect on the shape of the ma ...
. The
mainsheet traveller In sailing, a sheet is a line (rope, cable or chain) used to control the movable corner(s) (clews) of a sail. Terminology In nautical usage the term "sheet" is applied to a line or chain attached to the lower corners of a sail for the purpose ...
is mounted on the bridge deck and
genoa Genoa ( ; ; ) is a city in and the capital of the Italian region of Liguria, and the sixth-largest city in Italy. As of 2025, 563,947 people live within the city's administrative limits. While its metropolitan city has 818,651 inhabitan ...
tracks and lead blocks are provided. The boat can be fitted with a
spinnaker A spinnaker is a sail designed specifically for sailing off the wind on courses between a Point of sail#Reaching, reach (wind at 90° to the course) to Point of sail#Running downwind, downwind (course in the same direction as the wind). Spinna ...
for downwind sailing.
Anodized Anodizing is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts. The process is called ''anodizing'' because the part to be treated forms the anode electrode of an electro ...
spars and a wooden deck made from cedar were also factory options. The design has a
PHRF Performance Handicap Racing Fleet (PHRF) is a handicapping system used for yacht racing in North America. It allows dissimilar classes of sailboats to be raced against each other. The aim is to cancel out the inherent advantages and disadvantages ...
racing average handicap of 83.


Operational history

In a 1994 review Richard Sherwood wrote, "cold-molded wood, unusual in a boat of this size, is used for construction. The hull framing is cedar and the skins, spruce. Planking is thin strips adhesive-bonded in diagonal and longitudinal laminations. The result is a high-performance cruiser that has been successfully raced."


See also

*
List of sailing boat types The following is a partial list of sailboat types and sailing classes, including keelboats, dinghy, dinghies, and multihull (catamarans and trimarans). Olympic classes World Sailing Classes Historically known as the IYRU (International Yacht ...
Similar sailboats * Alajuela 38 * C&C 38 *
Columbia 38 The Columbia 38 is an American sailboat that was designed by Charley Morgan, Charles Morgan as racer-cruiser and first built in 1965. The Columbia 38 is a development of the Columbia 40. Production The design was built by Columbia Yachts in t ...
* Eagle 38 * Hunter 380 * Hunter 386 * Landfall 38 * Sabre 38 * Shannon 38 * Yankee 38


References

{{Reflist Keelboats 1970s sailboat type designs Sailing yachts Sailing yachts built in New Zealand Sailing yachts of Australia Sailboat type designs by Bruce Farr Sailboat types built by Spindrift Yacht Inc Sailboat types built by Marina Bracuhy