Here is a list of American

Electronic Industries Alliance The Electronic Industries Alliance (EIA; until 1997 Electronic Industries Association) was an American standards and trade organization composed as an alliance of trade associations for electronics manufacturers in the United States. They deve ...

(EIA) Standards. The EIA ceased operations on February 11, 2011, but the former sectors continue to serve the constituencies of EIA. EIA designated ECA to continue to develop standards for interconnect, passive and electro-mechanical (IP&E) electronic components under the ANSI-designation of EIA standards. All other electronic components standards are managed by their respective sectors. ECA is expected to merge with the National Electronic Distributors Association (NEDA) to form the Electronic Components Industry Association (ECIA). However, the EIA standards brand will continue for IP&E standards within ECIA. As currently authorized, any ANSI standard designated at ANSI EIA-xxx is developed and/or managed by ECA (and, in the future, ECIA).

1–199

* TIA/EIA-41 Cellular Radiocommunications Intersystem Operations. * EIA/TIA/IS-55 Recommended Minimum Performance Standards of 800 MHz Dual Mode Mobile Stations * EIA/TIA/IS-66 Sectional Specification for Nonpressurized Fiber Optic Splice Closures * EIA-96 * TIA/EIA-136-310-A-1 TDMA Third Generation Wireless - Radio Link Protocol –1 * JEP-143C Solid-State Reliability Assessment and Qualification Methodologies * EIA-170/RS-170 Electrical Performance Standards-Monochrome Television Studio Facilities 01 November 1957. Note: EIA-170 only appears on the cover page of the document, internal pages are labeled RS-170 in the upper right corner. EIA-170/RS-170 applies only to monochrome (black & white) video. The later color video version is RS-170A which shows color burst and the 4 color field sequence of NTSC. The RS-170A version is only a tentative standard, and was never formally adopted. NAB Engineering Handbook Seventh Edition. * EIA-189A Formerly RS-189A. Encoded color bar signal (preceded SMPTE color bars). * EIA-198 ** EIA RS-198-A? ** EIA RS-198-B:1971 ** EIA-198-C:1983 ** EIA-198-D:1991 Ceramic dielectric capacitors classes I, II, III ** EIA-198-1-E:1998 ** EIA-198-2-E:1998 ** EIA-198-3-E:1998 ** EIA-198-1-F:2002 ** EIA-198-2-F:2002 ** EIA-198-3-F:2002 ** EIA-198-3-4-F:2009

200–299

* EIA-222 Standards for antenna mast structural integrity *

RS-225 EIA RF Connectors are used to connect two items of high power radio frequency rigid or semi-rigid (flexline) coaxial transmission line. Typically these are only required in very high power transmitting installations (above 3kW at VHF to MW) wher ...

, 50Ω RF high power RF connectors, (EIA RF Connectors) *

RS-232 In telecommunications, RS-232 or Recommended Standard 232 is a standard originally introduced in 1960 for serial communication transmission of data. It formally defines signals connecting between a ''DTE'' ('' data terminal equipment'') suc ...

(or EIA-232) electrical characteristics, single-ended voltage digital interface circuit (serial data communications) * RS-259, 75Ω RF high power RF connectors, (EIA RF Connectors) * EIA-274 is the most common NC code format. In the machine tool industry it also known as G-code. In the

PCB PCB may refer to: Science and technology * Polychlorinated biphenyl, an organic chlorine compound, now recognized as an environmental toxin and classified as a persistent organic pollutant * Printed circuit board, a board used in electronics * ...

industry Standard Gerber, now revoked, was based on it. * RS-279 electronic color code originally known as the RETMA color code

300–399

* EIA/ECA-310 Cabinets, Racks, Panels, and Associated Equipment, maintained by the ECIA (includes

19-inch rack A 19-inch rack is a standardized frame or enclosure for mounting multiple electronic equipment modules. Each module has a front panel that is wide. The 19 inch dimension includes the edges or "ears" that protrude from each side of the equ ...

s, rack units) * EIA/TIA-329-B Minimum Standards for Communication Antennas Part I - Base Station Antennas * EIA/TIA-329-B-1 Minimum Standards for Communication Antennas Part II - Vehicular Antennas * EIA-343 Formerly RS-343. Signal standard for non-broadcast high resolution monochrome video. * EIA-343A Formerly RS-343 A. Video signal standard for high resolution monochrome

CCTV Closed-circuit television (CCTV), also known as video surveillance, is the use of video cameras to transmit a signal to a specific place, on a limited set of monitors. It differs from broadcast television in that the signal is not openly tr ...

. Based on EIA-343. * EIA-364-38 TP-38D Cable Pull-Out Test Procedure for Electrical Connectors * EIA-370-B Designation System for Semiconductor Devices.

400–499

RS-422 RS-422, also known as TIA/EIA-422, is a technical standard originated by the Electronic Industries Alliance that specifies electrical characteristics of a digital signaling circuit. It was meant to be the foundation of a suite of standards tha ...

(or EIA-422 or TIA-422), electrical characteristics of the balanced voltage digital interface circuit (serial data communications) *

RS-423 RS-423, also known as TIA/EIA-423, is a technical standard originated by the Electronic Industries Alliance that specifies electrical characteristics of a digital signaling circuit. Although it was originally intended as a successor to RS-232C ...

, a standard for serial communications * RS-449 for serial data communications * EIA/TIA-455-A Standard Test Procedure for Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic Components * EIA/TIA-455-12A FOTP-12 Fluid Immersion Test for Fiber Optic Components * EIA/TIA-455-37A FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable * EIA/TIA-455-48B FOTP-48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instruments * EIA/TIA-455-87B FOTP-87 Fiber Optic Cable Knot Test * EIA/TIA-455-188 FOTP-188 Low Temperature Testing of Fiber Optic Components * EIA-RS-481 Taping/Leadless Components for Automatic Placement *

RS-485 RS-485, also known as TIA-485(-A) or EIA-485, is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems. Electrical signaling is balanced, and multipoint systems are supported. The s ...

Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems (serial data communications) * RS-494 A 1983

Binary Cutter Location A cutter location (CLData) refers to the position which a CNC milling machine has been instructed to hold a milling cutter by the instructions in the program (typically G-code). Each line of motion controlling G-code consists of two parts: the ...

(BCL) standard for CNC

500–599

* EIA-535 Fixed Tantalum Capacitors * TIA-568 cable wiring standard for structured cabling (Commercial Building Telecommunications Cabling Standard) * EIA/TIA-569 Commercial Building Standard for Telecommunications Pathways and Spaces * EIA/TIA-570 Residential and Light Commercial Telecommunications Wiring Standard * TIA-574 standardizes the 9-pin D-subminiature connector pinout for use with EIA-232 electrical signalling

600–699

* EIA-608 standard for closed captioning for NTSC TV broadcasts in the United States and Canada * TIA/EIA-634-B MC-BS Interface for Public Wireless Communications Systems * EIA/TIA-662 standard for Personal Wireless Telecommunications (PWT). * TIA/EIA-667 Personal Access Communications System Wireless User Premises Equipment (PACS-WUPE) Air Interface Standard

700–799

* TIA/EIA/IS-707-A Data Service Options for Wideband Spread Spectrum Systems * EIA-708 is the standard for closed captioning for

ATSC Advanced Television Systems Committee (ATSC) standards are an American set of standards for digital television transmission over terrestrial, cable and satellite networks. It is largely a replacement for the analog NTSC standard and, like that ...

digital television Digital television (DTV) is the transmission of television signals using digital encoding, in contrast to the earlier analog television technology which used analog signals. At the time of its development it was considered an innovative advanc ...

streams in the

United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 U.S. state, states, a Washington, D.C., federal district, five ma ...

and

Canada Canada is a country in North America. Its ten provinces and three territories extend from the Atlantic Ocean to the Pacific Ocean and northward into the Arctic Ocean, covering over , making it the world's second-largest country by tota ...

. * EIA-708 (a closed captioning standard for

) * CEA-709.1-B Control Network Protocol Specification

800–899

* TIA/EIA/IS-880 TIA-41-D Based Network Enhancements for CDMA Packet Data Service (C-PDS) Phase 1

900–999

TIA-968-A A registered jack (RJ) is a standardized telecommunication network interface for connecting voice and data equipment to a service provided by a local exchange carrier or long distance carrier. Registration interfaces were first defined in the ...

Technical Requirements for Connection of Terminal Equipment to the Telephone Network

1000–1099

TIA-1096-A A registered jack (RJ) is a standardized telecommunication network interface for connecting voice and data equipment to a service provided by a local exchange carrier or long distance carrier. Registration interfaces were first defined in the ...

Connector Requirements for Connection of Terminal Equipment to the Telephone Network

2000–2099

* TIA/EIA/IS-2000.5-A Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum Systems * TIA/EIA/IS-2000.5-C Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum Systems

3100–3199

* EIA SP 3128 POLARIZING/CODING KEY OVERSTRESS TEST PROCEDURE FOR ELECTRICAL CONNECTORS

Notes

* The above list of standards is not only incomplete, but also out of date. For example, the standard on capacitor dielectric classes is as of Nov 2002: EIA-198-1-F Ceramic Dielectric Capacitors: Classes I, II, III, and IV * RS is for " Recommended Standard", an early prefix used for electronic standards

References

{{Reflist