The Cable Liner is a range of
automated people mover products designed by
Doppelmayr Cable Car for use at
airports, in
city center
A city centre is the commercial, cultural and often the historical, political, and geographic heart of a city. The term "city centre" is primarily used in British English, and closely equivalent terms exist in other languages, such as "" in Fren ...
s,
intermodal passenger transport
Intermodal passenger transport, also called mixed-mode commuting, involves using two or more modes of transportation in a journey. Mixed-mode commuting is often used to combine the strengths (and offset the weaknesses) of various transportati ...
connections,
park and ride
A park and ride, also known as incentive parking or a commuter lot, is a parking lot with public transport connections that allows commuters and other people heading to city centres to leave their vehicles and transfer to a bus, rail system ...
facilities, campuses, resorts and
amusement parks
An amusement park is a park that features various attractions, such as rides and games, as well as other events for entertainment purposes. A theme park is a type of amusement park that bases its structures and attractions around a central ...
.
The design superseded the
maglev
Maglev (derived from '' magnetic levitation''), is a system of train transportation that uses two sets of electromagnets: one set to repel and push the train up off the track, and another set to move the elevated train ahead, taking advantag ...
transport system at
Birmingham Airport
Birmingham Airport , formerly ''Birmingham International Airport'', is an international airport located east-southeast of Birmingham city centre, west-northwest of Coventry slightly north of Bickenhill village, in the Metropolitan Boroug ...
which was, at the time, the world’s only commercial maglev system. The technology was used for the new
AirRail Link on the existing maglev guideway to replace the previous system and temporary bus-service shuttle that had been operating in the meantime.
System features

The automated people mover systems are based on
cable-propelled technology. The manufacturer claims distances up to and a peak passenger flow of up to 7,000
pphpd (people per hour per direction) are possible.
In a cable-propelled automated people mover system, a central station powers the system, and therefore the train has no on-board drive engines, gearboxes or brakes. A fixed grip assembly connects the train to the cable.
The cable
propels,
accelerates, and decelerates the train.
The system operation is monitored from a central control room; there are no drivers, conductors or operators on-board.
The evacuation system is based on an independent stationary diesel emergency drive that would pull a stranded train back to the station, eliminating the need for an emergency walkway. Trains like these can be also used for different purposes, such as moving trailers and barge loaders.
Guideway
The automated people mover uses a self-supporting steel guideway. It is a light steel guideway, which is possible because of the use of lighter trains. The track consists of an I-beam which forms the running and guiding surface.
The guideway superstructure is a steel framework construction. The guideway does not require heating in harsh winter conditions.
Steel adapters between the steel truss guideway and the concrete columns allow height adjustments to compensate for ground settlements. The track can span more than 67 m (220 ft).
Because the guideway superstructure is a steel framework construction and do not have a solid track base,
platform screen doors
Platform screen doors (PSDs), also known as platform edge doors (PEDs), are used at some train, rapid transit and people mover stations to separate the platform from train tracks, as well as on some bus rapid transit, tram and light rail syste ...
are used at stations on the system.
Vehicles

The trains are bidirectional. The car is a self-supporting lightweight design with extruded aluminium box-type profile sections. The integral
monocoque
Monocoque ( ), also called structural skin, is a structural system in which loads are supported by an object's external skin, in a manner similar to an egg shell. The word ''monocoque'' is a French term for "single shell".
First used for boats, ...
structure is bolted and riveted and joint connections are aluminium castings. The
aluminium
Aluminium (aluminum in AmE, American and CanE, Canadian English) is a chemical element with the Symbol (chemistry), symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately o ...
sections are made of high-grade,
corrosion-resistant
Corrosion is a natural process that converts a refined metal into a more chemically stable oxide. It is the gradual deterioration of materials (usually a metal) by chemical or electrochemical reaction with their environment. Corrosion engi ...
alloy
An alloy is a mixture of chemical elements of which at least one is a metal. Unlike chemical compounds with metallic bases, an alloy will retain all the properties of a metal in the resulting material, such as electrical conductivity, ductilit ...
.
The undercarriage supports are integrated into the car body and take the form of cavity-sealed tubular steel frames. The design is torsion-free. The vehicle interior is predominantly aluminium, with no heat release.
The vehicles are usually manufactured by Swiss cabin manufacturer,
CWA Constructions
Doppelmayr/Garaventa Group is an international manufacturer of ropeways and people movers for ski areas, urban transport, amusement parks, and material handling systems. As of 2019, the group have produced over 15,000 installations in 96 countri ...
, itself a subsidiary of Doppelmayr Garaventa Group; or Austrian cabin manufacturer, Carvatech.
Configurations
There are three main system configurations in use.
Shuttle
The "Single Shuttle" system is the simplest configuration, with one train operating in both directions on one guideway track.
The "Double Shuttle" configuration features two independent shuttle systems operating side by side on a double guideway track, each with its own haul rope and drive machinery. If one shuttle system fails or is closed for maintenance, the other system may continue to operate.
This configuration is designed for system lengths up to 3 km (1.8 mi) and may have several intermediate stations.
The frequency and passenger capacity of both shuttle systems depends largely on the length of the system, and the number of intermediate stations. The passenger capacity additionally depends on the capacity of the train.
Bypass
In this system, only one guideway enters each end station, but movable switches direct trains onto dual tracks between stations so they can pass one another en route.
The bypass must be located approximately in the middle of two terminal end stations, and can form part of an intermediate station. This configuration is comparable to the Double Shuttle system in terms of capacity and frequency (headway). Either each train has its own haul rope or both trains are attached to the same haul rope depending on the application requirements (station configuration, system length, etc.).
Pinched Loop
This system creates a circular train flow where more than one train moves in the same direction. The principle of this system is based on several rope loops which adjoin and overlap each other in the stations. Every haul rope loop is supplied with its own drive and return machinery.
In every station each vehicle of the train has to be disconnected from the current haul rope to the next haul rope in order to continue the circular and synchronized train flow. The haul rope loop change may occur only when all the trains are positioned at the standard stop position in the stations and are standstill and will be carried out during boarding/alighting of the passengers.
Switches installed at the end stations will guide the train from one lane of the double lane track over to a single guideway in the end stations. During the station stop the switch will be repositioned that the train can leave the station at the other lane of the double lane track. For the functionality of the Pinched Loop concept the stations spans have to be approximately equidistant from each other.
Installations
*
Mandalay Bay Tram system installed in Las Vegas
*
Aria Express installed in Las Vegas
*
LINK Train
The Terminal Link (formerly Link Train) is an automated people mover (APM) at Toronto Pearson International Airport in Mississauga, Ontario, Canada.The 1.5 km line connects Terminals 1 and 3 (there is no longer a Terminal 2) and the Viscount R ...
system installed in
Toronto Pearson International Airport
Lester B. Pearson International Airport , commonly known as Toronto Pearson International Airport, is an international airport located in Mississauga, Ontario, Canada. It is the main airport serving Toronto, its metropolitan area, and the sur ...
*
AirRail Link system at Birmingham International Airport
*
Aerotren system at Mexico International Airport
*
People Mover
A people mover or automated people mover (APM) is a type of small scale automated guideway transit system. The term is generally used only to describe systems serving relatively small areas such as airports, downtown districts or theme parks. ...
in Venice
*
Cabletren Bolivariano system installed in Caracas
*
BART to OAK Airport, connecting the
BART
Bart is a masculine given name, usually a diminutive of Bartholomew, sometimes of Barton, Bartolomeo, etc.
Bart is a Dutch and Ashkenazi Jewish surname, and derives from the name ''Bartholomäus'', a German form of the biblical name ''Barth ...
system to
Oakland International Airport
Oakland International Airport is an international airport in Oakland, California, United States, 10 miles (16 km) south of downtown located in the San Francisco Bay Area. It is owned by the Port of Oakland and has domestic passenger ...
*
Automated Passenger Transportation System (APTS) at
Sheremetyevo International Airport
Sheremetyevo Alexander S. Pushkin International Airport ( rus, links=no, Международный аэропорт Шереметьево имени А. С. Пушкина, p=ʂɨrʲɪˈmʲetʲjɪvə ''Mezhdunarodny aeroport Sheremetyevo imen ...
[ ]
*
Hamad International Airport
Hamad International Airport ( ar, مطار حمد الدولي, ') is an international airport in the State of Qatar, and the home of Qatar’s flag carrier airline, Qatar Airways. Located east of its capital, Doha, it replaced the nearby Doh ...
Shuttle installed in
Doha
Doha ( ar, الدوحة, ad-Dawḥa or ''ad-Dōḥa'') is the capital city and main financial hub of Qatar. Located on the Persian Gulf coast in the east of the country, north of Al Wakrah and south of Al Khor, it is home to most of the c ...
*
Luton DART (under construction) at
Luton Airport
London Luton Airport is an international airport located in Luton, Bedfordshire, England, situated east of the town centre, and north of Central London. The airport is owned by London Luton Airport Ltd (LLAL), a company wholly owned by L ...
near London, UK
See also
*
Cable car (railway)
A cable car (usually known as a cable tram outside North America) is a type of cable railway used for mass transit in which rail cars are hauled by a continuously moving cable running at a constant speed. Individual cars stop and start by re ...
*
Funicular
A funicular (, , ) is a type of cable railway system that connects points along a railway track laid on a steep slope. The system is characterized by two counterbalanced carriages (also called cars or trains) permanently attached to opposite e ...
*
MiniMetro
Notes
References
{{Reflist
External links
DCC Doppelmayr Cable Car
Cable Liner
Doppelmayr/Garaventa Group