The Beneteau Escapade is a French
sailboat
A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture.
Types
Although sailboat terminology ...
that was designed by
André Bénéteau as a
cruiser
A cruiser is a type of warship. Modern cruisers are generally the largest ships in a fleet after aircraft carriers and amphibious assault ships, and can usually perform several operational roles from search-and-destroy to ocean escort to sea ...
and first built in 1976.
Production
The design was built by
Beneteau
Beneteau or Bénéteau () is a French sail and motorboat manufacturer, with production facilities in France and in the United States. The company is a large and recognized boat builder, with its holding company (Groupe Beneteau) now also holdin ...
in France, starting in 1976, but it is now out of production.
Design
The Escapade is a recreational
keelboat
A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open w ...
, built predominantly of
glassfibre
Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass clo ...
, with wood trim. It has a
cutter rig
A cutter is any of various types of watercraft. The term can refer to the rig (sail plan) of a sailing vessel (but with regional differences in definition), to a governmental enforcement agency vessel (such as a coast guard or border force cutt ...
with a
bowsprit
The bowsprit of a sailing vessel is a spar (sailing), spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay that counteracts the forces from the forestay, forestays. The bowsprit’s purpose is to create ...
, with one set of unswept
spreaders and
aluminium
Aluminium (or aluminum in North American English) is a chemical element; it has chemical symbol, symbol Al and atomic number 13. It has a density lower than that of other common metals, about one-third that of steel. Aluminium has ...
spars with
stainless steel
Stainless steel, also known as inox, corrosion-resistant steel (CRES), or rustless steel, is an iron-based alloy that contains chromium, making it resistant to rust and corrosion. Stainless steel's resistance to corrosion comes from its chromi ...
wire
standing rigging
Standing rigging comprises the fixed lines, wires, or rods, which support each mast or bowsprit on a sailing vessel and reinforce those spars against wind loads transferred from the sails. This term is used in contrast to running rigging, w ...
. The hull has a highly
raked stem
The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively.
Description
The stem is the curved edge stretching from the keel below, up to ...
, an angled
transom, an
keel
The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...
-mounted
rudder
A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, airship, or other vehicle that moves through a fluid medium (usually air or water). On an airplane, the rudder is used primarily to counter adverse yaw ...
controlled by a
tiller
A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post, rudder post or stock to provide leverage in the form of torque for the helmsman to turn ...
and a fixed long
keel
The keel is the bottom-most longitudinal structural element of a watercraft, important for stability. On some sailboats, it may have a fluid dynamics, hydrodynamic and counterbalancing purpose as well. The keel laying, laying of the keel is often ...
. It displaces and carries of ballast.
The boat has a draft of with the standard keel.
The boat is fitted with an
inboard diesel engine
The diesel engine, named after the German engineer Rudolf Diesel, is an internal combustion engine in which Combustion, ignition of diesel fuel is caused by the elevated temperature of the air in the cylinder due to Mechanics, mechanical Compr ...
for docking and manoeuvring. The fuel tank holds and the
fresh water
Fresh water or freshwater is any naturally occurring liquid or frozen water containing low concentrations of dissolved salt (chemistry), salts and other total dissolved solids. The term excludes seawater and brackish water, but it does include ...
tank has a capacity of .
The design has sleeping accommodation for five people, with a double
"V"-berth
A sleeping berth is a bed or sleeping accommodation on vehicles. Space accommodations have contributed to certain common design elements of berths.
Beds in boats or ships
While beds on large ships are little different from those on shore, ...
berth in the bow cabin, a drop down dinette table that forms a double berth in the main salon and a
quarter berth
A sleeping berth is a bed or sleeping accommodation on vehicles. Space accommodations have contributed to certain common design elements of berths.
Beds in boats or ships
While beds on large ships are little different from those on shore, ...
on the starboard side, under the cockpit. The
galley
A galley is a type of ship optimised for propulsion by oars. Galleys were historically used for naval warfare, warfare, Maritime transport, trade, and piracy mostly in the seas surrounding Europe. It developed in the Mediterranean world during ...
is located on the starboard side of the main salon. The galley is of straight configuration and is equipped with a two-burner stove, an ice box and a sink. A sliding chart table is mounted aft of the galley, on the starboard side. The
head
A head is the part of an organism which usually includes the ears, brain, forehead, cheeks, chin, eyes, nose, and mouth, each of which aid in various sensory functions such as sight, hearing, smell, and taste. Some very simple ani ...
is located just aft of the bow cabin.
For sailing downwind the design may be equipped with a symmetrical
spinnaker
A spinnaker is a sail designed specifically for sailing off the wind on courses between a Point of sail#Reaching, reach (wind at 90° to the course) to Point of sail#Running downwind, downwind (course in the same direction as the wind). Spinna ...
.
The design has a
hull speed
Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to- ...
of .
See also
*
List of sailing boat types
The following is a partial list of sailboat types and sailing classes, including keelboats, dinghy, dinghies, and multihull (catamarans and trimarans).
Olympic classes
World Sailing Classes
Historically known as the IYRU (International Yacht ...
References
External links
*
{{Beneteau
Keelboats
1970s sailboat type designs
Sailing yachts
Sailboat type designs by André Bénéteau
Sailboat types built by Beneteau