Basse-Chaîne Bridge
   HOME

TheInfoList



OR:

Angers Bridge, also called the Basse-Chaîne Bridge, was a
suspension bridge A suspension bridge is a type of bridge in which the deck (bridge), deck is hung below suspension wire rope, cables on vertical suspenders. The first modern examples of this type of bridge were built in the early 1800s. Simple suspension bridg ...
over the Maine River in
Angers Angers (, , ;) is a city in western France, about southwest of Paris. It is the Prefectures of France, prefecture of the Maine-et-Loire department and was the capital of the province of Duchy of Anjou, Anjou until the French Revolution. The i ...
, France. It was designed by
Joseph Chaley Joseph Chaley (1795 – April 15, 1861) was a French civil engineer and a pioneer designer of suspension bridges in the 19th century. He was a medical officer in the army before becoming a bridge designer. Chaley pioneered the construction of suspe ...
and Bordillon, and built between 1836 and 1839.Peters, Tom F., ''"Transitions in Engineering: Guillaume Henri Dufour and the Early 19th Century Cable Suspension Bridges"'', Birkhauser, 1987, The bridge collapsed on 16 April 1850, while a battalion of French soldiers were
marching Marching refers to the organized, uniformed, steady walking forward in either rhythmic or route-step time; and, typically, it refers to overland movements on foot of military troops and units under field orders. Marching is often perform ...
across it, killing over 200. The bridge spanned , with two wire cables carrying a deck wide. Its towers consisted of
cast iron Cast iron is a class of iron–carbon alloys with a carbon content of more than 2% and silicon content around 1–3%. Its usefulness derives from its relatively low melting temperature. The alloying elements determine the form in which its car ...
columns tall.


Collapse

Soldiers stationed in the region frequently used the bridge, and two battalions of the same regiment had crossed earlier that day. The third battalion arrived during a powerful thunderstorm when the wind was making the bridge oscillate. When the soldiers began to cross, their bodies acted as sails, further catching the wind. Survivors reported that they had been walking as if drunk and could barely keep themselves from falling, first to one side and then to the other. As usual in crossing that bridge, the soldiers had been ordered to break step and to space themselves farther apart than normal. However, their efforts to match the swaying and keep their balance may have caused them to involuntarily march with the same cadence, causing
resonance Resonance is a phenomenon that occurs when an object or system is subjected to an external force or vibration whose frequency matches a resonant frequency (or resonance frequency) of the system, defined as a frequency that generates a maximu ...
. In any case, the oscillation increased. At a time when the bridge was covered with 483 soldiers and four other people (although the police had prevented many curiosity seekers from joining the march), the upstream anchoring cable on the right bank broke in its concrete mooring, three to four meters underground, with a noise like "a badly done volley from a firing squad". The adjacent downstream cable broke a second later, and the right-bank end of the deck fell, making the deck slope very steep and throwing soldiers into the river. Many of those who fell were saved by their fellow soldiers who had not yet crossed and by residents of Angers who came to the rescue, but a total of 226 people died. The failure was attributed to dynamic load due to the storm and the soldiers, particularly as they seem to have been somewhat in step, combined with
corrosion Corrosion is a natural process that converts a refined metal into a more chemically stable oxide. It is the gradual deterioration of materials (usually a metal) by chemical or electrochemical reaction with their environment. Corrosion engine ...
of the anchors for the main cables. The cable anchorages at Angers were found to be highly vulnerable, as they were surrounded by cement, which was believed to
rustproof Rustproofing is the prevention or delay of rusting of iron and steel objects, or the permanent wikt:protection, protection against corrosion. Typically, the protection is achieved by a process of surface finishing or treatment. Depending on mec ...
them for the indefinite future. However, the wire strands separated from their cement surrounds. This allowed water to penetrate and corrode the wires.


Aftermath

The disaster led France to abandon suspension bridges until 1870. There had been similar failures elsewhere, such as that at
Great Yarmouth Great Yarmouth ( ), often called Yarmouth, is a seaside resort, seaside town which gives its name to the wider Borough of Great Yarmouth in Norfolk, England; it straddles the River Yare and is located east of Norwich. Its fishing industry, m ...
in England in May 1845, when 79 people were killed by the fall of the main deck. The fall of the Angers bridge raised serious questions about the integrity of suspension bridges, and some engineers (such as John A. Roebling) used reinforced decks in future structures such as the
Brooklyn Bridge The Brooklyn Bridge is a cable-stayed suspension bridge in New York City, spanning the East River between the boroughs of Manhattan and Brooklyn. Opened on May 24, 1883, the Brooklyn Bridge was the first fixed crossing of the East River. It w ...
.
Louis Vicat Louis Vicat (31 March 1786, Nevers – 10 April 1861, Grenoble) was a French engineer. He graduated from the École Polytechnique in 1804 and the École des Ponts et Chaussées in 1806. Vicat studied the setting of mortars and developed his ow ...
reported in 1853 on the problems with the anchorages, and all similar bridges in France had to be carefully inspected. A new bridge was built on the same site in 1960, using
reinforced concrete Reinforced concrete, also called ferroconcrete or ferro-concrete, is a composite material in which concrete's relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ...
beams.


Related bridge failures

The Angers bridge was not the first suspension bridge to collapse. Previous failures included the
Dryburgh Abbey Bridge Dryburgh Abbey Bridge was a cable-stayed bridge, cable-stayed footbridge of significant historical interest erected near Dryburgh Abbey, in the Scottish Borders, Borders of Scotland. It connected the villages of Dryburgh and St. Boswells (part o ...
in 1818 and
The Royal Suspension Chain Pier The Royal Suspension Chain Pier was the first major pier built in Brighton, England. Opened on 25 November 1823, it was destroyed during a storm on 4 December 1896. History Generally known as the ''Chain Pier'', it was designed by Captain S ...
in
Brighton Brighton ( ) is a seaside resort in the city status in the United Kingdom, city of Brighton and Hove, East Sussex, England, south of London. Archaeological evidence of settlement in the area dates back to the Bronze Age Britain, Bronze Age, R ...
in 1836. The
Menai Suspension Bridge The Menai Suspension Bridge ( or ) is a suspension bridge spanning the Menai Strait between the island of Anglesey and the mainland of Wales. Designed by Thomas Telford and completed in 1826, it was the world's first major suspension bridge. Th ...
was damaged by wind in 1825, 1836 and 1839. The
Broughton Suspension Bridge Broughton Suspension Bridge was an Suspension bridge, iron chain suspension bridge built in 1826 to span the River Irwell between Broughton, Greater Manchester, Broughton and Pendleton, Greater Manchester, Pendleton, now in Salford, Greater Manc ...
had collapsed in 1831 when soldiers marched over it in step. Subsequent spectacular suspension bridge collapses caused by wind include the failure of the
Tacoma Narrows Bridge The Tacoma Narrows Bridge is a pair of twin bridges, twin suspension bridges that span the Tacoma Narrows strait of Puget Sound in Pierce County, Washington, Pierce County, Washington (state), Washington. The bridges connect the city of Tacom ...
in 1940. However, the Angers bridge failure caused by far the greatest number of casualties. When the London Thames Millennium Bridge was opened in 2000, the motion of pedestrians caused it to vibrate, and they fell into step with the vibrations, increasing them. Abstract only; full text requires fee or membership. This same mechanism may have increased the vibrations of the Angers Bridge. The problem at the Millennium Bridge was corrected during the next two years.


References


Further reading

* R.E.D. Bishop, ''Vibration'', Cambridge University Press (1965) for a discussion of the engineering problems of unwanted vibrations. * J.P. Den Hartog, ''Mechanical Vibrations'', Dover Publications (1985)


External links

*
"The Angers Bridge catastrophe"
English translation of article originally in ''La Revue du Musée des arts et métiers''
Angers bridge collapse at Bridgemeister
''
Village Voice ''The Village Voice'' is an American news and culture publication based in Greenwich Village, New York City, known for being the country's first alternative newsweekly. Founded in 1955 by Dan Wolf, Ed Fancher, John Wilcock, and Norman Ma ...
'', 27 August – 2 September 2003, by Robert Julavits for problem on the Brooklyn bridge
British 'Millennium' or 'Wobbly Bridge', built 2000
{{coord, 47, 28, 14, N, 00, 33, 50, W, type:landmark_region:FR, display=title Bridge disasters in France Bridge disasters caused by engineering error
Bridge A bridge is a structure built to Span (engineering), span a physical obstacle (such as a body of water, valley, road, or railway) without blocking the path underneath. It is constructed for the purpose of providing passage over the obstacle, whi ...
Bridges completed in 1839 Suspension bridges in France 1850 in France 1850 disasters 19th-century disasters in France 19th-century military history of France 1850 in military history Former bridges in France History of Maine-et-Loire