Banach Norm

In mathematics, more specifically in functional analysis, a Banach space (, ) is a complete normed vector space. Thus, a Banach space is a vector space with a metric that allows the computation of vector length and distance between vectors and is complete in the sense that a Cauchy sequence of vectors always converges to a well-defined limit that is within the space.

Banach spaces are named after the Polish mathematician Stefan Banach, who introduced this concept and studied it systematically in 1920–1922 along with Hans Hahn and Eduard Helly.
Maurice René Fréchet was the first to use the term "Banach space" and Banach in turn then coined the term "Fréchet space".
Banach spaces originally grew out of the study of function spaces by Hilbert, Fréchet, and Riesz earlier in the century. Banach spaces play a central role in functional analysis. In other areas of analysis, the spaces under study are often Banach spaces.

Definition

A Banach space is a complete normed space $(X, \, \, ).$
A normed space is a pairIt is common to read instead of the more technically correct but (usually) pedantic especially if the norm is well known (for example, such as with $\mathcal^p$ spaces) or when there is no particular need to choose any one (equivalent) norm over any other (especially in the more abstract theory of topological vector spaces), in which case this norm (if needed) is often automatically assumed to be denoted by $\, \, .$ However, in situations where emphasis is placed on the norm, it is common to see $(X, \, \, )$ written instead of $X.$ The technically correct definition of normed spaces as pairs $(X, \, \, )$ may also become important in the context of category theory where the distinction between the categories of normed spaces, normable spaces, metric spaces, TVSs, topological spaces, etc. is usually important.
$(X, \, \, )$ consisting of a vector space $X$ over a scalar field $\mathbb$ (where $\mathbb$ is commonly $\Reals$ or $\Complex$) together with a distinguishedThis means that if the norm $\, \,$ is replaced with a different norm $\, \, '$ on $X,$ then $(X, \, \, )$ is the same normed space as $(X, \, \, '),$ not even if the norms are equivalent. However, equivalence of norms on a given vector space does form an equivalence relation.
norm $\, \, : X \to \Reals.$ Like all norms, this norm induces a translation invariantA metric $D$ on a vector space $X$ is said to be ''translation invariant'' if $D(x, y) = D(x + z, y + z)$ for all vectors $x, y, z \in X.$ This happens if and only if $D(x, y) = D(x - y, 0)$ for all vectors $x, y \in X.$ A metric that is induced by a norm is always translation invariant.
distance function, called the ''canonical'' or ''(norm) induced metric'', defined for all vectors $x, y \in X$ byBecause $\, \, = \, z\,$ for all $z \in X,$ it is always true that $d(x, y) := \, y - x\, = \, x - y\,$ for all $x, y \in X.$ So the order of $x$ and $y$ in this definition does not matter.
$d(x, y) := \, y - x\, = \, x - y\, .$
This makes $X$ into a metric space $(X, d).$
A sequence $x_1, x_2, \ldots$ is called or or if for every real $r > 0,$ there exists some index $N$ such that
$d(x_n, x_m) = \, x_n - x_m\, < r$
whenever $m$ and $n$ are greater than $N.$
The normed space $(X, \, \, )$ is called a Banach space and the canonical metric $d$ is called a ''complete metric'' if $(X, d)$ is a complete metric space, which by definition means for every Cauchy sequence $x_1, x_2, \ldots$ in $(X, d),$ there exists some $x \in X$ such that
$\lim_ x_n = x \; \text (X, d),$
where because $\, x_n - x\, = d(x_n, x),$ this sequence's convergence to $x$ can equivalently be expressed as
$\lim_ \, x_n - x\, = 0 \; \text \Reals.$

The norm $\, \,$ of a normed space $(X, \, \, )$ is called a if $(X, \, \, )$ is a Banach space.

L-semi-inner product

For any normed space $(X, \, \, ),$ there exists an L-semi-inner product $\langle\cdot, \cdot\rangle$ on $X$ such that $\, x\, = \sqrt$ for all $x \in X.$ In general, there may be infinitely many L-semi-inner products that satisfy this condition and the proof of the existence of L-semi-inner products relies on the non-constructive Hahn–Banach theorem. L-semi-inner products are a generalization of inner products, which are what fundamentally distinguish Hilbert spaces from all other Banach spaces. This shows that all normed spaces (and hence all Banach spaces) can be considered as being generalizations of (pre-)Hilbert spaces.

Characterization in terms of series

The vector space structure allows one to relate the behavior of Cauchy sequences to that of converging series of vectors.
A normed space $X$ is a Banach space if and only if each absolutely convergent series in $X$ converges to a value that lies within $X,$ symbolically
$\sum_^ \, v_n\, < \infty \implies \sum_^ v_n\text X.$

Topology

The canonical metric $d$ of a normed space $(X, \, \, )$ induces the usual metric topology $\tau_d$ on $X,$ which is referred to as the ''canonical'' or ''norm induced topology''.
Every normed space is automatically assumed to carry this Hausdorff topology, unless indicated otherwise.
With this topology, every Banach space is a Baire space, although there exist normed spaces that are Baire but not Banach. The norm $\, \, : X \to \Reals$ is always a continuous function with respect to the topology that it induces.

The open and closed balls of radius $r > 0$ centered at a point $x \in X$ are, respectively, the sets
$B_r(x) := \ \qquad \text \qquad C_r(x) := \.$
Any such ball is a convex and bounded subset of $X,$ but a compact ball/neighborhood exists if and only if $X$ is finite-dimensional.
In particular, no infinite–dimensional normed space can be locally compact or have the Heine–Borel property.
If $x_0$ is a vector and $s \neq 0$ is a scalar, then
$x_0 + s\,B_r(x) = B_(x_0 + s x) \qquad \text \qquad x_0 + s\,C_r(x) = C_(x_0 + s x).$
Using $s = 1$ shows that the norm-induced topology is translation invariant, which means that for any $x \in X$ and $S \subseteq X,$ the subset $S$ is open (respectively, closed) in $X$ if and only if its translation $x + S := \$ is open (respectively, closed).
Consequently, the norm induced topology is completely determined by any neighbourhood basis at the origin. Some common neighborhood bases at the origin include
$\, \qquad \, \qquad \, \qquad \text \qquad \,$
where $r_1, r_2, \ldots$ can be any sequence of positive real numbers that converges to $0$ in $\R$ (common choices are $r_n := \tfrac$ or $r_n := 1/2^n$).
So, for example, any open subset $U$ of $X$ can be written as a union
$U = \bigcup_ B_(x) = \bigcup_ x + B_(0) = \bigcup_ x + r_x\,B_1(0)$
indexed by some subset $I \subseteq U,$ where each $r_x$ may be chosen from the aforementioned sequence $r_1, r_2, \ldots.$ (The open balls can also be replaced with closed balls, although the indexing set $I$ and radii $r_x$ may then also need to be replaced).
Additionally, $I$ can always be chosen to be countable if $X$ is a , which by definition means that $X$ contains some countable dense subset.

Homeomorphism classes of separable Banach spaces

All finite–dimensional normed spaces are separable Banach spaces and any two Banach spaces of the same finite dimension are linearly homeomorphic.
Every separable infinite–dimensional Hilbert space is linearly isometrically isomorphic to the separable Hilbert sequence space $\ell^2(\N)$ with its usual norm $\, \, _2.$

The Anderson–Kadec theorem states that every infinite–dimensional separable Fréchet space is homeomorphic to the product space $\prod_ \Reals$ of countably many copies of $\Reals$ (this homeomorphism need not be a linear map).
Thus all infinite–dimensional separable Fréchet spaces are homeomorphic to each other (or said differently, their topology is unique up to a homeomorphism).
Since every Banach space is a Fréchet space, this is also true of all infinite–dimensional separable Banach spaces, including $\ell^2(\N).$
In fact, $\ell^2(\N)$ is even homeomorphic to its own unit $\,$ which stands in sharp contrast to finite–dimensional spaces (the Euclidean plane $\Reals^2$ is not homeomorphic to the unit circle, for instance).

This pattern in homeomorphism classes extends to generalizations of metrizable ( locally Euclidean) topological manifolds known as , which are metric spaces that are around every point, locally homeomorphic to some open subset of a given Banach space (metric Hilbert manifolds and metric Fréchet manifolds are defined similarly).
For example, every open subset $U$ of a Banach space $X$ is canonically a metric Banach manifold modeled on $X$ since the inclusion map $U \to X$ is an open local homeomorphism.
Using Hilbert space microbundles, David Henderson showed in 1969 that every metric manifold modeled on a separable infinite–dimensional Banach (or Fréchet) space can be topologically embedded as an subset of $\ell^2(\N)$ and, consequently, also admits a unique smooth structure making it into a $C^\infty$ Hilbert manifold.

Compact and convex subsets

There is a compact subset $S$ of $\ell^2(\N)$ whose convex hull $\operatorname(S)$ is closed and thus also compact.Let $H$ be the separable Hilbert space $\ell^2(\N)$ of square-summable sequences with the usual norm $\, \, _2,$ and let $e_n = (0, \ldots, 0, 1, 0, \ldots, 0)$ be the standard orthonormal basis (that is, each $e_n$ has zeros in every position except for a $1$ in the $n$^th-position). The closed set $S = \ \cup \$ is compact (because it is sequentially compact) but its convex hull $\operatorname S$ is a closed set because the point $h := \sum_^ \tfrac \tfrac e_n$ belongs to the closure of $\operatorname S$ in $H$ but $h \not\in\operatorname S$ (since every point $z=(z_1,z_2,\ldots) \in \operatorname S$ is a finite convex combination of elements of $S$ and so $z_n = 0$ for all but finitely many coordinates, which is not true of $h$). However, like in all complete Hausdorff locally convex spaces, the convex hull $K := \overline S$ of this compact subset is compact. The vector subspace $X := \operatorname S = \operatorname \$ is a pre-Hilbert space when endowed with the substructure that the Hilbert space $H$ induces on it, but $X$ is not complete and $h \not\in C := K \cap X$ (since $h \not\in X$). The closed convex hull of $S$ in $X$ (here, "closed" means with respect to $X,$ and not to $H$ as before) is equal to $K \cap X,$ which is not compact (because it is not a complete subset). This shows that in a Hausdorff locally convex space that is not complete, the closed convex hull of a compact subset might to be compact (although it will be precompact/totally bounded).
However, like in all Banach spaces, the convex hull $\overline S$ of this (and every other) compact subset will be compact. In a normed space that is not complete then it is in general guaranteed that $\overline S$ will be compact whenever $S$ is; an example can even be found in a (non-complete) pre-Hilbert vector subspace of $\ell^2(\N).$

As a topological vector space

This norm-induced topology also makes $(X, \tau_d)$ into what is known as a topological vector space (TVS), which by definition is a vector space endowed with a topology making the operations of addition and scalar multiplication continuous. It is emphasized that the TVS $(X, \tau_d)$ is a vector space together with a certain type of topology; that is to say, when considered as a TVS, it is associated with particular norm or metric (both of which are " forgotten"). This Hausdorff TVS $(X, \tau_d)$ is even locally convex because the set of all open balls centered at the origin forms a neighbourhood basis at the origin consisting of convex balanced open sets. This TVS is also , which by definition refers to any TVS whose topology is induced by some (possibly unknown) norm. Normable TVSs are characterized by being Hausdorff and having a bounded convex neighborhood of the origin.
All Banach spaces are barrelled spaces, which means that every barrel is neighborhood of the origin (all closed balls centered at the origin are barrels, for example) and guarantees that the Banach–Steinhaus theorem holds.

Comparison of complete metrizable vector topologies

The open mapping theorem implies that when $\tau_1$ and $\tau_2$ are topologies on $X$ that make both $(X, \tau_1)$ and $(X, \tau_2)$ into complete metrizable TVSes (for example, Banach or Fréchet spaces), if one topology is finer or coarser than the other, then they must be equal (that is, if $\tau_1 \subseteq \tau_2$ or $\tau_2 \subseteq \tau_1$ then $\tau_1 = \tau_2$).
So, for example, if $(X, p)$ and $(X, q)$ are Banach spaces with topologies $\tau_p$ and $\tau_q,$ and if one of these spaces has some open ball that is also an open subset of the other space (or, equivalently, if one of $p : (X, \tau_q) \to \Reals$ or $q : (X, \tau_p) \to \Reals$ is continuous), then their topologies are identical and the norms $p$ and $q$ are equivalent.

Completeness

Complete norms and equivalent norms

Two norms, $p$ and $q,$ on a vector space $X$ are said to be ''equivalent'' if they induce the same topology; this happens if and only if there exist real numbers $c,C > 0$ such that $c\,q(x) \leq p(x) \leq C\,q(x)$ for all $x \in X.$ If $p$ and $q$ are two equivalent norms on a vector space $X$ then $(X, p)$ is a Banach space if and only if $(X, q)$ is a Banach space.
See this footnote for an example of a continuous norm on a Banach space that is equivalent to that Banach space's given norm.Let $(C($, 1, , \, _) denote the Banach space of continuous functions with the supremum norm and let $\tau_$ denote the topology on $C($, 1 induced by $\, \, _.$ The vector space $C($, 1 can be identified (via the inclusion map) as a proper dense vector subspace $X$ of the $L^1$ space $(L^1($, 1, \, \, _1), which satisfies $\, f\, _1 \leq \, f\, _$ for all $f \in X.$ Let $p$ denote the restriction of $\, \, _1$ to $X,$ which makes this map $p : X \to \R$ a norm on $X$ (in general, the restriction of any norm to any vector subspace will necessarily again be a norm). The normed space $(X, p)$ is a Banach space since its completion is the proper superset $(L^1($, 1, \, \, _1). Because $p \leq \, \, _$ holds on $X,$ the map $p : (X, \tau_) \to \R$ is continuous. Despite this, the norm $p$ is equivalent to the norm $\, \, _$ (because $(X, \, \, _)$ is complete but $(X, p)$ is not).
All norms on a finite-dimensional vector space are equivalent and every finite-dimensional normed space is a Banach space.

Complete norms vs complete metrics

A metric $D$ on a vector space $X$ is induced by a norm on $X$ if and only if $D$ is translation invariant and ''absolutely homogeneous'', which means that $D(sx, sy) = , s, D(x, y)$ for all scalars $s$ and all $x, y \in X,$ in which case the function $\, x\, := D(x, 0)$ defines a norm on $X$ and the canonical metric induced by $\, \,$ is equal to $D.$

Suppose that $(X, \, \, )$ is a normed space and that $\tau$ is the norm topology induced on $X.$ Suppose that $D$ is metric on $X$ such that the topology that $D$ induces on $X$ is equal to $\tau.$ If $D$ is translation invariant then $(X, \, \, )$ is a Banach space if and only if $(X, D)$ is a complete metric space.
If $D$ is translation invariant, then it may be possible for $(X, \, \, )$ to be a Banach space but for $(X, D)$ to be a complete metric space (see this footnoteThe normed space $(\R,, \cdot , )$ is a Banach space where the absolute value is a norm on the real line $\R$ that induces the usual Euclidean topology on $\R.$ Define a metric $D : \R \times \R \to \R$ on $\R$ by $D(x, y) =, \arctan(x) - \arctan(y),$ for all $x, y \in \R.$ Just like induced metric, the metric $D$ also induces the usual Euclidean topology on $\R.$ However, $D$ is not a complete metric because the sequence $x_ = (x_i)_^$ defined by $x_i := i$ is a sequence but it does not converge to any point of $\R.$ As a consequence of not converging, this sequence cannot be a Cauchy sequence in $(\R,, \cdot , )$ (that is, it is not a Cauchy sequence with respect to the norm $, \cdot,$) because if it was then the fact that $(\R,, \cdot , )$ is a Banach space would imply that it converges (a contradiction). for an example). In contrast, a theorem of Klee,The statement of the theorem is: Let $d$ be metric on a vector space $X$ such that the topology $\tau$ induced by $d$ on $X$ makes $(X, \tau)$ into a topological vector space. If $(X, d)$ is a complete metric space then $(X, \tau)$ is a complete topological vector space. which also applies to all metrizable topological vector spaces, implies that if there exists This metric $D$ is assumed to be translation-invariant. So in particular, this metric $D$ does even have to be induced by a norm. complete metric $D$ on $X$ that induces the norm topology $\tau$ on $X,$ then $(X, \, \, )$ is a Banach space.

A Fréchet space is a locally convex topological vector space whose topology is induced by some translation-invariant complete metric.
Every Banach space is a Fréchet space but not conversely; indeed, there even exist Fréchet spaces on which no norm is a continuous function (such as the space of real sequences $\R^ = \prod_ \R$ with the product topology).
However, the topology of every Fréchet space is induced by some countable family of real-valued (necessarily continuous) maps called seminorms, which are generalizations of norms.
It is even possible for a Fréchet space to have a topology that is induced by a countable family of (such norms would necessarily be continuous)A norm (or seminorm) $p$ on a topological vector space $(X, \tau)$ is continuous if and only if the topology $\tau_p$ that $p$ induces on $X$ is coarser than $\tau$ (meaning, $\tau_p \subseteq \tau$), which happens if and only if there exists some open ball $B$ in $(X, p)$ (such as maybe $\$ for example) that is open in $(X, \tau).$
but to not be a Banach/normable space because its topology can not be defined by any norm.
An example of such a space is the Fréchet space $C^(K),$ whose definition can be found in the article on spaces of test functions and distributions.

Complete norms vs complete topological vector spaces

There is another notion of completeness besides metric completeness and that is the notion of a complete topological vector space (TVS) or TVS-completeness, which uses the theory of uniform spaces.
Specifically, the notion of TVS-completeness uses a unique translation-invariant uniformity, called the canonical uniformity, that depends on vector subtraction and the topology $\tau$ that the vector space is endowed with, and so in particular, this notion of TVS completeness is independent of whatever norm induced the topology $\tau$ (and even applies to TVSs that are even metrizable).
Every Banach space is a complete TVS. Moreover, a normed space is a Banach space (that is, its norm-induced metric is complete) if and only if it is complete as a topological vector space.
If $(X, \tau)$ is a metrizable topological vector space (such as any norm induced topology, for example), then $(X, \tau)$ is a complete TVS if and only if it is a complete TVS, meaning that it is enough to check that every Cauchy in $(X, \tau)$ converges in $(X, \tau)$ to some point of $X$ (that is, there is no need to consider the more general notion of arbitrary Cauchy nets).

If $(X, \tau)$ is a topological vector space whose topology is induced by (possibly unknown) norm (such spaces are called ), then $(X, \tau)$ is a complete topological vector space if and only if $X$ may be assigned a norm $\, \,$ that induces on $X$ the topology $\tau$ and also makes $(X, \, \, )$ into a Banach space.
A Hausdorff locally convex topological vector space $X$ is normable if and only if its strong dual space $X'_b$ is normable, in which case $X'_b$ is a Banach space ($X'_b$ denotes the strong dual space of $X,$ whose topology is a generalization of the dual norm-induced topology on the continuous dual space $X'$; see this footnote$X'$ denotes the continuous dual space of $X.$ When $X'$ is endowed with the strong dual space topology, also called the topology of uniform convergence on bounded subsets of $X,$ then this is indicated by writing $X'_b$ (sometimes, the subscript $\beta$ is used instead of $b$). When $X$ is a normed space with norm $\, \,$ then this topology is equal to the topology on $X'$ induced by the dual norm. In this way, the strong topology is a generalization of the usual dual norm-induced topology on $X'.$ for more details).
If $X$ is a metrizable locally convex TVS, then $X$ is normable if and only if $X'_b$ is a Fréchet–Urysohn space.Gabriyelyan, S.S
"On topological spaces and topological groups with certain local countable networks
(2014)
This shows that in the category of locally convex TVSs, Banach spaces are exactly those complete spaces that are both metrizable and have metrizable strong dual spaces.

Completions

Every normed space can be isometrically embedded onto a dense vector subspace of a Banach space, where this Banach space is called a '' completion'' of the normed space. This Hausdorff completion is unique up to isometric isomorphism.

More precisely, for every normed space $X,$ there exists a Banach space $Y$ and a mapping $T : X \to Y$ such that $T$ is an isometric mapping and $T(X)$ is dense in $Y.$ If $Z$ is another Banach space such that there is an isometric isomorphism from $X$ onto a dense subset of $Z,$ then $Z$ is isometrically isomorphic to $Y.$
The Banach space $Y$ is the Hausdorff '' completion'' of the normed space $X.$ The underlying metric space for $Y$ is the same as the metric completion of $X,$ with the vector space operations extended from $X$ to $Y.$ The completion of $X$ is sometimes denoted by $\widehat.$

General theory

Linear operators, isomorphisms

If $X$ and $Y$ are normed spaces over the same ground field $\mathbb,$ the set of all continuous $\mathbb$-linear maps $T : X \to Y$ is denoted by $B(X, Y).$ In infinite-dimensional spaces, not all linear maps are continuous. A linear mapping from a normed space $X$ to another normed space is continuous if and only if it is bounded on the closed unit ball of $X.$ Thus, the vector space $B(X, Y)$ can be given the operator norm
$\, T\, = \sup \.$

For $Y$ a Banach space, the space $B(X, Y)$ is a Banach space with respect to this norm. In categorical contexts, it is sometimes convenient to restrict the function space between two Banach spaces to only the short maps; in that case the space $B(X,Y)$ reappears as a natural bifunctor.

If $X$ is a Banach space, the space $B(X) = B(X, X)$ forms a unital Banach algebra; the multiplication operation is given by the composition of linear maps.

If $X$ and $Y$ are normed spaces, they are isomorphic normed spaces if there exists a linear bijection $T : X \to Y$ such that $T$ and its inverse $T^$ are continuous. If one of the two spaces $X$ or $Y$ is complete (or reflexive, separable, etc.) then so is the other space. Two normed spaces $X$ and $Y$ are ''isometrically isomorphic'' if in addition, $T$ is an isometry, that is, $\, T(x)\, = \, x\,$ for every $x$ in $X.$ The Banach–Mazur distance $d(X, Y)$ between two isomorphic but not isometric spaces $X$ and $Y$ gives a measure of how much the two spaces $X$ and $Y$ differ.

Continuous and bounded linear functions and seminorms

Every continuous linear operator is a bounded linear operator and if dealing only with normed spaces then the converse is also true. That is, a linear operator between two normed spaces is Bounded linear operator, bounded if and only if it is a continuous function. So in particular, because the scalar field (which is $\R$ or $\Complex$) is a normed space, a linear functional on a normed space is a bounded linear functional if and only if it is a continuous linear functional. This allows for continuity-related results (like those below) to be applied to Banach spaces. Although boundedness is the same as continuity for linear maps between normed spaces, the term "bounded" is more commonly used when dealing primarily with Banach spaces.

If $f : X \to \R$ is a subadditive function (such as a norm, a sublinear function, or real linear functional), then $f$ is Continuity at a point, continuous at the origin if and only if $f$ is uniformly continuous on all of $X$; and if in addition $f(0) = 0$ then $f$ is continuous if and only if its absolute value $, f, : X \to [0, \infty)$ is continuous, which happens if and only if $\$ is an open subset of $X.$The fact that $\$ being open implies that $f : X \to \R$ is continuous simplifies proving continuity because this means that it suffices to show that $\$ is open for $r := 1$ and at $x_0 := 0$ (where $f(0) = 0$) rather than showing this for real $r > 0$ and $x_0 \in X.$
And very importantly for applying the Hahn–Banach theorem, a linear functional $f$ is continuous if and only if this is true of its real part $\operatorname f$ and moreover, $\, \operatorname f\, = \, f\,$ and Real and imaginary parts of a linear functional, the real part $\operatorname f$ completely determines $f,$ which is why the Hahn–Banach theorem is often stated only for real linear functionals.
Also, a linear functional $f$ on $X$ is continuous if and only if the seminorm $, f,$ is continuous, which happens if and only if there exists a continuous seminorm $p : X \to \R$ such that $, f, \leq p$; this last statement involving the linear functional $f$ and seminorm $p$ is encountered in many versions of the Hahn–Banach theorem.

Basic notions

The Cartesian product $X \times Y$ of two normed spaces is not canonically equipped with a norm. However, several equivalent norms are commonly used, such as
$\, (x, y)\, _1 = \, x\, + \, y\, , \qquad \, (x, y)\, _\infty = \max(\, x\, , \, y\, )$
which correspond (respectively) to the coproduct and product (category theory), product in the category of Banach spaces and short maps (discussed above). For finite (co)products, these norms give rise to isomorphic normed spaces, and the product $X \times Y$ (or the direct sum $X \oplus Y$) is complete if and only if the two factors are complete.

If $M$ is a closed linear subspace of a normed space $X,$ there is a natural norm on the quotient space $X / M,$
$\, x + M\, = \inf\limits_ \, x + m\, .$

The quotient $X / M$ is a Banach space when $X$ is complete.see pp. 17–19 in . The quotient map from $X$ onto $X / M,$ sending $x \in X$ to its class $x + M,$ is linear, onto, and of norm $1,$ except when $M = X,$ in which case the quotient is the null space.

The closed linear subspace $M$ of $X$ is said to be a ''complemented subspace'' of $X$ if $M$ is the Range of a function, range of a Surjection, surjective bounded linear Projection (linear algebra), projection $P : X \to M.$ In this case, the space $X$ is isomorphic to the direct sum of $M$ and $\ker P,$ the kernel of the projection $P.$

Suppose that $X$ and $Y$ are Banach spaces and that $T \in B(X, Y).$ There exists a canonical factorization of $T$ as
$T = T_1 \circ \pi, \quad T : X \overset X/\ker T \overset Y$
where the first map $\pi$ is the quotient map, and the second map $T_1$ sends every class $x + \ker T$ in the quotient to the image $T(x)$ in $Y.$ This is well defined because all elements in the same class have the same image. The mapping $T_1$ is a linear bijection from $X/\ker T$ onto the range $T(X),$ whose inverse need not be bounded.

Classical spaces

Basic examples of Banach spaces include: the Lp spaces $L^p$ and their special cases, the sequence space (mathematics), sequence spaces $\ell^p$ that consist of scalar sequences indexed by natural numbers $\N$; among them, the space $\ell^1$ of Absolute convergence, absolutely summable sequences and the space $\ell^2$ of square summable sequences; the space $c_0$ of sequences tending to zero and the space $\ell^$ of bounded sequences; the space $C(K)$ of continuous scalar functions on a compact Hausdorff space $K,$ equipped with the max norm,
$\, f\, _ = \max \, \quad f \in C(K).$

According to the Banach–Mazur theorem, every Banach space is isometrically isomorphic to a subspace of some $C(K).$ For every separable Banach space $X,$ there is a closed subspace $M$ of $\ell^1$ such that $X := \ell^1 / M.$

Any Hilbert space serves as an example of a Banach space. A Hilbert space $H$ on $\mathbb = \Reals, \Complex$ is complete for a norm of the form
$\, x\, _H = \sqrt,$
where
$\langle \cdot, \cdot \rangle : H \times H \to \mathbb$
is the Inner product space, inner product, linear in its first argument that satisfies the following:
$\begin \langle y, x \rangle &= \overline, \quad \text x, y \in H \\ \langle x, x \rangle & \geq 0, \quad \text x \in H \\ \langle x,x \rangle = 0 \text x &= 0. \end$

For example, the space $L^2$ is a Hilbert space.

The Hardy spaces, the Sobolev spaces are examples of Banach spaces that are related to $L^p$ spaces and have additional structure. They are important in different branches of analysis, Harmonic analysis and Partial differential equations among others.

Banach algebras

A ''Banach algebra'' is a Banach space $A$ over $\mathbb = \R$ or $\Complex,$ together with a structure of Algebra over a field, algebra over $\mathbb$, such that the product map $A \times A \ni (a, b) \mapsto ab \in A$ is continuous. An equivalent norm on $A$ can be found so that $\, ab\, \leq \, a\, \, b\,$ for all $a, b \in A.$

Examples

* The Banach space $C(K)$ with the pointwise product, is a Banach algebra.
* The disk algebra $A(\mathbf)$ consists of functions Holomorphic function, holomorphic in the open unit disk $D \subseteq \Complex$ and continuous on its Closure (topology), closure: $\overline.$ Equipped with the max norm on $\overline,$ the disk algebra $A(\mathbf)$ is a closed subalgebra of $C\left(\overline\right).$
* The Wiener algebra $A(\mathbf)$ is the algebra of functions on the unit circle $\mathbf$ with absolutely convergent Fourier series. Via the map associating a function on $\mathbf$ to the sequence of its Fourier coefficients, this algebra is isomorphic to the Banach algebra $\ell^1(Z),$ where the product is the Convolution#Discrete convolution, convolution of sequences.
* For every Banach space $X,$ the space $B(X)$ of bounded linear operators on $X,$ with the composition of maps as product, is a Banach algebra.
* A C*-algebra is a complex Banach algebra $A$ with an Antilinear map, antilinear Involution (mathematics), involution $a \mapsto a^*$ such that $\, a^* a\, = \, a\, ^2.$ The space $B(H)$ of bounded linear operators on a Hilbert space $H$ is a fundamental example of C*-algebra. The Gelfand–Naimark theorem states that every C*-algebra is isometrically isomorphic to a C*-subalgebra of some $B(H).$ The space $C(K)$ of complex continuous functions on a compact Hausdorff space $K$ is an example of commutative C*-algebra, where the involution associates to every function $f$ its complex conjugate $\overline.$

Dual space

If $X$ is a normed space and $\mathbb$ the underlying Field (mathematics), field (either the Real number, reals or the complex numbers), the ''continuous dual space'' is the space of continuous linear maps from $X$ into $\mathbb,$ or ''continuous linear functionals''.
The notation for the continuous dual is $X' = B(X, \mathbb)$ in this article.
Since $\mathbb$ is a Banach space (using the absolute value as norm), the dual $X'$ is a Banach space, for every normed space $X.$ The Dixmier–Ng theorem characterizes the dual spaces of Banach spaces.

The main tool for proving the existence of continuous linear functionals is the Hahn–Banach theorem.

In particular, every continuous linear functional on a subspace of a normed space can be continuously extended to the whole space, without increasing the norm of the functional.
An important special case is the following: for every vector $x$ in a normed space $X,$ there exists a continuous linear functional $f$ on $X$ such that
$f(x) = \, x\, _X, \quad \, f\, _ \leq 1.$

When $x$ is not equal to the $\mathbf$ vector, the functional $f$ must have norm one, and is called a ''norming functional'' for $x.$

The Hahn–Banach separation theorem states that two disjoint non-empty convex sets in a real Banach space, one of them open, can be separated by a closed Affine space, affine hyperplane.
The open convex set lies strictly on one side of the hyperplane, the second convex set lies on the other side but may touch the hyperplane.

A subset $S$ in a Banach space $X$ is ''total'' if the linear span of $S$ is dense in $X.$ The subset $S$ is total in $X$ if and only if the only continuous linear functional that vanishes on $S$ is the $\mathbf$ functional: this equivalence follows from the Hahn–Banach theorem.

If $X$ is the direct sum of two closed linear subspaces $M$ and $N,$ then the dual $X'$ of $X$ is isomorphic to the direct sum of the duals of $M$ and $N.$see p. 19 in .
If $M$ is a closed linear subspace in $X,$ one can associate the $M$ in the dual,
$M^ = \.$

The orthogonal $M^$ is a closed linear subspace of the dual. The dual of $M$ is isometrically isomorphic to $X' / M^.$
The dual of $X / M$ is isometrically isomorphic to $M^.$

The dual of a separable Banach space need not be separable, but:

When $X'$ is separable, the above criterion for totality can be used for proving the existence of a countable total subset in $X.$

Weak topologies

The ''weak topology'' on a Banach space $X$ is the Comparison of topologies, coarsest topology on $X$ for which all elements $x'$ in the continuous dual space $X'$ are continuous.
The norm topology is therefore Comparison of topologies, finer than the weak topology.
It follows from the Hahn–Banach separation theorem that the weak topology is Hausdorff, and that a norm-closed Convex set, convex subset of a Banach space is also weakly closed.
A norm-continuous linear map between two Banach spaces $X$ and $Y$ is also ''weakly continuous'', that is, continuous from the weak topology of $X$ to that of $Y.$

If $X$ is infinite-dimensional, there exist linear maps which are not continuous. The space $X^*$ of all linear maps from $X$ to the underlying field $\mathbb$ (this space $X^*$ is called the Dual space#Algebraic dual space, algebraic dual space, to distinguish it from $X'$ also induces a topology on $X$ which is finer topology, finer than the weak topology, and much less used in functional analysis.

On a dual space $X',$ there is a topology weaker than the weak topology of $X',$ called the ''weak topology, weak* topology''.
It is the coarsest topology on $X'$ for which all evaluation maps $x' \in X' \mapsto x'(x),$ where $x$ ranges over $X,$ are continuous.
Its importance comes from the Banach–Alaoglu theorem.

The Banach–Alaoglu theorem can be proved using Tychonoff's theorem about infinite products of compact Hausdorff spaces.
When $X$ is separable, the unit ball $B'$ of the dual is a Metrizable space, metrizable compact in the weak* topology.see Theorem 2.6.23, p. 231 in .

Examples of dual spaces

The dual of $c_0$ is isometrically isomorphic to $\ell^1$: for every bounded linear functional $f$ on $c_0,$ there is a unique element $y = \ \in \ell^1$ such that
$f(x) = \sum_ x_n y_n, \qquad x = \ \in c_0, \ \ \text \ \ \, f\, _ = \, y\, _.$

The dual of $\ell^1$ is isometrically isomorphic to $\ell^$.
The dual of Lp space#Properties of Lp spaces, Lebesgue space $L^p($, 1 is isometrically isomorphic to $L^q($, 1 when $1 \leq p < \infty$ and $\frac + \frac = 1.$

For every vector $y$ in a Hilbert space $H,$ the mapping
$x \in H \to f_y(x) = \langle x, y \rangle$

defines a continuous linear functional $f_y$ on $H.$The Riesz representation theorem states that every continuous linear functional on $H$ is of the form $f_y$ for a uniquely defined vector $y$ in $H.$
The mapping $y \in H \to f_y$ is an Antilinear map, antilinear isometric bijection from $H$ onto its dual $H'.$
When the scalars are real, this map is an isometric isomorphism.

When $K$ is a compact Hausdorff topological space, the dual $M(K)$ of $C(K)$ is the space of Radon measures in the sense of Bourbaki.
The subset $P(K)$ of $M(K)$ consisting of non-negative measures of mass 1 (probability measures) is a convex w*-closed subset of the unit ball of $M(K).$
The extreme points of $P(K)$ are the Dirac measures on $K.$
The set of Dirac measures on $K,$ equipped with the w*-topology, is homeomorphic to $K.$

The result has been extended by Amir and Cambern to the case when the multiplicative Banach–Mazur compactum, Banach–Mazur distance between $C(K)$ and $C(L)$ is $< 2.$
The theorem is no longer true when the distance is $= 2.$

In the commutative Banach algebra $C(K),$ the Banach algebra#Ideals and characters, maximal ideals are precisely kernels of Dirac measures on $K,$
$I_x = \ker \delta_x = \, \quad x \in K.$

More generally, by the Gelfand–Mazur theorem, the maximal ideals of a unital commutative Banach algebra can be identified with its Banach algebra#Ideals and characters, characters—not merely as sets but as topological spaces: the former with the hull-kernel topology and the latter with the w*-topology.
In this identification, the maximal ideal space can be viewed as a w*-compact subset of the unit ball in the dual $A'.$

Not every unital commutative Banach algebra is of the form $C(K)$ for some compact Hausdorff space $K.$ However, this statement holds if one places $C(K)$ in the smaller category of commutative C*-algebras.
Israel Gelfand, Gelfand's Gelfand representation, representation theorem for commutative C*-algebras states that every commutative unital ''C''*-algebra $A$ is isometrically isomorphic to a $C(K)$ space.
The Hausdorff compact space $K$ here is again the maximal ideal space, also called the Spectrum of a C*-algebra#Examples, spectrum of $A$ in the C*-algebra context.

Bidual

If $X$ is a normed space, the (continuous) dual $X''$ of the dual $X'$ is called the or of $X.$
For every normed space $X,$ there is a natural map,
$\sup_ \, x_i\, \leq \, x''\, , \ \ x''(f) = \lim_i f(x_i), \quad f \in X'.$

The net may be replaced by a weakly*-convergent sequence when the dual $X'$ is separable.
On the other hand, elements of the bidual of $\ell^1$ that are not in $\ell^1$ cannot be weak*-limit of in $\ell^1,$ since $\ell^1$ is #Weak convergences of sequences, weakly sequentially complete.

Banach's theorems

Here are the main general results about Banach spaces that go back to the time of Banach's book () and are related to the Baire category theorem.
According to this theorem, a complete metric space (such as a Banach space, a Fréchet space or an F-space) cannot be equal to a union of countably many closed subsets with empty Interior (topology), interiors.
Therefore, a Banach space cannot be the union of countably many closed subspaces, unless it is already equal to one of them; a Banach space with a countable Hamel basis is finite-dimensional.

The Banach–Steinhaus theorem is not limited to Banach spaces.
It can be extended for example to the case where $X$ is a Fréchet space, provided the conclusion is modified as follows: under the same hypothesis, there exists a neighborhood $U$ of $\mathbf$ in $X$ such that all $T$ in $F$ are uniformly bounded on $U,$
$\sup_ \sup_ \; \, T(x)\, _Y < \infty.$

This result is a direct consequence of the preceding ''Banach isomorphism theorem'' and of the canonical factorization of bounded linear maps.

This is another consequence of Banach's isomorphism theorem, applied to the continuous bijection from $M_1 \oplus \cdots \oplus M_n$ onto $X$ sending $m_1, \cdots, m_n$ to the sum $m_1 + \cdots + m_n.$

Reflexivity

The normed space $X$ is called '' reflexive'' when the natural map
$\begin F_X : X \to X'' \\ F_X(x) (f) = f(x) & \text x \in X, \text f \in X'\end$
is surjective. Reflexive normed spaces are Banach spaces.

This is a consequence of the Hahn–Banach theorem.
Further, by the open mapping theorem, if there is a bounded linear operator from the Banach space $X$ onto the Banach space $Y,$ then $Y$ is reflexive.

Indeed, if the dual $Y'$ of a Banach space $Y$ is separable, then $Y$ is separable.
If $X$ is reflexive and separable, then the dual of $X'$ is separable, so $X'$ is separable.

Hilbert spaces are reflexive. The $L^p$ spaces are reflexive when $1 < p < \infty.$ More generally, uniformly convex spaces are reflexive, by the Milman–Pettis theorem.
The spaces $c_0, \ell^1, L^1($, 1, C(, 1 are not reflexive.
In these examples of non-reflexive spaces $X,$ the bidual $X''$ is "much larger" than $X.$
Namely, under the natural isometric embedding of $X$ into $X''$ given by the Hahn–Banach theorem, the quotient $X'' / X$ is infinite-dimensional, and even nonseparable.
However, Robert C. James has constructed an example of a non-reflexive space, usually called "''the James space''" and denoted by $J,$ such that the quotient $J'' / J$ is one-dimensional.
Furthermore, this space $J$ is isometrically isomorphic to its bidual.

When $X$ is reflexive, it follows that all closed and bounded Convex set, convex subsets of $X$ are weakly compact.
In a Hilbert space $H,$ the weak compactness of the unit ball is very often used in the following way: every bounded sequence in $H$ has weakly convergent subsequences.

Weak compactness of the unit ball provides a tool for finding solutions in reflexive spaces to certain Infinite-dimensional optimization, optimization problems.
For example, every Convex function, convex continuous function on the unit ball $B$ of a reflexive space attains its minimum at some point in $B.$

As a special case of the preceding result, when $X$ is a reflexive space over $\R,$ every continuous linear functional $f$ in $X'$ attains its maximum $\, f\,$ on the unit ball of $X.$
The following James' theorem, theorem of Robert C. James provides a converse statement.

The theorem can be extended to give a characterization of weakly compact convex sets.

On every non-reflexive Banach space $X,$ there exist continuous linear functionals that are not ''norm-attaining''.
However, the Errett Bishop, Bishop–Robert Phelps, Phelps theorem states that norm-attaining functionals are norm dense in the dual $X'$ of $X.$

Weak convergences of sequences

A sequence $\$ in a Banach space $X$ is ''weakly convergent'' to a vector $x \in X$ if $\$ converges to $f(x)$ for every continuous linear functional $f$ in the dual $X'.$ The sequence $\$ is a ''weakly Cauchy sequence'' if $\$ converges to a scalar limit $L(f)$ for every $f$ in $X'.$
A sequence $\$ in the dual $X'$ is ''weakly* convergent'' to a functional $f \in X'$ if $f_n(x)$ converges to $f(x)$ for every $x$ in $X.$
Weakly Cauchy sequences, weakly convergent and weakly* convergent sequences are norm bounded, as a consequence of the Uniform boundedness principle, Banach–Steinhaus theorem.

When the sequence $\$ in $X$ is a weakly Cauchy sequence, the limit $L$ above defines a bounded linear functional on the dual $X',$ that is, an element $L$ of the bidual of $X,$ and $L$ is the limit of $\$ in the weak*-topology of the bidual.
The Banach space $X$ is ''weakly sequentially complete'' if every weakly Cauchy sequence is weakly convergent in $X.$
It follows from the preceding discussion that reflexive spaces are weakly sequentially complete.

An orthonormal sequence in a Hilbert space is a simple example of a weakly convergent sequence, with limit equal to the $\mathbf$ vector.
The Schauder basis#Examples, unit vector basis of $\ell^p$ for $1 < p < \infty,$ or of $c_0,$ is another example of a ''weakly null sequence'', that is, a sequence that converges weakly to $\mathbf.$
For every weakly null sequence in a Banach space, there exists a sequence of convex combinations of vectors from the given sequence that is norm-converging to $\mathbf.$

The unit vector basis of $\ell^1$ is not weakly Cauchy.
Weakly Cauchy sequences in $\ell^1$ are weakly convergent, since $L^1$-spaces are weakly sequentially complete.
Actually, weakly convergent sequences in $\ell^1$ are norm convergent. This means that $\ell^1$ satisfies Schur's property.

Results involving the basis

Weakly Cauchy sequences and the $\ell^1$ basis are the opposite cases of the dichotomy established in the following deep result of H. P. Rosenthal.

A complement to this result is due to Odell and Rosenthal (1975).

By the Goldstine theorem, every element of the unit ball $B''$ of $X''$ is weak*-limit of a net in the unit ball of $X.$ When $X$ does not contain $\ell^1,$ every element of $B''$ is weak*-limit of a in the unit ball of $X.$

When the Banach space $X$ is separable, the unit ball of the dual $X',$ equipped with the weak*-topology, is a metrizable compact space $K,$ and every element $x''$ in the bidual $X''$ defines a bounded function on $K$:
$x' \in K \mapsto x''(x'), \quad , x''(x'), \leq \, x''\, .$

This function is continuous for the compact topology of $K$ if and only if $x''$ is actually in $X,$ considered as subset of $X''.$
Assume in addition for the rest of the paragraph that $X$ does not contain $\ell^1.$
By the preceding result of Odell and Rosenthal, the function $x''$ is the Pointwise convergence, pointwise limit on $K$ of a sequence $\ \subseteq X$ of continuous functions on $K,$ it is therefore a Baire function, first Baire class function on $K.$
The unit ball of the bidual is a pointwise compact subset of the first Baire class on $K.$

Sequences, weak and weak* compactness

When $X$ is separable, the unit ball of the dual is weak*-compact by the Banach–Alaoglu theorem and metrizable for the weak* topology, hence every bounded sequence in the dual has weakly* convergent subsequences.
This applies to separable reflexive spaces, but more is true in this case, as stated below.

The weak topology of a Banach space $X$ is metrizable if and only if $X$ is finite-dimensional. If the dual $X'$ is separable, the weak topology of the unit ball of $X$ is metrizable.
This applies in particular to separable reflexive Banach spaces.
Although the weak topology of the unit ball is not metrizable in general, one can characterize weak compactness using sequences.

A Banach space $X$ is reflexive if and only if each bounded sequence in $X$ has a weakly convergent subsequence.

A weakly compact subset $A$ in $\ell^1$ is norm-compact. Indeed, every sequence in $A$ has weakly convergent subsequences by Eberlein–Šmulian, that are norm convergent by the Schur property of $\ell^1.$

Type and cotype

A way to classify Banach spaces is through the probabilistic notion of Type and cotype of a Banach space, type and cotype, these two measure how far a Banach space is from a Hilbert space.

Schauder bases

A ''Schauder basis'' in a Banach space $X$ is a sequence $\_$ of vectors in $X$ with the property that for every vector $x \in X,$ there exist defined scalars $\_$ depending on $x,$ such that
$x = \sum_^ x_n e_n, \quad \textit \quad x = \lim_n P_n(x), \ P_n(x) := \sum_^n x_k e_k.$

Banach spaces with a Schauder basis are necessarily separable, because the countable set of finite linear combinations with rational coefficients (say) is dense.

It follows from the Banach–Steinhaus theorem that the linear mappings $\$ are uniformly bounded by some constant $C.$
Let $\$ denote the coordinate functionals which assign to every $x$ in $X$ the coordinate $x_n$ of $x$ in the above expansion.
They are called ''biorthogonal functionals''. When the basis vectors have norm $1,$ the coordinate functionals $\$ have norm $\leq 2 C$ in the dual of $X.$

Most classical separable spaces have explicit bases.
The Haar wavelet, Haar system $\$ is a basis for $L^p($, 1 when $1 \leq p < \infty.$
The Schauder basis#Examples, trigonometric system is a basis in $L^p(\mathbf)$ when $1 < p < \infty.$
The Haar wavelet#Haar system on the unit interval and related systems, Schauder system is a basis in the space $C($, 1.
The question of whether the disk algebra $A(\mathbf)$ has a basis remained open for more than forty years, until Bočkarev showed in 1974 that $A(\mathbf)$ admits a basis constructed from the Haar wavelet#Haar system on the unit interval and related systems, Franklin system.

Since every vector $x$ in a Banach space $X$ with a basis is the limit of $P_n(x),$ with $P_n$ of finite rank and uniformly bounded, the space $X$ satisfies the Approximation property, bounded approximation property.
The first example by Per Enflo, Enflo of a space failing the approximation property was at the same time the first example of a separable Banach space without a Schauder basis.

Robert C. James characterized reflexivity in Banach spaces with a basis: the space $X$ with a Schauder basis is reflexive if and only if the basis is both Schauder basis#Schauder bases and duality, shrinking and boundedly complete.
In this case, the biorthogonal functionals form a basis of the dual of $X.$

Tensor product

Let $X$ and $Y$ be two $\mathbb$-vector spaces. The tensor product $X \otimes Y$ of $X$ and $Y$ is a $\mathbb$-vector space $Z$ with a bilinear mapping $T : X \times Y \to Z$ which has the following universal property:

:If $T_1 : X \times Y \to Z_1$ is any bilinear mapping into a $\mathbb$-vector space $Z_1,$ then there exists a unique linear mapping $f : Z \to Z_1$ such that $T_1 = f \circ T.$

The image under $T$ of a couple $(x, y)$ in $X \times Y$ is denoted by $x \otimes y,$ and called a ''simple tensor''.
Every element $z$ in $X \otimes Y$ is a finite sum of such simple tensors.

There are various norms that can be placed on the tensor product of the underlying vector spaces, amongst others the Topological tensor product#Cross norms and tensor products of Banach spaces, projective cross norm and Topological tensor product#Cross norms and tensor products of Banach spaces, injective cross norm introduced by Alexander Grothendieck, A. Grothendieck in 1955.

In general, the tensor product of complete spaces is not complete again. When working with Banach spaces, it is customary to say that the ''projective tensor product'' of two Banach spaces $X$ and $Y$ is the $X \widehat_\pi Y$ of the algebraic tensor product $X \otimes Y$ equipped with the projective tensor norm, and similarly for the ''injective tensor product'' $X \widehat_\varepsilon Y.$
Grothendieck proved in particular that

$\begin C(K) \widehat_\varepsilon Y &\simeq C(K, Y), \\ L^1($, 1 \widehat_\pi Y &\simeq L^1([0, 1], Y),
\end
where $K$ is a compact Hausdorff space, $C(K, Y)$ the Banach space of continuous functions from $K$ to $Y$ and $L^1([0, 1], Y)$ the space of Bochner-measurable and integrable functions from $[0, 1]$ to $Y,$ and where the isomorphisms are isometric.
The two isomorphisms above are the respective extensions of the map sending the tensor $f \otimes y$ to the vector-valued function $s \in K \to f(s) y \in Y.$

Tensor products and the approximation property

Let $X$ be a Banach space. The tensor product $X' \widehat \otimes_\varepsilon X$ is identified isometrically with the closure in $B(X)$ of the set of finite rank operators.
When $X$ has the approximation property, this closure coincides with the space of compact operators on $X.$

For every Banach space $Y,$ there is a natural norm $1$ linear map
$Y \widehat\otimes_\pi X \to Y \widehat\otimes_\varepsilon X$
obtained by extending the identity map of the algebraic tensor product. Grothendieck related the Approximation property, approximation problem to the question of whether this map is one-to-one when $Y$ is the dual of $X.$
Precisely, for every Banach space $X,$ the map
$X' \widehat \otimes_\pi X \ \longrightarrow X' \widehat \otimes_\varepsilon X$
is one-to-one if and only if $X$ has the approximation property.

Grothendieck conjectured that $X \widehat_\pi Y$ and $X \widehat_\varepsilon Y$ must be different whenever $X$ and $Y$ are infinite-dimensional Banach spaces.
This was disproved by Gilles Pisier in 1983.
Pisier constructed an infinite-dimensional Banach space $X$ such that $X \widehat_\pi X$ and $X \widehat_\varepsilon X$ are equal. Furthermore, just as Per Enflo, Enflo's example, this space $X$ is a "hand-made" space that fails to have the approximation property. On the other hand, Szankowski proved that the classical space $B(\ell^2)$ does not have the approximation property.

Some classification results

Characterizations of Hilbert space among Banach spaces

A necessary and sufficient condition for the norm of a Banach space $X$ to be associated to an inner product is the parallelogram identity:

It follows, for example, that the Lp space, Lebesgue space $L^p($, 1 is a Hilbert space only when $p = 2.$
If this identity is satisfied, the associated inner product is given by the polarization identity. In the case of real scalars, this gives:
$\langle x, y\rangle = \tfrac(\, x+y\, ^2 - \, x-y\, ^2).$

For complex scalars, defining the Inner product space, inner product so as to be $\Complex$-linear in $x,$ Antilinear map, antilinear in $y,$ the polarization identity gives:
$\langle x,y\rangle = \tfrac\left(\, x+y\, ^2 - \, x-y\, ^2 + i(\, x+iy\, ^2 - \, x-iy\, ^2)\right).$

To see that the parallelogram law is sufficient, one observes in the real case that $\langle x, y \rangle$ is symmetric, and in the complex case, that it satisfies the Hermitian symmetry property and $\langle i x, y \rangle = i \langle x, y \rangle.$ The parallelogram law implies that $\langle x, y \rangle$ is additive in $x.$
It follows that it is linear over the rationals, thus linear by continuity.

Several characterizations of spaces isomorphic (rather than isometric) to Hilbert spaces are available.
The parallelogram law can be extended to more than two vectors, and weakened by the introduction of a two-sided inequality with a constant $c \geq 1$: Kwapień proved that if
$c^ \sum_^n \, x_k\, ^2 \leq \operatorname_ \left\, \sum_^n \pm x_k\right\, ^2 \leq c^2 \sum_^n \, x_k\, ^2$
for every integer $n$ and all families of vectors $\ \subseteq X,$ then the Banach space $X$ is isomorphic to a Hilbert space.
Here, $\operatorname_$ denotes the average over the $2^n$ possible choices of signs $\pm 1.$
In the same article, Kwapień proved that the validity of a Banach-valued Parseval's theorem for the Fourier transform characterizes Banach spaces isomorphic to Hilbert spaces.

Lindenstrauss and Tzafriri proved that a Banach space in which every closed linear subspace is complemented (that is, is the range of a bounded linear projection) is isomorphic to a Hilbert space. The proof rests upon Dvoretzky's theorem about Euclidean sections of high-dimensional centrally symmetric convex bodies. In other words, Dvoretzky's theorem states that for every integer $n,$ any finite-dimensional normed space, with dimension sufficiently large compared to $n,$ contains subspaces nearly isometric to the $n$-dimensional Euclidean space.

The next result gives the solution of the so-called . An infinite-dimensional Banach space $X$ is said to be ''homogeneous'' if it is isomorphic to all its infinite-dimensional closed subspaces. A Banach space isomorphic to $\ell^2$ is homogeneous, and Banach asked for the converse.

An infinite-dimensional Banach space is ''hereditarily indecomposable'' when no subspace of it can be isomorphic to the direct sum of two infinite-dimensional Banach spaces.
The Timothy Gowers, Gowers dichotomy theorem asserts that every infinite-dimensional Banach space $X$ contains, either a subspace $Y$ with Schauder basis#Unconditionality, unconditional basis, or a hereditarily indecomposable subspace $Z,$ and in particular, $Z$ is not isomorphic to its closed hyperplanes.
If $X$ is homogeneous, it must therefore have an unconditional basis. It follows then from the partial solution obtained by Komorowski and Nicole Tomczak-Jaegermann, Tomczak–Jaegermann, for spaces with an unconditional basis, that $X$ is isomorphic to $\ell^2.$

Metric classification

If $T : X \to Y$ is an isometry from the Banach space $X$ onto the Banach space $Y$ (where both $X$ and $Y$ are vector spaces over $\R$), then the Mazur–Ulam theorem states that $T$ must be an affine transformation.
In particular, if $T(0_X) = 0_Y,$ this is $T$ maps the zero of $X$ to the zero of $Y,$ then $T$ must be linear. This result implies that the metric in Banach spaces, and more generally in normed spaces, completely captures their linear structure.

Topological classification

Finite dimensional Banach spaces are homeomorphic as topological spaces, if and only if they have the same dimension as real vector spaces.

Anderson–Kadec theorem (1965–66) proves that any two infinite-dimensional separable space, separable Banach spaces are homeomorphic as topological spaces. Kadec's theorem was extended by Torunczyk, who proved that any two Banach spaces are homeomorphic if and only if they have the same Set-theoretic topology#Cardinal functions, density character, the minimum cardinality of a dense subset.

Spaces of continuous functions

When two compact Hausdorff spaces $K_1$ and $K_2$ are homeomorphic, the Banach spaces $C(K_1)$ and $C(K_2)$ are isometric. Conversely, when $K_1$ is not homeomorphic to $K_2,$ the (multiplicative) Banach–Mazur distance between $C(K_1)$ and $C(K_2)$ must be greater than or equal to $2,$ see above the #Examples of dual spaces, results by Amir and Cambern.
Although uncountable compact metric spaces can have different homeomorphy types, one has the following result due to Milutin:

The situation is different for Countable set, countably infinite compact Hausdorff spaces.
Every countably infinite compact $K$ is homeomorphic to some closed interval of ordinal numbers
$\langle 1, \alpha \rangle = \$
equipped with the order topology, where $\alpha$ is a countably infinite ordinal.
The Banach space $C(K)$ is then isometric to . When $\alpha, \beta$ are two countably infinite ordinals, and assuming $\alpha \leq \beta,$ the spaces and are isomorphic if and only if .Bessaga, Czesław; Pełczyński, Aleksander (1960), "Spaces of continuous functions. IV. On isomorphical classification of spaces of continuous functions", Studia Math. 19:53–62.
For example, the Banach spaces
$C(\langle 1, \omega\rangle), \ C(\langle 1, \omega^ \rangle), \ C(\langle 1, \omega^\rangle), \ C(\langle 1, \omega^ \rangle), \cdots, C(\langle 1, \omega^ \rangle), \cdots$
are mutually non-isomorphic.

Examples

Derivatives

Several concepts of a derivative may be defined on a Banach space. See the articles on the Fréchet derivative and the Gateaux derivative for details.
The Fréchet derivative allows for an extension of the concept of a total derivative to Banach spaces. The Gateaux derivative allows for an extension of a directional derivative to locally convex topological vector spaces.
Fréchet differentiability is a stronger condition than Gateaux differentiability.
The quasi-derivative is another generalization of directional derivative that implies a stronger condition than Gateaux differentiability, but a weaker condition than Fréchet differentiability.

Generalizations

Several important spaces in functional analysis, for instance the space of all infinitely often differentiable functions $\R \to \R,$ or the space of all Distribution (mathematics), distributions on $\R,$ are complete but are not normed vector spaces and hence not Banach spaces.
In Fréchet spaces one still has a complete Metric space, metric, while LF-spaces are complete Uniform space, uniform vector spaces arising as limits of Fréchet spaces.

See also

*
**
**
**
**
**
**
**
*
*
**
*
*
*
*
*
*
*

Notes

References

Bibliography

*
*
*
*
* .*
* .
* .
*
* .
*
*
*
*
*
* .
* .
*
*
*
* .
*
*
*
*
* .

External links

*
*

{{Authority control

Banach spaces,
category:Functional analysis
Normed spaces,
Science and technology in Poland
Topological vector spaces