|
Trench Shoring
Trench shoring is the process of bracing the walls of a trench to prevent collapse and cave-ins. The phrase can also be used as a noun to refer to the materials used in the process. Several methods can be used to shore up a trench. Hydraulic shoring is the use of hydraulic pistons that can be pumped outward until they press up against the trench walls. This is typically combined with steel plate or a special heavy plywood called Finform. Another method is called beam and plate, in which steel I-beams are driven into the ground and steel plates are slid in amongst them. A similar method that uses wood planks is called soldier boarding. Hydraulics tend to be faster and easier; the other methods tend to be used for longer term applications or larger excavations. Shoring should not be confused with shielding by means of trench shields. Shoring is designed to prevent collapse, whilst shielding is only designed to protect workers should collapse occur. Most professionals agr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sbh S600
{{disambig ...
SBH can refer to: * Stellar black hole or Supermassive black hole * Gustaf III Airport, Saint Barthélemy, IATA code * Sephardic Bikur Holim, a charity organisation * Sequencing by hybridization, DNA sequencing method * The Service Book and Hymnal of Lutheran churches * Singapore Badminton Hall * State Bank of Hyderabad State Bank of Hyderabad (SBH) was a regional bank India, with its headquarters at Gunfoundry, Abids, Hyderabad, Telangana. Founded by the 7th Nizam of Hyderabad State, Mir Osman Ali Khan, it is now one of the five associate banks of State Bank ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Trench
A trench is a type of digging, excavation or depression in the ground that is generally deeper than it is wide (as opposed to a swale (landform), swale or a bar ditch), and narrow compared with its length (as opposed to a simple hole or trapping pit, pit). In geology, trenches result from erosion by rivers or by geological movement of tectonic plates. In civil engineering, trenches are often created to install underground utilities such as Pipeline transport, gas, Water distribution system, water, Underground power lines, power and Undergrounding, communication lines. In construction, trenches are dug for foundations of buildings, retaining walls and dams, and for Tunnel construction#Cut-and-cover, cut-and-cover construction of tunnels. In archaeology, the "trench method" is used for searching and Excavation (archaeology), excavating ancient ruins or to dig into stratum, strata of sedimented material. In geotechnical engineering, trench investigations locate faults and investigat ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cave-in (excavation)
Digging, also referred to as excavation, is the process of using some implement such as claws, hands, manual tools or heavy equipment, to remove material from a solid surface, usually soil, sand or rock on the surface of Earth. Digging is actually the combination of two processes, the first being the breaking or cutting of the surface, and the second being the removal and relocation of the material found there.Carl Dreher,The Right Way to Dig, ''Popular Science'' (March 1957), p. 179. In a simple digging situation, this may be accomplished in a single motion, with the digging implement being used to break the surface and immediately fling the material away from the hole or other structure being dug. Many kinds of animals engage in digging, either as part of burrowing behavior or to search for food or water under the surface of the ground.Zen Faulkes,Morphological Adaptations for Digging and Burrowing (2013), p. 276-295. Historically, humans have engaged in digging for both of the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hydraulic Piston
Hydraulics () is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids. At a very basic level, hydraulics is the liquid counterpart of pneumatics, which concerns gases. Fluid mechanics provides the theoretical foundation for hydraulics, which focuses on applied engineering using the properties of fluids. In its fluid power applications, hydraulics is used for the generation, control, and transmission of power by the use of pressurized liquids. Hydraulic topics range through some parts of science and most of engineering modules, and they cover concepts such as pipe flow, dam design, fluidics, and fluid control circuitry. The principles of hydraulics are in use naturally in the human body within the vascular system and erectile tissue. ''Free surface hydraulics'' is the branch of hydraulics dealing with free surface flow, such as occurring in rivers, canals, lakes, estuaries, and seas. Its sub-fi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Plywood
Plywood is a composite material manufactured from thin layers, or "plies", of wood veneer that have been stacked and glued together. It is an engineered wood from the family of manufactured boards, which include plywood, medium-density fibreboard (MDF), oriented strand board (OSB), and particle board (or chipboard). All plywoods bind resin and wood fibre sheets (cellulose cells are long, strong and thin) to form a composite material. The sheets of wood are stacked such that each layer has its grain set typically (see below) perpendicular to its adjacent layers. This alternation of the grain is called ''cross-graining'' and has several important benefits: it reduces the tendency of wood to split when nailed at the edges; it reduces thickness swelling and shrinkage, providing improved dimensional stability; and it makes the strength of the panel consistent across all directions. There is usually an odd number of plies, so that the sheet is balanced, that is, the surface layers ha ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Steel
Steel is an alloy of iron and carbon that demonstrates improved mechanical properties compared to the pure form of iron. Due to steel's high Young's modulus, elastic modulus, Yield (engineering), yield strength, Fracture, fracture strength and low raw material cost, steel is one of the most commonly manufactured materials in the world. Steel is used in structures (as concrete Rebar, reinforcing rods), in Bridge, bridges, infrastructure, Tool, tools, Ship, ships, Train, trains, Car, cars, Bicycle, bicycles, Machine, machines, Home appliance, electrical appliances, furniture, and Weapon, weapons. Iron is always the main element in steel, but other elements are used to produce various grades of steel demonstrating altered material, mechanical, and microstructural properties. Stainless steels, for example, typically contain 18% chromium and exhibit improved corrosion and Redox, oxidation resistance versus its carbon steel counterpart. Under atmospheric pressures, steels generally ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
I-beam
An I-beam is any of various structural members with an - (serif capital letter 'I') or H-shaped cross section (geometry), cross-section. Technical terms for similar items include H-beam, I-profile, universal column (UC), w-beam (for "wide flange"), universal beam (UB), rolled steel joist (RSJ), or double-T (especially in Polish language, Polish, Bulgarian language, Bulgarian, Spanish language, Spanish, Italian language, Italian, and German language, German). I-beams are typically made of structural steel and serve a wide variety of construction uses. The horizontal elements of the are called flanges, and the vertical element is known as the "web". The web resists shear forces, while the flanges resist most of the bending moment experienced by the beam. The Euler–Bernoulli beam equation shows that the -shaped section is a very efficient form for carrying both bending and shearing (physics), shear loads in the plane of the web. On the other hand, the cross-section has a reduced ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Trench Shield
Trench shields (also called trench boxes or trench sheets) are steel or aluminum structures used to avoid Cave-in (excavation), cave-ins and protect Public utility, utility workers while performing their duties within a trench. They are customarily constructed with sidewalls of varying thicknesses held apart by steel or aluminum spreaders. Spreaders can be interchanged to match the width of the trench. The different materials and building designs lead to a variety of depth ratings: the depth of a trench that the shield can withstand a collapse without buckling. Depth ratings are determined by registered professional engineers. A shield should not be confused with a shore. While they may serve a similar function, trench shoring is a different physical application that holds up the walls of a trench to prevent collapse. In the US, use of a trench shield is governed by Occupational Safety and Health Administration, OSHA 29 CFR Part 1926.650-.652 Subpart P-Excavations. Externa ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Retaining Wall
Retaining walls are relatively rigid walls used for supporting soil laterally so that it can be retained at different levels on the two sides. Retaining walls are structures designed to restrain soil to a slope that it would not naturally keep to (typically a steep, near-vertical or vertical slope). They are used to bound soils between two different elevations often in areas of inconveniently steep terrain in areas where the landscape needs to be shaped severely and engineered for more specific purposes like hillside farming or roadway overpasses. A retaining wall that retains soil on the backside and water on the frontside is called a seawall or a bulkhead. Definition A retaining wall is designed to hold in place a mass of earth or the like, such as the edge of a terrace or excavation. The structure is constructed to resist the lateral pressure of soil when there is a desired change in ground elevation that exceeds the angle of repose of the soil. A basement wall is thus one k ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Geotechnical Shoring Structures
Earthworks are engineering works created through the processing of parts of the earth's surface involving quantities of soil or unformed rock. Shoring structures An incomplete list of possible temporary or permanent geotechnical shoring structures that may be designed and utilised as part of earthworks: * Mechanically stabilized earth * Earth anchor * Cliff stabilization * Grout curtain *Retaining wall *Slurry wall * Soil nailing * Tieback (geotechnical) * Trench shoring * Caisson *Dam * Gabion *Ground freezing Gallery File:Mechanically stabilized earth diagram.gif, Mechanically stabilized earth File:GroutCurtain.gif, Grout curtain File:Retaining Wall Type Function.jpg, Retaining wall types File:Soil Nail.jpg, Soil nailing File:FEMA - 6044 - Photograph by Larry Lerner taken on 03-15-2002 in New York.jpg, Tieback File:Sbh s600.JPG, Trench shoring File:Caisson Schematic.svg, Caisson File:Vyrnwy dam.JPG, Dam File:Gabion 040.jpg, Gabions File:Cross section of a ground free ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
