|
Sculler
Sculling is the use of oars to propel a boat by moving them through the water on both sides of the craft, or moving one oar over the stern. A long, narrow boat with sliding seats, rigged with two oars per rower may be referred to as a scull, its oars may be referred to as sculls and a person rowing it referred to as sculler. Sculling is distinguished from sweep rowing, whereby each boat crew member employs an oar, complemented by another crew member on the opposite side with an oar, usually with each pulling it with two hands and from stern sculling, which uses an oar to propel a vessel with side-to-side movements from the stern. Overview Sculling is a form of rowing in which a boat is propelled by one or more rowers, each of whom operates two oars, one held in the fingers and upper palm of each hand. This contrasts with the other common method of rowing, sweep rowing, in which each rower may use both hands to operate a single oar on either the port or starboard side of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Glossary Of Rowing Terms
In competitive rowing, the following specialized terms are important in the corresponding aspects of the sport: Boat classes In competitive rowing events, abbreviations are used for different boat classes. ;Weight: *L, LWT or Lt: Lightweight rowing *If not present the crew is open weight ;Age: *J: Junior(Under 19 years of age) *B: Senior B (Under 23 years of age) *Masters: over 27, includes a letter designation for the average age of the crew: **A – 27 years of age and older **B – 36 years of age and older **C – 43 years of age and older **D – 50 years of age and older **E – 55 years of age and older **F – 60 years of age and older **G – 65 years of age and older **H – 70 years of age and older **I – 75 years of age and older **J – 80 years of age and older *If none of these abbreviations are present the crew is Senior A *These age categories are effectively common to both FISA (Bye-Law to Rule 27) and USRowing (Rule 4–104) rules. USRowing also designate ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Catch A Crab
In competitive rowing, the following specialized terms are important in the corresponding aspects of the sport: Boat classes In competitive rowing events, abbreviations are used for different boat classes. ;Weight: *L, LWT or Lt: Lightweight rowing *If not present the crew is open weight ;Age: *J: Junior(Under 19 years of age) *B: Senior B (Under 23 years of age) *Masters: over 27, includes a letter designation for the average age of the crew: **A – 27 years of age and older **B – 36 years of age and older **C – 43 years of age and older **D – 50 years of age and older **E – 55 years of age and older **F – 60 years of age and older **G – 65 years of age and older **H – 70 years of age and older **I – 75 years of age and older **J – 80 years of age and older *If none of these abbreviations are present the crew is Senior A *These age categories are effectively common to both FISA (Bye-Law to Rule 27) and USRowing (Rule 4–104) rules. USRowing also designat ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Anatomy Of A Rowing Stroke
In rowing, the stroke is the action of moving the oar through the water in order to propel the boat forward. The two fundamental reference points in the stroke are the ''catch'' where the oar blade is placed in the water, and the ''extraction'' (also known as the 'finish', 'release' or 'tapping down') where the oar blade is removed from the water. After the blade is placed in the water at the ''catch'', the rower applies pressure to the oar levering the boat forward which is called the ''drive'' phase of the stroke. Once the rower extracts the oar from the water, the ''recovery'' phase begins, setting up the rower's body for the next stroke.; when the oars are out of the water, and the preparation for the catch occurs Stages of a stroke Drive The drive is the phase from the catch to the extraction. *As soon as the oar blade is placed in the water at the catch, the rower begins to lever the boat past the blade by straightening the legs while the body remains leaned forward and the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Anatomy Of A Stroke
In rowing, the stroke is the action of moving the oar through the water in order to propel the boat forward. The two fundamental reference points in the stroke are the ''catch'' where the oar blade is placed in the water, and the ''extraction'' (also known as the 'finish', 'release' or 'tapping down') where the oar blade is removed from the water. After the blade is placed in the water at the ''catch'', the rower applies pressure to the oar levering the boat forward which is called the ''drive'' phase of the stroke. Once the rower extracts the oar from the water, the ''recovery'' phase begins, setting up the rower's body for the next stroke.; when the oars are out of the water, and the preparation for the catch occurs Stages of a stroke Drive The drive is the phase from the catch to the extraction. *As soon as the oar blade is placed in the water at the catch, the rower begins to lever the boat past the blade by straightening the legs while the body remains leaned forward and ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Stern Sculling
Stern sculling is the use of a single oar over the stern of a boat to propel it with side-to-side motions that create forward lift in the water. It is distinguished from sculling, which is rowing with two oars on either side of the boat and from sweep rowing, whereby each boat crew member employs a single oar, complemented by another crew member on the opposite side with an oar, usually with each pulling an oar with two hands. Overview Stern sculling is the process of propelling a watercraft by moving a single, stern-mounted oar from side to side while changing the angle of the blade so as to generate forward thrust on both strokes. The technique is very old and its origin uncertain, though it is thought to have developed independently in different locations and times. It is known to have been used in ancient China, and on the Great Lakes of North America by pre-Columbian Americans. In stern sculling, the oar pivots on the boat's stern, and the inboard end is pushed to one s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rowing (sport)
Rowing, sometimes called crew in the United States, is the sport of racing boats using oars. It differs from paddling sports in that rowing oars are attached to the boat using oarlocks, while paddles are not connected to the boat. Rowing is divided into two disciplines: sculling and sweep rowing. In sculling, each rower holds two oars—one in each hand, while in sweep rowing each rower holds one oar with both hands. There are several boat classes in which athletes may compete, ranging from single sculls, occupied by one person, to shells with eight rowers and a coxswain, called eights. There are a wide variety of course types and formats of racing, but most elite and championship level racing is conducted on calm water courses long with several lanes marked using buoys. Modern rowing as a competitive sport can be traced to the early 17th century when professional watermen held races ( regattas) on the River Thames in London, England. Often prizes were offered by the L ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Single Scull
A single scull (or a scull) is a rowing boat designed for a single person who propels the boat with two oars, one in each hand. Racing boats (often called "shells") are long, narrow, and broadly semi-circular in cross-section in order to minimize drag. They have riggers, which apply the forces symmetrically to each side of the boat and (usually) a fin towards the rear which helps prevent roll and yaw. Originally made from wood, shells are now almost always made from a composite material (usually carbon-fibre reinforced plastic) for strength and weight advantages. Recreational single sculls tend to be shorter and a little wider than racing boats and can have a slightly flattened hull shape to provide more stability. Recreational single sculls can be made of a variety of materials including carbon fiber, fiberglass, wood or rotomoulded polyethylene. The single scull is the 2nd slowest category of racing boat (faster than the coxed pair), and competitors are recognised by other ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Racing Shell
In watercraft, a racing shell (also referred to as just a ''fine boat'' (UK) or just ''shell'') is an extremely narrow, and often comparatively long, rowing boat specifically designed for racing or exercise. It is outfitted with long oars, outriggers to hold the oarlocks away from the boat, and sliding seats. The boat's long length and semicircular cross-section reduce drag to a minimum. This makes the boat both fast and unstable. It must be balanced by the rowers to avoid tipping. Being able to balance – or "set" – the boat while putting maximum effort into the oars is therefore an essential skill of sport rowing. History The racing shell evolved from the simple working rowboat. Boats with longer hulls and narrower in beam were developed in the early 19th century specifically for team racing. These dedicated boats were the first boats that could be called racing shells, and they evolved into the highly specialized forms used today. Riggers A narrower boat provides a sharp ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Single Scull
A single scull (or a scull) is a rowing boat designed for a single person who propels the boat with two oars, one in each hand. Racing boats (often called "shells") are long, narrow, and broadly semi-circular in cross-section in order to minimize drag. They have riggers, which apply the forces symmetrically to each side of the boat and (usually) a fin towards the rear which helps prevent roll and yaw. Originally made from wood, shells are now almost always made from a composite material (usually carbon-fibre reinforced plastic) for strength and weight advantages. Recreational single sculls tend to be shorter and a little wider than racing boats and can have a slightly flattened hull shape to provide more stability. Recreational single sculls can be made of a variety of materials including carbon fiber, fiberglass, wood or rotomoulded polyethylene. The single scull is the 2nd slowest category of racing boat (faster than the coxed pair), and competitors are recognised by other ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Swimming (sport)
Swimming is an individual or team racing sport that requires the use of one's entire body to move through water. The sport takes place in pools or open water (e.g., in a sea or lake). Competitive swimming is one of the most popular Olympic sports, with varied distance events in butterfly, backstroke, breaststroke, freestyle, and individual medley. In addition to these individual events, four swimmers can take part in either a freestyle or medley relay. A medley relay consists of four swimmers who will each swim a different stroke, ordered as backstroke, breaststroke, butterfly and freestyle. Swimming each stroke requires a set of specific techniques; in competition, there are distinct regulations concerning the acceptable form for each individual stroke. There are also regulations on what types of swimsuits, caps, jewelry and injury tape that are allowed at competitions. Although it is possible for competitive swimmers to incur several injuries from the sport, such as ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Racing Shell")
