|
S-SCH
S-SCH stands for "Secondary Synchronization Channel in UMTS" (Universal Mobile Telecommunications System). S-SCH is a pure downlink physical channel broadcast over the entire cell. It is transmitted unscrambled during the first 256 chips of each time slot, in time multiplex with Primary Common Control Physical Channel (P-CCPCH). It is the only channel that is not spread over the entire radio frame. The S-SCH is repeated at the beginning of each time slot Broadcast programming is the practice of organizing or ordering (scheduling) of broadcast media shows, typically radio and television, in a daily, weekly, monthly, quarterly or season-long schedule. Modern broadcasters use broadcast automation ... and the same code is used by all the cells and enables the UE to detect the existence of the UMTS cell. The slot synchronization is done using the P-SCH but S-SCH is used to synchronize the UE with the frame boundaries. It also enables the UE to identify the Primary Scrambling C ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
P-SCH
P-SCH stands for "Primary Synchronisation Channel" in Universal Mobile Telecommunications System.The P-SCH is a pure downlink physical channel broadcast over the entire cell. It is transmitted unscrambled during the first 256 chips of each time slot, in time multiplex with Primary Common Control Physical Channel (P-CCPCH). It is the only channel that is not spread over the entire radio frame. The P-SCH is repeated at the beginning of each time slot and the same code is used by all the cells and enables the UE to detect the existence of the UMTS cell and to synchronize itself on the time slot boundaries. This is normally done with a single matched filter or any similar device. The slot timing of the cell is obtained by detecting peaks in the matched filter output. This channel is used in conjunction with S-SCH to search for a UMTS cell and synchronize Synchronization is the coordination of events to operate a system in unison. For example, the conductor of an orchestra keeps ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Universal Mobile Telecommunications System
The Universal Mobile Telecommunications System (UMTS) is a third generation mobile cellular system for networks based on the GSM standard. Developed and maintained by the 3GPP (3rd Generation Partnership Project), UMTS is a component of the International Telecommunication Union IMT-2000 standard set and compares with the CDMA2000 standard set for networks based on the competing cdmaOne technology. UMTS uses wideband code-division multiple access (W-CDMA) radio access technology to offer greater spectral efficiency and bandwidth to mobile network operators. UMTS specifies a complete network system, which includes the radio access network ( UMTS Terrestrial Radio Access Network, or UTRAN), the core network (Mobile Application Part, or MAP) and the authentication of users via SIM (subscriber identity module) cards. The technology described in UMTS is sometimes also referred to as Freedom of Mobile Multimedia Access (FOMA) or 3GSM. Unlike EDGE (IMT Single-Carrier, based on GS ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Downlink
In a telecommunications network, a link is a communication channel that connects two or more devices for the purpose of data transmission. The link may be a dedicated physical link or a virtual circuit that uses one or more physical links or shares a physical link with other telecommunications links. A telecommunications link is generally based on one of several types of information transmission paths such as those provided by communication satellites, terrestrial radio communications infrastructure and computer networks to connect two or more points. The term ''link'' is widely used in computer networking to refer to the communications facilities that connect nodes of a network. Sometimes the communications facilities that provide the communication channel that constitutes a link are also included in the definition of ''link''. Types Point-to-point A point-to-point link is a dedicated link that connects exactly two communication facilities (e.g., two nodes of a network, an ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Physical Channel
In the seven-layer OSI model of computer networking, the physical layer or layer 1 is the first and lowest layer; The layer most closely associated with the physical connection between devices. This layer may be implemented by a PHY chip. The physical layer provides an electrical, mechanical, and procedural interface to the transmission medium. The shapes and properties of the electrical connectors, the frequencies to broadcast on, the line code to use and similar low-level parameters, are specified by the physical layer. Role The physical layer defines the means of transmitting a stream of raw bits over a physical data link connecting network nodes. The bitstream may be grouped into code words or symbols and converted to a physical signal that is transmitted over a transmission medium. The physical layer consists of the electronic circuit transmission technologies of a network. It is a fundamental layer underlying the higher level functions in a network, and can be ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Time Multiplexing
Time-division multiplexing (TDM) is a method of transmitting and receiving independent signals over a common signal path by means of synchronized switches at each end of the transmission line so that each signal appears on the line only a fraction of time in an alternating pattern. This method transmits two or more digital signals or analog signals over a common channel. It can be used when the bit rate of the transmission medium exceeds that of the signal to be transmitted. This form of signal multiplexing was developed in telecommunications for telegraphy systems in the late 19th century, but found its most common application in digital telephony in the second half of the 20th century. History Time-division multiplexing was first developed for applications in telegraphy to route multiple transmissions simultaneously over a single transmission line. In the 1870s, Émile Baudot developed a time-multiplexing system of multiple Hughes telegraph machines. In 1944, the Brit ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Time Slot
Broadcast programming is the practice of organizing or ordering (scheduling) of broadcast media shows, typically radio and television, in a daily, weekly, monthly, quarterly or season-long schedule. Modern broadcasters use broadcast automation to regularly change the scheduling of their shows to build an audience for a new show, retain that audience, or compete with other broadcasters' shows. Most broadcast television shows are presented weekly in prime time or daily in other dayparts, though exceptions are not rare. At a micro level, scheduling is the minute planning of the transmission; what to broadcast and when, ensuring an adequate or maximum utilization of airtime. Television scheduling strategies are employed to give shows the best possible chance of attracting and retaining an audience. They are used to deliver shows to audiences when they are most likely to want to watch them and deliver audiences to advertisers in the composition that makes their advertising most like ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
