|
Optimum Scuba Weighting
A diving weighting system is ballast weight added to a diver or diving equipment to counteract excess buoyancy. They may be used by divers or on equipment such as diving bells, submersibles or camera housings. Divers wear diver weighting systems, weight belts or weights to counteract the buoyancy of other diving equipment, such as diving suits and aluminium diving cylinders, and buoyancy of the diver. The scuba diver must be weighted sufficiently to be slightly negatively buoyant at the end of the dive when most of the breathing gas has been used, and needs to maintain neutral buoyancy at safety or obligatory decompression stops. During the dive, buoyancy is controlled by adjusting the volume of air in the buoyancy compensation device (BCD) and, if worn, the dry suit, in order to achieve negative, neutral, or positive buoyancy as needed. The amount of weight required is determined by the maximum overall positive buoyancy of the fully equipped but unweighted diver anticipated dur ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Buoyancy Compensation Device
Buoyancy (), or upthrust, is the force exerted by a fluid opposing the weight of a partially or fully immersed object (which may be also be a parcel of fluid). In a column of fluid, pressure increases with depth as a result of the weight of the overlying fluid. Thus, the pressure at the bottom of a column of fluid is greater than at the top of the column. Similarly, the pressure at the bottom of an object submerged in a fluid is greater than at the top of the object. The pressure difference results in a net upward force on the object. The magnitude of the force is proportional to the pressure difference, and (as explained by Archimedes' principle) is equivalent to the weight of the fluid that would otherwise occupy the submerged volume of the object, i.e. the Displacement (fluid), displaced fluid. For this reason, an object with average density greater than the surrounding fluid tends to sink because its weight is greater than the weight of the fluid it displaces. If the objec ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Glossary Of Underwater Diving Terminology
This is a glossary of technical terms, jargon, diver slang and acronyms used in underwater diving Underwater diving, as a human activity, is the practice of descending below the water's surface to interact with the environment. It is also often referred to as diving (other), diving, an ambiguous term with several possible meani .... The definitions listed are in the context of underwater diving. There may be other meanings in other contexts. Underwater diving can be described as a human activity – intentional, purposive, conscious and subjectively meaningful sequence of actions. Underwater diving is practiced as part of an occupation, or for recreation, where the practitioner submerges below the surface of the water or other liquid for a period which may range between seconds to the order of a day at a time, either exposed to the ambient pressure or isolated by a pressure resistant suit, to interact with the underwater environment for pleasure, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Diver Swimming With Head Up Trim
Diver or divers may refer to: *Diving (sport), the sport of performing acrobatics while jumping or falling into water *Practitioner of underwater diving, including: **scuba diving, **freediving, **surface-supplied diving, **saturation diving, and ** atmospheric suit diving People * Diver (surname) *Edward Divers (1837–1912), British chemist *"Diver", nickname of Tom Derrick (1914–1945), Australian Second World War recipient of the Victoria Cross Military *V-1 flying bomb, code named "diver" by the British World War II armed forces ** Operation Diver, the British countermeasures against the German V-1 flying bomb campaign * AUM-N-4 Diver, a proposed U.S. Navy torpedo-carrying missile of the late 1940s. * Diver (United States Navy) Arts and entertainment * ''Diver'' (EP), a 2006 EP by A Wilhelm Scream * "Diver" (Nico Touches the Walls song), a 2011 song by Nico Touches the Walls * "Diver" (Kana-Boon song), a 2015 song by Kana-Boon * ''Divers'' (album), a 2015 album by Joan ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Standard Diving Dress
Standard diving dress, also known as hard-hat or copper hat equipment, deep sea diving suit or heavy gear, is a type of diving suit that was formerly used for all relatively deep underwater work that required more than breath-hold duration, which included marine salvage, civil engineering, pearl shell diving and other commercial diving work, and similar naval diving applications. Standard diving dress has largely been superseded by lighter and more comfortable equipment. Standard diving dress consists of a diving helmet made from copper and brass or bronze, clamped over a watertight gasket to a waterproofed canvas suit, an air hose from a surface-supplied manually operated pump or low pressure breathing air compressor, a diving knife, and weights to counteract buoyancy, generally on the chest, back and shoes. Later models were equipped with a diver's telephone for voice communications with the surface. The term ''deep sea diving'' was used to distinguish diving with th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Diving Helmet
A diving helmet is a rigid head enclosure with a breathing gas supply used in underwater diving. They are worn mainly by professional divers engaged in surface-supplied diving, though some models can be used with scuba equipment. The upper part of the helmet, known colloquially as the ''hat'' or ''bonnet'', may be sealed directly to the diver using a ''neck dam'', connected to a diving suit by a lower part, known as a ''breastplate'', or ''corselet'', depending on regional language preferences, or simply rest on the diver's shoulders, with an open bottom, for shallow water use. The helmet isolates the diver's head from the water, allows the diver to see clearly underwater, provides the diver with breathing gas, protects the diver's head when doing heavy or dangerous work, and usually provides voice communications with the surface (and possibly other divers). If a helmeted diver becomes unconscious but is still breathing, most helmets will remain in place and continue to deliv ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Diving Bell
A diving bell is a rigid chamber used to transport divers from the surface to depth and back in open water, usually for the purpose of performing underwater work. The most common types are the open-bottomed wet bell and the closed bell, which can maintain an internal pressure greater than the external ambient. Diving bells are usually suspended by a cable, and lifted and lowered by a winch from a surface support platform. Unlike a submersible, the diving bell is not designed to move under the control of its occupants, or to operate independently of its launch and recovery system. The wet bell is a structure with an airtight chamber which is open to the water at the bottom, that is lowered underwater to operate as a base or a means of transport for a small number of divers. Air is trapped inside the bell by Hydrostatic pressure, pressure of the water at the interface. These were the first type of diving chamber, and are still in use in modified form. The closed bell is a pressur ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Decompression Illness
Decompression Illness (DCI) comprises two different conditions caused by rapid decompression of the body. These conditions present similar symptoms and require the same initial first aid. Scuba divers are trained to ascend slowly from depth to avoid DCI. Although the incidence is relatively rare, the consequences can be serious and potentially fatal, especially if untreated. Classification DCI can be caused by two different mechanisms, which result in overlapping sets of symptoms. The two mechanisms are: * Decompression sickness (DCS), which results from metabolically inert gas dissolved in body tissue under pressure emerging out of solution and forming bubbles during decompression. It typically afflicts underwater divers on poorly managed ascent from depth or aviators flying in inadequately pressurised aircraft. * Arterial gas embolism (AGE), which is perfusion blockage caused by gas bubbles in the arterial bloodstream. In the context of DCI these may form either as a result of ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Saturation Diving
Saturation diving is an ambient pressure diving technique which allows a diver to remain at working depth for extended periods during which the body tissues become solubility, saturated with metabolically inert gas from the breathing gas mixture. Once saturated, the time required for Decompression (diving), decompression to surface pressure will not increase with longer exposure. The diver undergoes a single decompression at the end of the exposure of several days to weeks duration. The ratio of productive working time at depth to unproductive decompression time is thereby increased, and the health risk to the diver incurred by decompression is minimised. When a diver breathes pressurized gas, metabolically inert gases are needed in the mixture to dilute oxygen to non-toxic levels. These gases dissolve into the body's tissues, but if they come out of solution too quickly during decompression, they form bubbles in the tissues which can cause decompression sickness ("the bends"), a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Surface-supplied Diving
Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work. The copper helmeted free-flow standard di ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Correct Scuba Weighting
A diving weighting system is ballast weight added to a diver or diving equipment to counteract excess buoyancy. They may be used by divers or on equipment such as diving bells, submersibles or camera housings. Divers wear diver weighting systems, weight belts or weights to counteract the buoyancy of other diving equipment, such as diving suits and aluminium diving cylinders, and buoyancy of the diver. The scuba diver must be weighted sufficiently to be slightly negatively buoyant at the end of the dive when most of the breathing gas has been used, and needs to maintain neutral buoyancy at safety or obligatory decompression stops. During the dive, buoyancy is controlled by adjusting the volume of air in the buoyancy compensation device (BCD) and, if worn, the dry suit, in order to achieve negative, neutral, or positive buoyancy as needed. The amount of weight required is determined by the maximum overall positive buoyancy of the fully equipped but unweighted diver anticipated dur ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Decompression Practice
To prevent or minimize decompression sickness, divers must properly plan and monitor decompression. Divers follow a decompression model to safely allow the release of excess inert gases dissolved in their body tissues, which accumulated as a result of breathing at ambient pressures greater than surface atmospheric pressure. Decompression models take into account variables such as depth and time of dive, breathing gasses, altitude, and equipment to develop appropriate procedures for safe ascent. Decompression may be continuous or staged, where the ascent is interrupted by stops at regular depth intervals, but the entire ascent is part of the decompression, and ascent rate can be critical to harmless elimination of inert gas. What is commonly known as no-decompression diving, or more accurately no-stop decompression, relies on limiting ascent rate for avoidance of excessive bubble formation. Staged decompression may include deep stops depending on the theoretical model used fo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
