|
Man The Yards
A yard is a spar on a mast from which sails are set. It may be constructed of timber or steel or from more modern materials such as aluminium or carbon fibre. Although some types of fore and aft rigs have yards, the term is usually used to describe the horizontal spars used on square rigged sails. In addition, for some decades after square sails were generally dispensed with, some yards were retained for deploying wireless (radio) aerials and signal flags. Parts of the yard ; Bunt : The short section of the yard between the ''slings'' that attach it to the mast. ; Quarters : The port and starboard quarters form the bulk of the yard, extending from the slings to the fittings for the lifts and braces. ; Yardarms : The outermost tips of the yard: outboard from the attachments for the lifts. Note that these terms refer to stretches of the same spar, not to separate component parts. Controlling the yard The yard can rotate around the mast to allow the direction of the vess ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Halyard
In sailing, a halyard or halliard is a line (rope) that is used to hoist a ladder, sail, flag or yard. The term "halyard" derives from the Middle English ''halier'' ("rope to haul with"), with the last syllable altered by association with the English unit of measure "yard". Halyards, like most other parts of the running rigging, were classically made of natural fibre like manila or hemp. Sail types * A square rig sail with a halyard is mounted on a lifting yard that is free to slide on a short section of the mast. The halyard is used to raise (hail or hal) the yard when setting the sail. * A gaff rigged sail has two; a throat halyard to lift the end of the gaff nearer the mast, and a peak halyard to lift the outer end. * A more modern triangular (Bermuda or "Marconi") sail has only one halyard which is attached at its uppermost point (the ''head''). Fastenings Halyards can be attached a number of ways to the head of a triangular sail. The most common methods are as follows ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Lateen
A lateen (from French ''latine'', meaning "Latin") or latin-rig is a triangular sail set on a long Yard (sailing) , yard mounted at an angle on the mast (sailing) , mast, and running in a fore-and-aft direction. The Settee (sail), settee can be considered to be an associated type of the same overall category of sail. The lateen originated in the Mediterranean as early as the 2nd century AD, during Roman times, and became common there by the 5th century. The wider introduction of lateen rig at this time coincided with a reduction in the use of the Mediterranean square rig of the classical era. Since the performance of these two rigs is broadly similar, it is suggested that the change from one to the other was on cost grounds, since lateen rigs used fewer components and had less cordage to be replaced when it wore out. Arabs , Arab seafarers adopted the lateen rig at a later datethere is some limited archaeological evidence of lateen rig in the Indian Ocean in the 13th century AD ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Square-rig
Square rig is a generic type of sail and rigging arrangement in which a sailing vessel's primary driving sails are carried on horizontal spars that are perpendicular (or square) to the median plane of the keel and masts of the vessel. These spars are called and their tips, outside the lifts, are called the . A ship mainly rigged so is called a square-rigger. In " Jackspeak" (Royal Navy slang), it also refers to the dress uniform of Junior Ratings. History Single sail square rigs were used by the ancient Egyptians, the Phoenicians, the Greeks, the Romans, and the Celts. Later the Scandinavians, the Germanic peoples, and the Slavs adopted the single square-rigged sail, with it becoming one of the defining characteristics of the classic “Viking” ships.The Viking ship's single square-rigged sail. http://Longshipco.org/sail.html Retrieved 2018-8-20 See also * Glossary of nautical terms (A-L) Glossary of nautical terms may refer to: * Glossary of nautical terms (A–L) ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cutty Sark Tall Ships' Race
The Tall Ships Races are races for sail training "tall ships" (sailing ships). The races are designed to encourage international friendship and training for young people in the art of sailing. The races are held annually in European waters and consists of two racing legs of several hundred nautical miles, and a "cruise in company" between the legs. Over one half of the crew of each ship participating in the races must consist of young people. Between 1973 and 2003 the races were known as The Cutty Sark Tall Ships Races, having been sponsored by Cutty Sark whisky. From 2004 to 2010 the races were supported by the City, Province and Port of Antwerp. The sponsor of the Tall Ships Races 2010–2014 was the city of Szczecin. Tall ships By the 21st century, "tall ship" is often used generically for large, classic, sailing vessels, but is also a technically defined term by Sail Training International. The definitions are subject to various technicalities, but by 2011 there are only tw ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
USS Columbus (1819) Manning The Yards
Four ships of the United States Navy have been named USS ''Columbus'', the first two after the Exploration, explorer Christopher Columbus, and the other two after Columbus, Ohio, the capital of the state. * , a 24-gun armed ship purchased for the Continental Navy in 1775, and active until she was captured and burned in 1778 * , a 74-gun ship of the line commissioned in 1819, and in periodic service until 1861 when she was sunk to prevent capture * , a heavy cruiser commissioned at the very end of World War II, converted to a guided missile cruiser ''CG-12'' in 1959, and decommissioned in 1975 * , a attack submarine commissioned in 1993 and in active service {{DEFAULTSORT:Columbus, Uss United States Navy ship names ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Gasket (sailing)
In sailing, a gasket is a sail tie (a rope that is used to fasten down a sail) that is left permanently in position. This is to give ease of use in situations when working in an exposed position, such as on the yard The yard (symbol: yd) is an English units, English unit of length in both the British imperial units, imperial and US United States customary units, customary systems of measurement equalling 3 foot (unit), feet or 36 inches. Sinc ... of a square sail, or on a bowsprit. Some gaskets are made of sennit instead of rope. Usage and history In the most recent version of square rig, dating to the end of the 19th century and into the 20th century, square sails were fastened to jackstays, metal rails that went along the top of the yard, spaced a short distance from the yard so that a rope could pass through the gap. The gaskets were also fastened to the jackstay. When stowing a sail, the gasket is passed abaft (behind) the yard and up on the other side, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sheet (sailing)
In sailing, a sheet is a line (rope, cable or chain) used to control the movable corner(s) (clews) of a sail. Terminology In nautical usage the term "sheet" is applied to a line or chain attached to the lower corners of a sail for the purpose of extension or change of direction. The connection in derivation with the root "shoot" is more clearly seen in "sheet-anchor", one that is kept in reserve, to be "shot" in case of emergency. Fore-and-aft rigs Fore-and-aft rigs comprise the vast majority of sailing vessels in use today, including effectively all dinghies and yachts. The sheet on a fore-and-aft sail controls the angle of the sail to the wind, and should be adjusted to keep the sail just filled. Most smaller boats use the Bermuda rig, which has two or three sets of sheets: * The mainsheet is attached to the boom, and is used to control the mainsail. In a rig with no boom on the mainsail, the mainsheet would attach directly to the mainsail clew. A mainsheet is a line con ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Clewlines And Buntlines
Clewlines and buntlines are lines used to handle the sails of a square rigged ship. Although the common perception of a traditionally rigged ship is that the sails are handled from "up in the rigging", the majority of the work is actually carried out from the deck. In particular, when sailors go aloft to stow the square sails by bundling them up and tying them to the yard (with gaskets) they don't have to pull the whole weight of the sail up towards them. That work has already been carried out from the deck using the clewlines and the buntlines. As the name suggests, clewlines are attached to the outer corners or clews of the sail. They lift more weight than the buntlines, and also have to pull against the sheets - although these will have been released there is still a certain amount of friction produced by the blocks and fairleads that they run through. For this reason the clewlines are usually fitted with blocks to increase the mechanical advantage. The clewlines are colou ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Ship Of The Line
A ship of the line was a type of naval warship constructed during the Age of Sail from the 17th century to the mid-19th century. The ship of the line was designed for the naval tactics in the Age of Sail, naval tactic known as the line of battle, which involved the two columns of opposing warships manoeuvering to volley fire with the naval cannon, cannons along their Broadside (naval), broadsides. In conflicts where opposing ships were both able to fire from their broadsides, the faction with more cannons firingand therefore more firepowertypically had an advantage. From the end of the 1840s, the introduction of steam engine, steam power brought less dependence on the wind in battle and led to the construction of propeller, screw-driven wooden-hulled ships of the line; a number of purely sail-powered ships were converted to this propulsion mechanism. However, the rise of the ironclad warship, ironclad frigate, starting in 1859, made steam-assisted ships of the line obsolete. The ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Windjammer
A windjammer is a commercial sailing ship with multiple masts, however rigged. The informal term "windjammer" arose during the transition from the Age of Sail to the Age of Steam during the 19th century. The Oxford English Dictionary records the term "wind jammer" with reference to a ship from 1878 and nautical use of "windjamming" from 1886. The word has evolved to include passenger cruise ships. Etymology The word " windjammer" has a variety of associations, both nautical and not. In the late 19th century the term was pejorative, as used by sailors aboard steamships. * In 1892, ''Rudder Magazine'' said in a story, "The deck hands on the liners contemptuously refer to ailing vesselsas 'wind-jammers'." * In 1917, the American Dialect Society recorded residents of the U.S. state of Maine referring to fore-and-aft sailing vessels as "windjammers" in a list of regional word usages. *''The Oxford Companion to Ships and the Sea'' calls ''windjammer'' "a non-nautical name by whic ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
