|
Lens Board
A lens board or lensboard is a photographic part used for securing a lens to the front standard of a large format view camera. The lens board itself is usually flat, square, and made of metal (most commonly aluminum), wood, or plastic. The lens board will have a hole of various diameters drilled dead center on the board. A lens board typically varies between 1 and 4 millimeters in thickness. The overall size and shape of the lens board depends on the brand of camera and film format used. Some cameras will use 2 to 4 screws to secure the lens board to the front standard of the view camera, most commonly however, the lens board will be secured by one or more locking levers or tabs to allow tool-less removal of the lens board. The rear surface of a lens board is usually painted matte black to keep light entering the camera through the lens during exposure from reflecting off the surface and interfering with the projected image. While most lens boards are flat, some are recessed to acc ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cambo Lens Board
Cambo may refer to: *Cambo, Northumberland, a village in Northumberland, England *Cambo camera, Dutch camera manufacturer *Cambo Estate, historic house in Fife, Scotland *Cambo-les-Bains, town in Pyrénées-Atlantiques, France *Cambo oil field, prospective oil field west of the Shetland Islands in Scotland See also *Francesc Cambó (1876–1947), Spanish Catalan politician and translator {{disambiguation, geo, surname ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Shutter (photography)
In photography, a shutter is a device that allows light to pass for a determined period, exposing photographic film or a photosensitive digital sensor to light in order to capture a permanent image of a scene. A shutter can also be used to allow pulses of light to pass outwards, as seen in a movie projector or a signal lamp. A shutter of variable speed is used to control exposure time of the film. The shutter is constructed so that it automatically closes after a certain required time interval. The speed of the shutter is controlled either automatically by the camera based on the overall settings of the camera, manually through digital settings, or manually by a ring outside the camera on which various timings are marked. Camera shutter Camera shutters can be fitted in several positions: * Leaf shutters are usually fitted within a lens assembly (''central shutter''), or more rarely immediately behind (''behind-the-lens shutter'') or, even more rarely, in front of a lens, and s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Lens Mount
A lens mount is an interface – mechanical and often also electrical – between a photographic camera body and a lens. It is a feature of camera systems where the System camera, body allows interchangeable lenses, most usually the rangefinder camera, single lens reflex type, single lens mirrorless type or any movie camera of 16 mm or higher film gauge, gauge. Lens mounts are also used to connect optical components in instrumentation that may not involve a camera, such as the modular components used in optical laboratory prototyping which join via C mount, C-mount or T-mount elements. Mount types A lens mount may be a screw-threaded type, a Bayonet#Linguistic impact, bayonet-type, or a breech-lock (friction lock) type. Modern still camera lens mounts are of the bayonet type, because the bayonet mechanism precisely aligns mechanical and electrical features between lens and body. Screw-threaded mounts are fragile and do not align the lens in a reliable rotational position, yet ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Photographic Lens
A camera lens, photographic lens or photographic objective is an optical lens (optics), lens or assembly of lenses (compound lens) used in conjunction with a camera body and mechanism to Imaging, make images of objects either on photographic film or on other media capable of storing an image Photosensitivity, chemically or Image sensor, electronically. There is no major difference in principle between a lens used for a still camera, a video camera, a telescope, a microscope, or other apparatus, but the details of design and construction are different. A lens might be permanently fixed to a camera, or it might be interchangeable lens camera, interchangeable with lenses of different focal lengths, apertures, and other properties. While in principle a simple lens, simple convex lens will suffice, in practice a compound lens made up of a number of optical lens elements is required to correct (as much as possible) the many optical aberrations that arise. Some aberrations will be prese ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Reprographic
Reprography (a portmanteau of ''reproduction'' and ''photography'') is the reproduction of graphics through mechanical or electrical means, such as photography or xerography. Reprography is commonly used in catalogs and archives, as well as in the architectural, engineering, and construction industries. Overview In the United States, the industry is relatively small, with approximately 3000 firms. It comprises entrepreneurial businesses serving predominantly the large- and wide-format reproduction needs of the legal, architectural, engineering, manufacturing, retail, and advertising industries. Average sales volume is about $1.5 million per year and average employee counts are 20–25 people. Large-format reproductions are produced with a variety of technologies dependent, in part, on the application of the final product and quantity needed. Examples of typical reproduction methods include: diazo (blueline), electrostatic (xerographic), photographic, laser, and ink jet. Rep ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Enlarger
An enlarger is a specialized transparency Image projector, projector used to produce Photography, photographic prints from film or glass Negative (photography), negatives, or from reversal film, transparencies. Construction All enlargers consist of a light source, normally an incandescent light bulb shining though a condenser (optics), condenser or translucent screen to provide even illumination, a holder for the negative or transparency, and a specialized lens for projection, though some, such as the Rapid Rectilinear or Aplanat could be used in both camera and enlarger. Enlarger lenses, like the Dialyte lens, dialyte construction, are generally symmetrical in design or nearly so, optimised for sharp focus at 2x to 10x magnification. The light passes through a Photographic film, film holder, which holds the exposed and Film developing, developed photographic negative or transparency. Prints made with an enlarger are called ''enlargements''. Typically, enlargers are used in a dar ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Enlarger Lens Board
An enlarger is a specialized transparency projector used to produce photographic prints from film or glass negatives, or from transparencies. Construction All enlargers consist of a light source, normally an incandescent light bulb shining though a condenser or translucent screen to provide even illumination, a holder for the negative or transparency, and a specialized lens for projection, though some, such as the Rapid Rectilinear or Aplanat could be used in both camera and enlarger. Enlarger lenses, like the dialyte construction, are generally symmetrical in design or nearly so, optimised for sharp focus at 2x to 10x magnification. The light passes through a film holder, which holds the exposed and developed photographic negative or transparency. Prints made with an enlarger are called ''enlargements''. Typically, enlargers are used in a darkroom, an enclosed space from which extraneous light may be excluded; some commercial enlargers have an integral dark box so that the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Locknut
A locknut, also known as a lock nut, locking nut, self-locking nut, prevailing torque nut,. stiff nut or elastic stop nut, is a Nut (hardware), nut that resists loosening under vibrations and torque. Prevailing torque nuts have some portion of the nut that deforms elastic deformation, elastically to provide a locking action. Free-spinning locknuts exist which carry the advantage of not requiring extra torque until seated. Types There are various kinds of specialised lock nuts, including: * Castellated nut * Distorted thread locknut **Centerlock nut **Elliptical offset locknut **Toplock nut **Philidas nut * Interfering thread nut **Tapered thread nut * Jam nut * Jet nut (K-nut). * Keps nut (K-nut or washer nut) with a free-spinning washer. In the locknut form, this is a star-type lock washer. * Plate nut * Polymer insert nut (Nyloc nut) * Security locknut All steel reusable nut for high vibration and harsh environments. * Serrated face nut * Serrated flange nut * Speed nut ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Graphex Lens Board
Design Professionals of Canada (or DesCan, formerly known as the Society of Graphic Designers of Canada, or GDC) is Canadaʼs national certification body for graphic and communication design and since 1956 has established standards for design professionals, educators, and leaders. DesCan licenses and certifies members whose services meet the standardized, national criteria. DesCan was Canada's first distinct group to professionalize graphic design as a distinct field. History In 1956 designers Frank Davies, John Gibson, Frank Newfeld, and Leslie (Sam) Smart met in Toronto to form the Society of Typographic Designers of Canada (TDC). In 1968 the organization changed its name to the Society of Graphic Designers of Canada (GDC) with the Federal Charter approved on in 1976, unifying the country under one national association. In 1996 GDC's five Ontario Chapters combined to form the Association of Registered Graphic Designers of Ontario and received provincial legislation granting ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Nidec Copal Corporation
The , or Copal, is a Japanese manufacturer of optical, electronic and mechanical equipment, primarily for the photographic industry. It has been a subsidiary of Nidec Corporation since 1998, and was formerly known as the Copal Corporation. The company began operation in 1946, with small-scale production of photographic shutters; these are still one of the company's best-known products. In the 1960s the company began producing the well-known Copal Square vertically travelling metal blade focal plane shutter, which was very successful and was used in cameras by many prominent manufacturers. The ''Copal Square-S'', for example used in the Konica T3s (1973-1978) and the Nikkormat FT, is very reliable. It works over a wide temperature range. The electronically controlled Copal ''Square E'' (1968) was used in the Yashica TL Electro X, the Canon EF, the Nikkormat EL. For Minolta XE and the Leica R3 The Leica R3 was a 35mm SLR camera by Leica and the first model of their R s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Large Format
Large format photography refers to any imaging format of or larger. Large format is larger than "medium format", the or size of Hasselblad, Mamiya, Rollei, Kowa, and Pentax cameras (using 120 film, 120- and 220-roll film), and much larger than the frame of 135 film, 35 mm format. The main advantage of a large format, film or digital, is a higher resolution at the same pixel pitch, or the same resolution with larger pixels or grains which allows each pixel to capture more light enabling exceptional low-light capture. A 4×5 inch image (12.903 mm²) has about 15 times the area, and thus 15 times the total resolution, of a 35 mm frame (864 mm²). Large format cameras were some of the earliest photographic devices, and before enlargers were common, it was normal to just make 1:1 contact prints from a 4×5, 5×7, or 8×10-inch negative. Formats The most common large format is , which was the size used by cameras like the Graflex Speed Graphi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Machinist
A machinist is a tradesperson or trained professional who operates machine tools, and has the ability to set up tools such as milling machines, grinders, lathes, and drilling machines. A competent machinist will generally have a strong mechanical aptitude, the ability to correctly use precision measuring instruments and to interpret blueprints, and a working knowledge of the proper parameters required for successfully utilizing the various tools commonly used in machining operations. CNC (computer numerical control) comprises one of the most recent advances in manufacturing, in which a machinist uses specialized software to generate programmatic instructions (most commonly G-code) which are in turn interpreted by the machine to make components for a wide variety of industries. CNC programming is a skilled position which requires knowledge of math, speeds and feeds, machine tooling, work holding, and the different ways various materials react to stress and heat in the machining ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
