|
Frame And Panel
Frame and panel construction, also called rail and stile, is a woodworking technique often used in the making of coffered doors, ceilings, wainscoting, and decorative panels for cabinets, furniture Furniture refers to objects intended to support various human activities such as seating (e.g., Stool (seat), stools, chairs, and sofas), eating (table (furniture), tables), storing items, working, and sleeping (e.g., beds and hammocks). Furnitur ..., and home interiors. The basic idea is to capture a 'floating' panel within a frame, as opposed to techniques used in making a slab solid wood cabinet door or drawer front, the door is constructed of several solid wood pieces running in a vertical or horizontal direction with exposed endgrains. Usually, the panel is not glued to the frame but is left to 'float' within it so that seasonal movement of the wood constituting the panel does not distort the frame. Frame and panel construction at its most basic consists of five members: the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tongue And Groove
Tongue and groove is a method of fitting similar objects together, edge to edge, used mainly with wood, in flooring, parquetry, panelling, and similar constructions. A strong joint, it allows two flat pieces to be joined strongly together to make a single flat surface. Before plywood became common, tongue-and-groove boards were also used for sheathing buildings and to construct concrete formwork. Each piece has a slot (the ''groove'' or '' dado'') cut all along one edge or along two adjacent edges, and a thin, deep ridge (the ''tongue'') on the opposite edge or edges. The tongue projects a little less than the depth of the groove. Two or more pieces thus fit together closely. The joint is not normally glued, as shrinkage would then pull the tongue off. The effect of wood shrinkage is concealed when the joint is beaded or otherwise moulded. In another assembly method, the pieces are end-matched. This method eliminates the need for mitre joints, face nailing, and the use of joi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Woodworking
Woodworking is the skill of making items from wood, and includes cabinetry, furniture making, wood carving, joinery, carpentry, and woodturning. History Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials. Among the earlliest finds of woodworking are shaped sticks displaying notches from Kalambo Falls in southen Africa, dating to around 476,000 years ago. The Clacton spearhead from Clacton-on-Sea, England, dating to around 400,000 years ago,Allington-Jones, L., (2015) ''Archaeological Journal'', 172 (2) 273–296 The Clacton Spear – The Last One Hundred Years the Schöningen spears, from Schöningen (Germany) dating around 300,000 years ago and the Lehringen spear from no ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cabinet (furniture)
A cabinet is a case or cupboard with shelves or drawers for storing or displaying items. Some cabinets are stand alone while others are built in to a wall or are attached to it like a medicine cabinet. Cabinets are typically made of wood (solid or with veneers or artificial surfaces), coated steel (common for medicine cabinets), or synthetic materials. Commercial grade cabinets usually have a melamine-particleboard substrate and are covered in a high-pressure decorative laminate commonly referred to as Wilsonart or Formica. Cabinets sometimes have one or more doors on the front, which are mounted with door hardware, and occasionally a lock. Cabinets may have one or more doors, drawers, or shelves. Short cabinets often have a finished surface on top that can be used for display, or as a working surface, such as the countertops found in kitchens. A cabinet intended to be used in a bedroom and with several drawers typically placed one above another in one or more columns inte ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Mortise And Tenon
A mortise and tenon (occasionally mortice and tenon) is a Woodworking joints, joint that connects two pieces of wood or other material. Woodworking, Woodworkers around the world have used it for thousands of years to join pieces of wood, mainly when the adjoining pieces connect at right angles, though it can be used to connect two work pieces at any angle. Mortise-and tenon-joints are simple, strong, and stable, and can be used in many projects and which give an attractive look. They are either glued or friction-fitted into place. This joint is difficult to make, because of the precise measuring and tight cutting required; as such, modern woodworkers often use machinery specifically designed to cut mortises and matching tenons quickly and easily. Still, many woodworkers cut them by hand in a traditional manner. There are many variations of this type of joint, but its basic structure has two components, the ''mortise'' hole and the ''tenon'' tongue. The tenon, formed on the end o ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Butt Joint
A butt joint is a joinery, wood joint in which the end of a piece of material is simply placed (or “butted”) against another piece. The butt joint is the simplest joint. An unreinforced butt joint is also the weakest joint, as it provides a limited surface area for gluing and lacks any mechanical interlocking to resist external forces. Nonetheless, it generally provides sufficient strength in most cases, particularly when fasteners are used. Additional reinforcement through Tie (engineering), ties and plates is often used to improve the characteristics of butt-jointed structures. The joint is widely used in many applications due to its simplicity, notably in rough carpentry and construction. Methods There are several types of butt joint based on the orientation of the pieces being joined. These include the T-butt, end-to-end butt, Miter butt and edge-to-edge butt. The T-butt joint is a very simple joint to construct. Members are simply docked (cut off) at a right angle and ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bridle Joint
A bridle joint is a woodworking joint, similar to a mortise and tenon, in that a tenon is cut on the end of one member and a mortise is cut into the other to accept it. The distinguishing feature is that the tenon and the mortise are cut to the full width of the tenon member. The corner bridle joint (also known as a slot mortise and tenon) joins two members at their respective ends, forming a corner. This form of the joint is commonly used to house a rail in uprights, such as legs. It provides good strength in compression and is fairly resistant to racking, although a mechanical fastener or pin is often required. The bridle joint is very popular in workbench construction. Corner bridles are often used to join frame components when the frame is to be shaped. Material can be removed from the joined members after assembly without sacrificing joint integrity. A variation of the bridle joint is the T-bridle, which joins the end of one member to the middle of another.Woodwork JointPr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Mortise And Tenon
A mortise and tenon (occasionally mortice and tenon) is a Woodworking joints, joint that connects two pieces of wood or other material. Woodworking, Woodworkers around the world have used it for thousands of years to join pieces of wood, mainly when the adjoining pieces connect at right angles, though it can be used to connect two work pieces at any angle. Mortise-and tenon-joints are simple, strong, and stable, and can be used in many projects and which give an attractive look. They are either glued or friction-fitted into place. This joint is difficult to make, because of the precise measuring and tight cutting required; as such, modern woodworkers often use machinery specifically designed to cut mortises and matching tenons quickly and easily. Still, many woodworkers cut them by hand in a traditional manner. There are many variations of this type of joint, but its basic structure has two components, the ''mortise'' hole and the ''tenon'' tongue. The tenon, formed on the end o ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cope And Stick
Cope and stick construction is a frame and panel joinery technique often used in the making of doors, wainscoting, and other decorative features for cabinets, furniture, and homes. In cope and stick construction, the "stick" is the molded edge with a cut along the inside of the frame where it is to be joined to the panel. The panel piece that meets the molding at a right angle must be "coped," or given a cope cut, across the end grain End, END, Ending, or ENDS may refer to: End Mathematics *End (category theory) *End (topology) *End (graph theory) *End (graph_theory)#Cayley_graphs, End (group theory) (a subcase of the previous) *End (endomorphism) Sports and games *End (gridir ... of the wood to match the molding's profile. References Woodworking {{Woodworking-stub ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Spindle Moulder
Spindle may refer to: Textiles and manufacturing * Spindle (textiles), a straight spike to spin fibers into yarn * Spindle (tool), a rotating axis of a machine tool Biology * Common spindle and other species of shrubs and trees in genus ''Euonymus'' whose hard wood was used to make spindles * Spindle apparatus or mitotic spindle, a cellular structure in cell biology * Muscle spindle, stretch receptors within the body of a muscle * Spindle neuron, a specific class of neuron * Sleep spindle, bursts of neural oscillatory activity during sleep * Spindle transfer, an ''in vitro'' fertilization the technique Computing * Spindle (hard disk drive), the axis of a hard disk drive * Spindle (disc packaging), a plastic case for bulk optical disks Vehicles * Spindle (automobile), a part of a car's suspension system * Spindle (vehicle), an autonomous ice-penetrating vehicle Other uses * Spindle (furniture), cylindrically symmetric shaft, usually made of wood * ''Spindle'' (sculptur ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Wood Router
The router is a power tool with a flat base and a rotating blade extending past the base. The spindle (tool), spindle may be driven by an electric motor or by a pneumatic motor. It routs (hollows out) an area in hard material, such as wood or plastic. Routers are used most often in woodworking, especially cabinet making, cabinetry. They may be handheld or affixed to Router table (woodworking), router tables. Some woodworkers consider the router one of the most versatile power tools. There is also a traditional hand tool known as a router plane, a form of plane (tool), hand plane with a broad base and a narrow blade projecting well beyond the base plate. CNC wood routers add the advantages of Numerical control, computer numerical control (CNC). The laminate trimmer is a smaller, lighter version of the router. Although it is designed for trimming Lamination, laminates, it can also be used for smaller general routing work. Rotary tools can also be used similarly to routers with t ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tablesaw
A table saw (also known as a sawbench or bench saw in England) is a woodworking tool, consisting of a circular saw blade, mounted on an arbor, that is driven by an electric motor (directly, by belt, by cable, or by gears). The drive mechanism is mounted below a table that provides support for the material, usually wood, being cut, with the blade protruding up through the table into the material. In most modern table saws, the table is fixed and the blade position can be adjusted. Moving the blade up or down affects the depth of the cut by controlling how much of the blade is protruding above the table surface. Many saws also have an adjustable angle, where the blade can be tilted relative to the table. Some earlier saws instead had a fixed blade and the table could be adjusted for height (exposure of blade) and angle relative to the blade. Types The general types of table saws are compact, benchtop, jobsite, contractor, hybrid, cabinet, and sliding table saws. Benchtop Benc ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
