|
British Rail Class 41 (HST)
The British Rail Class 41 were two powercars built in 1972 by British Rail Engineering Limited's Crewe Works to operate with the prototype High Speed Train (HST) with Mark 3 carriages. History Two power cars were built in 1972 by British Rail Engineering Limited's Crewe Works, numbered 41001 and 41002. They initially conducted tests on the East Coast Main Line with the set based at Neville Hill TMD.Evolution trials of HST ''The Railway Magazine'' issue 880 August 1974 page 379 Having accumulated more than , including setting a diesel train speed record of between Northallerton and Thirsk in June 1973, they moved to the Great Western Main Line in 1974. On 5 May 1975, both entered revenue service on Great Western services between London Paddington and Bristol Temple Meads / Weston-super-Mare. After the Class 252 re-classification they were renumbered into the carriage numbering range as 43000 and 43001. After being replaced by production Class 43 HST powercars in the ea ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Railway Technical Centre
The Railway Technical Centre (RTC) in London Road, Derby, England, was the technical headquarters of the British Railways Board, and was built in the early 1960s. British Rail described it as the largest railway research complex in the world. The RTC centralised most of the technical services provided by the regional Chief Mechanical & Electrical Engineers (CM&EE) to form the Department of Mechanical & Electrical Engineering (DM&EE). In addition, it housed the newly formed British Rail Research Division which reported directly to the Board. The latter is well known for its work on the experimental Advanced Passenger Train (APT-E). At that early stage this was a concept vehicle, and in time the DM&EE applied the new knowledge to existing practice in the design of the High Speed Train (HST), the later prototype APT-P and other high-speed vehicles. History Opening The Research Division was the first to move into the purpose-built accommodation on London Road. This was formed ini ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Neville Hill TMD
Neville Hill is a railway train maintenance depot in Osmondthorpe, Leeds, England on the Leeds to Selby Line. The depot is situated to the east of Leeds railway station on the north side of the line. The TOPS depot code is NL. History In 1899 the locomotive shed at Holbeck was found not to have sufficient capacity for the number of locomotives using it, so an additional depot was constructed at Neville Hill by the North Eastern Railway at a cost of £132,971, with the facility being extended in 1904. Sometime during the 1950s the four-roundhouse shed was reduced by half and given a new frontage. A DMU shed is believed to have been added in 1958 along with servicing facilities for diesels although main line locomotives such as Class 45s were still being stabled outside the old brick-built steam shed in 1961. D2000 series 0-6-0 diesel shunters were the first diesel locos allocated to Neville Hill, probably about that time; the quartet in 1961 comprised D2242-4/6. At the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
CF Booth
C F Booth Ltd is a family-owned scrap metal and recycling business based in Rotherham, South Yorkshire, England. Operations Clarence Frederick Booth founded the business in 1920, as a metal purchaser and trader. Over the company's history, there have been a number of associated sites and businesses including: a rail served site in Doncaster (closed); and a site in Aston, near Rotherham, which concentrated on dismantling buses. Today the company's main site is the Clarence Metal Works, located on the residual southern section of the Sheffield and Rotherham Railway adjacent to the Rotherham Ring Road. Obtained in the 1960s, the railway embankment was removed and the ground level access allowed for easier dismantling of redundant diesel and electric locomotives. This work continues at present, although a number of the vehicles bought are now resold for preservation. Many wagons, carriages, underground and departmental stock are also processed here. C F Booth was involved in one ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 370
British Rail's Class 370 tilting trains, also referred to as APT-P (meaning Advanced Passenger Train Prototype), were the pre-production Advanced Passenger Train units. Unlike the earlier experimental gas-turbine APT-E unit, these units were powered by 25 kV AC overhead electrification and were used on the West Coast Main Line between London Euston and Glasgow Central. The APT-P is the most powerful domestic train to have operated in Britain, the eight traction motors fitted to the two central Motor Cars giving a total output of . This enabled the train to set the UK rail speed record of in December 1979, a record that stood for 23 years until broken by a Eurostar Class 373 on the newly completed High Speed 1. History The APT-P was unveiled to the public on 7 June 1978 and continued to be used for testing into 1986. Due to ongoing technical problems with these pre-production units, and a lack of cash or political will to take the project forward, the planned APT ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 43 (HST)
The British Rail Class 43 (HST) is the TOPS classification used for the InterCity 125 ''High Speed Train'' (formerly Classes 253 and 254) power cars, built by British Rail Engineering Limited from 1975 to 1982, and in service in the UK since 1976. The class is officially the fastest diesel locomotive in the world, with an absolute maximum speed of , and a regular service speed of . The record run was led by 43102 (43302) and trailed by 43159. History and background In the early 1970s, the British Railways Board made the decision to replace its main-line express diesel traction. Financial limitations were tight, so mass electrification was not possible. As a result, a new generation of high-speed diesel trains had to be developed. Experience with the high-speed Class 55 ''Deltic'' locomotives had shown that a low axle weight was essential to avoid damage to the track at sustained high speed, and that high-speed engines were the only way to provide a good enough power-to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Carriage And Wagon Numbering And Classification
A number of different numbering and classification schemes have been used for carriages and wagons on Britain's railways, and this page explains the principal systems. Carriages and wagons (either not self-propelled, or part of a multiple unit which has power units distributed throughout a semi-permanent formation of carriages) have frequently had similar arrangements for classification and numbering, so are considered together. There are also links to other pages that deal in greater depth with the particulars of individual types. Note on classification Carriage and wagon classification has never been quite the same as locomotive and multiple unit classification. For most railways, specific types were identified by their Diagram Number. This could simply be arranged by consecutive number, or there could be some greater organisation of numbers so that similar types were grouped together. However, carriages and wagons have rarely been referred to in general terms by their Diagra ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
British Rail Class 252
Class 252 was the classification allocated to the prototype High Speed Train (HST) unit, numbered 252001. History When originally built, in 1972, the prototype High Speed Train (HST) units were considered to be formed of two locomotives at either end of a rake of carriages. As a result, the power cars were designated Class 41 and numbered 41001/41002, while the carriages were given numbers in the new Mark 3 carriage number series. Shortly after their introduction, it was decided to classify the unit as a Diesel Electric Multiple Unit. It was allocated Class 252, and the whole formation was renumbered into a new carriage number series for HST and Advanced Passenger Train vehicles (4xxxx). Two coaches were not included in the renumbering (one Trailer First and one Trailer Second), as these were transferred for use in the Royal Train as part of its upgrade before the Silver Jubilee of Elizabeth II. The power cars were allocated numbers in the 43xxx series, and the two prototype ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Railway Age
''Railway Age'' is an American trade magazine for the rail transport industry. It was founded in 1856 in Chicago (the United States' major railroad hub) and is published monthly by Simmons-Boardman Publishing Corporation. History The magazine's original title was the ''Western Railroad Gazette,'' and was renamed the '' Railroad Gazette'' in 1870. In June 1908, after purchasing its chief rival, ''The Railway Age'' (founded in 1876 in Chicago), it changed its title to ''Railroad Age Gazette'', then in January 1910, to ''Railway Age Gazette''. In 1918 it shortened its name to the current title. ''Railway Review'' (originally the ''Chicago Railway Review'') was merged into ''Railway Age'' in 1927. Publications that have been merged into ''Railway Age'' include ''American Railroad Journal'', founded 1832, renamed ''The Railroad and Engineering Journal'' in 1887 by its then new owner/editor, Matthias N. Forney. It became ''American Engineer & Railroad Journal'' in 1883, then ''Rail ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Weston-super-Mare Railway Station
Weston-super-Mare railway station serves the seaside town of Weston-super-Mare in North Somerset, England. It is situated on a loop off the main Bristol to Taunton Line, from the zero point at via Box. The station is operated by Great Western Railway. It consists of two platforms linked by a covered footbridge which is also used as a public footpath between roads on either side of the station. Trains may use either platform in either direction, and many services are booked to pass each other at the station. History 1841 station The Bristol and Exeter Railway arrived in Weston-super-Mare on 14 June 1841. This was not the route that serves today's station, but rather a single-track branch line from Weston Junction railway station, midway between the present-day Worle and Uphill junctions, which terminated at a small station in Regent Street close to the High Street. The trains on this first branch line were made up of two or three small carriages which were hauled b ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Bristol Temple Meads Railway Station
Bristol Temple Meads is the oldest and largest railway station in Bristol, England. It is located away from London Paddington. It is an important transport hub for public transport in the city; there are bus services to many parts of the city and surrounding districts, with a ferry to the city centre. Bristol's other major station, Bristol Parkway, is a more recent station on the northern outskirts of the conurbation. Temple Meads was opened on 31 August 1840, as the western terminus of the Great Western Railway. The railway, including Temple Meads, was the first to be designed by the British engineer Isambard Kingdom Brunel. Soon, the station was also used by the Bristol and Exeter Railway, the Bristol and Gloucester Railway, the Bristol Harbour Railway and the Bristol and South Wales Union Railway. To accommodate the increasing number of trains, the station was expanded in the 1870s by Francis Fox and again between 1930 and 1935 by Percy Emerson Culverhouse. Brunel's ter ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Paddington Railway Station
Paddington, also known as London Paddington, is a Central London railway terminus and London Underground station complex, located on Praed Street in the Paddington area. The site has been the London terminus of services provided by the Great Western Railway and its successors since 1838. Much of the main line station dates from 1854 and was designed by Isambard Kingdom Brunel. Paddington is the London terminus of the Great Western Main Line; passenger services are primarily operated by Great Western Railway, which provides the majority of commuter and regional passenger services to west London and the Thames Valley region as well as long-distance intercity services to South West England and South Wales. The station is also the eastern terminus for Heathrow Express and the western terminus for Elizabeth line services from Shenfield railway station, Shenfield. Elizabeth line services also run through Paddington westwards to Reading, Berkshire, Reading, Heathrow Terminal 5, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Railway Technical Centre")
