Detached eddy simulation (DES) is a modification of a

Reynolds-averaged Navier–Stokes equations The Reynolds-averaged Navier–Stokes equations (RANS equations) are time-averaged equations of motion for fluid flow. The idea behind the equations is Reynolds decomposition, whereby an instantaneous quantity is decomposed into its time-averaged ...

(RANS) model in which the model switches to a subgrid scale formulation in regions fine enough for large eddy simulation (LES) calculations.

Details

Regions near

solid Solid is one of the four fundamental states of matter (the others being liquid, gas, and plasma). The molecules in a solid are closely packed together and contain the least amount of kinetic energy. A solid is characterized by structur ...

boundaries and where the

turbulent In fluid dynamics, turbulence or turbulent flow is fluid motion characterized by chaotic changes in pressure and flow velocity. It is in contrast to a laminar flow, which occurs when a fluid flows in parallel layers, with no disruption between ...

length scale is less than the maximum grid dimension are assigned the RANS mode of solution. As the turbulent length scale exceeds the grid dimension, the regions are solved using the LES mode. Therefore, the grid resolution is not as demanding as pure LES, thereby considerably cutting down the cost of the

computation Computation is any type of arithmetic or non-arithmetic calculation that follows a well-defined model (e.g., an algorithm). Mechanical or electronic devices (or, historically, people) that perform computations are known as ''computers''. An esp ...

. Though DES was initially formulated for the Spalart-Allmaras model, it can be implemented with other RANS models (Strelets, 2001), by appropriately modifying the length scale which is explicitly or implicitly involved in the RANS model. So while Spalart-Allmaras model based DES acts as LES with a wall model, DES based on other models (like two equation models) behave as a hybrid RANS-LES model. Grid generation is more complicated than for a simple RANS or LES case due to the RANS-LES switch. DES is a non-zonal approach and provides a single smooth

velocity Velocity is the directional speed of an object in motion as an indication of its rate of change in position as observed from a particular frame of reference and as measured by a particular standard of time (e.g. northbound). Velocity i ...

field across the RANS and the LES regions of the solution.Kotapati, R. B, Squires, K. D, and Forsythe, J. R. “Prediction of the Flow over an Airfoil at Maximum Lift”, In AIAA paper 2004- 0259 42nd Aerospace Sciences Meeting and Exhibit, January 2004.
/ref>

References

External links

CFD wiki article on DES technique

Article comparing RANS and DES for Automotive Applications.
Computational fluid dynamics Turbulence models {{fluiddynamics-stub