Autoregressive integrated moving average

In statistics and econometrics, and in particular in time series analysis, an autoregressive integrated moving average (ARIMA) model is a generalization of an autoregressive moving average (ARMA) model. Both of these models are fitted to time series data either to better understand the data or to predict future points in the series (forecasting). ARIMA models are applied in some cases where data show evidence of non-stationarity in the sense of mean (but not variance/ autocovariance), where an initial differencing step (corresponding to the "integrated" part of the model) can be applied one or more times to eliminate the non-stationarity of the mean function (i.e., the trend). When the seasonality shows in a time series, the seasonal-differencing could be applied to eliminate the seasonal component. Since the ARMA model, according to the Wold's decomposition theorem, is theoretically sufficient to describe a regular (a.k.a. purely nondeterministic) wide-sense stationary time series, we are motivated to make stationary a non-stationary time series, e.g., by using differencing, before we can use the ARMA model. Note that if the time series contains a predictable sub-process (a.k.a. pure sine or complex-valued exponential process), the predictable component is treated as a non-zero-mean but periodic (i.e., seasonal) component in the ARIMA framework so that it is eliminated by the seasonal differencing.

The part of ARIMA indicates that the evolving variable of interest is regressed on its own lagged (i.e., prior) values. The part indicates that the regression error is actually a linear combination of error terms whose values occurred contemporaneously and at various times in the past. The (for "integrated") indicates that the data values have been replaced with the difference between their values and the previous values (and this differencing process may have been performed more than once). The purpose of each of these features is to make the model fit the data as well as possible.

Non-seasonal ARIMA models are generally denoted ARIMA(''p'',''d'',''q'') where parameters ''p'', ''d'', and ''q'' are non-negative integers, ''p'' is the order (number of time lags) of the autoregressive model, ''d'' is the degree of differencing (the number of times the data have had past values subtracted), and ''q'' is the order of the moving-average model. Seasonal ARIMA models are usually denoted ARIMA(''p'',''d'',''q'')(''P'',''D'',''Q'')_''m'', where ''m'' refers to the number of periods in each season, and the uppercase ''P'',''D'',''Q'' refer to the autoregressive, differencing, and moving average terms for the seasonal part of the ARIMA model.

When two out of the three terms are zeros, the model may be referred to based on the non-zero parameter, dropping "", "" or "" from the acronym describing the model. For example, is , is , and is .

ARIMA models can be estimated following the Box–Jenkins approach.

Definition

Given time series data ''X''_''t'' where ''t'' is an integer index and the ''X''_''t'' are real numbers, an $\text(p',q)$ model is given by

:$X_t-\alpha_1X_- \dots -\alpha_X_ = \varepsilon_t + \theta_1 \varepsilon_ + \cdots +\theta_q \varepsilon_,$

or equivalently by

:$\left( 1 - \sum_^ \alpha_i L^i \right) X_t = \left( 1 + \sum_^q \theta_i L^i \right) \varepsilon_t \,$

where $L$ is the lag operator, the $\alpha_i$ are the parameters of the autoregressive part of the model, the $\theta_i$ are the parameters of the moving average part and the $\varepsilon_t$ are error terms. The error terms $\varepsilon_t$ are generally assumed to be independent, identically distributed variables sampled from a normal distribution with zero mean.

Assume now that the polynomial $\textstyle \left( 1 - \sum_^ \alpha_i L^i \right)$ has a unit root (a factor $(1-L)$) of multiplicity ''d''. Then it can be rewritten as:

:$\left( 1 - \sum_^ \alpha_i L^i \right) = \left( 1 - \sum_^ \varphi_i L^i \right) \left( 1 - L \right)^d.$

An ARIMA(''p'',''d'',''q'') process expresses this polynomial factorisation property with ''p''=''p'−d'', and is given by:

:$\left( 1 - \sum_^p \varphi_i L^i \right) (1-L)^d X_t = \left( 1 + \sum_^q \theta_i L^i \right) \varepsilon_t \,$

and thus can be thought as a particular case of an ARMA(''p+d'',''q'') process having the autoregressive polynomial with ''d'' unit roots. (For this reason, no process that is accurately described by an ARIMA model with ''d'' > 0 is wide-sense stationary.)

The above can be generalized as follows.

:$\left( 1 - \sum_^p \varphi_i L^i\right) (1-L)^d X_t = \delta + \left( 1 + \sum_^q \theta_i L^i \right) \varepsilon_t . \,$

This defines an ARIMA(''p'',''d'',''q'') process with drift $\frac$.

Other special forms

The explicit identification of the factorisation of the autoregression polynomial into factors as above, can be extended to other cases, firstly to apply to the moving average polynomial and secondly to include other special factors. For example, having a factor $( 1 - L^s)$ in a model is one way of including a non-stationary seasonality of period ''s'' into the model; this factor has the effect of re-expressing the data as changes from ''s'' periods ago. Another example is the factor $\left( 1 -\sqrt L + L^2 \right)$, which includes a (non-stationary) seasonality of period 2. The effect of the first type of factor is to allow each season's value to drift separately over time, whereas with the second type values for adjacent seasons move together.

Identification and specification of appropriate factors in an ARIMA model can be an important step in modelling as it can allow a reduction in the overall number of parameters to be estimated, while allowing the imposition on the model of types of behaviour that logic and experience suggest should be there.

Differencing

A stationary time series's properties do not depend on the time at which the series is observed. Specifically, for a wide-sense stationary time series, the mean and the variance/ autocovariance keep constant over time. Differencing in statistics is a transformation applied to a non-stationary time-series in order to make it stationary ''in the mean sense'' (viz., to remove the non-constant trend), but having nothing to do with the non-stationarity of the variance or autocovariance. Likewise, the seasonal differencing is applied to a seasonal time-series to remove the seasonal component. From the perspective of signal processing, especially the Fourier spectral analysis theory, the trend is the low-frequency part in the spectrum of a non-stationary time series, while the season is the periodic-frequency part in the spectrum of it. Therefore, the differencing works as a high-pass (i.e., low-stop) filter and the seasonal-differencing as a comb filter to suppress the low-frequency trend and the periodic-frequency season in the spectrum domain (rather than directly in the time domain), respectively.

To difference the data, the difference between consecutive observations is computed. Mathematically, this is shown as

:$y_t'= y_t - y_ \,$

Differencing removes the changes in the level of a time series, eliminating trend and seasonality and consequently stabilizing the mean of the time series.

Sometimes it may be necessary to difference the data a second time to obtain a stationary time series, which is referred to as second-order differencing:
:$\begin y_t^* & = y_t' - y_' \\ & =(y_t - y_)-(y_ - y_) \\ & =y_ t - 2y_ + y_ \end$

Another method of differencing data is seasonal differencing, which involves computing the difference between an observation and the corresponding observation in the previous season e.g a year. This is shown as:

:$y_t'= y_t - y_ \quad \text m=\text.$

The differenced data are then used for the estimation of an ARMA model.

Examples

Some well-known special cases arise naturally or are mathematically equivalent to other popular forecasting models. For example:
* An ARIMA(0, 1, 0) model (or model) is given by $X_t = X_ + \varepsilon_t$ — which is simply a random walk.
* An ARIMA(0, 1, 0) with a constant, given by $X_t = c + X_ + \varepsilon_t$ — which is a random walk with drift.
* An ARIMA(0, 0, 0) model is a white noise model.
* An ARIMA(0, 1, 2) model is a Damped Holt's model.
* An ARIMA(0, 1, 1) model without constant is a basic exponential smoothing model.
* An ARIMA(0, 2, 2) model is given by $X_t = 2X_ - X_ +(\alpha + \beta - 2) \varepsilon_ + (1-\alpha)\varepsilon_ + \varepsilon_$ — which is equivalent to Holt's linear method with additive errors, or double exponential smoothing.

Choosing the order

The order p and q can be determined using the sample autocorrelation function (ACF), partial autocorrelation function (PACF), and/or extended autocorrelation function (EACF) method.

Other alternative methods include AIC, BIC, etc. To determine the order of a non-seasonal ARIMA model, a useful criterion is the Akaike information criterion (AIC). It is written as

:$\text = -2\log(L)+2(p+q+k),$

where ''L ''is the likelihood of the data, ''p ''is the order of the autoregressive part and ''q ''is the order of the moving average part. The ''k'' represents the intercept of the ARIMA model. For AIC, if ''k'' = 1 then there is an intercept in the ARIMA model (''c ''≠ 0) and if ''k ''= 0 then there is no intercept in the ARIMA model (''c ''= 0).

The corrected AIC for ARIMA models can be written as

:$\text= \text+ \frac.$

The Bayesian Information Criterion (BIC) can be written as

:$\text= \text+((\log T)-2)(p+q+k).$

The objective is to minimize the AIC, AICc or BIC values for a good model. The lower the value of one of these criteria for a range of models being investigated, the better the model will suit the data. The AIC and the BIC are used for two completely different purposes. While the AIC tries to approximate models towards the reality of the situation, the BIC attempts to find the perfect fit. The BIC approach is often criticized as there never is a perfect fit to real-life complex data; however, it is still a useful method for selection as it penalizes models more heavily for having more parameters than the AIC would.

AICc can only be used to compare ARIMA models with the same orders of differencing. For ARIMAs with different orders of differencing, RMSE can be used for model comparison.

Estimation of coefficients

Forecasts using ARIMA models

The ARIMA model can be viewed as a "cascade" of two models. The first is non-stationary:

:$Y_t = (1-L)^d X_t$

while the second is wide-sense stationary:

:$\left( 1 - \sum_^p \varphi_i L^i \right) Y_t = \left( 1 + \sum_^q \theta_i L^i \right) \varepsilon_t \, .$

Now forecasts can be made for the process $Y_t$, using a generalization of the method of autoregressive forecasting.

Forecast intervals

The forecast intervals (confidence intervals for forecasts) for ARIMA models are based on assumptions that the residuals are uncorrelated and normally distributed. If either of these assumptions does not hold, then the forecast intervals may be incorrect. For this reason, researchers plot the ACF and histogram of the residuals to check the assumptions before producing forecast intervals.

95% forecast interval: $\hat_\pm1.96\sqrt$, where $v_$ is the variance of $y_ \mid y_1,\dots,y_T$.

For $h=1$, $v_=\hat^2$ for all ARIMA models regardless of parameters and orders.

For ARIMA(0,0,q), $y_t=e_t+\sum_^q\theta_ie_.$

: v_ = \hat^2 \left +\sum_^\theta_ie_\right \text h=2,3,\ldots

In general, forecast intervals from ARIMA models will increase as the forecast horizon increases.

Variations and extensions

A number of variations on the ARIMA model are commonly employed. If multiple time series are used then the $X_t$ can be thought of as vectors and a VARIMA model may be appropriate. Sometimes a seasonal effect is suspected in the model; in that case, it is generally considered better to use a SARIMA (seasonal ARIMA) model than to increase the order of the AR or MA parts of the model. If the time-series is suspected to exhibit long-range dependence, then the ''d'' parameter may be allowed to have non-integer values in an autoregressive fractionally integrated moving average model, which is also called a Fractional ARIMA (FARIMA or ARFIMA) model.

Software implementations

Various packages that apply methodology like Box–Jenkins parameter optimization are available to find the right parameters for the ARIMA model.

* EViews: has extensive ARIMA and SARIMA capabilities.
* Julia: contains an ARIMA implementation in the TimeModels package
* Mathematica: include
ARIMAProcess
function.
* MATLAB: th
Econometrics Toolbox
include

an

* NCSS: includes several procedures for ARIMA fitting and forecasting.
* Python: th
"statsmodels"
package includes models for time series analysis – univariate time series analysis: AR, ARIMA – vector autoregressive models, VAR and structural VAR – descriptive statistics and process models for time series analysis.
* R: the standard R ''stats'' package includes an ''arima'' function, which is documented i
"ARIMA Modelling of Time Series"
Besides the part, the function also includes seasonal factors, an intercept term, and exogenous variables (''xreg'', called "external regressors"). The CRAN task view o

is the reference with many more links. Th

package in R can automatically select an ARIMA model for a given time series with the function and can also simulate seasonal and non-seasonal ARIMA models with its function.
* Ruby: th
"statsample-timeseries"
gem is used for time series analysis, including ARIMA models and Kalman Filtering.
* JavaScript: th
"arima"
package includes models for time series analysis and forecasting (ARIMA, SARIMA, SARIMAX, AutoARIMA)
* C: th
"ctsa"
package includes ARIMA, SARIMA, SARIMAX, AutoARIMA and multiple methods for time series analysis.

SAFE TOOLBOXES
include

an


* SAS: includes extensive ARIMA processing in its Econometric and Time Series Analysis system: SAS/ETS.
* IBM SPSS: includes ARIMA modeling in its Statistics and Modeler statistical packages. The default Expert Modeler feature evaluates a range of seasonal and non-seasonal autoregressive (''p''), integrated (''d''), and moving average (''q'') settings and seven exponential smoothing models. The Expert Modeler can also transform the target time-series data into its square root or natural log. The user also has the option to restrict the Expert Modeler to ARIMA models, or to manually enter ARIMA nonseasonal and seasonal ''p'', ''d'', and ''q'' settings without Expert Modeler. Automatic outlier detection is available for seven types of outliers, and the detected outliers will be accommodated in the time-series model if this feature is selected.
* SAP: the APO-FCS package in SAP ERP from SAP allows creation and fitting of ARIMA models using the Box–Jenkins methodology.
* SQL Server Analysis Services: from Microsoft includes ARIMA as a Data Mining algorithm.
* Stata includes ARIMA modelling (using its arima command) as of Stata 9.

StatSim
includes ARIMA models in th
Forecast
web app.
*Teradata Vantage has the ARIMA function as part of its machine learning engine.
* TOL (Time Oriented Language) is designed to model ARIMA models (including SARIMA, ARIMAX and DSARIMAX variants


* Scala (programming language), Scala
spark-timeseries
library contains ARIMA implementation for Scala, Java and Python. Implementation is designed to run on Apache Spark.
* PostgreSQL/MadLib
Time Series Analysis/ARIMA

*X-12-ARIMA: from the US Bureau of the Census

See also

* Autocorrelation
* ARMA
* Partial autocorrelation
* Finite impulse response
* Infinite impulse response

References

Further reading

*
*
*

External links

The US Census Bureau uses ARIMA for "seasonally adjusted" data (programs, docs, and papers here)

{{Stochastic processes

Time series models

de:ARMA-Modell#ARIMA