|
Jackline
A jackline is a rope, wire or webbing strung from a ship's bow to stern to which a safety harness can be tethered, allowing a crewmember to move about the deck safely when there is risk of falling or being swept overboard. At sea, falling overboard is one of the leading causes of death in boating; fastening oneself to the ship with a safety harness tethered to a jackline reduces this risk. Generally, the jacklines are run from the bow to the stern on both the port and starboard side of a ship. Jack lines are used in heavy weather and in periods of reduced visibility, i.e. fog or at night. Jacklines may be rigged temporarily when bad weather is expected, or, especially on sailboats heading offshore, they may be left in place all the time and used as necessary. They are usually attached to strong padeye or cleat fittings at both ends of the boat, allowing the crewmember to move fore and aft by sliding their harness' clip along the line. Jacklines may be made of wire or low- ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Jackline At The Bow
A jackline is a rope, wire or webbing strung from a ship's bow to stern to which a safety harness can be tethered, allowing a crewmember to move about the deck safely when there is risk of falling or being swept overboard. At sea, falling overboard is one of the leading causes of death in boating; fastening oneself to the ship with a safety harness tethered to a jackline reduces this risk. Generally, the jacklines are run from the bow to the stern on both the port and starboard side of a ship. Jack lines are used in heavy weather and in periods of reduced visibility, i.e. fog or at night. Jacklines may be rigged temporarily when bad weather is expected, or, especially on sailboats heading offshore, they may be left in place all the time and used as necessary. They are usually attached to strong padeye or cleat fittings at both ends of the boat, allowing the crewmember to move fore and aft by sliding their harness' clip along the line. Jacklines may be made of wire or low-s ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Turtling (sailing)
In dinghy sailing, a boat is said to be turtling or to turn turtle when the boat is fully inverted with the mast pointing down to the lake bottom, riverbed, or seabed. The name stems from the appearance of the upside-down boat, similar to the carapace (top shell) of a sea turtle. at Internet ArchiveHowever, "to turn turtle" means putting a turtle on its back by grabbing it by the flipper, and conversely is used to refer to a vessel that has turned upside down, or which has cast off its crew. A related nautical turtle metaphor is the term Turtleback Deck or "''deck, turtle'' nautical: A term applied to a weather deck that is rounded over from the shell of the ship so that it has a shape similar to the back of a turtle. Used on ships of the whaleback type and on the forward weather deck of torpedo boats." The term can be applied to any vessel; turning turtle is less frequent but more dangerous on ships than on smaller boats.In larger vessels a capsize almost inevitably leads to ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Cleat (nautical)
In nautical contexts, a cleat is a device for securing a rope A rope is a group of yarns, plies, fibres, or strands that are twisted or braided together into a larger and stronger form. Ropes have tensile strength and so can be used for dragging and lifting. Rope is thicker and stronger than similarl .... Types Types of cleat designs include the following: * A horn cleat is the traditional design, featuring two “horns” extending parallel to the deck or the axis of the spar, attached to a flat surface or a spar, and resembling an anvil. * A cam cleat in which one or two spring-loaded cams pinch the rope, allowing the rope to be adjusted easily, and quickly released when under load. * A jam cleat in which the line is pinched in a v-shaped slot. * A clam cleat (or jam cleat) in which the rope is held between two fluted stationary pieces. Such a cleat vaguely resembles two halves of a clam shell held back to back. It is more compact than a cam cleat, but the rope is ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sailing Rigs And Rigging
Sailing employs the wind—acting on sails, wingsails or kites—to propel a craft on the surface of the ''water'' (sailing ship, sailboat, raft, windsurfer, or kitesurfer), on ''ice'' (iceboat) or on ''land'' (land yacht) over a chosen course, which is often part of a larger plan of navigation. From prehistory until the second half of the 19th century, sailing craft were the primary means of maritime trade and transportation; exploration across the seas and oceans was reliant on sail for anything other than the shortest distances. Naval power in this period used sail to varying degrees depending on the current technology, culminating in the gun-armed sailing warships of the Age of Sail. Sail was slowly replaced by steam as the method of propulsion for ships over the latter part of the 19th century – seeing a gradual improvement in the technology of steam through a number of stepwise developments. Steam allowed scheduled services that ran at higher average speeds than sailin ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Reefing
Reefing reduces the area of a sail, usually by folding or rolling one edge of the canvas in on itself and attaching the unused portion to a spar or a stay, as the primary measure to preserve a sailing vessel's stability in strong winds. Restoring full sail area is termed ''shaking out'' a reef. Whereas fore-and-aft rigged vessels store the unused portion of the sail on a boom, below the sail, square-rigged vessels stow the unused portion on a spar, above the sail. Reefing may occur by rolling the sail around its luff or foot, either on a rotating stay or within a spar. Fore-and-aft rigs Sails may have built-in alternative attachment points that allow their area to be reduced. In a mainsail, pairs of grommets, called reefing tacks, reefing clews, or reefing cringles may be installed in the sail; a cruising boat will typically have two to three pairs. Pulling these points down to the boom forms a new tack and clew, reducing the sail's area. Using the pair of grommets closest ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Mainsail
A mainsail is a sail rigged on the main mast of a sailing vessel. * On a square rigged vessel, it is the lowest and largest sail on the main mast. * On a fore-and-aft rigged vessel, it is the sail rigged aft of the main mast. The sail's foot is normally attached to a boom. (In extremely heavy weather, the mainsail may be lowered, and a much smaller trysail hoisted in its place). Historical fore-and-aft rigs used a four-sided gaff rigged mainsail, sometimes setting a gaff topsail above it. Whereas once the mainsail was typically the largest sail, today the mainsail may be smaller than the jib or genoa; Prout catamarans typically have a mainmast stepped further aft than in a standard sloop, so that the mainsail is much smaller than the foresail. Bermuda rig The modern Bermuda rig uses a triangular mainsail aft of the mast, closely coordinated with a jib for sailing upwind. A large overlapping jib or genoa is often larger than the mainsail. In downwind conditions (with ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sail Components
Sail components include the features that define a sail's shape and function, plus its constituent parts from which it is manufactured. A sail may be classified in a variety of ways, including by its orientation to the vessel (e.g. ''fore-and-aft'') and its shape, (e.g. ''(a)symmetrical'', ''triangular'', ''quadrilateral'', etc.). Sails are typically constructed out of flexible material that is shaped by various means, while in use, to offer an appropriate airfoil, according to the strength and apparent direction of the wind. A variety of features and fittings allow the sail to be attached to lines and spars. Whereas conventional sails form an airfoil with one layer of fabric, wingsails comprise a structure that has material on both sides to form an airfoil—much like a wing placed vertically on the vessel—and are beyond the scope of this article. Classifications Sails may be classified as either ''triangular'', which describes sails that either come to one point of suspen ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Blue Safety Line Tied Off To The Red Jackline With Clip
Blue is one of the three primary colours in the RYB colour model (traditional colour theory), as well as in the RGB (additive) colour model. It lies between violet and cyan on the spectrum of visible light. The eye perceives blue when observing light with a dominant wavelength between approximately 450 and 495 nanometres. Most blues contain a slight mixture of other colours; azure contains some green, while ultramarine contains some violet. The clear daytime sky and the deep sea appear blue because of an optical effect known as Rayleigh scattering. An optical effect called Tyndall effect explains blue eyes. Distant objects appear more blue because of another optical effect called aerial perspective. Blue has been an important colour in art and decoration since ancient times. The semi-precious stone lapis lazuli was used in ancient Egypt for jewellery and ornament and later, in the Renaissance, to make the pigment ultramarine, the most expensive of all pigments. In the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Nylon Webbing
red, blue and black auto_racing.html"_;"title="nylon_webbing_as_used_in_auto_racing">nylon_webbing_as_used_in_auto_racing_harnesses Webbing_is_a_strong_nylon_webbing_as_used_in_auto_racing_harnesses">auto_racing.html"_;"title="nylon_webbing_as_used_in_auto_racing">nylon_webbing_as_used_in_auto_racing_harnesses Webbing_is_a_strong_Textile">fabric_weaving.html" "title="Textile.html" "title="auto_racing_harnesses.html" ;"title="auto_racing.html" ;"title="nylon webbing as used in auto racing">nylon webbing as used in auto racing harnesses">auto_racing.html" ;"title="nylon webbing as used in auto racing">nylon webbing as used in auto racing harnesses Webbing is a strong Textile">fabric weaving">woven as a flat strip or tube of varying width and fibres, often used in place of rope. It is a versatile component used in climbing, slacklining, furniture manufacturing, automobile safety, auto racing, tow truck, towing, parachuting, military apparel, load securing, and many other fiel ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rope
A rope is a group of yarns, plies, fibres, or strands that are twisted or braided together into a larger and stronger form. Ropes have tensile strength and so can be used for dragging and lifting. Rope is thicker and stronger than similarly constructed cord, string, and twine. Construction Rope may be constructed of any long, stringy, fibrous material, but generally is constructed of certain natural or synthetic fibres. Synthetic fibre ropes are significantly stronger than their natural fibre counterparts, they have a higher tensile strength, they are more resistant to rotting than ropes created from natural fibres, and they can be made to float on water. But synthetic ropes also possess certain disadvantages, including slipperiness, and some can be damaged more easily by UV light. Common natural fibres for rope are Manila hemp, hemp, linen, cotton, coir, jute, straw, and sisal. Synthetic fibres in use for rope-making include polypropylene, nylon, polyes ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Wire
Overhead power cabling. The conductor consists of seven strands of steel (centre, high tensile strength), surrounded by four outer layers of aluminium (high conductivity). Sample diameter 40 mm A wire is a flexible strand of metal. Wire is commonly formed by drawing the metal through a hole in a die or draw plate. Wire gauges come in various standard sizes, as expressed in terms of a gauge number. Wires are used to bear mechanical loads, often in the form of wire rope. In electricity and telecommunications signals, a "wire" can refer to an electrical cable, which can contain a "solid core" of a single wire or separate strands in stranded or braided forms. Usually cylindrical in geometry, wire can also be made in square, hexagonal, flattened rectangular, or other cross-sections, either for decorative purposes, or for technical purposes such as high-efficiency voice coils in loudspeakers. Edge-wound coil springs, such as the Slinky toy, are made of special flatten ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Padeye
A padeye is a device often found on boats or ships that a line runs through or provides an attachment point. It is a kind of fairlead and often is bolted or welded to the deck or hull. It is also used in oil and gas projects to assist in the purpose of lifting. Detail It is made of steel plate with radius at one side. Lifting is done with the help of a D-shackle or sling, which fits into the hole of the padeye. There may be one or more circular plates (cheek plates) welded around the hole. Designing The following check should be done for the design of padeyes and to keep the stress less than the allowable stresses: At the hole: # Bearing stress # Shear stress # Tensile stress # Hertz bearing stress At the base # Shear stress Shear stress, often denoted by (Greek: tau), is the component of stress coplanar with a material cross section. It arises from the shear force, the component of force vector parallel to the material cross section. ''Normal stress'', on the ... # ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> Cleat (nautical)")
.png "Click for more on -> Reefing")
.jpg "Click for more on -> Wire")