A reverb effect, or reverb, is an
audio effect applied to a sound signal to simulate
reverberation.
It may be created through physical means, such as
echo chambers, or electronically through
audio signal processing
Audio signal processing is a subfield of signal processing that is concerned with the electronic manipulation of audio signals. Audio signals are electronic representations of sound waves— longitudinal waves which travel through air, consist ...
.
Echo chambers
The first reverb effects, introduced in the 1930s, were created by playing recordings through loudspeakers in reverberating spaces and recording the sound.
American Producer
Bill Putnam is credited for the first artistic use of artificial reverb in music, on the 1947 song "
Peg o' My Heart" by the
Harmonicats. Putnam placed a microphone and loudspeaker in the studio bathroom to create a natural
echo chamber, adding an "eerie dimension".
[
]
Plate reverb
A plate reverb system uses an electromechanical transducer
A transducer is a device that converts energy from one form to another. Usually a transducer converts a signal in one form of energy to a signal in another.
Transducers are often employed at the boundaries of automation, measurement, and cont ...
, similar to the driver in a loudspeaker, to create vibrations in a large plate of sheet metal. The plate's motion is picked up by one or more contact microphones whose output is an audio signal which may be added to the original "dry" signal. Plate reverb was introduced in the late 1950s by Elektromesstechnik with the EMT 140.[
]
Spring reverb
Spring reverbs, introduced by Bell Labs
Nokia Bell Labs, originally named Bell Telephone Laboratories (1925–1984),
then AT&T Bell Laboratories (1984–1996)
and Bell Labs Innovations (1996–2007),
is an American industrial research and scientific development company owned by mult ...
, use a set of springs mounted inside a box.[ They work similarly to plate reverb, with a transducer and pickup placed at either end of the spring.][ They were popular in the 1960s, and were first used by the Hammond company to add reverb to Hammond organs.][ They became popular with guitarists, including surf musicians such as Dick Dale,][ as they could easily be built into guitar amplifiers.][ They were also used by dub reggae musicians such as King Tubby.][ Laurens Hammond was granted a patent on a spring-based mechanical reverberation system in 1939.
]
Digital reverb
Digital reverb units simulate reverb by using multiple delay lines with fading trails, giving the impression of sound bouncing off surfaces. Some digital effects allow users to independently adjust early and late reflections.[ Digital reverb was introduced in 1976 by EMT with the EMT 250,][ and became popular in the 1980s.][
]
Gated reverb
Gated reverb combines reverb with a noise gate, creating a "large" sound with a short tail. It was pioneered by English recording engineer Hugh Padgham and drummer Phil Collins, and became a staple of 1980s pop music.[
]
Convolution reverb
Convolution uses impulse responses to record the reverberation of physical spaces and recreate them digitally. The first real-time convolution reverb processor, the DRE S777, was announced by Sony
, commonly stylized as SONY, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. As a major technology company, it operates as one of the world's largest manufacturers of consumer and professional ...
in 1999.[ Convolution reverb is often used in film production, with sound engineers recording impulse responses of sets and locations so sounds can be added in post-production with realistic reverberation.]
References
Audio effects
{{Music technology