Red Noise

]

In science, Brownian noise, also known as Brown noise or red noise, is the type of signal noise produced by Brownian motion, hence its alternative name of random walk noise. The term "Brown noise" does not come from the color, but after Robert Brown, who documented the erratic motion for multiple types of inanimate particles in water. The term "red noise" comes from the "white noise"/"white light" analogy; red noise is strong in longer wavelengths, similar to the red end of the visible spectrum.

Explanation

The graphic representation of the sound signal mimics a Brownian pattern. Its spectral density is inversely proportional to ''f'' ², meaning it has higher intensity at lower frequencies, even more so than pink noise. It decreases in intensity by 6 dB per octave (20 dB per decade) and, when heard, has a "damped" or "soft" quality compared to white and pink noise. The sound is a low roar resembling a waterfall or heavy rainfall. See also violet noise, which is a 6 dB ''increase'' per octave.

Strictly, Brownian motion has a Gaussian probability distribution, but "red noise" could apply to any signal with the 1/''f'' ² frequency spectrum.

Power spectrum

A Brownian motion, also called a Wiener process, is obtained as the integral of a white noise signal:

:$W(t) = \int_0^t \frac d\tau$

meaning that Brownian motion is the integral of the white noise $dW(t)$, whose power spectral density is flat:

: S_0 = \left, \mathcal\left frac\right\omega)\^2 = \text.

Note that here $\mathcal$ denotes the Fourier transform, and $S_0$ is a constant. An important property of this transform is that the derivative of any distribution transforms as

: \mathcal\left frac\right\omega) = i \omega \mathcal (t)\omega),

from which we can conclude that the power spectrum of Brownian noise is

: S(\omega) = \big, \mathcal (t)\omega)\big, ^2 = \frac.

An individual Brownian motion trajectory presents a spectrum $S(\omega)=S_0/\omega^2$, where the amplitude $S_0$ is a random variable, even in the limit of an infinitely long trajectory.

Production

Brown noise can be produced by integrating white noise.
That is, whereas (digital) white noise can be produced by randomly choosing each sample independently, Brown noise can be produced by adding a random offset to each sample to obtain the next one. A leaky integrator might be used in audio or electromagnetic applications to ensure the signal does not "wander off", that is, exceed the limits of the system's dynamic range.

Brown noise can also be computer-generated by first generating a white noise signal, Fourier-transforming it, then dividing the amplitudes of the different frequency components by the frequency (in one dimension), or by the frequency squared (in two dimensions) etc. Matlab programs are available to generate brown and other power-law coloured noise i
one
or
any number
of dimensions.

Sample

References

{{Noise

Noise (electronics)