Major thirds tuning

Among alternative tunings for guitar, a major-thirds tuning is a regular tuning in which each interval between successive open strings is a major third ("M3" in musical abbreviation). Other names for major-thirds tuning include major-third tuning, M3 tuning, all-thirds tuning, and augmented tuning. By definition, a major-third interval separates two notes that differ by exactly four semitones (one-third of the twelve-note octave).

The Spanish guitar's tuning mixes four perfect fourths (five semitones) and one major-third, the latter occurring between the G and B strings:
:E–A–D–''G''–''B''–E.
This tuning, which is used for acoustic and electric guitars, is called "''standard''" in English, a convention that is followed in this article. While standard tuning is irregular, mixing four fourths and one major third, M3 tunings are regular: Only major-third intervals occur between the successive strings of the M3 tunings, for example, the open augmented  C tuning.
:A–C–E–A–C–E.
For each M3 tuning, the open strings form an augmented triad in two octaves.

For guitars with six strings, every major-third tuning repeats its three open-notes in two octaves, so providing many options for fingering chords. By repeating open-string notes and by having uniform intervals between strings, major-thirds tuning simplifies learning by beginners. These features also facilitate advanced guitarists' improvisation, precisely the aim of jazz guitarist Ralph Patt when he began popularizing major-thirds tuning between 1963 and 1964.

Avoiding standard tuning's irregular intervals

In standard tuning, the successive open-strings mix two types of intervals, four perfect-fourths and the major third between the G and B strings:
:E2–A2–D3–''G3''–''B3''–E4.
Only major thirds occur as open-string intervals for major-thirds tuning, which is also called "''major-third'' tuning", "''all-thirds'' tuning", and "''M3'' tuning". The most viable M3 tunings are:

:*E2-G#2-C3-E3-G#3-C4
:*F2-A2-C#3-F3-A3-C#4
:*F#2-A#2-D3-F#3-A#3-D4
:*G2-B2-D#3-G3-B3-D#4
:*G#2-C3-E3-G#3-C4-E4

All of these tunings reduce the overall range of the instrument a bit: the first takes a M3 off the top of the range, and the last takes a M3 off the bottom of the range. One popular M3 tuning has the open strings:
:G2–C3–E3–G3–C4–E4,
which some guitarists have applied to the top six strings of a seven string guitar, with the low seventh string tuned to the low E, to restore the standard E–E range.
While M3 tuning can use standard sets of guitar strings, specialized string gauges have been recommended.
The middle tunings are a compromise, each losing a note or two off both the top and the bottom of the range. For example, for six-string guitars, the M3 tuning:
:F2–A2–D3–F3–A3–D4
loses the two lowest semitones on the low-E string and the two highest semitones from the high-E string in standard tuning; it can use string sets for standard tuning.

The tuning, G2-B2-D#3-G3-B3-D#4, preserves the G3-B3 major third interval of standard tuning. A guitarist accustomed to standard tuning will only need learn one new string: D#. A 7-string guitar tuned to D#2-G2-B2-D#3-G3-B3-D#4 has essentially the same range as a 6-string guitar at standard tuning (D#2-D#4 vs E2-E4) and is just one semitone different than the Russian guitar, which is tuned to Open G (D2-G2-B2-D3-G3-B3-D4). At the first fret, the range is D#2-G4. A capo can be used on the first fret to create open E or on the 3rd fret to create open A.

Regardless of which note is chosen to start the tuning sequence, there are only four distinct sets of open-note pitch classes. The major-thirds tunings respectively have the open notes : , , , and

Properties

Major-thirds tunings require less hand-stretching than other tunings, because each M3 tuning packs the octave's twelve notes into four consecutive frets. The major-third intervals allow major chords and minor chords to be played with two–three consecutive fingers on two consecutive frets. Every major-thirds tuning is regular and repetitive, two properties that facilitate learning by beginners and improvisation by advanced guitarists.

Four frets for the four fingers

In major-thirds tuning, the chromatic scale is arranged on three consecutive strings in four consecutive frets. This four-fret arrangement facilitates the left-hand technique for classical (Spanish) guitar: For each hand position of four frets, the hand is stationary and the fingers move, each finger being responsible for one fret. Consequently, three hand-positions (covering frets 1–4, 5–8, and 9–12) partition the fingerboard of classical guitar, which has exactly 12 frets.

Only two or three frets are needed for the guitar chords—major, minor, and dominant sevenths—which are emphasized in introductions to guitar-playing and to the fundamentals of music. Each major and minor chord can be played on two successive frets on three successive strings, and therefore each needs only two fingers. Other chords—seconds, fourths, sevenths, and ninths—are played on only three successive frets. For fundamental-chord fingerings, major-thirds tuning's simplicity and consistency are not shared by standard tuning, whose seventh-chord fingering is discussed at the end of this section.

Repetition

Each major-thirds tuning repeats its open notes after every two strings, which results in two copies of the three open strings' notes, each in a different octave. This repetition again simplifies the learning of chords and improvisation. This advantage is not shared by two popular regular-tunings, all-fourths and all-fifths tuning.

Chord inversion is especially simple in major-thirds tuning. Chords are inverted simply by raising one or two notes by three strings. The raised notes are played with the same finger as the original notes. Thus, major and minor chords are played on two frets in M3 tuning even when they are inverted. In contrast, inversions of chords in standard tuning require three fingers on a span of four frets, in standard tuning, the shape of inversions depends on the involvement of the irregular major-third.

Regular musical intervals

In each regular tuning, the musical intervals are the same for each pair of consecutive strings. Other regular tunings include all-fourths, augmented-fourths, and all-fifths tunings. For each regular tuning, chord patterns may be moved around the fretboard, a property that simplifies beginners' learning of chords and advanced players' improvisation.

In contrast, chords cannot be shifted around the fretboard in standard tuning, which requires four chord-shapes for the major chords: There are separate fingerings for chords having root notes on one of the four strings three–six.

Shifting chords: Vertical and diagonal

The repetition of the major-thirds tuning enables notes and chords to be raised one octave by being ''vertically'' shifted by three strings. Notes and chords may be shifted ''diagonally'' in major-thirds tuning, by combining a vertical shift of one string with a horizontal shift of four frets: "Like all regular tunings, chords in the major
third tuning can be moved across the fretboard (ascending or descending a major third for each
string)...."

In standard tuning, playing scales of one octave requires three patterns, which depend on the string of the root note. Chords cannot be shifted diagonally without changing finger-patterns. Standard tuning has four finger-patterns for musical intervals, four forms for basic major-chords, and three forms for the inversion of the basic major-chords.

Open chords and beginning players

Major-thirds tunings are unconventional open tunings, in which the open strings form an augmented triad. In M3 tunings, the ''augmented'' fifth replaces the ''perfect'' fifth of the major triad, which is used in conventional open-tunings. For example, the C-augmented triad (C, E, G) has a G in place of the C-major triad's G. (The note G is enharmonically equivalent to A, as noted above.) Consequently, M3 tunings are also called (open) ''augmented-fifth tunings'' (in French "''La guitare #5, majeure quinte augmentée''").

Instructional literature uses standard tuning. Traditionally a course begins with the hand in first position, that is, with the left-hand covering frets 1–4. Beginning players first learn open chords belonging to the major keys C, G, and D. Guitarists who play mainly open chords in these three major-keys and their relative minor-keys ( Am, Em, Bm) may prefer standard tuning over an M3 tuning. In particular, hobbyists playing folk music around a campfire are well served by standard tuning. Such hobbyists may also play major-thirds tuning, which also has many open chords with notes on five or six strings; chords with five-six strings have greater volume than chords with three-four strings and so are useful for acoustic guitars (for example, acoustic-electric guitars without amplification).

Intermediate guitarists do not limit themselves to one hand-position, and consequently open chords are only part of their chordal repertoire. In contemporary music, master guitarists "think diagonally and move up and down the strings"; fluency on the entire fretboard is needed particularly by guitarists playing jazz. According to its inventor, Ralph Patt, major-thirds tuning

makes the hard things easy and the easy things hard. ... This is never going to take the place of folk guitar, and it's not meant to. For difficult music, and for where we are going in free jazz and even the old be-bop jazz, this is a much easier way to play.

Left-handed chords

Major-thirds tuning is closely related to minor-sixths tuning, which is the regular tuning that is based on the minor sixth, the interval of eight semitones. Either ascending by a major third or by descending by a minor sixth, one arrives at the same pitch class, the same note representing pitches in different octaves. Intervals paired like the pair of major-third and minor-sixth intervals are termed " inverse intervals" in the theory of music. Consequently, chord charts for minor-sixths tunings may be used for left-handed major-thirds tunings; conversely, chord charts for major-thirds tunings may be used for left-handed minor-sixths tunings.

Fingering of seventh chords

Major-thirds tuning facilitates playing chords with closed voicings. In contrast, standard tuning would require more hand-stretching to play closed-voice seventh chords, and so standard tuning uses open voicings for many four-note chords, for example of dominant seventh chords. By definition, a ''dominant seventh'' is a four-note chord combining a major chord and a minor seventh. For example, the C7 seventh chord combines the C-major chord with B. In standard tuning, extending the root-bass C-major chord (C, E, G) to a C7 chord (C, E, G, B) would span six frets (3–8); such seventh chords "contain some pretty serious stretches in the left hand". An illustration shows this C7 voicing (C, E, G, B), which would be extremely difficult to play in standard tuning, besides the openly voiced C7-chord that is conventional in standard tuning: This open-position C7 chord is termed a second-inversion C7 drop 2 chord (C, G, B, E), because the second-highest note (C) in the second-inversion C7 chord (G, B, ''C'', E) is lowered by an octave.The illustration designates B by its enharmonic equivalent, A. Guitar fretboards use (twelve-tone) equal-temperament tuning, in which B and A denote the same pitch. These notes represent distinct pitches in tuning systems that are not equally tempered.

Ergonomic Advantages

* Each set of 4 frets on three adjacent strings contains the 12 semitones in one octave, greatly reducing the need for wider stretches.
* At the first fret position, pinky use can be avoided for all scales because notes at the 4th fret are repeated on the open strings.
* For each set of 4 frets on three adjacent strings, the 7 tones of a major scale are played twice by three fingers and once by one finger. By starting the root tone on the middle finger, one can minimize pinky use to only one note of that major scale. The root minor or major chord at the position requires only the index and middle finger frets.
* The distribution of notes in a major scale are more evenly distributed across strings and frets, reducing fatigue.
* The compact chord shapes make chords possible for guitarists with shorter fingers.
* The complete scale at any given fret reduces the need to switch position.
* The regularity of the fret board reduces mental effort.

Disadvantages

While major thirds tuning confers the numerous advantages detailed above, it also introduces certain disadvantages, as compared to the instrument's standard tuning:
:* M3 tuning decreases the overall range of the guitar (this is why some players eventually resorted to 7- and 8- string instruments, to regain that lost range)
:* M3 simplifies the voicing of chords in ''close harmony'', but it makes certain common voicings in ''open harmony'' more difficult, or even impossible
:* M3 facilitates moving 3- and 4-note chords up or down an octave, but it makes the fingerings for 5- and 6-note multi-octave chords more complex and awkward.

History

Major-thirds tuning was introduced in 1964 by jazz guitarist Ralph Patt. He was studying with Gunther Schuller, whose twelve-tone technique was invented for atonal composition by his teacher, Arnold Schoenberg. Patt was also inspired by the free jazz of Ornette Coleman and John Coltrane. Seeking a guitar tuning that would facilitate improvisation using twelve tones, he introduced major-thirds tuning by 1964, perhaps in 1963. To achieve the E−E open-string range of standard (Spanish) tuning, Patt started using seven-string guitars in 1963, before settling on eight-string guitars with high G ( equivalently A) as their highest open-notes. Patt used major-thirds tuning during all of his work as a session musician after 1965 in New York. Patt developed a webpage with extensive information about major-thirds tuning.

See also

* Minor-thirds tuning
* Repetitive open-tunings approximate M3 tunings:
** Non-Spanish classical guitars:
*** English: Its open-C tuning C–E–G–C–E–G approximates C–E–G–C–E–G
*** Russian: Its 7-string open-G tuning G–B–D–G–B–D–G approximates G–B–D–G–B–D–G
**Other open tunings
*** Open A tuning: E–A–C–E–A–C approximates F–A–C–F–A–C
*** Open B tuning: F–B–D–F–B–D approximates G–B–D–G–B–D
*** Open C tuning: C–E–G–C–E–G approximates C–E–G–C–E–G
*** Open D tuning: D–F–A–D–F–A approximates D–F–A–D–F–A
*** Open E tuning: E–G–B–E–G–B approximates E–G–C–E–G–C
*** Open F tuning: F–A–C–F–A–C approximates F–A–C–F–A–C
*** Open G tuning: G–B–D–G–B–D approximates G–B–D–G–B–D

References

Footnotes

Citations

Bibliography

*
*
*
*
*
*
*
*
*
*
*
*
*

Further reading

*

External links

*
* Professors Andreas Griewank and William Sethares each recommend discussions of major-thirds tuning by two jazz-guitarists, and :
** Ole Kirkeby fo
6- and 7-string guitars
Charts o

an


** Ralph Patt fo
6-, 7-, and 8-string guitars
Charts o

an
string gauges

* Three other jazz-guitar websites:
**
**
**
*
*
*

{{Guitar tunings, Regular

Regular guitar-tunings
Repetitive guitar-tunings
Jazz guitar