|
MalletKAT
The MalletKAT is a musical instrument in a class of MIDI percussion controllers which also includes the DrumKAT, DK10, and TrapKat. Description The Control Surface is a velocity-sensitive gum-rubber pad that has force-sensing resistors ( FSR) which detect and convert mechanical energy into electrical signals. The trigger pads are laid out like a conventional marimba. The MalletKAT is made by the company Alternate Mode. Alternate Mode also makes the DrumKAT, DK-10, TrapKAT, and the PanKAT. The MalletKAT is a MIDI controller which can be directed to a sound module and to an amp or to a computer with a MIDI interface if needed. Pedals are also provided with the MalletKAT. Controller The MalletKAT comes in three main models. The first, the MalletKAT Express, is a two-octave controller and is normally about ($1,500). The MalletKAT Pro is a three-octave controller and is usually ($2,100). Lastly, the MalletKAT Grand is a four-octave controller, usually comes in a gold plating, a ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Neil Peart
Neil Ellwood Peart OC (; September 12, 1952 – January 7, 2020) was a Canadian-American musician, best known as the drummer and primary lyricist of the rock band Rush. Peart earned numerous awards for his musical performances, including an induction into the '' Modern Drummer'' Readers Poll Hall of Fame in 1983 at the age of thirty, making him the youngest person ever so honoured. Known to fans by the nickname 'The Professor', his drumming was renowned for its technical proficiency and his live performances for their exacting nature and stamina. Peart was born in Hamilton, Ontario, and grew up in Port Dalhousie (now part of St. Catharines). During adolescence, he floated between regional bands in pursuit of a career as a full-time drummer. After a discouraging stint in England, Peart returned home to concentrate on music where he joined Rush, a Toronto band, in mid-1974, six years after its formation. Together they released nineteen studio albums, with ten exceeding a mil ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
MIDI Controller
A MIDI controller is any hardware or software that generates and transmits Musical Instrument Digital Interface (MIDI) data to MIDI-enabled devices, typically to trigger sounds and control parameters of an electronic music performance. They most often use a musical keyboard to send data about the pitch of notes to play, although a MIDI controller may trigger lighting and other effects. A wind controller has a sensor that converts breath pressure to volume information and lip pressure to control pitch. Controllers for percussion and stringed instruments exist, as well as specialized and experimental devices. Some MIDI controllers are used in association with specific digital audio workstation software. The original MIDI specification has been extended to include a greater range of control features. Features MIDI controllers usually do not create or produce musical sounds by themselves. MIDI controllers typically have some type of interface that the performer presses, strikes, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
MIDI
MIDI (; Musical Instrument Digital Interface) is a technical standard that describes a communications protocol, digital interface, and electrical connectors that connect a wide variety of electronic musical instruments, computers, and related audio devices for playing, editing, and recording music. The specification originates in the paper ''Universal Synthesizer Interface'' published by Dave Smith and Chet Wood of Sequential Circuits at the 1981 Audio Engineering Society conference in New York City. A single MIDI cable can carry up to sixteen channels of MIDI data, each of which can be routed to a separate device. Each interaction with a key, button, knob or slider is converted into a MIDI event, which specifies musical instructions, such as a note's pitch, timing and loudness. One common MIDI application is to play a MIDI keyboard or other controller and use it to trigger a digital sound module (which contains synthesized musical sounds) to generate sounds, wh ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Percussion
A percussion instrument is a musical instrument that is sounded by being struck or scraped by a beater including attached or enclosed beaters or rattles struck, scraped or rubbed by hand or struck against another similar instrument. Excluding zoomusicological instruments and the human voice, the percussion family is believed to include the oldest musical instruments.'' The Oxford Companion to Music'', 10th edition, p.775, In spite of being a very common term to designate instruments, and to relate them to their players, the percussionists, percussion is not a systematic classificatory category of instruments, as described by the scientific field of organology. It is shown below that percussion instruments may belong to the organological classes of ideophone, membranophone, aerophone and cordophone. The percussion section of an orchestra most commonly contains instruments such as the timpani, snare drum, bass drum, tambourine, belonging to the membranophones, an ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Force-Sensing Resistor
A force-sensing resistor is a material whose resistance changes when a force, pressure or mechanical stress is applied. They are also known as force-sensitive resistor and are sometimes referred to by the initialism FSR. History The technology of force-sensing resistors was invented and patented in 1977 by Franklin Eventoff. In 1985 Eventoff founded Interlink Electronics, a company based on his force-sensing-resistor (FSR). In 1987, Eventoff was the recipient of the prestigious international IR 100 award for the development of the FSR. In 2001 Eventoff founded a new company, Sensitronics, that he currently runs. Properties Force-sensing resistors consist of a conductive polymer, which changes resistance in a predictable manner following application of force to its surface. They are normally supplied as a polymer sheet or ink that can be applied by screen printing. The sensing film consists of both electrically conducting and non-conducting particles suspended in matr ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Trigger Pads
A stomp box (or stompbox) is a percussion instrument consisting of a small box placed under the foot, which is tapped or stamped on rhythmically to produce a sound similar to that of a bass drum. A stomp box allows a performer such as a singer or guitar player to create a simple rhythmic self-accompaniment. Stompboxes are most commonly used in American folk and blues music, but they are also used across the musical spectrum. There are commercially produced stomp boxes available, but performers often simply mount a dynamic microphone inside whatever wooden box they have handy. Some homemade stomp boxes include customized features such as a built-in preamp or equalizer. In 2010s-era use, a simple piezo transducer (or sometimes a microphone) is located inside the box to allow amplification of the stompbox's bass sound through the PA system or bass amplifier. Other stompboxes such as the PorchBoard Bass and the Peterman acoustic use magnetic sensors designed to produce low-e ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Marimba
The marimba () is a musical instrument in the percussion family that consists of wooden bars that are struck by mallets. Below each bar is a resonator pipe that amplifies particular harmonics of its sound. Compared to the xylophone, the timbre of the marimba is warmer, deeper, more resonant, and more pure. It also tends to have a lower range than that of a xylophone. Typically, the bars of a marimba are arranged chromatically, like the keys of a piano. The marimba is a type of idiophone. Today, the marimba is used as a solo instrument, or in ensembles like orchestras, marching bands (typically as a part of the front ensemble), percussion ensembles, brass and concert bands, and other traditional ensembles. Etymology and terminology The term ''marimba'' refers to both the traditional version of this instrument and its modern form. Its first documented use in the English language dates back to 1704. The term is of Bantu origin, deriving from the prefix meaning 'many' an ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Rush (band)
Rush was a Canadian rock band formed in 1968 in Toronto, that was comprised primarily of Geddy Lee (bass, vocals), Alex Lifeson (guitar), and Neil Peart (drums, percussion, lyricist). The band formed in Toronto in 1968 by Lifeson, drummer John Rutsey, and bass guitarist/vocalist Jeff Jones, who was immediately replaced by Lee. After Lee joined, the band went through several lineup configurations before arriving at its classic power trio lineup with the addition of Peart in July 1974, who replaced Rutsey four months after the release of their 1974 self-titled debut album; this lineup remained intact for the remainder of the band's career. Rush achieved commercial success in the 1970s with '' Fly by Night'' (1975), '' 2112'' (1976), '' A Farewell to Kings'' (1977) and '' Hemispheres'' (1978). The band's popularity continued throughout the 1980s and 1990s, with albums charting highly in Canada, the US and the UK, including '' Permanent Waves'' (1980), '' Moving Pictures'' (1 ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Sound Module
A sound module is an electronic musical instrument without a human-playable interface such as a piano-style musical keyboard. Sound modules have to be operated using an externally connected device, which is often a MIDI controller, of which the most common type is the musical keyboard. Another common way of controlling a sound module is through a sequencer, which is computer hardware or software designed to record and playback control information for sound-generating hardware. Connections between sound modules, controllers, and sequencers are generally made with MIDI (Musical Instrument Digital Interface), which is a standardized interface designed for this purpose. Sound modules are often rack-mountable, but are also produced in table-top form factor, particularly when the intended user is a DJ or record producer. The height of a sound module is often described in rack units. Small sound modules are mostly 1U in height, the larger models a multiplication e.g. 2U or 3U. ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Marimba Lumina
Marimba Lumina is a MIDI controller developed by American engineer Don Buchla that lets a musician play music via a control surface based on the layout of a marimba. Joel Davel and Mark Goldstein were the co-developers of the design and implementation of the hardware and software. The defining characteristic is its use of RF technology for the recognition of location along the key/bar and recognition of each of four mallets as a potentially unique input—allowing it to play stylistically conventional or unconventional music. The curved 4-1/3 octave Marimba Lumina "Gold" was first introduced in 1999 and played by Buchla “associate” Joel Davel at the Bell-Atlantic Jazz Festival in New York City. Later versions introduced in 2000 and 2001 were produced in collaboration with Nearfield Multimedia and include a 3.5 and 2.5 octave range. Performers known for playing the Marimba Lumina include Joel Davel of the Paul Dresher Ensemble, Vessela Stoyanova of Bury Me Standing and Goli, ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
