X-15

Design and development

Like many X-series aircraft, the X-15 was designed to be carried aloft and drop launched from under the wing of a B-52mother ship. Air Force NB-52A, "The High and Mighty One" (serial 52-0003), and NB-52B, "The Challenger" (serial 52-0008, also known as Balls 8) served as carrier planes for all X-15 flights. Release of the X-15 from NB-52A took place at an altitude of about 8.5 miles (45,000 ft; 13.7 km) and a speed of about 500 miles per hour (800 km/h). The X-15 fuselage was long and cylindrical, with rear fairings that flattened its appearance, and thick, dorsal and ventral wedge-fin stabilizers. Parts of the fuselage (the outer skin) were heat-resistant nickelalloy (Inconel-X 750). The retractable landing gear comprised a nose-wheel carriage and two rear skids. The skids did not extend beyond the ventral fin, which required the pilot to jettison the lower fin just before landing. The lower fin was recovered by parachute.