History
Vinyl siding was introduced to the exterior market in the late 1950s as a replacement for aluminum siding. It was first produced by an independently owned manufacturing plant called Crane Plastics inModern manufacture
Today, vinyl siding is manufactured by co-extrusion. Two layers of PVC are laid down in a continuous extrusion process; the top layer is weatherable and durable material, which comprises up to 25% of the siding thickness. This capstock can include about 10% titanium dioxide, depending on the color, which is a pigment and provides resistance to breakdown from UV light. Vinyl siding that is exposed to the sun will begin to fade over time. However, the fade rate is slower with vinyl than most other claddings. Most manufacturers offer 50 year warranties that their products will not fade much over that period of time. In the past darker colors tended to fade more than lighter ones, but advancements in technology and materials can mean this is no longer the case. The lower layer, known as substrate, is typically about 15% ground limestone (which is largely calcium carbonate). The limestone reduces cost, and also balances the titanium dioxide, keeping both extrusion streams equally fluid during manufacturing. A small quantity of tin mercaptan or butadiene is added as a stabilizer to chemically tie up any hydrochloric acid that is released into the PVC material as the siding ages. Lubricants are also added to aid in the manufacturing process.Should We Phase Out PVC?Specs and product variables
Vinyl siding can be observed in a wide range of product quality realized in a substantial difference in thickness and lasting durability. Thickness can vary from .035" in cheaper grade siding products up to .052" in the highest grade products which vary from manufacturer to manufacturer. Today, the thinnest vinyl siding commonly used is .040", and is known as "builder's grade". Vinyl product can vary in thickness even within one manufacturer up to .010" of thickness through varying product lines offered that range from basic to premium-grade products. Thicker vinyl products, usually realized in higher cost, are more rigid which can add to the aesthetic appeal and look of the installed, inherently flexible product and also add to durability and life expectancy. Thicker grades of vinyl siding ''may'', according to some, exhibit more resistance to the most common complaint about vinyl siding – its tendency to crack in very cold weather when it is struck or bumped by a hard object while others feel that a thinner product may allow more 'flex before cracking' and is a subject of debate. However, at "This Old House" website, this assertion about thickness and crack resistance is disputed. They claim to know of test results that indicate chemical makeup has a greater influence on impact resistance than does thickness. Chemical formulas can also vary somewhat from manufacturer to manufacturer which can impact life expectancy as formulas and possibly manufacture process can be one of the most important in terms of product quality and durability. One important advent was a UV "coating", utilized by some manufacturers that was applied to the surface of the product that filters out UV spectral light from the sun which would otherwise degrade the PVC more quickly. Vinyl siding is manufactured with its own partial fastening or locking system that is coupled with nails that 'loose' fasten the product to the exterior wall. This locking system can be either a rolled or an extruded lock depending on the manufacturing process, either of which has its own design considerations. This locking system, either extruded or rolled has a bottom lock which locks into either a start piece or onto the top lock of the panel below. The top lock is then 'loose' nailed to hold the panel to the wall. This 'loose' nailing allows for float which is created by expansion and contraction from varying temperature and weather conditions. With well designed siding, and proper 'loose nailing' installation, the siding can easily expand up, down, in and out, and left and right without restriction. Vinyl siding, by its nature, will tend to expand and contract more with temperature extremes than any other common type of cladding.Environmental aspects
Vinyl siding features a chlorine base, making it inherently slow to ignite and flame retardant. All organic materials (that is, anything containing carbon) will ignite, but the higher the temperature a material has to reach before it flames, the safer it is. PVC won't ignite, even from another flame, until it reaches about 730 °F (387 °C) and won't self-ignite until about 850 °F (454 °C). Those ignition temperatures are significantly higher than common framing lumber, which ignites from a flame at 500 °F (260 °C) and self-ignites at 770 °F (410 °C). Also, ASTM D2863 tests show that rigid PVC's high Limiting Oxygen Index means that it needs unusually high amounts of oxygen to burn and stay burning. Rigid PVC (vinyl siding) will not independently sustain combustion in air with a normal concentration of oxygen (about 21 percent) — so it extinguishes more easily.Concerns by Organizations
Because of its thin profile, vinyl siding may be more likely to ignite due to exterior fire; for example, theHealth Concerns
The PVC used in vinyl siding used to be produced in open vats until 1971, when angiosarcoma, a rareReferences
{{Reflist Building materials Types of wall