Velocity factor

The velocity factor (VF), also called wave propagation (relative) speed or (relative) velocity of propagation (VoP or of a transmission medium is the ratio of the speed at which a wavefront (of an electromagnetic signal, a radio signal, a light pulse in an optical fibre or a change of the electrical voltage on a copper wire) passes through the medium, to the speed of light in vacuum. For optical signals, the velocity factor is the reciprocal of the refractive index.

The speed of radio signals in vacuum, for example, is the speed of light, and so the velocity factor of a radio wave in vacuum is 1.0 (unity). In air, the velocity factor is ~0.9997. In electrical cables, the velocity factor mainly depends on the insulating material (see table below).

The use of the terms ''velocity of propagation'' and ''wave propagation speed'' to mean a ratio of speeds is confined to the computer networking and cable industries. In a general science and engineering context, these terms would be understood to mean a true speed or velocity in units of distance per time, while ''velocity factor'' is used for the ratio.

Typical velocity factors

Velocity factor is an important characteristic of communication media such as category 5 cables and radio transmission lines. Plenum data cable typically has a VF between 0.42 and 0.72 (42% to 72% of the speed of light in vacuum) and riser cable around 0.70 (approximately 210,000,000  m/s or 4.76  ns per metre).

:

Some typical velocity factors for radio communications cables provided in handbooks and texts are given in the following table:

:

Calculating velocity factor

Electric wave

VF equals the reciprocal of the square root of the dielectric constant (relative permittivity), $\kappa$ or $\epsilon_\mathrm$, of the material through which the signal passes:

:$\mathrm = \$

in the usual case where the relative permeability, $\mu_\mathrm$, is 1. In the most general case:

:$\mathrm = \$

which includes unusual magnetic conducting materials, such as ferrite.

The velocity factor for a lossless transmission line is given by:

:$\mathrm = \$

where $L'$ is the distributed inductance (in henries per unit length), $C'$ is the capacitance between the two conductors (in farads per unit length), and $c_\mathrm$ is the speed of light in vacuum.

Optical wave

VF equals the reciprocal of the refractive index $$ of the medium, usually optical fiber.

:$\mathrm = \$

See also

* Coaxial cable
* Propagation delay
* Signal velocity
* Speed of electricity
* Speed of sound
* Telegrapher's equations

References

{{Reflist

Electromagnetic radiation
Velocity