The VSR SR-1 Snoshoo () is an American

homebuilt Homebuilt machines are machines built outside of specialised workshops or factories. This can include different things such as kit cars or homebuilt computers, but normally it pertains to homebuilt aircraft, also known as amateur-built aircraft or ...

Formula One Formula One (F1) is the highest class of worldwide racing for open-wheel single-seater formula Auto racing, racing cars sanctioned by the Fédération Internationale de l'Automobile (FIA). The FIA Formula One World Championship has been one ...

racing aircraft Air racing is a type of motorsport that involves airplanes or other types of aircraft that compete over a fixed course, with the winner either returning the shortest time, the one to complete it with the most points, or to come closest to a pre ...

that was designed by Alan VanMeter and A.J. Smith and produced by VanMeter Smith Racing (VSR) of

Wichita, Kansas Wichita ( ) is the List of cities in Kansas, most populous city in the U.S. state of Kansas and the county seat of Sedgwick County, Kansas, Sedgwick County. As of the 2020 United States census, 2020 census, the population of the city was 397, ...

. It was designed in 1993 and first flown in 1997. The aircraft is supplied in the form of plans for amateur construction, with some key parts available to speed construction.Purdy, Don: ''AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition'', page 280. BAI Communications, 15 July 1998.

Design and development

The SR-1 Snoshoo features a cantilever

mid-wing A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple wings. A monoplane has inherently the highest efficiency and lowest drag of any wing config ...

, a single-seat enclosed cockpit under a

bubble canopy A bubble canopy is an aircraft canopy constructed without bracing, for the purpose of providing a wider unobstructed field of view to the pilot, often providing 360° all-round visibility. The designs of bubble canopies can vary drastically; so ...

, fixed

conventional landing gear Conventional landing gear, or tailwheel-type landing gear, is an aircraft Landing gear, undercarriage consisting of two main wheels forward of the Center of gravity of an aircraft, center of gravity and a small wheel or skid to support the tail ...

with

wheel pants An aircraft fairing is a structure whose primary function is to produce a smooth outline and reduce drag.Crane, Dale: ''Dictionary of Aeronautical Terms, Third Edition'', page 206. Aviation Supplies & Academics Inc, Newcastle Washington, 1997. ...

and a single engine in

tractor configuration In aviation, a tractor configuration is a propeller-driven fixed-wing aircraft with its engine mounted with the propeller in front, so that the aircraft is "pulled" through the air. This is the usual configuration; the pusher configuration ...

. The aircraft

fuselage The fuselage (; from the French language, French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds Aircrew, crew, passengers, or cargo. In single-engine aircraft, it will usually contain an Aircraft engine, engine as wel ...

is made from welded

4130 steel 41xx steel is a family of SAE steel grades, as specified by the Society of Automotive Engineers (SAE). Alloying elements include chromium and molybdenum, and as a result these materials are often informally referred to as chromoly steel (common va ...

tubing covered in

carbon-fiber-reinforced polymer Carbon fiber-reinforced polymers (American English), carbon-fibre-reinforced polymers ( Commonwealth English), carbon-fiber-reinforced plastics, carbon-fiber reinforced-thermoplastic (CFRP, CRP, CFRTP), also known as carbon fiber, carbon comp ...

fairings ahead of the wing and doped

aircraft fabric Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as are ...

aft. Its span wing is made from

Sitka spruce ''Picea sitchensis'', the Sitka spruce, is a large, coniferous, evergreen tree growing to just over tall, with a trunk diameter at breast height that can exceed 5 m (16 ft). It is by far the largest species of spruce and the fifth- ...

wood, has no flaps and has a wing area of . The cockpit width is . The acceptable power range is and the standard engine used is the Continental O-200A powerplant, as required by the Formula One rules. The aircraft is stressed to +/-8 g The SR-1 Snoshoo has a typical empty weight of and a gross weight of , giving a useful load of . With full fuel of the payload for the pilot and baggage is . The designers estimate the construction time from the supplied plans as 1500 hours.

Operational history

By 1998 the company reported that 20 kits and sets of plans had been sold. In March 2014 one example was

registered Registered may refer to: * Registered mail, letters, packets or other postal documents considered valuable and in need of a chain of custody * Registered trademark symbol, symbol ® that provides notice that the preceding is a trademark or service ...

in the United States with the

Federal Aviation Administration The Federal Aviation Administration (FAA) is a Federal government of the United States, U.S. federal government agency within the United States Department of Transportation, U.S. Department of Transportation that regulates civil aviation in t ...

Specifications (SR-1 Snoshoo)

References

External links

*{{Official website, http://snoshoo.com/
Official photos of the SR-1 prototype
Snoshoo 1990s United States sport aircraft Single-engined tractor aircraft Mid-wing aircraft Homebuilt aircraft Aircraft first flown in 1997